From: Ian Campbell <ian.campbell@citrix.com>
To: ian.jackson@eu.citrix.com, xen-devel@lists.xen.org
Cc: Ian Campbell <ian.campbell@citrix.com>
Subject: [PATCH OSSTEST v3 2/6] Add a flight to test seabios.org's master branch
Date: Thu, 15 May 2014 11:30:35 +0100 [thread overview]
Message-ID: <1400149839-8489-2-git-send-email-ian.campbell@citrix.com> (raw)
In-Reply-To: <1400149787.4386.29.camel@kazak.uk.xensource.com>
Most of this is the usual stuff for adding a new branch.
cr-daily-branch needed to set REVISION_SEABIOS for the seabios branch and leave
it blank for others (so that Config.mk's version will be used). ts-xen-build
already consumes the resulting version runvar but needed to be taught about the
tree URL runvar.
make-flight and mfi-common are updated to only build+test seabios on x86.
The new branch is added to cr-daily-branches.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
---
v3: - ap-push to refs/heads/...
v2: - finaled repo names on xenbits as /osstest/seabios.git
- stop trying to filter non-qemuu flights, there aren't many and getting
the right ones is tricky.
---
ap-common | 5 +++++
ap-fetch-version | 4 ++++
ap-fetch-version-old | 5 +++++
ap-print-url | 3 +++
ap-push | 5 +++++
cr-daily-branch | 12 ++++++++++++
cr-for-branches | 2 +-
cri-common | 1 +
make-flight | 6 ++++++
mfi-common | 5 ++++-
ts-xen-build | 3 +++
11 files changed, 49 insertions(+), 2 deletions(-)
diff --git a/ap-common b/ap-common
index b475156..36adf68 100644
--- a/ap-common
+++ b/ap-common
@@ -39,6 +39,10 @@
: ${TREE_GNULIB_LIBVIRT:=git://git.sv.gnu.org/gnulib.git}
+: ${TREE_SEABIOS:=git://git.seabios.org/seabios.git}
+: ${PUSH_TREE_SEABIOS:=$XENBITS:/home/xen/git/osstest/seabios.git}
+: ${BASE_TREE_SEABIOS:=git://xenbits.xen.org/osstest/seabios.git}
+
: ${TREE_LINUXFIRMWARE:=git://xenbits.xen.org/osstest/linux-firmware.git}
: ${PUSH_TREE_LINUXFIRMWARE:=$XENBITS:/home/osstest/ext/linux-firmware.git}
: ${UPSTREAM_TREE_LINUXFIRMWARE:=$GIT_KERNEL_ORG/pub/scm/linux/kernel/git/firmware/linux-firmware.git}
@@ -64,6 +68,7 @@ fi
: ${LOCALREV_LINUX:=daily-cron.$branch}
: ${LOCALREV_LIBVIRT:=daily-cron.$branch}
: ${LOCALREV_GNULIB_LIBVIRT:=daily-cron.$branch}
+: ${LOCALREV_SEABIOS:=daily-cron.$branch}
: ${TREEBASE_LINUX_XCP:=http://hg.uk.xensource.com/carbon/trunk/linux-2.6.27}
diff --git a/ap-fetch-version b/ap-fetch-version
index a4558ea..9f65fca 100755
--- a/ap-fetch-version
+++ b/ap-fetch-version
@@ -81,6 +81,10 @@ gnulib-libvirt)
repo_tree_rev_fetch_git gnulib-libvirt \
$TREE_GNULIB_LIBVIRT master $LOCALREV_GNULIB_LIBVIRT
;;
+seabios)
+ repo_tree_rev_fetch_git seabios \
+ $TREE_SEABIOS master $LOCALREV_SEABIOS
+ ;;
osstest)
if [ "x$OSSTEST_USE_HEAD" != "xy" ] ; then
git fetch $HOME/testing.git pretest:ap-fetch >&2
diff --git a/ap-fetch-version-old b/ap-fetch-version-old
index 41e3a58..968d4e3 100755
--- a/ap-fetch-version-old
+++ b/ap-fetch-version-old
@@ -28,6 +28,7 @@ select_xenbranch
: ${BASE_TAG_LINUX2639:=tested/2.6.39.x}
: ${BASE_LOCALREV_LINUX:=daily-cron.$branch.old}
: ${BASE_LOCALREV_LIBVIRT:=daily-cron.$branch.old}
+: ${BASE_LOCALREV_SEABIOS:=daily-cron.$branch.old}
: ${BASE_TREE_QEMU_UPSTREAM:=${TREE_QEMU_UPSTREAM/\/staging\//\/}}
@@ -86,6 +87,10 @@ gnulib-libvirt)
# No push gate, same as ap-fetch-version
./ap-fetch-version $branch
;;
+seabios)
+ repo_tree_rev_fetch_git seabios \
+ $BASE_TREE_SEABIOS xen-tested-master $BASE_LOCALREV_SEABIOS
+ ;;
osstest)
if [ "x$OSSTEST_USE_HEAD" != "xy" ] ; then
git fetch -f $HOME/testing.git incoming:ap-fetch
diff --git a/ap-print-url b/ap-print-url
index a21efce..637c9cc 100755
--- a/ap-print-url
+++ b/ap-print-url
@@ -55,6 +55,9 @@ libvirt)
gnulib-libvirt)
echo $TREE_GNULIB_LIBVIRT
;;
+seabios)
+ echo $TREE_SEABIOS
+ ;;
osstest)
echo none:;
;;
diff --git a/ap-push b/ap-push
index a9871f7..75be56c 100755
--- a/ap-push
+++ b/ap-push
@@ -34,6 +34,7 @@ TREE_QEMU_MAINLINE=$PUSH_TREE_QEMU_MAINLINE
TREE_QEMU_UPSTREAM=$XENBITS:/home/xen/git/qemu-upstream-${xenbranch#xen-}.git
TREE_XEN=$PUSH_TREE_XEN
TREE_LIBVIRT=$PUSH_TREE_LIBVIRT
+TREE_SEABIOS=$PUSH_TREE_SEABIOS
if info_linux_tree "$branch"; then
cd $repos/linux
@@ -87,6 +88,10 @@ gnulib-libvirt)
echo "gnulib-libvirt has not push gate, refusing to push" >&2
exit 1
;;
+seabios)
+ cd $repos/seabios
+ git push $TREE_SEABIOS $revision:refs/heads/xen-tested-master
+ ;;
osstest)
git push $HOME/testing.git $revision:incoming
git push $XENBITS:/home/xen/git/osstest.git $revision:master
diff --git a/cr-daily-branch b/cr-daily-branch
index 6231256..2cd6470 100755
--- a/cr-daily-branch
+++ b/cr-daily-branch
@@ -136,6 +136,14 @@ if [ "x$REVISION_LINUX_ARM" = x ]; then
export REVISION_LINUX_ARM
fi
fi
+if [ "x$REVISION_SEABIOS" = x ]; then
+ if [ "x$tree" = "xseabios" ]; then
+ determine_version REVISION_SEABIOS seabios
+ export REVISION_SEABIOS
+ else
+ : REVISION_SEABIOS from Config.mk
+ fi
+fi
if [ "x$REVISION_LIBVIRT" = x ]; then
determine_version REVISION_LIBVIRT libvirt
export REVISION_LIBVIRT
@@ -180,6 +188,10 @@ libvirt)
realtree=libvirt
NEW_REVISION=$REVISION_LIBVIRT
;;
+seabios)
+ realtree=seabios
+ NEW_REVISION=$REVISION_SEABIOS
+ ;;
*)
NEW_REVISION=''
wantpush=false
diff --git a/cr-for-branches b/cr-for-branches
index bded06f..5ed0a17 100755
--- a/cr-for-branches
+++ b/cr-for-branches
@@ -31,7 +31,7 @@ scriptoptions="$1"; shift
LOGFILE=tmp/cr-for-branches.log
export LOGFILE
-: ${BRANCHES:=osstest xen-4.0-testing xen-4.1-testing xen-4.2-testing xen-4.3-testing xen-4.4-testing xen-unstable qemu-mainline qemu-upstream-unstable qemu-upstream-4.2-testing qemu-upstream-4.3-testing qemu-upstream-4.4-testing linux-3.10 linux-3.4 linux-arm-xen ${EXTRA_BRANCHES}}
+: ${BRANCHES:=osstest xen-4.0-testing xen-4.1-testing xen-4.2-testing xen-4.3-testing xen-4.4-testing xen-unstable qemu-mainline qemu-upstream-unstable qemu-upstream-4.2-testing qemu-upstream-4.3-testing qemu-upstream-4.4-testing linux-3.10 linux-3.4 linux-arm-xen seabios ${EXTRA_BRANCHES}}
export BRANCHES
fetchwlem=$wlem
diff --git a/cri-common b/cri-common
index d901383..b180c4f 100644
--- a/cri-common
+++ b/cri-common
@@ -49,6 +49,7 @@ select_xenbranch () {
linux-*) tree=linux; xenbranch=xen-unstable ;;
linuxfirmware) tree=linuxfirmware; xenbranch=xen-unstable ;;
libvirt) tree=libvirt; xenbranch=xen-unstable ;;
+ seabios) tree=seabios; xenbranch=xen-unstable ;;
osstest) tree=osstest; xenbranch=xen-unstable ;;
esac
if [ "x$tree" = xlinux ]; then
diff --git a/make-flight b/make-flight
index dff82b0..06e4d28 100755
--- a/make-flight
+++ b/make-flight
@@ -67,6 +67,12 @@ job_create_test_filter_callback () {
libvirt)
if [ x$toolstack != xlibvirt ] ; then return 1; fi
;;
+ seabios)
+ case $xenarch in
+ amd64|i386) ;;
+ *) return 1;;
+ esac
+ ;;
*)
case "$job" in
*-qemuu-*)
diff --git a/mfi-common b/mfi-common
index 464001a..8845431 100644
--- a/mfi-common
+++ b/mfi-common
@@ -52,6 +52,7 @@ create_build_jobs () {
linux-mingo-tip-master) continue;;
linux-*) ;;
qemu-*) continue;;
+ seabios) continue;;
esac
case "$xenbranch" in
xen-3.*-testing) continue;;
@@ -131,12 +132,14 @@ create_build_jobs () {
tree_qemu=$TREE_QEMU \
tree_qemuu=$TREE_QEMU_UPSTREAM \
tree_xen=$TREE_XEN \
+ tree_seabios=$TREE_SEABIOS \
$RUNVARS $BUILD_RUNVARS $BUILD_XEN_RUNVARS $arch_runvars \
$suite_runvars \
host_hostflags=$build_hostflags \
revision_xen=$REVISION_XEN \
revision_qemu=$REVISION_QEMU \
- revision_qemuu=$REVISION_QEMU_UPSTREAM
+ revision_qemuu=$REVISION_QEMU_UPSTREAM \
+ revision_seabios=$REVISION_SEABIOS
if [ $build_extraxend = "true" ] ; then
./cs-job-create $flight build-$arch-xend build \
diff --git a/ts-xen-build b/ts-xen-build
index 7ac46ea..5a764fd 100755
--- a/ts-xen-build
+++ b/ts-xen-build
@@ -67,6 +67,9 @@ END
(nonempty($r{revision_qemuu}) ? <<END : '').
echo >>.config QEMU_UPSTREAM_REVISION='$r{revision_qemuu}'
END
+ (nonempty($r{tree_seabios}) ? <<END : '').
+ echo >>.config SEABIOS_UPSTREAM_URL='$r{tree_seabios}'
+END
(nonempty($r{revision_seabios}) ? <<END : '').
echo >>.config SEABIOS_UPSTREAM_TAG='$r{revision_seabios}'
END
--
1.9.0
next prev parent reply other threads:[~2014-05-15 10:30 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-15 10:29 [PATCH OSSTEST v3 0/6] test mainline qemu and seabios branches Ian Campbell
2014-05-15 10:30 ` [PATCH OSSTEST v3 1/6] Add a flight to test qemu.org's ("mainline") master branch Ian Campbell
2014-05-16 17:16 ` Ian Jackson
2014-05-15 10:30 ` Ian Campbell [this message]
2014-05-16 17:17 ` [PATCH OSSTEST v3 2/6] Add a flight to test seabios.org's " Ian Jackson
2014-05-15 10:30 ` [PATCH OSSTEST v3 3/6] ts-xen-build: stash the Xen and SeaBIOS .config's Ian Campbell
2014-05-16 17:17 ` Ian Jackson
2014-05-15 10:30 ` [PATCH OSSTEST v3 4/6] ts-xen-build: Move Xen build tree from xen-unstable to just xen Ian Campbell
2014-05-16 17:17 ` Ian Jackson
2014-05-15 10:30 ` [PATCH OSSTEST v3 5/6] standalone: allow making a baseline flight Ian Campbell
2014-05-16 17:18 ` Ian Jackson
2014-05-15 10:30 ` [PATCH OSSTEST v3 6/6] sg-run-job: check for prerequisite builds when running build jobs Ian Campbell
2014-05-16 17:19 ` Ian Jackson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1400149839-8489-2-git-send-email-ian.campbell@citrix.com \
--to=ian.campbell@citrix.com \
--cc=ian.jackson@eu.citrix.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).