From: Ian Campbell <ian.campbell@citrix.com>
To: tim@xen.org, stefano.stabellini@eu.citrix.com,
julien.grall@linaro.org, ian.jackson@eu.citrix.com
Cc: Ian Campbell <ian.campbell@citrix.com>, xen-devel@lists.xen.org
Subject: [PATCH v5 5/9] tools: arm: refactor code to setup guest p2m and fill it with RAM
Date: Thu, 22 May 2014 10:46:40 +0100 [thread overview]
Message-ID: <1400752004-9731-5-git-send-email-ian.campbell@citrix.com> (raw)
In-Reply-To: <1400751582.11409.46.camel@kazak.uk.xensource.com>
This will help when we have more guest RAM banks.
Mostly code motion of the p2m_host initialisation and allocation loop into the
new function populate_guest_memory, but in addition in the caller we now
initialise the p2m all the INVALID_MFN to handle any holes, although in this
patch we still fill in the entire allocated region.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
---
v4: Moved before "prepare for multiple banks of guest RAM" to allow for
refactoring of that patch.
Dropped unnecessary !nr_pfns early return from populate_guest_memory.
v2: New patch
---
tools/libxc/xc_dom_arm.c | 60 +++++++++++++++++++++++++++++++---------------
1 file changed, 41 insertions(+), 19 deletions(-)
diff --git a/tools/libxc/xc_dom_arm.c b/tools/libxc/xc_dom_arm.c
index 81d5fc7..f663206 100644
--- a/tools/libxc/xc_dom_arm.c
+++ b/tools/libxc/xc_dom_arm.c
@@ -248,16 +248,48 @@ static int set_mode(xc_interface *xch, domid_t domid, char *guest_type)
return rc;
}
+static int populate_guest_memory(struct xc_dom_image *dom,
+ xen_pfn_t base_pfn, xen_pfn_t nr_pfns)
+{
+ int rc;
+ xen_pfn_t allocsz, pfn;
+
+ DOMPRINTF("%s: populating RAM @ %016"PRIx64"-%016"PRIx64" (%"PRId64"MB)",
+ __FUNCTION__,
+ (uint64_t)base_pfn << XC_PAGE_SHIFT,
+ (uint64_t)(base_pfn + nr_pfns) << XC_PAGE_SHIFT,
+ (uint64_t)nr_pfns >> (20-XC_PAGE_SHIFT));
+
+ for ( pfn = 0; pfn < nr_pfns; pfn++ )
+ dom->p2m_host[pfn] = base_pfn + pfn;
+
+ for ( pfn = rc = allocsz = 0; (pfn < nr_pfns) && !rc; pfn += allocsz )
+ {
+ allocsz = nr_pfns - pfn;
+ if ( allocsz > 1024*1024 )
+ allocsz = 1024*1024;
+
+ rc = xc_domain_populate_physmap_exact(
+ dom->xch, dom->guest_domid, allocsz,
+ 0, 0, &dom->p2m_host[pfn]);
+ }
+
+ return rc;
+}
+
int arch_setup_meminit(struct xc_dom_image *dom)
{
int rc;
- xen_pfn_t pfn, allocsz, i;
+ xen_pfn_t pfn;
uint64_t modbase;
/* Convenient */
const uint64_t rambase = dom->rambase_pfn << XC_PAGE_SHIFT;
const uint64_t ramsize = dom->total_pages << XC_PAGE_SHIFT;
const uint64_t ramend = rambase + ramsize;
+
+ const xen_pfn_t p2m_size = dom->total_pages;
+
const uint64_t kernbase = dom->kernel_seg.vstart;
const uint64_t kernend = ROUNDUP(dom->kernel_seg.vend, 21/*2MB*/);
const uint64_t kernsize = kernend - kernbase;
@@ -289,27 +321,17 @@ int arch_setup_meminit(struct xc_dom_image *dom)
dom->shadow_enabled = 1;
- dom->p2m_host = xc_dom_malloc(dom, sizeof(xen_pfn_t) * dom->total_pages);
+ dom->p2m_host = xc_dom_malloc(dom, sizeof(xen_pfn_t) * p2m_size);
if ( dom->p2m_host == NULL )
return -EINVAL;
+ for ( pfn = 0; pfn < p2m_size; pfn++ )
+ dom->p2m_host[pfn] = INVALID_MFN;
- /* setup initial p2m */
- for ( pfn = 0; pfn < dom->total_pages; pfn++ )
- dom->p2m_host[pfn] = pfn + dom->rambase_pfn;
-
- /* allocate guest memory */
- for ( i = rc = allocsz = 0;
- (i < dom->total_pages) && !rc;
- i += allocsz )
- {
- allocsz = dom->total_pages - i;
- if ( allocsz > 1024*1024 )
- allocsz = 1024*1024;
-
- rc = xc_domain_populate_physmap_exact(
- dom->xch, dom->guest_domid, allocsz,
- 0, 0, &dom->p2m_host[i]);
- }
+ /* setup initial p2m and allocate guest memory */
+ if ((rc = populate_guest_memory(dom,
+ GUEST_RAM_BASE >> XC_PAGE_SHIFT,
+ ramsize >> XC_PAGE_SHIFT)))
+ return rc;
/*
* We try to place dtb+initrd at 128MB or if we have less RAM
--
1.7.10.4
next prev parent reply other threads:[~2014-05-22 9:46 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-22 9:39 [PATCH v5 0/9] xen: arm: support up to (almost) 1TB of guest RAM Ian Campbell
2014-05-22 9:46 ` [PATCH v5 1/9] tools: libxl: use uint64_t not unsigned long long for addresses Ian Campbell
2014-05-22 9:46 ` [PATCH v5 2/9] tools: arm: report an error if the guest RAM is too large Ian Campbell
2014-07-02 15:06 ` Ian Jackson
2014-05-22 9:46 ` [PATCH v5 3/9] tools: arm: move magic pfns out of guest RAM region Ian Campbell
2014-05-22 9:46 ` [PATCH v5 4/9] tools: arm: rearrange guest physical address space to increase max RAM Ian Campbell
2014-05-22 9:46 ` Ian Campbell [this message]
2014-05-22 16:50 ` [PATCH v5 5/9] tools: arm: refactor code to setup guest p2m and fill it with RAM Ian Jackson
2014-05-22 9:46 ` [PATCH v5 6/9] tools: arm: prepare domain builder for multiple banks of guest RAM Ian Campbell
2014-05-22 10:18 ` Julien Grall
2014-05-22 16:52 ` Ian Jackson
2014-05-22 9:46 ` [PATCH v5 7/9] tools: arm: prepare guest FDT building for multiple RAM banks Ian Campbell
2014-05-22 10:22 ` Julien Grall
2014-05-22 16:55 ` Ian Jackson
2014-05-23 8:43 ` Ian Campbell
2014-05-22 9:46 ` [PATCH v5 8/9] tools: arm: support up to (almost) 1TB of guest RAM Ian Campbell
2014-05-22 10:25 ` Julien Grall
2014-05-22 16:55 ` Ian Jackson
2014-05-22 9:46 ` [PATCH v5 9/9] tools: arm: increase size of region set aside for guest grant table Ian Campbell
2014-06-02 14:42 ` [PATCH v5 0/9] xen: arm: support up to (almost) 1TB of guest RAM Ian Campbell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1400752004-9731-5-git-send-email-ian.campbell@citrix.com \
--to=ian.campbell@citrix.com \
--cc=ian.jackson@eu.citrix.com \
--cc=julien.grall@linaro.org \
--cc=stefano.stabellini@eu.citrix.com \
--cc=tim@xen.org \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).