xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Boris Ostrovsky <boris.ostrovsky@oracle.com>
To: JBeulich@suse.com, kevin.tian@intel.com,
	dietmar.hahn@ts.fujitsu.com, suravee.suthikulpanit@amd.com
Cc: tim@xen.org, boris.ostrovsky@oracle.com, keir@xen.org,
	jun.nakajima@intel.com, xen-devel@lists.xen.org
Subject: [PATCH v7 14/19] x86/VPMU: Handle PMU interrupts for PV guests
Date: Fri,  6 Jun 2014 13:40:10 -0400	[thread overview]
Message-ID: <1402076415-26475-15-git-send-email-boris.ostrovsky@oracle.com> (raw)
In-Reply-To: <1402076415-26475-1-git-send-email-boris.ostrovsky@oracle.com>

Add support for handling PMU interrupts for PV guests.

VPMU for the interrupted VCPU is unloaded until the guest issues XENPMU_flush
hypercall. This allows the guest to access PMU MSR values that are stored in
VPMU context which is shared between hypervisor and domain, thus avoiding
traps to hypervisor.

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Dietmar Hahn <dietmar.hahn@ts.fujitsu.com>
Tested-by: Dietmar Hahn <dietmar.hahn@ts.fujitsu.com>
---
 xen/arch/x86/hvm/vpmu.c  | 134 +++++++++++++++++++++++++++++++++++++++++++++--
 xen/include/public/pmu.h |   7 +++
 2 files changed, 136 insertions(+), 5 deletions(-)

diff --git a/xen/arch/x86/hvm/vpmu.c b/xen/arch/x86/hvm/vpmu.c
index ca0534b..ce842e4 100644
--- a/xen/arch/x86/hvm/vpmu.c
+++ b/xen/arch/x86/hvm/vpmu.c
@@ -76,7 +76,12 @@ void vpmu_lvtpc_update(uint32_t val)
     struct vpmu_struct *vpmu = vcpu_vpmu(current);
 
     vpmu->hw_lapic_lvtpc = PMU_APIC_VECTOR | (val & APIC_LVT_MASKED);
-    apic_write(APIC_LVTPC, vpmu->hw_lapic_lvtpc);
+
+    /* Postpone APIC updates for PV(H) guests if PMU interrupt is pending */
+    if ( is_hvm_domain(current->domain) ||
+         !(current->arch.vpmu.xenpmu_data &&
+           (current->arch.vpmu.xenpmu_data->pmu_flags & PMU_CACHED)) )
+        apic_write(APIC_LVTPC, vpmu->hw_lapic_lvtpc);
 }
 
 int vpmu_do_wrmsr(unsigned int msr, uint64_t msr_content)
@@ -87,7 +92,23 @@ int vpmu_do_wrmsr(unsigned int msr, uint64_t msr_content)
         return 0;
 
     if ( vpmu->arch_vpmu_ops && vpmu->arch_vpmu_ops->do_wrmsr )
-        return vpmu->arch_vpmu_ops->do_wrmsr(msr, msr_content);
+    {
+        int ret = vpmu->arch_vpmu_ops->do_wrmsr(msr, msr_content);
+
+        /*
+         * We may have received a PMU interrupt during WRMSR handling
+         * and since do_wrmsr may load VPMU context we should save
+         * (and unload) it again.
+         */
+        if ( !is_hvm_domain(current->domain) &&
+             (current->arch.vpmu.xenpmu_data->pmu_flags & PMU_CACHED) )
+        {
+            vpmu_set(vpmu, VPMU_CONTEXT_SAVE);
+            vpmu->arch_vpmu_ops->arch_vpmu_save(current);
+            vpmu_reset(vpmu, VPMU_CONTEXT_SAVE | VPMU_CONTEXT_LOADED);
+        }
+        return ret;
+    }
     return 0;
 }
 
@@ -99,14 +120,109 @@ int vpmu_do_rdmsr(unsigned int msr, uint64_t *msr_content)
         return 0;
 
     if ( vpmu->arch_vpmu_ops && vpmu->arch_vpmu_ops->do_rdmsr )
-        return vpmu->arch_vpmu_ops->do_rdmsr(msr, msr_content);
+    {
+        int ret = vpmu->arch_vpmu_ops->do_rdmsr(msr, msr_content);
+
+        if ( !is_hvm_domain(current->domain) &&
+            (current->arch.vpmu.xenpmu_data->pmu_flags & PMU_CACHED) )
+        {
+            vpmu_set(vpmu, VPMU_CONTEXT_SAVE);
+            vpmu->arch_vpmu_ops->arch_vpmu_save(current);
+            vpmu_reset(vpmu, VPMU_CONTEXT_SAVE | VPMU_CONTEXT_LOADED);
+        }
+        return ret;
+    }
     return 0;
 }
 
+static struct vcpu *choose_dom0_vcpu(void)
+{
+    struct vcpu *v;
+    unsigned idx = smp_processor_id() % hardware_domain->max_vcpus;
+
+    v = hardware_domain->vcpu[idx];
+
+    /*
+     * If index is not populated search downwards the vcpu array until
+     * a valid vcpu can be found
+     */
+    while ( !v && idx-- )
+        v = hardware_domain->vcpu[idx];
+
+    return v;
+}
+
 int vpmu_do_interrupt(struct cpu_user_regs *regs)
 {
     struct vcpu *v = current;
-    struct vpmu_struct *vpmu = vcpu_vpmu(v);
+    struct vpmu_struct *vpmu;
+
+    /* dom0 will handle interrupt for special domains (e.g. idle domain) */
+    if ( v->domain->domain_id >= DOMID_FIRST_RESERVED )
+    {
+        v = choose_dom0_vcpu();
+        if ( !v )
+            return 0;
+    }
+
+    vpmu = vcpu_vpmu(v);
+    if ( !is_hvm_domain(v->domain) )
+    {
+        /* PV(H) guest or dom0 is doing system profiling */
+        const struct cpu_user_regs *gregs;
+        int err;
+
+        if ( v->arch.vpmu.xenpmu_data->pmu_flags & PMU_CACHED )
+            return 1;
+
+        if ( is_pvh_domain(current->domain) &&
+             !vpmu->arch_vpmu_ops->do_interrupt(regs) )
+            return 0;
+
+        /* PV guest will be reading PMU MSRs from xenpmu_data */
+        vpmu_set(vpmu, VPMU_CONTEXT_SAVE | VPMU_CONTEXT_LOADED);
+        err = vpmu->arch_vpmu_ops->arch_vpmu_save(v);
+        vpmu_reset(vpmu, VPMU_CONTEXT_SAVE | VPMU_CONTEXT_LOADED);
+
+        /* Store appropriate registers in xenpmu_data */
+        if ( is_pv_32bit_domain(current->domain) )
+        {
+            /*
+             * 32-bit dom0 cannot process Xen's addresses (which are 64 bit)
+             * and therefore we treat it the same way as a non-priviledged
+             * PV 32-bit domain.
+             */
+            struct compat_cpu_user_regs *cmp;
+
+            gregs = guest_cpu_user_regs();
+
+            cmp = (void *)&v->arch.vpmu.xenpmu_data->pmu.r.regs;
+            XLAT_cpu_user_regs(cmp, gregs);
+        }
+        else if ( !is_hardware_domain(current->domain) &&
+                 !is_idle_vcpu(current) )
+        {
+            /* PV(H) guest */
+            gregs = guest_cpu_user_regs();
+            memcpy(&v->arch.vpmu.xenpmu_data->pmu.r.regs,
+                   gregs, sizeof(struct cpu_user_regs));
+        }
+        else
+            memcpy(&v->arch.vpmu.xenpmu_data->pmu.r.regs,
+                   regs, sizeof(struct cpu_user_regs));
+
+        v->arch.vpmu.xenpmu_data->domain_id = current->domain->domain_id;
+        v->arch.vpmu.xenpmu_data->vcpu_id = current->vcpu_id;
+        v->arch.vpmu.xenpmu_data->pcpu_id = smp_processor_id();
+
+        v->arch.vpmu.xenpmu_data->pmu_flags |= PMU_CACHED;
+        apic_write(APIC_LVTPC, vpmu->hw_lapic_lvtpc | APIC_LVT_MASKED);
+        vpmu->hw_lapic_lvtpc |= APIC_LVT_MASKED;
+
+        send_guest_vcpu_virq(v, VIRQ_XENPMU);
+
+        return 1;
+    }
 
     if ( vpmu->arch_vpmu_ops )
     {
@@ -225,7 +341,9 @@ void vpmu_load(struct vcpu *v)
     local_irq_enable();
 
     /* Only when PMU is counting, we load PMU context immediately. */
-    if ( !vpmu_is_set(vpmu, VPMU_RUNNING) )
+    if ( !vpmu_is_set(vpmu, VPMU_RUNNING) ||
+         (!is_hvm_domain(v->domain) &&
+          vpmu->xenpmu_data->pmu_flags & PMU_CACHED) )
         return;
 
     if ( vpmu->arch_vpmu_ops && vpmu->arch_vpmu_ops->arch_vpmu_load )
@@ -463,6 +581,12 @@ long do_xenpmu_op(int op, XEN_GUEST_HANDLE_PARAM(xen_pmu_params_t) arg)
         vpmu_lvtpc_update(current->arch.vpmu.xenpmu_data->pmu.l.lapic_lvtpc);
         ret = 0;
         break;
+    case XENPMU_flush:
+        current->arch.vpmu.xenpmu_data->pmu_flags &= ~PMU_CACHED;
+        vpmu_lvtpc_update(current->arch.vpmu.xenpmu_data->pmu.l.lapic_lvtpc);
+        vpmu_load(current);
+        ret = 0;
+        break;
     }
 
     return ret;
diff --git a/xen/include/public/pmu.h b/xen/include/public/pmu.h
index 7341de9..67ce5de 100644
--- a/xen/include/public/pmu.h
+++ b/xen/include/public/pmu.h
@@ -28,6 +28,7 @@
 #define XENPMU_init            4
 #define XENPMU_finish          5
 #define XENPMU_lvtpc_set       6
+#define XENPMU_flush           7 /* Write cached MSR values to HW     */
 /* ` } */
 
 /* Parameters structure for HYPERVISOR_xenpmu_op call */
@@ -65,6 +66,12 @@ DEFINE_XEN_GUEST_HANDLE(xen_pmu_params_t);
  */
 #define XENPMU_FEATURE_INTEL_BTS  1
 
+/*
+ * PMU MSRs are cached in the context so the PV guest doesn't need to trap to
+ * the hypervisor
+ */
+#define PMU_CACHED 1
+
 /* Shared between hypervisor and PV domain */
 struct xen_pmu_data {
     uint32_t domain_id;
-- 
1.8.1.4

  parent reply	other threads:[~2014-06-06 17:40 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-06 17:39 [PATCH v7 00/19] x86/PMU: Xen PMU PV(H) support Boris Ostrovsky
2014-06-06 17:39 ` [PATCH v7 01/19] common/symbols: Export hypervisor symbols to privileged guest Boris Ostrovsky
2014-06-06 17:57   ` Andrew Cooper
2014-06-06 19:05     ` Boris Ostrovsky
2014-06-06 19:13       ` Andrew Cooper
2014-06-10 11:31   ` Jan Beulich
2014-06-06 17:39 ` [PATCH v7 02/19] VPMU: Mark context LOADED before registers are loaded Boris Ostrovsky
2014-06-06 17:59   ` Andrew Cooper
2014-06-10 15:29     ` Jan Beulich
2014-06-10 15:40       ` Boris Ostrovsky
2014-06-06 17:39 ` [PATCH v7 03/19] x86/VPMU: Set MSR bitmaps only for HVM/PVH guests Boris Ostrovsky
2014-06-06 18:02   ` Andrew Cooper
2014-06-06 19:07     ` Boris Ostrovsky
2014-06-06 17:40 ` [PATCH v7 04/19] x86/VPMU: Make vpmu marcos a bit more efficient Boris Ostrovsky
2014-06-06 18:13   ` Andrew Cooper
2014-06-06 19:28     ` Boris Ostrovsky
2014-06-06 17:40 ` [PATCH v7 05/19] intel/VPMU: Clean up Intel VPMU code Boris Ostrovsky
2014-06-06 18:34   ` Andrew Cooper
2014-06-06 19:43     ` Boris Ostrovsky
2014-06-10  8:19     ` Jan Beulich
2014-06-06 17:40 ` [PATCH v7 06/19] vmx: Merge MSR management routines Boris Ostrovsky
2014-06-11  9:55   ` Jan Beulich
2014-06-06 17:40 ` [PATCH v7 07/19] x86/VPMU: Handle APIC_LVTPC accesses Boris Ostrovsky
2014-06-06 17:40 ` [PATCH v7 08/19] intel/VPMU: MSR_CORE_PERF_GLOBAL_CTRL should be initialized to zero Boris Ostrovsky
2014-06-06 17:40 ` [PATCH v7 09/19] x86/VPMU: Add public xenpmu.h Boris Ostrovsky
2014-06-06 19:32   ` Andrew Cooper
2014-06-11 10:03   ` Jan Beulich
2014-06-11 12:32     ` Boris Ostrovsky
2014-06-06 17:40 ` [PATCH v7 10/19] x86/VPMU: Make vpmu not HVM-specific Boris Ostrovsky
2014-06-11 10:07   ` Jan Beulich
2014-06-11 13:57     ` Is: Reviewed-by, Acked-by rules. Was:Re: " Konrad Rzeszutek Wilk
2014-06-11 20:25       ` Jan Beulich
2014-06-12 11:10         ` George Dunlap
2014-06-12 16:21           ` Jan Beulich
2014-06-06 17:40 ` [PATCH v7 11/19] x86/VPMU: Interface for setting PMU mode and flags Boris Ostrovsky
2014-06-06 19:58   ` Andrew Cooper
2014-06-06 20:42     ` Boris Ostrovsky
2014-06-11 10:14   ` Jan Beulich
2014-06-17 15:01     ` Boris Ostrovsky
2014-06-17 15:14       ` Jan Beulich
2014-06-06 17:40 ` [PATCH v7 12/19] x86/VPMU: Initialize PMU for PV guests Boris Ostrovsky
2014-06-06 20:13   ` Andrew Cooper
2014-06-06 20:49     ` Boris Ostrovsky
2014-06-11 10:20   ` Jan Beulich
2014-06-11 12:49     ` Boris Ostrovsky
2014-06-11 12:53       ` Jan Beulich
2014-06-06 17:40 ` [PATCH v7 13/19] x86/VPMU: Add support for PMU register handling on " Boris Ostrovsky
2014-06-06 20:26   ` Andrew Cooper
2014-06-06 20:53     ` Boris Ostrovsky
2014-06-06 17:40 ` Boris Ostrovsky [this message]
2014-06-06 20:40   ` [PATCH v7 14/19] x86/VPMU: Handle PMU interrupts for " Andrew Cooper
2014-06-06 21:21     ` Boris Ostrovsky
2014-06-06 17:40 ` [PATCH v7 15/19] x86/VPMU: Merge vpmu_rdmsr and vpmu_wrmsr Boris Ostrovsky
2014-06-06 17:40 ` [PATCH v7 16/19] x86/VPMU: Add privileged PMU mode Boris Ostrovsky
2014-06-06 17:40 ` [PATCH v7 17/19] x86/VPMU: Save VPMU state for PV guests during context switch Boris Ostrovsky
2014-06-06 17:40 ` [PATCH v7 18/19] x86/VPMU: NMI-based VPMU support Boris Ostrovsky
2014-06-06 17:40 ` [PATCH v7 19/19] x86/VPMU: Move VPMU files up from hvm/ directory Boris Ostrovsky
2014-06-06 21:05   ` Andrew Cooper

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1402076415-26475-15-git-send-email-boris.ostrovsky@oracle.com \
    --to=boris.ostrovsky@oracle.com \
    --cc=JBeulich@suse.com \
    --cc=dietmar.hahn@ts.fujitsu.com \
    --cc=jun.nakajima@intel.com \
    --cc=keir@xen.org \
    --cc=kevin.tian@intel.com \
    --cc=suravee.suthikulpanit@amd.com \
    --cc=tim@xen.org \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).