From: Juergen Gross <jgross@suse.com>
To: stefan.bader@canonical.com, toshi.kani@hp.com,
linux-kernel@vger.kernel.org, xen-devel@lists.xensource.com,
konrad.wilk@oracle.com, ville.syrjala@linux.intel.com,
hpa@zytor.com, x86@kernel.org
Cc: Juergen Gross <jgross@suse.com>
Subject: [PATCH 2/3] x86: Enable PAT to use cache mode translation tables
Date: Tue, 26 Aug 2014 08:16:22 +0200 [thread overview]
Message-ID: <1409033783-12136-3-git-send-email-jgross@suse.com> (raw)
In-Reply-To: <1409033783-12136-1-git-send-email-jgross@suse.com>
Update the translation tables from cache mode to pgprot values according to
the PAT settings. This enables changing the cache attributes of a PAT index in
just one place without having to change at the users side.
With this change it is possible to use the same kernel with different PAT
configurations, e.g. supporting Xen.
Signed-off-by: Juergen Gross <jgross@suse.com>
---
arch/x86/include/asm/pat.h | 1 +
arch/x86/include/asm/pgtable_types.h | 4 +++
arch/x86/mm/init.c | 8 ++++++
arch/x86/mm/pat.c | 54 ++++++++++++++++++++++++++++++++++--
include/linux/mm.h | 1 +
5 files changed, 66 insertions(+), 2 deletions(-)
diff --git a/arch/x86/include/asm/pat.h b/arch/x86/include/asm/pat.h
index 150407a..91bc4ba 100644
--- a/arch/x86/include/asm/pat.h
+++ b/arch/x86/include/asm/pat.h
@@ -11,6 +11,7 @@ static const int pat_enabled;
#endif
extern void pat_init(void);
+void pat_init_cache_modes(void);
extern int reserve_memtype(u64 start, u64 end,
enum page_cache_mode req_pcm, enum page_cache_mode *ret_pcm);
diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index 0d38511..bd2f50f 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -338,6 +338,10 @@ extern uint8_t __pte2cachemode_tbl[8];
((((cb) >> (_PAGE_BIT_PAT - 2)) & 4) | \
(((cb) >> (_PAGE_BIT_PCD - 1)) & 2) | \
(((cb) >> _PAGE_BIT_PWT) & 1))
+#define __cm_idx2pte(i) \
+ ((((i) & 4) << (_PAGE_BIT_PAT - 2)) | \
+ (((i) & 2) << (_PAGE_BIT_PCD - 1)) | \
+ (((i) & 1) << _PAGE_BIT_PWT))
static inline unsigned long cachemode2protval(enum page_cache_mode pcm)
{
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index a9776ba..82b41d5 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -716,3 +716,11 @@ void __init zone_sizes_init(void)
free_area_init_nodes(max_zone_pfns);
}
+void update_cache_mode_entry(unsigned entry, enum page_cache_mode cache)
+{
+ /* entry 0 MUST be WB (hardwired to speed up translations) */
+ BUG_ON(!entry && cache != _PAGE_CACHE_MODE_WB);
+
+ __cachemode2pte_tbl[cache] = __cm_idx2pte(entry);
+ __pte2cachemode_tbl[entry] = cache;
+}
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index ef75f3f..feb4d30 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -75,6 +75,57 @@ enum {
PAT_UC_MINUS = 7, /* UC, but can be overriden by MTRR */
};
+/*
+ * Update the cache mode to pgprot translation tables according to PAT
+ * configuration.
+ * Using lower indices is preferred, so we start with highest index.
+ */
+void pat_init_cache_modes(void)
+{
+ int i;
+ enum page_cache_mode cache;
+ char pat_msg[33];
+ char *cache_mode;
+ u64 pat;
+
+ rdmsrl(MSR_IA32_CR_PAT, pat);
+ pat_msg[32] = 0;
+ for (i = 7; i >= 0; i--) {
+ switch ((pat >> (i * 8)) & 7) {
+ case PAT_UC:
+ cache = _PAGE_CACHE_MODE_UC;
+ cache_mode = "UC ";
+ break;
+ case PAT_WC:
+ cache = _PAGE_CACHE_MODE_WC;
+ cache_mode = "WC ";
+ break;
+ case PAT_WT:
+ cache = _PAGE_CACHE_MODE_WT;
+ cache_mode = "WT ";
+ break;
+ case PAT_WP:
+ cache = _PAGE_CACHE_MODE_WP;
+ cache_mode = "WP ";
+ break;
+ case PAT_WB:
+ cache = _PAGE_CACHE_MODE_WB;
+ cache_mode = "WB ";
+ break;
+ case PAT_UC_MINUS:
+ cache = _PAGE_CACHE_MODE_UC_MINUS;
+ cache_mode = "UC- ";
+ break;
+ default:
+ cache = _PAGE_CACHE_MODE_WB;
+ cache_mode = "WB ";
+ }
+ update_cache_mode_entry(i, cache);
+ memcpy(pat_msg + 4 * i, cache_mode, 4);
+ }
+ pr_info("PAT configuration [0-7]: %s\n", pat_msg);
+}
+
#define PAT(x, y) ((u64)PAT_ ## y << ((x)*8))
void pat_init(void)
@@ -124,8 +175,7 @@ void pat_init(void)
wrmsrl(MSR_IA32_CR_PAT, pat);
if (boot_cpu)
- printk(KERN_INFO "x86 PAT enabled: cpu %d, old 0x%Lx, new 0x%Lx\n",
- smp_processor_id(), boot_pat_state, pat);
+ pat_init_cache_modes();
}
#undef PAT
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 8981cc8..d7bf551 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -1574,6 +1574,7 @@ extern void free_area_init(unsigned long * zones_size);
extern void free_area_init_node(int nid, unsigned long * zones_size,
unsigned long zone_start_pfn, unsigned long *zholes_size);
extern void free_initmem(void);
+extern void update_cache_mode_entry(unsigned entry, enum page_cache_mode cache);
/*
* Free reserved pages within range [PAGE_ALIGN(start), end & PAGE_MASK)
--
1.8.4.5
next prev parent reply other threads:[~2014-08-26 6:16 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-26 6:16 [PATCH 0/3] x86: Full support of PAT Juergen Gross
2014-08-26 6:16 ` [PATCH 1/3] x86: Make page cache mode a real type Juergen Gross
2014-08-26 19:44 ` Toshi Kani
2014-08-27 4:07 ` [Xen-devel] " Juergen Gross
2014-08-26 6:16 ` Juergen Gross [this message]
2014-08-26 19:45 ` [PATCH 2/3] x86: Enable PAT to use cache mode translation tables Toshi Kani
2014-08-28 23:21 ` Toshi Kani
2014-08-29 4:08 ` Juergen Gross
2014-08-26 6:16 ` [PATCH 3/3] Support Xen pv-domains using PAT Juergen Gross
2014-08-26 10:59 ` [Xen-devel] " David Vrabel
2014-08-26 12:54 ` Juergen Gross
2014-08-26 18:48 ` [PATCH 0/3] x86: Full support of PAT Andy Lutomirski
2014-08-26 20:08 ` Toshi Kani
2014-08-26 20:23 ` Andy Lutomirski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409033783-12136-3-git-send-email-jgross@suse.com \
--to=jgross@suse.com \
--cc=hpa@zytor.com \
--cc=konrad.wilk@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stefan.bader@canonical.com \
--cc=toshi.kani@hp.com \
--cc=ville.syrjala@linux.intel.com \
--cc=x86@kernel.org \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).