From: Tiejun Chen <tiejun.chen@intel.com>
To: JBeulich@suse.com, ian.jackson@eu.citrix.com,
stefano.stabellini@eu.citrix.com, ian.campbell@citrix.com,
yang.z.zhang@intel.com, kevin.tian@intel.com,
andrew.cooper3@citrix.com
Cc: xen-devel@lists.xen.org
Subject: [v5][PATCH 01/10] xen:vtd:rmrr: export acpi_rmrr_units
Date: Tue, 26 Aug 2014 19:02:51 +0800 [thread overview]
Message-ID: <1409050980-21933-2-git-send-email-tiejun.chen@intel.com> (raw)
In-Reply-To: <1409050980-21933-1-git-send-email-tiejun.chen@intel.com>
We need to expose acpi_rmrr_units to make sure we can use
that somewhere else.
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
---
xen/drivers/passthrough/vtd/dmar.h | 16 +---------------
xen/drivers/passthrough/vtd/iommu.h | 1 -
xen/include/asm-x86/acpi.h | 17 +++++++++++++++++
3 files changed, 18 insertions(+), 16 deletions(-)
diff --git a/xen/drivers/passthrough/vtd/dmar.h b/xen/drivers/passthrough/vtd/dmar.h
index af1feef..1839ca2 100644
--- a/xen/drivers/passthrough/vtd/dmar.h
+++ b/xen/drivers/passthrough/vtd/dmar.h
@@ -24,6 +24,7 @@
#include <xen/list.h>
#include <xen/iommu.h>
#include <xen/kexec.h>
+#include <asm/acpi.h>
/* This one is for interrupt remapping */
struct acpi_ioapic_unit {
@@ -52,12 +53,6 @@ struct acpi_hpet_unit {
};
};
-struct dmar_scope {
- DECLARE_BITMAP(buses, 256); /* buses owned by this unit */
- u16 *devices; /* devices owned by this unit */
- int devices_cnt;
-};
-
struct acpi_drhd_unit {
struct dmar_scope scope;
struct list_head list;
@@ -69,15 +64,6 @@ struct acpi_drhd_unit {
struct list_head hpet_list;
};
-struct acpi_rmrr_unit {
- struct dmar_scope scope;
- struct list_head list;
- u64 base_address;
- u64 end_address;
- u16 segment;
- u8 allow_all:1;
-};
-
struct acpi_atsr_unit {
struct dmar_scope scope;
struct list_head list;
diff --git a/xen/drivers/passthrough/vtd/iommu.h b/xen/drivers/passthrough/vtd/iommu.h
index 6b2cf1a..741e62b 100644
--- a/xen/drivers/passthrough/vtd/iommu.h
+++ b/xen/drivers/passthrough/vtd/iommu.h
@@ -482,7 +482,6 @@ struct qinval_entry {
#define MAX_IOMMU_REGS 0xc0
extern struct list_head acpi_drhd_units;
-extern struct list_head acpi_rmrr_units;
extern struct list_head acpi_ioapic_units;
struct qi_ctrl {
diff --git a/xen/include/asm-x86/acpi.h b/xen/include/asm-x86/acpi.h
index 5e85b38..b3c9e90 100644
--- a/xen/include/asm-x86/acpi.h
+++ b/xen/include/asm-x86/acpi.h
@@ -28,6 +28,7 @@
#include <acpi/pdc_intel.h>
#include <acpi/acconfig.h>
#include <acpi/actbl.h>
+#include <xen/list.h>
#define COMPILER_DEPENDENT_INT64 long long
#define COMPILER_DEPENDENT_UINT64 unsigned long long
@@ -141,6 +142,21 @@ struct acpi_sleep_info {
bool_t sleep_extended;
};
+struct dmar_scope {
+ DECLARE_BITMAP(buses, 256); /* buses owned by this unit */
+ u16 *devices; /* devices owned by this unit */
+ int devices_cnt;
+};
+
+struct acpi_rmrr_unit {
+ struct dmar_scope scope;
+ struct list_head list;
+ u64 base_address;
+ u64 end_address;
+ u16 segment;
+ u8 allow_all:1;
+};
+
#endif /* CONFIG_ACPI_SLEEP */
#define MAX_MADT_ENTRIES MAX(256, 2 * NR_CPUS)
@@ -164,4 +180,5 @@ void hvm_acpi_sleep_button(struct domain *d);
void save_rest_processor_state(void);
void restore_rest_processor_state(void);
+extern struct list_head acpi_rmrr_units;
#endif /*__X86_ASM_ACPI_H*/
--
1.9.1
next prev parent reply other threads:[~2014-08-26 11:02 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-26 11:02 [v5][PATCH 0/10] xen: reserve RMRR to avoid conflicting MMIO/RAM Tiejun Chen
2014-08-26 11:02 ` Tiejun Chen [this message]
2014-08-26 11:02 ` [v5][PATCH 02/10] xen:vtd:rmrr: introduce acpi_rmrr_unit_entries Tiejun Chen
2014-08-26 11:02 ` [v5][PATCH 03/10] xen:x86: define a new hypercall to get RMRR mappings Tiejun Chen
2014-08-26 12:02 ` Andrew Cooper
2014-08-26 12:37 ` Jan Beulich
2014-08-27 1:37 ` Chen, Tiejun
2014-08-27 6:51 ` Jan Beulich
2014-08-27 7:21 ` Chen, Tiejun
2014-08-28 2:24 ` Chen, Tiejun
2014-08-28 6:50 ` Jan Beulich
2014-08-28 7:09 ` Chen, Tiejun
2014-08-28 7:19 ` Chen, Tiejun
2014-08-28 7:29 ` Chen, Tiejun
2014-08-28 7:44 ` Jan Beulich
2014-08-29 3:02 ` Chen, Tiejun
2014-08-29 9:18 ` Jan Beulich
2014-09-01 9:44 ` Chen, Tiejun
2014-09-01 10:29 ` Jan Beulich
2014-09-02 9:59 ` Chen, Tiejun
2014-09-02 10:15 ` Jan Beulich
2014-09-02 11:10 ` Chen, Tiejun
2014-09-02 13:15 ` Jan Beulich
2014-09-03 1:45 ` Chen, Tiejun
2014-09-03 8:31 ` Chen, Tiejun
2014-09-03 8:41 ` Jan Beulich
2014-09-03 8:59 ` Chen, Tiejun
2014-09-03 9:01 ` Chen, Tiejun
2014-09-03 9:54 ` Chen, Tiejun
2014-09-03 12:54 ` Jan Beulich
2014-09-04 1:15 ` Chen, Tiejun
2014-09-03 8:35 ` Jan Beulich
2014-08-27 1:15 ` Chen, Tiejun
2014-09-02 8:25 ` Jan Beulich
2014-08-26 11:02 ` [v5][PATCH 04/10] tools:libxc: introduce hypercall for xc_reserved_device_memory_map Tiejun Chen
2014-08-26 11:02 ` [v5][PATCH 05/10] tools:libxc: check if mmio BAR is out of RMRR mappings Tiejun Chen
2014-08-26 11:02 ` [v5][PATCH 06/10] hvm_info_table: introduce nr_reserved_device_memory_map Tiejun Chen
2014-09-02 8:34 ` Jan Beulich
2014-09-04 2:07 ` Chen, Tiejun
2014-09-04 6:32 ` Jan Beulich
2014-09-04 6:55 ` Chen, Tiejun
[not found] ` <54082E3B0200007800030BCB@mail.emea.novell.com>
2014-09-09 6:40 ` Chen, Tiejun
2014-08-26 11:02 ` [v5][PATCH 07/10] xen:x86:: support xc_reserved_device_memory_map in compat case Tiejun Chen
2014-09-02 8:35 ` Jan Beulich
2014-09-04 2:13 ` Chen, Tiejun
2014-08-26 11:02 ` [v5][PATCH 08/10] tools:firmware:hvmloader: introduce hypercall for xc_reserved_device_memory_map Tiejun Chen
2014-09-02 8:37 ` Jan Beulich
2014-08-26 11:02 ` [v5][PATCH 09/10] tools:firmware:hvmloader: check to reserve RMRR mappings in e820 Tiejun Chen
2014-09-02 8:47 ` Jan Beulich
2014-09-04 3:04 ` Chen, Tiejun
2014-09-04 4:32 ` Chen, Tiejun
2014-09-04 6:36 ` Jan Beulich
2014-08-26 11:03 ` [v5][PATCH 10/10] xen:vtd: make USB RMRR mapping safe Tiejun Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409050980-21933-2-git-send-email-tiejun.chen@intel.com \
--to=tiejun.chen@intel.com \
--cc=JBeulich@suse.com \
--cc=andrew.cooper3@citrix.com \
--cc=ian.campbell@citrix.com \
--cc=ian.jackson@eu.citrix.com \
--cc=kevin.tian@intel.com \
--cc=stefano.stabellini@eu.citrix.com \
--cc=xen-devel@lists.xen.org \
--cc=yang.z.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).