* How to intercept supervisor call using Xen?
@ 2014-09-03 1:12 harry2845
0 siblings, 0 replies; 3+ messages in thread
From: harry2845 @ 2014-09-03 1:12 UTC (permalink / raw)
To: xen-devel
After reading the document of ARM, I set HCR.TGE to 1 at the init time.
WRITE_SYSREG(HCR_TGE|HCR_PTW|HCR_BSU_OUTER|HCR_AMO|HCR_IMO|HCR_VM|HCR_TWI|HCR_TSC|
HCR_TAC, HCR_EL2);
And I add a case in the function do_trap_hyperviosr.
But after modifying, there will be a kernel panic when I execute Xen.
[ 7.866384] Kernel panic - not syncing: Attempted to kill init!
exitcode=0x0000000b
[ 7.866384]
[ 7.881866] CPU: 0 PID: 1 Comm: init Not tainted 3.15.0-rc5+ #91
[ 7.891024] [<80017dc4>] (unwind_backtrace) from [<800138f8>]
(show_stack+0x20/0x24)
[ 7.903640] [<800138f8>] (show_stack) from [<807864a4>]
(dump_stack+0x70/0xc0)
[ 7.915213] [<807864a4>] (dump_stack) from [<80781030>]
(panic+0x9c/0x204)
[ 7.926088] [<80781030>] (panic) from [<8002c900>] (do_exit+0x86c/0x9f0)
[ 7.936615] [<8002c900>] (do_exit) from [<8002cbc0>]
(do_group_exit+0x4c/0xcc)
[ 7.948188] [<8002cbc0>] (do_group_exit) from [<8003b5dc>]
(get_signal_to_deliver+0x37c/0x71c)
[ 7.962535] [<8003b5dc>] (get_signal_to_deliver) from [<80780aec>]
(do_signal+0xb4/0x380)
[ 7.976013] [<80780aec>] (do_signal) from [<800131a8>]
(do_work_pending+0x8c/0xe0)
[ 7.988278] [<800131a8>] (do_work_pending) from [<8000f680>]
(work_pending+0xc/0x20)
[ 8.000901] ---[ end Kernel panic - not syncing: Attempted to kill init!
exitcode=0x0000000b
[ 8.000901]
--
View this message in context: http://xen.1045712.n5.nabble.com/How-to-intercept-supervisor-call-using-Xen-tp5724551.html
Sent from the Xen - Dev mailing list archive at Nabble.com.
^ permalink raw reply [flat|nested] 3+ messages in thread* How to intercept supervisor call using Xen?
@ 2014-09-02 1:51 harry S
2014-09-03 9:06 ` Ian Campbell
0 siblings, 1 reply; 3+ messages in thread
From: harry S @ 2014-09-02 1:51 UTC (permalink / raw)
To: xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 1371 bytes --]
After reading the document of ARM, I set HCR.TGE to 1 at the init time.
WRITE_SYSREG(HCR_TGE|HCR_PTW|HCR_BSU_OUTER|HCR_AMO|HCR_IMO|HCR_VM|HCR_TWI|HCR_TSC|
HCR_TAC, HCR_EL2);
And I add a case in the function do_trap_hyperviosr.
But after modifying, there will be a kernel panic when I execute Xen.
[ 7.866384] Kernel panic - not syncing: Attempted to kill init!
exitcode=0x0000000b
[ 7.866384]
[ 7.881866] CPU: 0 PID: 1 Comm: init Not tainted 3.15.0-rc5+ #91
[ 7.891024] [<80017dc4>] (unwind_backtrace) from [<800138f8>]
(show_stack+0x20/0x24)
[ 7.903640] [<800138f8>] (show_stack) from [<807864a4>]
(dump_stack+0x70/0xc0)
[ 7.915213] [<807864a4>] (dump_stack) from [<80781030>]
(panic+0x9c/0x204)
[ 7.926088] [<80781030>] (panic) from [<8002c900>] (do_exit+0x86c/0x9f0)
[ 7.936615] [<8002c900>] (do_exit) from [<8002cbc0>]
(do_group_exit+0x4c/0xcc)
[ 7.948188] [<8002cbc0>] (do_group_exit) from [<8003b5dc>]
(get_signal_to_deliver+0x37c/0x71c)
[ 7.962535] [<8003b5dc>] (get_signal_to_deliver) from [<80780aec>]
(do_signal+0xb4/0x380)
[ 7.976013] [<80780aec>] (do_signal) from [<800131a8>]
(do_work_pending+0x8c/0xe0)
[ 7.988278] [<800131a8>] (do_work_pending) from [<8000f680>]
(work_pending+0xc/0x20)
[ 8.000901] ---[ end Kernel panic - not syncing: Attempted to kill init!
exitcode=0x0000000b
[ 8.000901]
[-- Attachment #1.2: Type: text/html, Size: 5819 bytes --]
[-- Attachment #2: Type: text/plain, Size: 126 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: How to intercept supervisor call using Xen?
2014-09-02 1:51 harry S
@ 2014-09-03 9:06 ` Ian Campbell
0 siblings, 0 replies; 3+ messages in thread
From: Ian Campbell @ 2014-09-03 9:06 UTC (permalink / raw)
To: harry S; +Cc: xen-devel
On Tue, 2014-09-02 at 09:51 +0800, harry S wrote:
> After reading the document of ARM, I set HCR.TGE to 1 at the init
> time.
>
> WRITE_SYSREG(HCR_TGE|HCR_PTW|HCR_BSU_OUTER|HCR_AMO|HCR_IMO|HCR_VM|
> HCR_TWI|HCR_TSC|
> HCR_TAC, HCR_EL2);
>
> And I add a case in the function do_trap_hyperviosr.
>
Setting HCR.TGE requires handling a number of general exceptions.
Without more information on what exactly you have done (i.e. the patch
itself) we can't offer any more advice than you are handling something
wrongly.
BTW, HCR.TGE is rather expensive (since it does trap all sorts of
things, including VM controls etc).
Ian.
> But after modifying, there will be a kernel panic when I execute Xen.
>
> [ 7.866384] Kernel panic - not syncing: Attempted to kill init!
> exitcode=0x0000000b
> [ 7.866384]
> [ 7.881866] CPU: 0 PID: 1 Comm: init Not tainted 3.15.0-rc5+ #91
> [ 7.891024] [<80017dc4>] (unwind_backtrace) from [<800138f8>]
> (show_stack+0x20/0x24)
> [ 7.903640] [<800138f8>] (show_stack) from [<807864a4>] (dump_stack
> +0x70/0xc0)
> [ 7.915213] [<807864a4>] (dump_stack) from [<80781030>] (panic
> +0x9c/0x204)
> [ 7.926088] [<80781030>] (panic) from [<8002c900>] (do_exit
> +0x86c/0x9f0)
> [ 7.936615] [<8002c900>] (do_exit) from [<8002cbc0>] (do_group_exit
> +0x4c/0xcc)
> [ 7.948188] [<8002cbc0>] (do_group_exit) from [<8003b5dc>]
> (get_signal_to_deliver+0x37c/0x71c)
> [ 7.962535] [<8003b5dc>] (get_signal_to_deliver) from [<80780aec>]
> (do_signal+0xb4/0x380)
> [ 7.976013] [<80780aec>] (do_signal) from [<800131a8>]
> (do_work_pending+0x8c/0xe0)
> [ 7.988278] [<800131a8>] (do_work_pending) from [<8000f680>]
> (work_pending+0xc/0x20)
> [ 8.000901] ---[ end Kernel panic - not syncing: Attempted to kill
> init! exitcode=0x0000000b
> [ 8.000901]
>
>
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xen.org
> http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-09-03 9:06 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-09-03 1:12 How to intercept supervisor call using Xen? harry2845
-- strict thread matches above, loose matches on Subject: below --
2014-09-02 1:51 harry S
2014-09-03 9:06 ` Ian Campbell
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).