From: Chao Peng <chao.p.peng@linux.intel.com>
To: xen-devel@lists.xen.org
Cc: keir@xen.org, Ian.Campbell@citrix.com,
stefano.stabellini@eu.citrix.com, George.Dunlap@eu.citrix.com,
andrew.cooper3@citrix.com, Ian.Jackson@eu.citrix.com,
JBeulich@suse.com, dgdegra@tycho.nsa.gov
Subject: [PATCH v15 08/11] x86: enable QoS monitoring for each domain RMID
Date: Fri, 5 Sep 2014 16:37:26 +0800 [thread overview]
Message-ID: <1409906249-6057-9-git-send-email-chao.p.peng@linux.intel.com> (raw)
In-Reply-To: <1409906249-6057-1-git-send-email-chao.p.peng@linux.intel.com>
If the QoS monitoring service is attached to a domain, its related RMID
will be set to hardware for monitoring when the domain's vcpu is
scheduled in. When the domain's vcpu is scheduled out, RMID 0
(system reserved) will be set for monitoring.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
---
xen/arch/x86/domain.c | 5 +++++
xen/arch/x86/pqos.c | 27 +++++++++++++++++++++++++++
xen/include/asm-x86/msr-index.h | 3 +++
xen/include/asm-x86/pqos.h | 1 +
4 files changed, 36 insertions(+)
diff --git a/xen/arch/x86/domain.c b/xen/arch/x86/domain.c
index 99fce11..bb448ef 100644
--- a/xen/arch/x86/domain.c
+++ b/xen/arch/x86/domain.c
@@ -1415,6 +1415,8 @@ static void __context_switch(void)
{
memcpy(&p->arch.user_regs, stack_regs, CTXT_SWITCH_STACK_BYTES);
vcpu_save_fpu(p);
+ if ( pqos_monitor_enabled() )
+ pqos_monitor_assoc_rmid(0);
p->arch.ctxt_switch_from(p);
}
@@ -1439,6 +1441,9 @@ static void __context_switch(void)
}
vcpu_restore_fpu_eager(n);
n->arch.ctxt_switch_to(n);
+
+ if ( pqos_monitor_enabled() && n->domain->arch.pqos_rmid > 0 )
+ pqos_monitor_assoc_rmid(n->domain->arch.pqos_rmid);
}
gdt = !is_pv_32on64_vcpu(n) ? per_cpu(gdt_table, cpu) :
diff --git a/xen/arch/x86/pqos.c b/xen/arch/x86/pqos.c
index 885bd9b..8a8e0b2 100644
--- a/xen/arch/x86/pqos.c
+++ b/xen/arch/x86/pqos.c
@@ -20,9 +20,15 @@
#define PQOS_MONITOR (1<<0)
+struct pqr_assoc {
+ uint64_t val;
+ bool_t initialized;
+};
+
struct pqos_monitor *__read_mostly pqosm = NULL;
static bool_t __initdata opt_pqos = 0;
static unsigned int __initdata opt_rmid_max = 255;
+static DEFINE_PER_CPU(struct pqr_assoc, pqr_assoc);
static void __init parse_pqos_param(char *s)
{
@@ -143,6 +149,27 @@ void pqos_monitor_free_rmid(struct domain *d)
d->arch.pqos_rmid = 0;
}
+void pqos_monitor_assoc_rmid(unsigned int rmid)
+{
+ uint64_t val;
+ uint64_t new_val;
+ struct pqr_assoc *pqr = &this_cpu(pqr_assoc);
+
+ if ( !pqr->initialized )
+ {
+ rdmsrl(MSR_IA32_PQR_ASSOC, pqr->val);
+ pqr->initialized = 1;
+ }
+ val = pqr->val;
+
+ new_val = (val & ~pqosm->rmid_mask) | (rmid & pqosm->rmid_mask);
+ if ( val != new_val )
+ {
+ wrmsrl(MSR_IA32_PQR_ASSOC, new_val);
+ pqr->val = new_val;
+ }
+}
+
/*
* Local variables:
* mode: C
diff --git a/xen/include/asm-x86/msr-index.h b/xen/include/asm-x86/msr-index.h
index da732b7..0cf9548 100644
--- a/xen/include/asm-x86/msr-index.h
+++ b/xen/include/asm-x86/msr-index.h
@@ -328,6 +328,9 @@
#define MSR_IA32_TSC_DEADLINE 0x000006E0
#define MSR_IA32_ENERGY_PERF_BIAS 0x000001b0
+/* Platform QoS MSRs */
+#define MSR_IA32_PQR_ASSOC 0x00000c8f
+
/* Intel Model 6 */
#define MSR_P6_EVNTSEL0 0x00000186
#define MSR_P6_EVNTSEL1 0x00000187
diff --git a/xen/include/asm-x86/pqos.h b/xen/include/asm-x86/pqos.h
index 5737b51..31b26b4 100644
--- a/xen/include/asm-x86/pqos.h
+++ b/xen/include/asm-x86/pqos.h
@@ -48,6 +48,7 @@ static inline bool_t pqos_monitor_enabled(void)
void init_platform_qos(void);
int pqos_monitor_alloc_rmid(struct domain *d);
void pqos_monitor_free_rmid(struct domain *d);
+void pqos_monitor_assoc_rmid(unsigned int rmid);
#endif /* __ASM_PQOS_H__ */
--
1.7.9.5
next prev parent reply other threads:[~2014-09-05 8:37 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-05 8:37 [PATCH v15 00/11] enable Cache QoS Monitoring (CQM) feature Chao Peng
2014-09-05 8:37 ` [PATCH v15 01/11] multicall: add no preemption ability between two calls Chao Peng
2014-09-05 10:46 ` Andrew Cooper
2014-09-09 6:43 ` Chao Peng
2014-09-09 10:39 ` Jan Beulich
2014-09-09 10:51 ` Andrew Cooper
2014-09-09 11:51 ` Jan Beulich
2014-09-09 12:44 ` Andrew Cooper
2014-09-09 13:15 ` Jan Beulich
2014-09-10 1:32 ` Chao Peng
2014-09-10 9:43 ` Andrew Cooper
2014-09-10 10:07 ` Jan Beulich
2014-09-10 10:15 ` Andrew Cooper
2014-09-10 10:25 ` Jan Beulich
2014-09-10 11:12 ` Andrew Cooper
2014-09-12 2:55 ` Chao Peng
2014-09-17 9:22 ` Chao Peng
2014-09-17 9:44 ` Jan Beulich
2014-09-18 13:45 ` Chao Peng
2014-09-18 14:22 ` Jan Beulich
2014-09-05 8:37 ` [PATCH v15 02/11] x86: add generic resource (e.g. MSR) access hypercall Chao Peng
2014-09-05 10:59 ` Andrew Cooper
2014-09-05 11:49 ` Jan Beulich
2014-09-10 2:55 ` Chao Peng
2014-09-29 18:52 ` Konrad Rzeszutek Wilk
2014-09-30 7:45 ` Jan Beulich
2014-09-05 8:37 ` [PATCH v15 03/11] xsm: add resource operation related xsm policy Chao Peng
2014-09-05 8:37 ` [PATCH v15 04/11] tools: provide interface for generic resource access Chao Peng
2014-09-05 8:37 ` [PATCH v15 05/11] x86: detect and initialize Platform QoS Monitoring feature Chao Peng
2014-09-05 11:05 ` Andrew Cooper
2014-09-05 8:37 ` [PATCH v15 06/11] x86: dynamically attach/detach QoS monitoring service for a guest Chao Peng
2014-09-05 8:37 ` [PATCH v15 07/11] x86: collect global QoS monitoring information Chao Peng
2014-09-05 8:37 ` Chao Peng [this message]
2014-09-05 8:37 ` [PATCH v15 09/11] x86: add QoS monitoring related MSRs in allowed list Chao Peng
2014-09-05 8:37 ` [PATCH v15 10/11] xsm: add platform QoS related xsm policies Chao Peng
2014-09-05 8:37 ` [PATCH v15 11/11] tools: CMDs and APIs for Platform QoS Monitoring Chao Peng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409906249-6057-9-git-send-email-chao.p.peng@linux.intel.com \
--to=chao.p.peng@linux.intel.com \
--cc=George.Dunlap@eu.citrix.com \
--cc=Ian.Campbell@citrix.com \
--cc=Ian.Jackson@eu.citrix.com \
--cc=JBeulich@suse.com \
--cc=andrew.cooper3@citrix.com \
--cc=dgdegra@tycho.nsa.gov \
--cc=keir@xen.org \
--cc=stefano.stabellini@eu.citrix.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).