From: Tamas K Lengyel <tklengyel@sec.in.tum.de>
To: xen-devel@lists.xen.org
Cc: ian.campbell@citrix.com, tim@xen.org, julien.grall@linaro.org,
ian.jackson@eu.citrix.com, stefano.stabellini@citrix.com,
andres@lagarcavilla.org, jbeulich@suse.com,
dgdegra@tycho.nsa.gov, Tamas K Lengyel <tklengyel@sec.in.tum.de>
Subject: [PATCH v5 17/17] tools/tests: Enable xen-access on ARM
Date: Wed, 10 Sep 2014 15:28:46 +0200 [thread overview]
Message-ID: <1410355726-5599-18-git-send-email-tklengyel@sec.in.tum.de> (raw)
In-Reply-To: <1410355726-5599-1-git-send-email-tklengyel@sec.in.tum.de>
On ARM the guest memory doesn't start from 0 and has multiple banks
of memory, thus we adjust the setting/unsetting routines accordingly.
We also define the ARM specific test_and_set_bit function.
Signed-off-by: Tamas K Lengyel <tklengyel@sec.in.tum.de>
---
v5: - Use the new information returned by getdomaininfo, max_gpfn, to
set access permissions. On ARM this will include the potential
memory hole as well which the hypervisor just loops over.
v4: - Take into account multiple guest ram banks on ARM.
- Move HAS_MEM_ACCESS definition into config/*.mk and only compile
xen-access when it is defined.
- Pass CONFIG_X86/CONFIG_ARM flags during compilation in xen-access
Makefile.
---
config/arm32.mk | 1 +
config/arm64.mk | 1 +
config/x86_32.mk | 2 ++
config/x86_64.mk | 2 ++
tools/tests/xen-access/Makefile | 9 ++++--
tools/tests/xen-access/xen-access.c | 60 ++++++++++++++++++++++++++++---------
xen/arch/arm/Rules.mk | 1 -
xen/arch/x86/Rules.mk | 1 -
8 files changed, 59 insertions(+), 18 deletions(-)
diff --git a/config/arm32.mk b/config/arm32.mk
index aa79d22..4a7c259 100644
--- a/config/arm32.mk
+++ b/config/arm32.mk
@@ -13,6 +13,7 @@ HAS_PL011 := y
HAS_EXYNOS4210 := y
HAS_OMAP := y
HAS_NS16550 := y
+HAS_MEM_ACCESS := y
# Use only if calling $(LD) directly.
LDFLAGS_DIRECT += -EL
diff --git a/config/arm64.mk b/config/arm64.mk
index 15b57a4..ea6558d 100644
--- a/config/arm64.mk
+++ b/config/arm64.mk
@@ -8,6 +8,7 @@ CFLAGS += #-marm -march= -mcpu= etc
HAS_PL011 := y
HAS_NS16550 := y
+HAS_MEM_ACCESS := y
# Use only if calling $(LD) directly.
LDFLAGS_DIRECT += -EL
diff --git a/config/x86_32.mk b/config/x86_32.mk
index 7f76b25..5906e60 100644
--- a/config/x86_32.mk
+++ b/config/x86_32.mk
@@ -6,6 +6,8 @@ CONFIG_HVM := y
CONFIG_MIGRATE := y
CONFIG_XCUTILS := y
+HAS_MEM_ACCESS := y
+
CFLAGS += -m32 -march=i686
# Use only if calling $(LD) directly.
diff --git a/config/x86_64.mk b/config/x86_64.mk
index 11104bd..b000c4e 100644
--- a/config/x86_64.mk
+++ b/config/x86_64.mk
@@ -7,6 +7,8 @@ CONFIG_HVM := y
CONFIG_MIGRATE := y
CONFIG_XCUTILS := y
+HAS_MEM_ACCESS := y
+
CONFIG_XEN_INSTALL_SUFFIX := .gz
CFLAGS += -m64
diff --git a/tools/tests/xen-access/Makefile b/tools/tests/xen-access/Makefile
index 65eef99..5056972 100644
--- a/tools/tests/xen-access/Makefile
+++ b/tools/tests/xen-access/Makefile
@@ -7,8 +7,13 @@ CFLAGS += $(CFLAGS_libxenctrl)
CFLAGS += $(CFLAGS_libxenguest)
CFLAGS += $(CFLAGS_xeninclude)
-TARGETS-y :=
-TARGETS-$(CONFIG_X86) += xen-access
+CFLAGS-y :=
+CFLAGS-$(CONFIG_X86) := -DCONFIG_X86
+CFLAGS-$(CONFIG_ARM) := -DCONFIG_ARM
+CFLAGS += $(CFLAGS-y)
+
+TARGETS-y :=
+TARGETS-$(HAS_MEM_ACCESS) := xen-access
TARGETS := $(TARGETS-y)
.PHONY: all
diff --git a/tools/tests/xen-access/xen-access.c b/tools/tests/xen-access/xen-access.c
index 6cb382d..9158636 100644
--- a/tools/tests/xen-access/xen-access.c
+++ b/tools/tests/xen-access/xen-access.c
@@ -41,22 +41,16 @@
#include <xenctrl.h>
#include <xen/mem_event.h>
-#define DPRINTF(a, b...) fprintf(stderr, a, ## b)
-#define ERROR(a, b...) fprintf(stderr, a "\n", ## b)
-#define PERROR(a, b...) fprintf(stderr, a ": %s\n", ## b, strerror(errno))
-
-/* Spinlock and mem event definitions */
-
-#define SPIN_LOCK_UNLOCKED 0
+#ifdef CONFIG_X86
+#define START_PFN 0ULL
#define ADDR (*(volatile long *) addr)
+
/**
* test_and_set_bit - Set a bit and return its old value
* @nr: Bit to set
* @addr: Address to count from
*
- * This operation is atomic and cannot be reordered.
- * It also implies a memory barrier.
*/
static inline int test_and_set_bit(int nr, volatile void *addr)
{
@@ -69,6 +63,43 @@ static inline int test_and_set_bit(int nr, volatile void *addr)
return oldbit;
}
+#elif CONFIG_ARM
+
+#include <xen/arch-arm.h>
+
+#define PAGE_SHIFT 12
+#define START_PFN (GUEST_RAM0_BASE >> PAGE_SHIFT)
+#define BITS_PER_WORD 32
+#define BIT_MASK(nr) (1UL << ((nr) % BITS_PER_WORD))
+#define BIT_WORD(nr) ((nr) / BITS_PER_WORD)
+
+/**
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ */
+static inline int test_and_set_bit(int nr, volatile void *addr)
+{
+ unsigned int mask = BIT_MASK(nr);
+ volatile unsigned int *p =
+ ((volatile unsigned int *)addr) + BIT_WORD(nr);
+ unsigned int old = *p;
+
+ *p = old | mask;
+ return (old & mask) != 0;
+}
+
+#endif
+
+#define DPRINTF(a, b...) fprintf(stderr, a, ## b)
+#define ERROR(a, b...) fprintf(stderr, a "\n", ## b)
+#define PERROR(a, b...) fprintf(stderr, a ": %s\n", ## b, strerror(errno))
+
+/* Spinlock and mem event definitions */
+
+#define SPIN_LOCK_UNLOCKED 0
+
typedef int spinlock_t;
static inline void spin_lock(spinlock_t *lock)
@@ -309,7 +340,7 @@ xenaccess_t *xenaccess_init(xc_interface **xch_r, domid_t domain_id)
goto err;
}
- DPRINTF("max_pages = %"PRIx64"\n", xenaccess->domain_info->max_pages);
+ DPRINTF("max_gpfn = %"PRIx64"\n", xenaccess->domain_info->max_gpfn);
return xenaccess;
@@ -492,8 +523,9 @@ int main(int argc, char *argv[])
goto exit;
}
- rc = xc_set_mem_access(xch, domain_id, default_access, 0,
- xenaccess->domain_info->max_pages);
+ rc = xc_set_mem_access(xch, domain_id, default_access, START_PFN,
+ (xenaccess->domain_info->max_gpfn - START_PFN) );
+
if ( rc < 0 )
{
ERROR("Error %d setting all memory to access type %d\n", rc,
@@ -520,8 +552,8 @@ int main(int argc, char *argv[])
/* Unregister for every event */
rc = xc_set_mem_access(xch, domain_id, XENMEM_access_rwx, ~0ull, 0);
- rc = xc_set_mem_access(xch, domain_id, XENMEM_access_rwx, 0,
- xenaccess->domain_info->max_pages);
+ rc = xc_set_mem_access(xch, domain_id, XENMEM_access_rwx, START_PFN,
+ (xenaccess->domain_info->max_gpfn - START_PFN) );
rc = xc_hvm_param_set(xch, domain_id, HVM_PARAM_MEMORY_EVENT_INT3, HVMPME_mode_disabled);
shutting_down = 1;
diff --git a/xen/arch/arm/Rules.mk b/xen/arch/arm/Rules.mk
index f6781b5..8658176 100644
--- a/xen/arch/arm/Rules.mk
+++ b/xen/arch/arm/Rules.mk
@@ -10,7 +10,6 @@ HAS_DEVICE_TREE := y
HAS_VIDEO := y
HAS_ARM_HDLCD := y
HAS_PASSTHROUGH := y
-HAS_MEM_ACCESS := y
CFLAGS += -I$(BASEDIR)/include
diff --git a/xen/arch/x86/Rules.mk b/xen/arch/x86/Rules.mk
index bd4e342..576985e 100644
--- a/xen/arch/x86/Rules.mk
+++ b/xen/arch/x86/Rules.mk
@@ -12,7 +12,6 @@ HAS_NS16550 := y
HAS_EHCI := y
HAS_KEXEC := y
HAS_GDBSX := y
-HAS_MEM_ACCESS := y
xenoprof := y
#
--
2.1.0
next prev parent reply other threads:[~2014-09-10 13:28 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-10 13:28 [PATCH v5 00/17] Mem_event and mem_access for ARM Tamas K Lengyel
2014-09-10 13:28 ` [PATCH v5 01/17] xen: Relocate mem_access and mem_event into common Tamas K Lengyel
2014-09-10 13:28 ` [PATCH v5 02/17] xen: Relocate p2m_mem_access_resume to mem_access common Tamas K Lengyel
2014-09-11 20:16 ` Julien Grall
2014-09-12 8:56 ` Tamas K Lengyel
2014-09-10 13:28 ` [PATCH v5 03/17] xen: Relocate struct npfec definition into common Tamas K Lengyel
2014-09-10 13:28 ` [PATCH v5 04/17] xen: Relocate mem_event_op domctl and access_op memop " Tamas K Lengyel
2014-09-10 13:44 ` Jan Beulich
2014-09-10 13:28 ` [PATCH v5 05/17] xen/mem_event: Clean out superfluous white-spaces Tamas K Lengyel
2014-09-10 13:28 ` [PATCH v5 06/17] xen/mem_event: Relax error condition on debug builds Tamas K Lengyel
2014-09-10 13:28 ` [PATCH v5 07/17] xen/mem_event: Abstract architecture specific sanity checks Tamas K Lengyel
2014-09-10 13:28 ` [PATCH v5 08/17] xen/mem_access: Abstract architecture specific sanity check Tamas K Lengyel
2014-09-10 13:28 ` [PATCH v5 09/17] xen/arm: p2m type definitions and changes Tamas K Lengyel
2014-09-11 20:25 ` Julien Grall
2014-09-12 8:15 ` Tamas K Lengyel
2014-09-12 19:23 ` Julien Grall
2014-09-12 20:25 ` Tamas K Lengyel
2014-09-11 20:49 ` Julien Grall
2014-09-12 8:31 ` Tamas K Lengyel
2014-09-12 19:41 ` Julien Grall
2014-09-12 20:20 ` Tamas K Lengyel
2014-09-10 13:28 ` [PATCH v5 10/17] xen/arm: Add set access required domctl Tamas K Lengyel
2014-09-11 20:26 ` Julien Grall
2014-09-10 13:28 ` [PATCH v5 11/17] xen/arm: Implement domain_get_maximum_gpfn Tamas K Lengyel
2014-09-11 20:28 ` Julien Grall
2014-09-12 8:58 ` Tamas K Lengyel
2014-09-10 13:28 ` [PATCH v5 12/17] xen/arm: Data abort exception (R/W) mem_events Tamas K Lengyel
2014-09-11 21:19 ` Julien Grall
2014-09-12 8:46 ` Tamas K Lengyel
2014-09-12 20:35 ` Julien Grall
2014-09-12 20:48 ` Tamas K Lengyel
2014-09-12 21:04 ` Julien Grall
2014-09-10 13:28 ` [PATCH v5 13/17] xen/arm: Instruction prefetch abort (X) mem_event handling Tamas K Lengyel
2014-09-11 21:23 ` Julien Grall
2014-09-12 8:34 ` Tamas K Lengyel
2014-09-10 13:28 ` [PATCH v5 14/17] xen/arm: Enable the compilation of mem_access and mem_event on ARM Tamas K Lengyel
2014-09-10 13:28 ` [PATCH v5 15/17] xen: Extend getdomaininfo to return the domain's max_gpfn Tamas K Lengyel
2014-09-10 13:48 ` Jan Beulich
2014-09-10 13:55 ` Tamas K Lengyel
2014-09-10 13:28 ` [PATCH v5 16/17] tools/libxc: Allocate magic page for mem access on ARM Tamas K Lengyel
2014-09-10 13:28 ` Tamas K Lengyel [this message]
2014-09-11 21:29 ` [PATCH v5 17/17] tools/tests: Enable xen-access " Julien Grall
2014-09-12 8:50 ` Tamas K Lengyel
2014-09-12 9:01 ` Tamas K Lengyel
2014-09-10 13:51 ` [PATCH v5 00/17] Mem_event and mem_access for ARM Jan Beulich
2014-09-10 14:01 ` Tamas K Lengyel
2014-09-15 22:26 ` Ian Campbell
2014-09-16 8:00 ` Jan Beulich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1410355726-5599-18-git-send-email-tklengyel@sec.in.tum.de \
--to=tklengyel@sec.in.tum.de \
--cc=andres@lagarcavilla.org \
--cc=dgdegra@tycho.nsa.gov \
--cc=ian.campbell@citrix.com \
--cc=ian.jackson@eu.citrix.com \
--cc=jbeulich@suse.com \
--cc=julien.grall@linaro.org \
--cc=stefano.stabellini@citrix.com \
--cc=tim@xen.org \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).