xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Tamas K Lengyel <tklengyel@sec.in.tum.de>
To: xen-devel@lists.xen.org
Cc: ian.campbell@citrix.com, tim@xen.org, julien.grall@linaro.org,
	ian.jackson@eu.citrix.com, stefano.stabellini@citrix.com,
	andres@lagarcavilla.org, jbeulich@suse.com,
	dgdegra@tycho.nsa.gov, Tamas K Lengyel <tklengyel@sec.in.tum.de>
Subject: [PATCH for-4.5 v6 17/17] tools/tests: Enable xen-access on ARM
Date: Mon, 15 Sep 2014 16:02:55 +0200	[thread overview]
Message-ID: <1410789775-24197-18-git-send-email-tklengyel@sec.in.tum.de> (raw)
In-Reply-To: <1410789775-24197-1-git-send-email-tklengyel@sec.in.tum.de>

Define the ARM specific test_and_set_bit functions and switch
to use maximum gpfn as the limit to setting permissions. Also,
move HAS_MEM_ACCESS definition into config.

Signed-off-by: Tamas K Lengyel <tklengyel@sec.in.tum.de>
---
v6: - Just use xc_domain_maximum_gpfn to get max_gpfn.
v5: - Use the new information returned by getdomaininfo, max_gpfn, to
      set access permissions. On ARM this will include the potential
      memory hole as well which the hypervisor just loops over.
v4: - Take into account multiple guest ram banks on ARM.
    - Move HAS_MEM_ACCESS definition into config/*.mk and only compile
      xen-access when it is defined.
    - Pass CONFIG_X86/CONFIG_ARM flags during compilation in xen-access
      Makefile.
---
 config/arm32.mk                     |  1 +
 config/arm64.mk                     |  1 +
 config/x86_32.mk                    |  2 +
 config/x86_64.mk                    |  2 +
 tools/tests/xen-access/Makefile     |  9 ++++-
 tools/tests/xen-access/xen-access.c | 79 ++++++++++++++++++++++++-------------
 xen/arch/arm/Rules.mk               |  1 -
 xen/arch/x86/Rules.mk               |  1 -
 8 files changed, 65 insertions(+), 31 deletions(-)

diff --git a/config/arm32.mk b/config/arm32.mk
index aa79d22..4a7c259 100644
--- a/config/arm32.mk
+++ b/config/arm32.mk
@@ -13,6 +13,7 @@ HAS_PL011 := y
 HAS_EXYNOS4210 := y
 HAS_OMAP := y
 HAS_NS16550 := y
+HAS_MEM_ACCESS := y
 
 # Use only if calling $(LD) directly.
 LDFLAGS_DIRECT += -EL
diff --git a/config/arm64.mk b/config/arm64.mk
index 15b57a4..ea6558d 100644
--- a/config/arm64.mk
+++ b/config/arm64.mk
@@ -8,6 +8,7 @@ CFLAGS += #-marm -march= -mcpu= etc
 
 HAS_PL011 := y
 HAS_NS16550 := y
+HAS_MEM_ACCESS := y
 
 # Use only if calling $(LD) directly.
 LDFLAGS_DIRECT += -EL
diff --git a/config/x86_32.mk b/config/x86_32.mk
index 7f76b25..5906e60 100644
--- a/config/x86_32.mk
+++ b/config/x86_32.mk
@@ -6,6 +6,8 @@ CONFIG_HVM := y
 CONFIG_MIGRATE := y
 CONFIG_XCUTILS := y
 
+HAS_MEM_ACCESS := y
+
 CFLAGS += -m32 -march=i686
 
 # Use only if calling $(LD) directly.
diff --git a/config/x86_64.mk b/config/x86_64.mk
index 11104bd..b000c4e 100644
--- a/config/x86_64.mk
+++ b/config/x86_64.mk
@@ -7,6 +7,8 @@ CONFIG_HVM := y
 CONFIG_MIGRATE := y
 CONFIG_XCUTILS := y
 
+HAS_MEM_ACCESS := y
+
 CONFIG_XEN_INSTALL_SUFFIX := .gz
 
 CFLAGS += -m64
diff --git a/tools/tests/xen-access/Makefile b/tools/tests/xen-access/Makefile
index 65eef99..5056972 100644
--- a/tools/tests/xen-access/Makefile
+++ b/tools/tests/xen-access/Makefile
@@ -7,8 +7,13 @@ CFLAGS += $(CFLAGS_libxenctrl)
 CFLAGS += $(CFLAGS_libxenguest)
 CFLAGS += $(CFLAGS_xeninclude)
 
-TARGETS-y := 
-TARGETS-$(CONFIG_X86) += xen-access
+CFLAGS-y :=
+CFLAGS-$(CONFIG_X86) := -DCONFIG_X86
+CFLAGS-$(CONFIG_ARM) := -DCONFIG_ARM
+CFLAGS += $(CFLAGS-y)
+
+TARGETS-y :=
+TARGETS-$(HAS_MEM_ACCESS) := xen-access
 TARGETS := $(TARGETS-y)
 
 .PHONY: all
diff --git a/tools/tests/xen-access/xen-access.c b/tools/tests/xen-access/xen-access.c
index 6cb382d..40a7143 100644
--- a/tools/tests/xen-access/xen-access.c
+++ b/tools/tests/xen-access/xen-access.c
@@ -41,22 +41,16 @@
 #include <xenctrl.h>
 #include <xen/mem_event.h>
 
-#define DPRINTF(a, b...) fprintf(stderr, a, ## b)
-#define ERROR(a, b...) fprintf(stderr, a "\n", ## b)
-#define PERROR(a, b...) fprintf(stderr, a ": %s\n", ## b, strerror(errno))
-
-/* Spinlock and mem event definitions */
-
-#define SPIN_LOCK_UNLOCKED 0
+#ifdef CONFIG_X86
 
+#define START_PFN 0ULL
 #define ADDR (*(volatile long *) addr)
+
 /**
  * test_and_set_bit - Set a bit and return its old value
  * @nr: Bit to set
  * @addr: Address to count from
  *
- * This operation is atomic and cannot be reordered.
- * It also implies a memory barrier.
  */
 static inline int test_and_set_bit(int nr, volatile void *addr)
 {
@@ -69,6 +63,43 @@ static inline int test_and_set_bit(int nr, volatile void *addr)
     return oldbit;
 }
 
+#elif CONFIG_ARM
+
+#include <xen/arch-arm.h>
+
+#define PAGE_SHIFT              12
+#define START_PFN               (GUEST_RAM0_BASE >> PAGE_SHIFT)
+#define BITS_PER_WORD           32
+#define BIT_MASK(nr)            (1UL << ((nr) % BITS_PER_WORD))
+#define BIT_WORD(nr)            ((nr) / BITS_PER_WORD)
+
+/**
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ */
+static inline int test_and_set_bit(int nr, volatile void *addr)
+{
+        unsigned int mask = BIT_MASK(nr);
+        volatile unsigned int *p =
+                ((volatile unsigned int *)addr) + BIT_WORD(nr);
+        unsigned int old = *p;
+
+        *p = old | mask;
+        return (old & mask) != 0;
+}
+
+#endif
+
+#define DPRINTF(a, b...) fprintf(stderr, a, ## b)
+#define ERROR(a, b...) fprintf(stderr, a "\n", ## b)
+#define PERROR(a, b...) fprintf(stderr, a ": %s\n", ## b, strerror(errno))
+
+/* Spinlock and mem event definitions */
+
+#define SPIN_LOCK_UNLOCKED 0
+
 typedef int spinlock_t;
 
 static inline void spin_lock(spinlock_t *lock)
@@ -108,7 +139,7 @@ typedef struct mem_event {
 typedef struct xenaccess {
     xc_interface *xc_handle;
 
-    xc_domaininfo_t    *domain_info;
+    int max_gpfn;
 
     mem_event_t mem_event;
 } xenaccess_t;
@@ -212,7 +243,6 @@ int xenaccess_teardown(xc_interface *xch, xenaccess_t *xenaccess)
     }
     xenaccess->xc_handle = NULL;
 
-    free(xenaccess->domain_info);
     free(xenaccess);
 
     return 0;
@@ -293,23 +323,17 @@ xenaccess_t *xenaccess_init(xc_interface **xch_r, domid_t domain_id)
                    (mem_event_sring_t *)xenaccess->mem_event.ring_page,
                    XC_PAGE_SIZE);
 
-    /* Get domaininfo */
-    xenaccess->domain_info = malloc(sizeof(xc_domaininfo_t));
-    if ( xenaccess->domain_info == NULL )
-    {
-        ERROR("Error allocating memory for domain info");
-        goto err;
-    }
+    /* Get max_gpfn */
+    xenaccess->max_gpfn = xc_domain_maximum_gpfn(xenaccess->xc_handle,
+                                                 xenaccess->mem_event.domain_id);
 
-    rc = xc_domain_getinfolist(xenaccess->xc_handle, domain_id, 1,
-                               xenaccess->domain_info);
-    if ( rc != 1 )
+    if ( xenaccess->max_gpfn < 0 )
     {
-        ERROR("Error getting domain info");
+        ERROR("Failed to get max gpfn");
         goto err;
     }
 
-    DPRINTF("max_pages = %"PRIx64"\n", xenaccess->domain_info->max_pages);
+    DPRINTF("max_gpfn = %"PRIx32"\n", xenaccess->max_gpfn);
 
     return xenaccess;
 
@@ -492,8 +516,9 @@ int main(int argc, char *argv[])
         goto exit;
     }
 
-    rc = xc_set_mem_access(xch, domain_id, default_access, 0,
-                           xenaccess->domain_info->max_pages);
+    rc = xc_set_mem_access(xch, domain_id, default_access, START_PFN,
+                           (xenaccess->max_gpfn - START_PFN) );
+
     if ( rc < 0 )
     {
         ERROR("Error %d setting all memory to access type %d\n", rc,
@@ -520,8 +545,8 @@ int main(int argc, char *argv[])
 
             /* Unregister for every event */
             rc = xc_set_mem_access(xch, domain_id, XENMEM_access_rwx, ~0ull, 0);
-            rc = xc_set_mem_access(xch, domain_id, XENMEM_access_rwx, 0,
-                                   xenaccess->domain_info->max_pages);
+            rc = xc_set_mem_access(xch, domain_id, XENMEM_access_rwx, START_PFN,
+                                   (xenaccess->max_gpfn - START_PFN) );
             rc = xc_hvm_param_set(xch, domain_id, HVM_PARAM_MEMORY_EVENT_INT3, HVMPME_mode_disabled);
 
             shutting_down = 1;
diff --git a/xen/arch/arm/Rules.mk b/xen/arch/arm/Rules.mk
index f6781b5..8658176 100644
--- a/xen/arch/arm/Rules.mk
+++ b/xen/arch/arm/Rules.mk
@@ -10,7 +10,6 @@ HAS_DEVICE_TREE := y
 HAS_VIDEO := y
 HAS_ARM_HDLCD := y
 HAS_PASSTHROUGH := y
-HAS_MEM_ACCESS := y
 
 CFLAGS += -I$(BASEDIR)/include
 
diff --git a/xen/arch/x86/Rules.mk b/xen/arch/x86/Rules.mk
index bd4e342..576985e 100644
--- a/xen/arch/x86/Rules.mk
+++ b/xen/arch/x86/Rules.mk
@@ -12,7 +12,6 @@ HAS_NS16550 := y
 HAS_EHCI := y
 HAS_KEXEC := y
 HAS_GDBSX := y
-HAS_MEM_ACCESS := y
 xenoprof := y
 
 #
-- 
2.1.0

  parent reply	other threads:[~2014-09-15 14:02 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-15 14:02 [PATCH for-4.5 v6 00/17] Mem_event and mem_access for ARM Tamas K Lengyel
2014-09-15 14:02 ` [PATCH for-4.5 v6 01/17] xen: Relocate mem_access and mem_event into common Tamas K Lengyel
2014-09-15 14:02 ` [PATCH for-4.5 v6 02/17] xen: Relocate p2m_mem_access_resume to mem_access common Tamas K Lengyel
2014-09-15 14:02 ` [PATCH for-4.5 v6 03/17] xen: Relocate struct npfec definition into common Tamas K Lengyel
2014-09-15 14:02 ` [PATCH for-4.5 v6 04/17] xen: Relocate mem_event_op domctl and access_op memop " Tamas K Lengyel
2014-09-15 14:02 ` [PATCH for-4.5 v6 05/17] x86/p2m: Typo fix for spelling ambiguous Tamas K Lengyel
2014-09-15 14:02 ` [PATCH for-4.5 v6 06/17] xen/mem_event: Clean out superfluous white-spaces Tamas K Lengyel
2014-09-15 14:02 ` [PATCH for-4.5 v6 07/17] xen/mem_event: Relax error condition on debug builds Tamas K Lengyel
2014-09-15 14:02 ` [PATCH for-4.5 v6 08/17] xen/mem_event: Abstract architecture specific sanity checks Tamas K Lengyel
2014-09-15 14:02 ` [PATCH for-4.5 v6 09/17] xen/mem_access: Abstract architecture specific sanity check Tamas K Lengyel
2014-09-15 14:02 ` [PATCH for-4.5 v6 10/17] xen/arm: p2m type definitions and changes Tamas K Lengyel
2014-09-15 22:35   ` Ian Campbell
2014-09-16  8:49     ` Tamas K Lengyel
2014-09-16 13:27       ` Ian Campbell
2014-09-16 20:38         ` Julien Grall
2014-09-16 21:52           ` Tamas K Lengyel
2014-09-15 14:02 ` [PATCH for-4.5 v6 11/17] xen/arm: Add set access required domctl Tamas K Lengyel
2014-09-15 22:37   ` Ian Campbell
2014-09-16  8:37     ` Tamas K Lengyel
2014-09-15 22:38   ` Ian Campbell
2014-09-16  8:33     ` Tamas K Lengyel
2014-09-16 13:25       ` Ian Campbell
2014-09-15 14:02 ` [PATCH for-4.5 v6 12/17] xen/arm: Implement domain_get_maximum_gpfn Tamas K Lengyel
2014-09-15 22:39   ` Ian Campbell
2014-09-16  8:02     ` Tamas K Lengyel
2014-09-16 16:44       ` Ian Campbell
2014-09-16 17:09         ` Tamas K Lengyel
2014-09-15 14:02 ` [PATCH for-4.5 v6 13/17] xen/arm: Data abort exception (R/W) mem_events Tamas K Lengyel
2014-09-15 22:53   ` Ian Campbell
     [not found]     ` <CAErYnshu0vJJMxWwu4eo2MZf=q_g2H123p6VUk_4a9f12vYLjg@mail.gmail.com>
2014-09-16 10:07       ` Tamas K Lengyel
2014-09-16 16:50         ` Ian Campbell
2014-09-16 17:08           ` Tamas K Lengyel
2014-09-18 18:54   ` Ian Campbell
2014-09-18 20:09     ` Tamas K Lengyel
2014-09-19  9:05       ` Tamas K Lengyel
2014-09-22  9:11         ` Ian Campbell
2014-09-22 17:18           ` Tamas K Lengyel
2014-09-15 14:02 ` [PATCH for-4.5 v6 14/17] xen/arm: Instruction prefetch abort (X) mem_event handling Tamas K Lengyel
2014-09-18 18:59   ` Ian Campbell
2014-09-18 20:12     ` Tamas K Lengyel
2014-09-15 14:02 ` [PATCH for-4.5 v6 15/17] xen/arm: Enable the compilation of mem_access and mem_event on ARM Tamas K Lengyel
2014-09-15 14:02 ` [PATCH for-4.5 v6 16/17] tools/libxc: Allocate magic page for mem access " Tamas K Lengyel
2014-09-15 14:02 ` Tamas K Lengyel [this message]
2014-09-18 19:02   ` [PATCH for-4.5 v6 17/17] tools/tests: Enable xen-access " Ian Campbell
2014-09-22 18:48     ` Tamas K Lengyel
2014-09-23 12:18       ` Ian Campbell
2014-10-01 17:32         ` Aravindh Puthiyaparambil (aravindp)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1410789775-24197-18-git-send-email-tklengyel@sec.in.tum.de \
    --to=tklengyel@sec.in.tum.de \
    --cc=andres@lagarcavilla.org \
    --cc=dgdegra@tycho.nsa.gov \
    --cc=ian.campbell@citrix.com \
    --cc=ian.jackson@eu.citrix.com \
    --cc=jbeulich@suse.com \
    --cc=julien.grall@linaro.org \
    --cc=stefano.stabellini@citrix.com \
    --cc=tim@xen.org \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).