From: Tamas K Lengyel <tklengyel@sec.in.tum.de>
To: xen-devel@lists.xen.org
Cc: ian.campbell@citrix.com, tim@xen.org, julien.grall@linaro.org,
ian.jackson@eu.citrix.com, stefano.stabellini@citrix.com,
andres@lagarcavilla.org, jbeulich@suse.com,
dgdegra@tycho.nsa.gov, Tamas K Lengyel <tklengyel@sec.in.tum.de>
Subject: [PATCH for-4.5 v7 21/21] tools/tests: Enable xen-access on ARM
Date: Wed, 17 Sep 2014 22:51:24 +0200 [thread overview]
Message-ID: <1410987084-11899-22-git-send-email-tklengyel@sec.in.tum.de> (raw)
In-Reply-To: <1410987084-11899-1-git-send-email-tklengyel@sec.in.tum.de>
Define the ARM specific test_and_set_bit functions and switch
to use maximum gpfn as the limit to setting permissions. Also,
move HAS_MEM_ACCESS definition into config.
Signed-off-by: Tamas K Lengyel <tklengyel@sec.in.tum.de>
---
v6: - Just use xc_domain_maximum_gpfn to get max_gpfn.
v5: - Use the new information returned by getdomaininfo, max_gpfn, to
set access permissions. On ARM this will include the potential
memory hole as well which the hypervisor just loops over.
v4: - Take into account multiple guest ram banks on ARM.
- Move HAS_MEM_ACCESS definition into config/*.mk and only compile
xen-access when it is defined.
- Pass CONFIG_X86/CONFIG_ARM flags during compilation in xen-access
Makefile.
---
config/arm32.mk | 1 +
config/arm64.mk | 1 +
config/x86_32.mk | 2 +
config/x86_64.mk | 2 +
tools/tests/xen-access/Makefile | 9 ++++-
tools/tests/xen-access/xen-access.c | 79 ++++++++++++++++++++++++-------------
xen/arch/arm/Rules.mk | 1 -
xen/arch/x86/Rules.mk | 1 -
8 files changed, 65 insertions(+), 31 deletions(-)
diff --git a/config/arm32.mk b/config/arm32.mk
index aa79d22..4a7c259 100644
--- a/config/arm32.mk
+++ b/config/arm32.mk
@@ -13,6 +13,7 @@ HAS_PL011 := y
HAS_EXYNOS4210 := y
HAS_OMAP := y
HAS_NS16550 := y
+HAS_MEM_ACCESS := y
# Use only if calling $(LD) directly.
LDFLAGS_DIRECT += -EL
diff --git a/config/arm64.mk b/config/arm64.mk
index 15b57a4..ea6558d 100644
--- a/config/arm64.mk
+++ b/config/arm64.mk
@@ -8,6 +8,7 @@ CFLAGS += #-marm -march= -mcpu= etc
HAS_PL011 := y
HAS_NS16550 := y
+HAS_MEM_ACCESS := y
# Use only if calling $(LD) directly.
LDFLAGS_DIRECT += -EL
diff --git a/config/x86_32.mk b/config/x86_32.mk
index 7f76b25..5906e60 100644
--- a/config/x86_32.mk
+++ b/config/x86_32.mk
@@ -6,6 +6,8 @@ CONFIG_HVM := y
CONFIG_MIGRATE := y
CONFIG_XCUTILS := y
+HAS_MEM_ACCESS := y
+
CFLAGS += -m32 -march=i686
# Use only if calling $(LD) directly.
diff --git a/config/x86_64.mk b/config/x86_64.mk
index 11104bd..b000c4e 100644
--- a/config/x86_64.mk
+++ b/config/x86_64.mk
@@ -7,6 +7,8 @@ CONFIG_HVM := y
CONFIG_MIGRATE := y
CONFIG_XCUTILS := y
+HAS_MEM_ACCESS := y
+
CONFIG_XEN_INSTALL_SUFFIX := .gz
CFLAGS += -m64
diff --git a/tools/tests/xen-access/Makefile b/tools/tests/xen-access/Makefile
index 65eef99..5056972 100644
--- a/tools/tests/xen-access/Makefile
+++ b/tools/tests/xen-access/Makefile
@@ -7,8 +7,13 @@ CFLAGS += $(CFLAGS_libxenctrl)
CFLAGS += $(CFLAGS_libxenguest)
CFLAGS += $(CFLAGS_xeninclude)
-TARGETS-y :=
-TARGETS-$(CONFIG_X86) += xen-access
+CFLAGS-y :=
+CFLAGS-$(CONFIG_X86) := -DCONFIG_X86
+CFLAGS-$(CONFIG_ARM) := -DCONFIG_ARM
+CFLAGS += $(CFLAGS-y)
+
+TARGETS-y :=
+TARGETS-$(HAS_MEM_ACCESS) := xen-access
TARGETS := $(TARGETS-y)
.PHONY: all
diff --git a/tools/tests/xen-access/xen-access.c b/tools/tests/xen-access/xen-access.c
index 6cb382d..40a7143 100644
--- a/tools/tests/xen-access/xen-access.c
+++ b/tools/tests/xen-access/xen-access.c
@@ -41,22 +41,16 @@
#include <xenctrl.h>
#include <xen/mem_event.h>
-#define DPRINTF(a, b...) fprintf(stderr, a, ## b)
-#define ERROR(a, b...) fprintf(stderr, a "\n", ## b)
-#define PERROR(a, b...) fprintf(stderr, a ": %s\n", ## b, strerror(errno))
-
-/* Spinlock and mem event definitions */
-
-#define SPIN_LOCK_UNLOCKED 0
+#ifdef CONFIG_X86
+#define START_PFN 0ULL
#define ADDR (*(volatile long *) addr)
+
/**
* test_and_set_bit - Set a bit and return its old value
* @nr: Bit to set
* @addr: Address to count from
*
- * This operation is atomic and cannot be reordered.
- * It also implies a memory barrier.
*/
static inline int test_and_set_bit(int nr, volatile void *addr)
{
@@ -69,6 +63,43 @@ static inline int test_and_set_bit(int nr, volatile void *addr)
return oldbit;
}
+#elif CONFIG_ARM
+
+#include <xen/arch-arm.h>
+
+#define PAGE_SHIFT 12
+#define START_PFN (GUEST_RAM0_BASE >> PAGE_SHIFT)
+#define BITS_PER_WORD 32
+#define BIT_MASK(nr) (1UL << ((nr) % BITS_PER_WORD))
+#define BIT_WORD(nr) ((nr) / BITS_PER_WORD)
+
+/**
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ */
+static inline int test_and_set_bit(int nr, volatile void *addr)
+{
+ unsigned int mask = BIT_MASK(nr);
+ volatile unsigned int *p =
+ ((volatile unsigned int *)addr) + BIT_WORD(nr);
+ unsigned int old = *p;
+
+ *p = old | mask;
+ return (old & mask) != 0;
+}
+
+#endif
+
+#define DPRINTF(a, b...) fprintf(stderr, a, ## b)
+#define ERROR(a, b...) fprintf(stderr, a "\n", ## b)
+#define PERROR(a, b...) fprintf(stderr, a ": %s\n", ## b, strerror(errno))
+
+/* Spinlock and mem event definitions */
+
+#define SPIN_LOCK_UNLOCKED 0
+
typedef int spinlock_t;
static inline void spin_lock(spinlock_t *lock)
@@ -108,7 +139,7 @@ typedef struct mem_event {
typedef struct xenaccess {
xc_interface *xc_handle;
- xc_domaininfo_t *domain_info;
+ int max_gpfn;
mem_event_t mem_event;
} xenaccess_t;
@@ -212,7 +243,6 @@ int xenaccess_teardown(xc_interface *xch, xenaccess_t *xenaccess)
}
xenaccess->xc_handle = NULL;
- free(xenaccess->domain_info);
free(xenaccess);
return 0;
@@ -293,23 +323,17 @@ xenaccess_t *xenaccess_init(xc_interface **xch_r, domid_t domain_id)
(mem_event_sring_t *)xenaccess->mem_event.ring_page,
XC_PAGE_SIZE);
- /* Get domaininfo */
- xenaccess->domain_info = malloc(sizeof(xc_domaininfo_t));
- if ( xenaccess->domain_info == NULL )
- {
- ERROR("Error allocating memory for domain info");
- goto err;
- }
+ /* Get max_gpfn */
+ xenaccess->max_gpfn = xc_domain_maximum_gpfn(xenaccess->xc_handle,
+ xenaccess->mem_event.domain_id);
- rc = xc_domain_getinfolist(xenaccess->xc_handle, domain_id, 1,
- xenaccess->domain_info);
- if ( rc != 1 )
+ if ( xenaccess->max_gpfn < 0 )
{
- ERROR("Error getting domain info");
+ ERROR("Failed to get max gpfn");
goto err;
}
- DPRINTF("max_pages = %"PRIx64"\n", xenaccess->domain_info->max_pages);
+ DPRINTF("max_gpfn = %"PRIx32"\n", xenaccess->max_gpfn);
return xenaccess;
@@ -492,8 +516,9 @@ int main(int argc, char *argv[])
goto exit;
}
- rc = xc_set_mem_access(xch, domain_id, default_access, 0,
- xenaccess->domain_info->max_pages);
+ rc = xc_set_mem_access(xch, domain_id, default_access, START_PFN,
+ (xenaccess->max_gpfn - START_PFN) );
+
if ( rc < 0 )
{
ERROR("Error %d setting all memory to access type %d\n", rc,
@@ -520,8 +545,8 @@ int main(int argc, char *argv[])
/* Unregister for every event */
rc = xc_set_mem_access(xch, domain_id, XENMEM_access_rwx, ~0ull, 0);
- rc = xc_set_mem_access(xch, domain_id, XENMEM_access_rwx, 0,
- xenaccess->domain_info->max_pages);
+ rc = xc_set_mem_access(xch, domain_id, XENMEM_access_rwx, START_PFN,
+ (xenaccess->max_gpfn - START_PFN) );
rc = xc_hvm_param_set(xch, domain_id, HVM_PARAM_MEMORY_EVENT_INT3, HVMPME_mode_disabled);
shutting_down = 1;
diff --git a/xen/arch/arm/Rules.mk b/xen/arch/arm/Rules.mk
index f6781b5..8658176 100644
--- a/xen/arch/arm/Rules.mk
+++ b/xen/arch/arm/Rules.mk
@@ -10,7 +10,6 @@ HAS_DEVICE_TREE := y
HAS_VIDEO := y
HAS_ARM_HDLCD := y
HAS_PASSTHROUGH := y
-HAS_MEM_ACCESS := y
CFLAGS += -I$(BASEDIR)/include
diff --git a/xen/arch/x86/Rules.mk b/xen/arch/x86/Rules.mk
index bd4e342..576985e 100644
--- a/xen/arch/x86/Rules.mk
+++ b/xen/arch/x86/Rules.mk
@@ -12,7 +12,6 @@ HAS_NS16550 := y
HAS_EHCI := y
HAS_KEXEC := y
HAS_GDBSX := y
-HAS_MEM_ACCESS := y
xenoprof := y
#
--
2.1.0
next prev parent reply other threads:[~2014-09-17 20:51 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-17 20:51 [PATCH for-4.5 v7 00/21] Mem_event and mem_access for ARM Tamas K Lengyel
2014-09-17 20:51 ` [PATCH for-4.5 v7 01/21] xen: Relocate mem_access and mem_event into common Tamas K Lengyel
2014-09-17 20:51 ` [PATCH for-4.5 v7 02/21] xen: Relocate struct npfec definition " Tamas K Lengyel
2014-09-17 20:51 ` [PATCH for-4.5 v7 03/21] xen: Relocate mem_event_op domctl and access_op memop " Tamas K Lengyel
2014-09-17 20:51 ` [PATCH for-4.5 v7 04/21] xen: Relocate set_access_required domctl " Tamas K Lengyel
2014-09-18 9:18 ` Jan Beulich
2014-09-18 10:36 ` Tamas K Lengyel
2014-09-18 10:37 ` Tamas K Lengyel
2014-09-18 11:17 ` Tim Deegan
2014-09-18 11:21 ` Tamas K Lengyel
2014-09-18 12:34 ` Jan Beulich
2014-09-18 13:02 ` Tamas K Lengyel
2014-09-17 20:51 ` [PATCH for-4.5 v7 05/21] xen: Relocate p2m_access_t into common and swap the order Tamas K Lengyel
2014-09-18 9:22 ` Jan Beulich
2014-09-18 10:52 ` Tamas K Lengyel
2014-09-17 20:51 ` [PATCH for-4.5 v7 06/21] xen: Relocate p2m_mem_access_resume to mem_access common Tamas K Lengyel
2014-09-17 20:51 ` [PATCH for-4.5 v7 07/21] xen: Relocate p2m_mem_access_check into common and refactor it Tamas K Lengyel
2014-09-18 9:28 ` Jan Beulich
2014-09-18 10:39 ` Tim Deegan
2014-09-18 10:47 ` Tamas K Lengyel
2014-09-18 11:13 ` Tim Deegan
2014-09-22 12:08 ` Ian Campbell
2014-09-17 20:51 ` [PATCH for-4.5 v7 08/21] x86/p2m: Typo fix for spelling ambiguous Tamas K Lengyel
2014-09-17 20:51 ` [PATCH for-4.5 v7 09/21] x86/p2m: Fix conversion macro of p2m_access to XENMEM_access Tamas K Lengyel
2014-09-18 9:35 ` Jan Beulich
2014-09-18 9:41 ` Tamas K Lengyel
2014-09-17 20:51 ` [PATCH for-4.5 v7 10/21] xen/mem_event: Clean out superfluous white-spaces Tamas K Lengyel
2014-09-17 20:51 ` [PATCH for-4.5 v7 11/21] xen/mem_event: Relax error condition on debug builds Tamas K Lengyel
2014-09-17 20:51 ` [PATCH for-4.5 v7 12/21] xen/mem_event: Abstract architecture specific sanity checks Tamas K Lengyel
2014-09-17 20:51 ` [PATCH for-4.5 v7 13/21] xen/mem_access: Abstract architecture specific sanity check Tamas K Lengyel
2014-09-17 20:51 ` [PATCH for-4.5 v7 14/21] xen/arm: p2m changes for mem_access support Tamas K Lengyel
2014-09-22 12:20 ` Ian Campbell
2014-09-22 17:16 ` Tamas K Lengyel
2014-09-17 20:51 ` [PATCH for-4.5 v7 15/21] xen/arm: Implement domain_get_maximum_gpfn Tamas K Lengyel
2014-09-17 20:51 ` [PATCH for-4.5 v7 16/21] xen/arm: Add p2m_set_permission and p2m_shatter_page helpers Tamas K Lengyel
2014-09-22 12:24 ` Ian Campbell
2014-09-22 18:24 ` Tamas K Lengyel
2014-09-17 20:51 ` [PATCH for-4.5 v7 17/21] xen/arm: Data abort exception (R/W) mem_events Tamas K Lengyel
2014-09-17 20:51 ` [PATCH for-4.5 v7 18/21] xen/arm: Instruction prefetch abort (X) mem_event handling Tamas K Lengyel
2014-09-17 20:51 ` [PATCH for-4.5 v7 19/21] xen/arm: Enable the compilation of mem_access and mem_event on ARM Tamas K Lengyel
2014-09-17 20:51 ` [PATCH for-4.5 v7 20/21] tools/libxc: Allocate magic page for mem access " Tamas K Lengyel
2014-09-17 20:51 ` Tamas K Lengyel [this message]
2014-09-22 12:29 ` [PATCH for-4.5 v7 21/21] tools/tests: Enable xen-access " Ian Campbell
2014-09-22 17:11 ` Tamas K Lengyel
2014-09-23 8:37 ` Ian Campbell
2014-09-18 9:21 ` [PATCH for-4.5 v7 00/21] Mem_event and mem_access for ARM Tim Deegan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1410987084-11899-22-git-send-email-tklengyel@sec.in.tum.de \
--to=tklengyel@sec.in.tum.de \
--cc=andres@lagarcavilla.org \
--cc=dgdegra@tycho.nsa.gov \
--cc=ian.campbell@citrix.com \
--cc=ian.jackson@eu.citrix.com \
--cc=jbeulich@suse.com \
--cc=julien.grall@linaro.org \
--cc=stefano.stabellini@citrix.com \
--cc=tim@xen.org \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).