From: Ian Campbell <ian.campbell@citrix.com>
To: xen-devel@lists.xen.org
Cc: julien.grall@linaro.org, tim@xen.org,
Ian Campbell <ian.campbell@citrix.com>,
vijay.kilari@gmail.com, stefano.stabellini@eu.citrix.com
Subject: [PATCH v3 for-4.5 6/9] xen: arm: handle variable p2m levels in p2m_lookup
Date: Thu, 18 Sep 2014 01:09:52 +0100 [thread overview]
Message-ID: <1410998995-27449-6-git-send-email-ian.campbell@citrix.com> (raw)
In-Reply-To: <1410998960.1920.2.camel@citrix.com>
This paves the way for boot-time selection of the number of levels to
use in the p2m, which is required to support both 40-bit and 48-bit
systems. For now the starting level remains a compile time constant.
Implemented by turning the linear sequence of lookups into a loop.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Julien Grall <julien.grall@linaro.org>
---
v2:
- pt level vars are unsigned int
- spell concatenate properly
- ASSERT() rather than BUG_ON()
---
xen/arch/arm/p2m.c | 73 +++++++++++++++++++++++++++++++++-------------------
1 file changed, 47 insertions(+), 26 deletions(-)
diff --git a/xen/arch/arm/p2m.c b/xen/arch/arm/p2m.c
index e953ca3..eac3ce4 100644
--- a/xen/arch/arm/p2m.c
+++ b/xen/arch/arm/p2m.c
@@ -153,56 +153,77 @@ static lpae_t *p2m_map_first(struct p2m_domain *p2m, paddr_t addr)
paddr_t p2m_lookup(struct domain *d, paddr_t paddr, p2m_type_t *t)
{
struct p2m_domain *p2m = &d->arch.p2m;
- lpae_t pte, *first = NULL, *second = NULL, *third = NULL;
+ const unsigned int offsets[4] = {
+ zeroeth_table_offset(paddr),
+ first_table_offset(paddr),
+ second_table_offset(paddr),
+ third_table_offset(paddr)
+ };
+ const paddr_t masks[4] = {
+ ZEROETH_MASK, FIRST_MASK, SECOND_MASK, THIRD_MASK
+ };
+ lpae_t pte, *map;
paddr_t maddr = INVALID_PADDR;
- paddr_t mask;
+ paddr_t mask = 0;
p2m_type_t _t;
+ unsigned int level, root_table;
+
+ BUILD_BUG_ON(THIRD_MASK != PAGE_MASK);
/* Allow t to be NULL */
t = t ?: &_t;
*t = p2m_invalid;
+ if ( P2M_ROOT_PAGES > 1 )
+ {
+ /*
+ * Concatenated root-level tables. The table number will be
+ * the offset at the previous level. It is not possible to
+ * concatenate a level-0 root.
+ */
+ ASSERT(P2M_ROOT_LEVEL > 0);
+ root_table = offsets[P2M_ROOT_LEVEL - 1];
+ if ( root_table >= P2M_ROOT_PAGES )
+ goto err;
+ }
+ else
+ root_table = 0;
+
spin_lock(&p2m->lock);
- first = p2m_map_first(p2m, paddr);
- if ( !first )
- goto err;
+ map = __map_domain_page(p2m->root + root_table);
- mask = FIRST_MASK;
- pte = first[first_table_offset(paddr)];
- if ( !p2m_table(pte) )
- goto done;
+ for ( level = P2M_ROOT_LEVEL ; level < 4 ; level++ )
+ {
+ mask = masks[level];
- mask = SECOND_MASK;
- second = map_domain_page(pte.p2m.base);
- pte = second[second_table_offset(paddr)];
- if ( !p2m_table(pte) )
- goto done;
+ pte = map[offsets[level]];
- mask = THIRD_MASK;
+ if ( level == 3 && !p2m_table(pte) )
+ /* Invalid, clobber the pte */
+ pte.bits = 0;
+ if ( level == 3 || !p2m_table(pte) )
+ /* Done */
+ break;
- BUILD_BUG_ON(THIRD_MASK != PAGE_MASK);
+ ASSERT(level < 3);
- third = map_domain_page(pte.p2m.base);
- pte = third[third_table_offset(paddr)];
+ /* Map for next level */
+ unmap_domain_page(map);
+ map = map_domain_page(pte.p2m.base);
+ }
- /* This bit must be one in the level 3 entry */
- if ( !p2m_table(pte) )
- pte.bits = 0;
+ unmap_domain_page(map);
-done:
if ( p2m_valid(pte) )
{
+ ASSERT(mask);
ASSERT(pte.p2m.type != p2m_invalid);
maddr = (pte.bits & PADDR_MASK & mask) | (paddr & ~mask);
*t = pte.p2m.type;
}
- if (third) unmap_domain_page(third);
- if (second) unmap_domain_page(second);
- if (first) unmap_domain_page(first);
-
err:
spin_unlock(&p2m->lock);
--
1.7.10.4
next prev parent reply other threads:[~2014-09-18 0:09 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-18 0:09 [PATCH v3 for-4.5 0/9] xen: arm: support for > 40-bit physical addressing Ian Campbell
2014-09-18 0:09 ` [PATCH v3 for-4.5 1/9] xen: arm: rename p2m->first_level to p2m->root Ian Campbell
2014-09-18 0:09 ` [PATCH v3 for-4.5 2/9] xen: arm: Implement variable levels in dump_pt_walk Ian Campbell
2014-09-22 14:33 ` Julien Grall
2014-09-18 0:09 ` [PATCH v3 for-4.5 3/9] xen: arm: handle concatenated root tables " Ian Campbell
2014-09-18 0:09 ` [PATCH v3 for-4.5 4/9] xen: arm: move setup_virt_paging to p2m.[ch] from mm.[ch] Ian Campbell
2014-09-18 0:09 ` [PATCH v3 for-4.5 5/9] xen: arm: Defer setting of VTCR_EL2 until after CPUs are up Ian Campbell
2014-09-18 0:09 ` Ian Campbell [this message]
2014-09-18 0:09 ` [PATCH v3 for-4.5 7/9] xen: arm: handle variable p2m levels in apply_p2m_changes Ian Campbell
2014-09-18 0:09 ` [PATCH v3 for-4.5 8/9] xen: arm: support for up to 48-bit physical addressing on arm64 Ian Campbell
2014-09-18 0:09 ` [PATCH v3 for-4.5 9/9] xen: arm: support for up to 48-bit IPA " Ian Campbell
2014-09-19 14:46 ` [PATCH v3 for-4.5 0/9] xen: arm: support for > 40-bit physical addressing Vijay Kilari
2014-09-22 8:51 ` Ian Campbell
2014-09-22 13:25 ` Vijay Kilari
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1410998995-27449-6-git-send-email-ian.campbell@citrix.com \
--to=ian.campbell@citrix.com \
--cc=julien.grall@linaro.org \
--cc=stefano.stabellini@eu.citrix.com \
--cc=tim@xen.org \
--cc=vijay.kilari@gmail.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).