xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Roy Franz <roy.franz@linaro.org>
To: xen-devel@lists.xen.org, ian.campbell@citrix.com,
	stefano.stabellini@citrix.com, tim@xen.org, jbeulich@suse.com,
	keir@xen.org
Cc: Roy Franz <roy.franz@linaro.org>, fu.wei@linaro.org
Subject: [PATCH V5 10/15] Add arch specific module handling to read_file()
Date: Thu, 18 Sep 2014 15:50:01 -0700	[thread overview]
Message-ID: <1411080607-32365-11-git-send-email-roy.franz@linaro.org> (raw)
In-Reply-To: <1411080607-32365-1-git-send-email-roy.franz@linaro.org>

Each architecture tracks modules differently internally,
so add efi_arch_handle_module() routine to enable the common
code to invoke the proper handling of modules as the are loaded.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
---
 xen/common/efi/boot.c          | 102 ++++++++++++++++++++++++-----------------
 xen/include/asm-x86/efi-boot.h |  32 ++++++++++++-
 2 files changed, 91 insertions(+), 43 deletions(-)

diff --git a/xen/common/efi/boot.c b/xen/common/efi/boot.c
index 38177bf..4acab40 100644
--- a/xen/common/efi/boot.c
+++ b/xen/common/efi/boot.c
@@ -56,12 +56,13 @@ static void noreturn blexit(const CHAR16 *str);
 static void PrintErrMesg(const CHAR16 *mesg, EFI_STATUS ErrCode);
 static char *get_value(const struct file *cfg, const char *section,
                               const char *item);
-static void  split_value(char *s);
+static char *split_string(char *s);
 static CHAR16 *s2w(union string *str);
 static char *w2s(const union string *str);
-static bool_t  read_file(EFI_FILE_HANDLE dir_handle, CHAR16 *name,
-                               struct file *file);
+static size_t wstrlen(const CHAR16 * s);
 static int set_color(u32 mask, int bpp, u8 *pos, u8 *sz);
+static bool_t read_file(EFI_FILE_HANDLE dir_handle, struct file *file,
+                               CHAR16 *filename, char *options);
 
 static EFI_BOOT_SERVICES *__initdata efi_bs;
 static EFI_HANDLE __initdata efi_ih;
@@ -115,6 +116,15 @@ static void __init DisplayUint(UINT64 Val, INTN Width)
     PrintStr(PrintString);
 }
 
+static size_t __init wstrlen(const CHAR16 * s)
+{
+	const CHAR16 *sc;
+
+	for (sc = s; *sc != L'\0'; ++sc)
+		/* nothing */;
+	return sc - s;
+}
+
 static CHAR16 *__init wstrcpy(CHAR16 *d, const CHAR16 *s)
 {
     CHAR16 *r = d;
@@ -404,18 +414,33 @@ static CHAR16 *__init point_tail(CHAR16 *fn)
             break;
         }
 }
+/*
+ * Truncate string at first space, and return pointer
+ * to remainder of string.
+ */
+static char * __init split_string(char *s)
+{
+    while ( *s && !isspace(*s) )
+        ++s;
+    if ( *s )
+    {
+        *s = 0;
+        return(s + 1);
+    }
+    return NULL;
+}
 
-static bool_t __init read_file(EFI_FILE_HANDLE dir_handle, CHAR16 *name,
-                               struct file *file)
+static bool_t __init read_file(EFI_FILE_HANDLE dir_handle, struct file *file,
+                               CHAR16 *filename, char *options)
 {
     EFI_FILE_HANDLE FileHandle = NULL;
     UINT64 size;
     EFI_STATUS ret;
     CHAR16 *what = NULL;
 
-    if ( !name )
+    if ( !filename )
         PrintErrMesg(L"No filename", EFI_OUT_OF_RESOURCES);
-    ret = dir_handle->Open(dir_handle, &FileHandle, name,
+    ret = dir_handle->Open(dir_handle, &FileHandle, filename,
                            EFI_FILE_MODE_READ, 0);
     if ( file == &cfg && ret == EFI_NOT_FOUND )
         return 0;
@@ -447,20 +472,18 @@ static bool_t __init read_file(EFI_FILE_HANDLE dir_handle, CHAR16 *name,
     }
     else
     {
+        file->size = size;
         if ( file != &cfg )
         {
-            PrintStr(name);
+            PrintStr(filename);
             PrintStr(L": ");
             DisplayUint(file->addr, 2 * sizeof(file->addr));
             PrintStr(L"-");
             DisplayUint(file->addr + size, 2 * sizeof(file->addr));
             PrintStr(newline);
-            mb_modules[mbi.mods_count].mod_start = file->addr >> PAGE_SHIFT;
-            mb_modules[mbi.mods_count].mod_end = size;
-            ++mbi.mods_count;
+            efi_arch_handle_module(file, filename, options);
         }
 
-        file->size = size;
         ret = FileHandle->Read(FileHandle, &file->size, file->ptr);
         if ( !EFI_ERROR(ret) && file->size != size )
             ret = EFI_ABORTED;
@@ -475,7 +498,7 @@ static bool_t __init read_file(EFI_FILE_HANDLE dir_handle, CHAR16 *name,
     {
         PrintErr(what);
         PrintErr(L" failed for ");
-        PrintErrMesg(name, ret);
+        PrintErrMesg(filename, ret);
     }
 
     return 1;
@@ -531,7 +554,13 @@ static char *__init get_value(const struct file *cfg, const char *section,
             break;
         default:
             if ( match && strncmp(ptr, item, ilen) == 0 && ptr[ilen] == '=' )
-                return ptr + ilen + 1;
+            {
+                ptr += ilen + 1;
+                /* strip off any leading spaces */
+                while ( *ptr && isspace(*ptr) )
+                    ptr++;
+                return ptr;
+            }
             break;
         }
         ptr += strlen(ptr);
@@ -539,16 +568,6 @@ static char *__init get_value(const struct file *cfg, const char *section,
     return NULL;
 }
 
-static void __init split_value(char *s)
-{
-    while ( *s && isspace(*s) )
-        ++s;
-    place_string(&mb_modules[mbi.mods_count].string, s);
-    while ( *s && !isspace(*s) )
-        ++s;
-    *s = 0;
-}
-
 static void __init setup_efi_pci(void)
 {
     EFI_STATUS status;
@@ -659,18 +678,19 @@ efi_start(EFI_HANDLE ImageHandle, EFI_SYSTEM_TABLE *SystemTable)
     EFI_LOADED_IMAGE *loaded_image;
     EFI_STATUS status;
     unsigned int i, argc;
-    CHAR16 **argv, *file_name, *cfg_file_name = NULL, *options = NULL;
+    CHAR16 **argv, *options = NULL;
     UINTN cols, rows, depth, size, info_size, gop_mode = ~0;
     EFI_HANDLE *handles = NULL;
     EFI_SHIM_LOCK_PROTOCOL *shim_lock;
     EFI_GRAPHICS_OUTPUT_PROTOCOL *gop = NULL;
     EFI_GRAPHICS_OUTPUT_MODE_INFORMATION *mode_info;
     EFI_FILE_HANDLE dir_handle;
-    union string section = { NULL }, name;
+    union string section = { NULL }, name, file_name, cfg_file_name = {NULL};
     bool_t base_video = 0;
     UINT32 mmap_desc_ver = 0;
     UINTN mmap_size, mmap_desc_size, mmap_key = 0;
     void *mmap;
+    char *option_str;
 
     efi_ih = ImageHandle;
     efi_bs = SystemTable->BootServices;
@@ -697,7 +717,7 @@ efi_start(EFI_HANDLE ImageHandle, EFI_SYSTEM_TABLE *SystemTable)
     trampoline_xen_phys_start = xen_phys_start;
 
     /* Get the file system interface. */
-    dir_handle = get_parent_handle(loaded_image, &file_name);
+    dir_handle = get_parent_handle(loaded_image, &file_name.w);
 
     argc = get_argv(0, NULL, loaded_image->LoadOptions,
                     loaded_image->LoadOptionsSize, &options);
@@ -721,9 +741,9 @@ efi_start(EFI_HANDLE ImageHandle, EFI_SYSTEM_TABLE *SystemTable)
             if ( wstrcmp(ptr + 1, L"basevideo") == 0 )
                 base_video = 1;
             else if ( wstrncmp(ptr + 1, L"cfg=", 4) == 0 )
-                cfg_file_name = ptr + 5;
+                cfg_file_name.w = ptr + 5;
             else if ( i + 1 < argc && wstrcmp(ptr + 1, L"cfg") == 0 )
-                cfg_file_name = argv[++i];
+                cfg_file_name.w = argv[++i];
             else if ( wstrcmp(ptr + 1, L"help") == 0 ||
                       (ptr[1] == L'?' && !ptr[2]) )
             {
@@ -795,24 +815,24 @@ efi_start(EFI_HANDLE ImageHandle, EFI_SYSTEM_TABLE *SystemTable)
         gop = NULL;
 
     /* Read and parse the config file. */
-    if ( !cfg_file_name )
+    if ( !cfg_file_name.w )
     {
         CHAR16 *tail;
 
-        while ( (tail = point_tail(file_name)) != NULL )
+        while ( (tail = point_tail(file_name.w)) != NULL )
         {
             wstrcpy(tail, L".cfg");
-            if ( read_file(dir_handle, file_name, &cfg) )
+            if ( read_file(dir_handle, &cfg, file_name.w, NULL) )
                 break;
             *tail = 0;
         }
         if ( !tail )
             blexit(L"No configuration file found.");
         PrintStr(L"Using configuration file '");
-        PrintStr(file_name);
+        PrintStr(file_name.w);
         PrintStr(L"'\r\n");
     }
-    else if ( !read_file(dir_handle, cfg_file_name, &cfg) )
+    else if ( !read_file(dir_handle, &cfg, cfg_file_name.w, NULL) )
         blexit(L"Configuration file not found.");
     pre_parse(&cfg);
 
@@ -831,7 +851,7 @@ efi_start(EFI_HANDLE ImageHandle, EFI_SYSTEM_TABLE *SystemTable)
             break;
         efi_bs->FreePages(cfg.addr, PFN_UP(cfg.size));
         cfg.addr = 0;
-        if ( !read_file(dir_handle, s2w(&name), &cfg) )
+        if ( !read_file(dir_handle, &cfg, s2w(&name), NULL) )
         {
             PrintStr(L"Chained configuration file '");
             PrintStr(name.w);
@@ -846,8 +866,8 @@ efi_start(EFI_HANDLE ImageHandle, EFI_SYSTEM_TABLE *SystemTable)
 
     efi_arch_cfg_file_early(dir_handle, section.s);
 
-    split_value(name.s);
-    read_file(dir_handle, s2w(&name), &kernel);
+    option_str = split_string(name.s);
+    read_file(dir_handle, &kernel, s2w(&name), option_str);
     efi_bs->FreePool(name.w);
 
     if ( !EFI_ERROR(efi_bs->LocateProtocol(&shim_lock_guid, NULL,
@@ -858,16 +878,16 @@ efi_start(EFI_HANDLE ImageHandle, EFI_SYSTEM_TABLE *SystemTable)
     name.s = get_value(&cfg, section.s, "ramdisk");
     if ( name.s )
     {
-        split_value(name.s);
-        read_file(dir_handle, s2w(&name), &ramdisk);
+        option_str = split_string(name.s);
+        read_file(dir_handle, &ramdisk, s2w(&name), option_str);
         efi_bs->FreePool(name.w);
     }
 
     name.s = get_value(&cfg, section.s, "xsm");
     if ( name.s )
     {
-        split_value(name.s);
-        read_file(dir_handle, s2w(&name), &xsm);
+        option_str = split_string(name.s);
+        read_file(dir_handle, &xsm, s2w(&name), option_str);
         efi_bs->FreePool(name.w);
     }
 
diff --git a/xen/include/asm-x86/efi-boot.h b/xen/include/asm-x86/efi-boot.h
index 2902970..3902b6c 100644
--- a/xen/include/asm-x86/efi-boot.h
+++ b/xen/include/asm-x86/efi-boot.h
@@ -267,6 +267,7 @@ static void __init efi_arch_cfg_file_early(EFI_FILE_HANDLE dir_handle, char *sec
 static void __init efi_arch_cfg_file_late(EFI_FILE_HANDLE dir_handle, char *section)
 {
     union string name;
+    char *options;
 
     name.s = get_value(&cfg, section, "ucode");
     if ( !name.s )
@@ -274,8 +275,8 @@ static void __init efi_arch_cfg_file_late(EFI_FILE_HANDLE dir_handle, char *sect
     if ( name.s )
     {
         microcode_set_module(mbi.mods_count);
-        split_value(name.s);
-        read_file(dir_handle, s2w(&name), &ucode);
+        options = split_string(name.s);
+        read_file(dir_handle, &ucode, s2w(&name), options);
         efi_bs->FreePool(name.w);
     }
 }
@@ -575,3 +576,30 @@ static void __init efi_arch_memory(void)
     l3_bootmap[l3_table_offset(xen_phys_start + (8 << L2_PAGETABLE_SHIFT) - 1)] =
         l3e_from_paddr((UINTN)l2_bootmap, __PAGE_HYPERVISOR);
 }
+
+static void __init efi_arch_handle_module(struct file *file, const CHAR16 *name,
+                                          char *options)
+{
+    union string local_name;
+    void *ptr;
+
+    /*
+     * Make a copy, as conversion is destructive, and caller still wants
+     * wide string available after this call returns.
+     */
+    if ( efi_bs->AllocatePool(EfiLoaderData, (wstrlen(name) + 1) * sizeof(*name),
+                              &ptr) != EFI_SUCCESS )
+        blexit(L"ERROR Unable to allocate string buffer\r\n");
+
+    local_name.w = ptr;
+    wstrcpy(local_name.w, name);
+    w2s(&local_name);
+
+    place_string(&mb_modules[mbi.mods_count].string, options);
+    place_string(&mb_modules[mbi.mods_count].string, "");
+    place_string(&mb_modules[mbi.mods_count].string, local_name.s);
+    mb_modules[mbi.mods_count].mod_start = file->addr >> PAGE_SHIFT;
+    mb_modules[mbi.mods_count].mod_end = file->size;
+    ++mbi.mods_count;
+    efi_bs->FreePool(ptr);
+}
-- 
2.1.0

  parent reply	other threads:[~2014-09-18 22:50 UTC|newest]

Thread overview: 63+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-18 22:49 [PATCH V5 00/15] arm64 EFI stub Roy Franz
2014-09-18 22:49 ` [PATCH V5 01/15] move x86 EFI boot/runtime code to common/efi Roy Franz
2014-09-19  8:49   ` Jan Beulich
2014-09-22 10:51     ` Ian Campbell
2014-09-18 22:49 ` [PATCH V5 02/15] Move x86 specific funtions/variables to arch header Roy Franz
2014-09-19  8:37   ` Jan Beulich
2014-09-22 10:52     ` Ian Campbell
2014-09-22 10:56       ` Jan Beulich
2014-09-22 11:09         ` Ian Campbell
2014-09-22 11:31           ` Jan Beulich
2014-09-22 12:54   ` Jan Beulich
2014-09-23  2:08     ` Roy Franz
2014-09-23 12:24       ` Jan Beulich
2014-09-24  2:35         ` Roy Franz
2014-09-24  8:12           ` Jan Beulich
2014-09-18 22:49 ` [PATCH V5 03/15] create arch functions to allocate memory for and process EFI memory map Roy Franz
2014-09-19  8:47   ` Jan Beulich
2014-09-23  1:14     ` Roy Franz
2014-09-18 22:49 ` [PATCH V5 04/15] Add architecture functions for pre/post ExitBootServices Roy Franz
2014-09-22 12:11   ` Jan Beulich
2014-09-18 22:49 ` [PATCH V5 05/15] Add efi_arch_cfg_file_early/late() to handle arch specific cfg file fields Roy Franz
2014-09-22 12:13   ` Jan Beulich
2014-09-18 22:49 ` [PATCH V5 06/15] Add efi_arch_handle_cmdline() for processing commandline Roy Franz
2014-09-22 12:17   ` Jan Beulich
2014-09-23  1:40     ` Roy Franz
2014-09-23 12:25       ` Jan Beulich
2014-09-24  0:09         ` Roy Franz
2014-09-24  8:13           ` Jan Beulich
2014-09-24  9:33             ` Ian Campbell
2014-09-24 11:34               ` Jan Beulich
2014-09-18 22:49 ` [PATCH V5 07/15] Move x86 specific disk probing code Roy Franz
2014-09-22 12:20   ` Jan Beulich
2014-09-23  1:44     ` Roy Franz
2014-09-18 22:49 ` [PATCH V5 08/15] Create arch functions for console and video init Roy Franz
2014-09-22 12:21   ` Jan Beulich
2014-09-18 22:50 ` [PATCH V5 09/15] Add efi_arch_memory() for arch specific memory setup Roy Franz
2014-09-22 12:24   ` Jan Beulich
2014-09-23  1:45     ` Roy Franz
2014-09-18 22:50 ` Roy Franz [this message]
2014-09-22 12:44   ` [PATCH V5 10/15] Add arch specific module handling to read_file() Jan Beulich
2014-09-23  1:57     ` Roy Franz
2014-09-23 12:28       ` Jan Beulich
2014-09-23 12:41         ` Ian Campbell
2014-09-23 12:55           ` Jan Beulich
2014-09-24  1:23       ` Roy Franz
2014-09-24  4:43         ` Roy Franz
2014-09-24  8:18         ` Jan Beulich
2014-09-18 22:50 ` [PATCH V5 11/15] Add several misc. arch functions for EFI boot code Roy Franz
2014-09-22 12:45   ` Jan Beulich
2014-09-18 22:50 ` [PATCH V5 12/15] Add efi_arch_use_config_file() function to control use of config file Roy Franz
2014-09-22 12:48   ` Jan Beulich
2014-09-23  1:59     ` Roy Franz
2014-09-18 22:50 ` [PATCH V5 13/15] add arm64 cache flushing code from linux v3.16 Roy Franz
2014-09-22 10:54   ` Ian Campbell
2014-09-22 23:42     ` Roy Franz
2014-09-23  7:42       ` Ian Campbell
2014-09-18 22:50 ` [PATCH V5 14/15] Update libfdt to v1.4.0 Roy Franz
2014-09-22 11:20   ` Ian Campbell
2014-09-22 23:57     ` Roy Franz
2014-09-23  7:43       ` Ian Campbell
2014-09-18 22:50 ` [PATCH V5 15/15] Add ARM EFI boot support Roy Franz
2014-09-22 11:20   ` Ian Campbell
2014-09-22 23:50     ` Roy Franz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1411080607-32365-11-git-send-email-roy.franz@linaro.org \
    --to=roy.franz@linaro.org \
    --cc=fu.wei@linaro.org \
    --cc=ian.campbell@citrix.com \
    --cc=jbeulich@suse.com \
    --cc=keir@xen.org \
    --cc=stefano.stabellini@citrix.com \
    --cc=tim@xen.org \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).