xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Don Slutz <dslutz@verizon.com>
To: xen-devel@lists.xen.org
Cc: Kevin Tian <kevin.tian@intel.com>, Keir Fraser <keir@xen.org>,
	Ian Campbell <ian.campbell@citrix.com>,
	Stefano Stabellini <stefano.stabellini@eu.citrix.com>,
	Jun Nakajima <jun.nakajima@intel.com>,
	Eddie Dong <eddie.dong@intel.com>,
	Ian Jackson <ian.jackson@eu.citrix.com>,
	Don Slutz <dslutz@verizon.com>, Tim Deegan <tim@xen.org>,
	George Dunlap <George.Dunlap@eu.citrix.com>,
	Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>,
	Jan Beulich <jbeulich@suse.com>,
	Andrew Cooper <andrew.cooper3@citrix.com>,
	Boris Ostrovsky <boris.ostrovsky@oracle.com>,
	Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Subject: [PATCH for-4.5 v6 02/16] tools: Add vmware_hw support
Date: Sat, 20 Sep 2014 14:07:13 -0400	[thread overview]
Message-ID: <1411236447-7435-3-git-send-email-dslutz@verizon.com> (raw)
In-Reply-To: <1411236447-7435-1-git-send-email-dslutz@verizon.com>

This is used to set HVM_PARAM_VMWARE_HW. It is set to the VMware
virtual hardware version.

Currently 0, 3-4, 6-11 are good values.  However the code only
checks for == 0 or != 0.

If non-zero then
  default VGA to VMware's VGA.

Also now allows vga=vmware

Signed-off-by: Don Slutz <dslutz@verizon.com>
---
v5:
      Anything looking for Xen according to the Xen cpuid instructions...
        Adjusted doc to new wording.

 docs/man/xl.cfg.pod.5               | 21 +++++++++++++++++++--
 docs/misc/hypervisor-cpuid.markdown | 28 ++++++++++++++++++++++++++++
 tools/libxc/xc_domain_restore.c     | 14 ++++++++++++++
 tools/libxc/xc_domain_save.c        | 11 +++++++++++
 tools/libxc/xg_save_restore.h       |  2 ++
 tools/libxl/libxl.h                 | 10 ++++++++++
 tools/libxl/libxl_create.c          |  4 +++-
 tools/libxl/libxl_dm.c              | 10 +++++++++-
 tools/libxl/libxl_dom.c             |  2 ++
 tools/libxl/libxl_types.idl         |  2 ++
 tools/libxl/xl_cmdimpl.c            | 11 ++++++++++-
 11 files changed, 110 insertions(+), 5 deletions(-)
 create mode 100644 docs/misc/hypervisor-cpuid.markdown

diff --git a/docs/man/xl.cfg.pod.5 b/docs/man/xl.cfg.pod.5
index 517ae2f..367b401 100644
--- a/docs/man/xl.cfg.pod.5
+++ b/docs/man/xl.cfg.pod.5
@@ -1147,6 +1147,23 @@ some other Operating Systems and in some circumstance can prevent
 Xen's own paravirtualisation interfaces for HVM guests from being
 used.
 
+=item B<vmware_hw=NUMBER>
+
+Turns on or off the exposure of VMware cpuid.  The number is the
+VMware's hardware version number, where 0 is off.  If not zero it
+changes the default VGA to VMware's VGA.
+
+The hardware version number (vmware_hw) come from VMware config files.
+
+=over 4
+
+In a .vmx it is virtualHW.version
+
+In a .ovf it is part of the value of vssd:VirtualSystemType.
+For vssd:VirtualSystemType == vmx-07, vmware_hw = 7.
+
+=back
+
 =back
 
 =head3 Emulated VGA Graphics Device
@@ -1185,8 +1202,8 @@ This option is deprecated, use vga="stdvga" instead.
 
 =item B<vga="STRING">
 
-Selects the emulated video card (none|stdvga|cirrus).
-The default is cirrus.
+Selects the emulated video card (none|stdvga|cirrus|vmware).
+The default is cirrus (or vmware if B<vmware_hw> is not zero).
 
 =item B<vnc=BOOLEAN>
 
diff --git a/docs/misc/hypervisor-cpuid.markdown b/docs/misc/hypervisor-cpuid.markdown
new file mode 100644
index 0000000..901a4e1
--- /dev/null
+++ b/docs/misc/hypervisor-cpuid.markdown
@@ -0,0 +1,28 @@
+Hypervisor Cpuid
+================
+
+The support of hypervisor cpuid leaves has not been agreed to.
+Other then the range 0x40000000 to 0x400000ff can be used by
+hypervisors.
+
+MicroSoft Hyper-V (AKA viridian) currently must be at 0x40000000.
+
+VMware currently must be at 0x40000000.
+
+KVM currently must be at 0x40000000 (from Seabios).
+
+Xen can be found at the first otherwise unused 0x100 aligned
+offset between 0x40000000 and 0x40010000.
+
+http://download.microsoft.com/download/F/B/0/FB0D01A3-8E3A-4F5F-AA59-08C8026D3B8A/requirements-for-implementing-microsoft-hypervisor-interface.docx
+
+http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1009458
+
+http://lwn.net/Articles/301888/
+  Attempted to get this cleaned up.
+
+So if Viridian or VMware_hw is selected, return their format for the
+range 0x40000000 to 0x400000ff. And return Xen format for the range
+0x40000100 to 0x400001ff.
+
+Otherwise return Xen format for the range 0x40000000 to 0x400000ff.
diff --git a/tools/libxc/xc_domain_restore.c b/tools/libxc/xc_domain_restore.c
index b9a56d5..bc5cd57 100644
--- a/tools/libxc/xc_domain_restore.c
+++ b/tools/libxc/xc_domain_restore.c
@@ -743,6 +743,7 @@ typedef struct {
     uint64_t vm_generationid_addr;
     uint64_t ioreq_server_pfn;
     uint64_t nr_ioreq_server_pages;
+    uint64_t vmware_hw;
 
     struct toolstack_data_t tdata;
 } pagebuf_t;
@@ -927,6 +928,16 @@ static int pagebuf_get_one(xc_interface *xch, struct restore_ctx *ctx,
         }
         return pagebuf_get_one(xch, ctx, buf, fd, dom);
 
+    case XC_SAVE_ID_HVM_VMWARE_HW:
+        /* Skip padding 4 bytes then read the vmware hw version. */
+        if ( RDEXACT(fd, &buf->vmware_hw, sizeof(uint32_t)) ||
+             RDEXACT(fd, &buf->vmware_hw, sizeof(uint64_t)) )
+        {
+            PERROR("error read the vmware_hw value");
+            return -1;
+        }
+        return pagebuf_get_one(xch, ctx, buf, fd, dom);
+
     case XC_SAVE_ID_TOOLSTACK:
         {
             if ( RDEXACT(fd, &buf->tdata.len, sizeof(buf->tdata.len)) )
@@ -1760,6 +1771,9 @@ int xc_domain_restore(xc_interface *xch, int io_fd, uint32_t dom,
         }
     }
 
+    if (pagebuf.vmware_hw != 0)
+        xc_set_hvm_param(xch, dom, HVM_PARAM_VMWARE_HW, pagebuf.vmware_hw);
+
     if (pagebuf.acpi_ioport_location == 1) {
         DBGPRINTF("Use new firmware ioport from the checkpoint\n");
         xc_hvm_param_set(xch, dom, HVM_PARAM_ACPI_IOPORTS_LOCATION, 1);
diff --git a/tools/libxc/xc_domain_save.c b/tools/libxc/xc_domain_save.c
index 254fdb3..76dc307 100644
--- a/tools/libxc/xc_domain_save.c
+++ b/tools/libxc/xc_domain_save.c
@@ -1750,6 +1750,17 @@ int xc_domain_save(xc_interface *xch, int io_fd, uint32_t dom, uint32_t max_iter
             PERROR("Error when writing the ioreq server gmfn count");
             goto out;
         }
+
+        chunk.id = XC_SAVE_ID_HVM_VMWARE_HW;
+        chunk.data = 0;
+        xc_hvm_param_get(xch, dom, HVM_PARAM_VMWARE_HW, &chunk.data);
+
+        if ( (chunk.data != 0) &&
+             wrexact(io_fd, &chunk, sizeof(chunk)) )
+        {
+            PERROR("Error when writing the vmware_hw value");
+            goto out;
+        }
     }
 
     if ( callbacks != NULL && callbacks->toolstack_save != NULL )
diff --git a/tools/libxc/xg_save_restore.h b/tools/libxc/xg_save_restore.h
index bdd9009..d185ba9 100644
--- a/tools/libxc/xg_save_restore.h
+++ b/tools/libxc/xg_save_restore.h
@@ -262,6 +262,8 @@
 /* These are a pair; it is an error for one to exist without the other */
 #define XC_SAVE_ID_HVM_IOREQ_SERVER_PFN -19
 #define XC_SAVE_ID_HVM_NR_IOREQ_SERVER_PAGES -20
+/* VMware data */
+#define XC_SAVE_ID_HVM_VMWARE_HW      -21
 
 /*
 ** We process save/restore/migrate in batches of pages; the below
diff --git a/tools/libxl/libxl.h b/tools/libxl/libxl.h
index bc68cac..14048e4 100644
--- a/tools/libxl/libxl.h
+++ b/tools/libxl/libxl.h
@@ -145,6 +145,16 @@
 #define LIBXL_HAVE_BUILDINFO_IOMEM_START_GFN 1
 
 /*
+ * The libxl_vga_interface_type has the type for vmware.
+ */
+#define LIBXL_HAVE_LIBXL_VGA_INTERFACE_TYPE_VMWARE 1
+
+/*
+ * libxl_domain_build_info has the u.hvm.vmware_hw field.
+ */
+#define LIBXL_HAVE_BUILDINFO_HVM_VMWARE_HW 1
+
+/*
  * libxl ABI compatibility
  *
  * The only guarantee which libxl makes regarding ABI compatibility
diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
index f7f178e..da79a18 100644
--- a/tools/libxl/libxl_create.c
+++ b/tools/libxl/libxl_create.c
@@ -428,13 +428,15 @@ int libxl__domain_build(libxl__gc *gc,
         vments[4] = "start_time";
         vments[5] = libxl__sprintf(gc, "%lu.%02d", start_time.tv_sec,(int)start_time.tv_usec/10000);
 
-        localents = libxl__calloc(gc, 7, sizeof(char *));
+        localents = libxl__calloc(gc, 9, sizeof(char *));
         localents[0] = "platform/acpi";
         localents[1] = libxl_defbool_val(info->u.hvm.acpi) ? "1" : "0";
         localents[2] = "platform/acpi_s3";
         localents[3] = libxl_defbool_val(info->u.hvm.acpi_s3) ? "1" : "0";
         localents[4] = "platform/acpi_s4";
         localents[5] = libxl_defbool_val(info->u.hvm.acpi_s4) ? "1" : "0";
+        localents[6] = "platform/vmware_hw";
+        localents[7] = libxl__sprintf(gc, "%"PRId64, info->u.hvm.vmware_hw);
 
         break;
     case LIBXL_DOMAIN_TYPE_PV:
diff --git a/tools/libxl/libxl_dm.c b/tools/libxl/libxl_dm.c
index 103cbca..d27b364 100644
--- a/tools/libxl/libxl_dm.c
+++ b/tools/libxl/libxl_dm.c
@@ -243,6 +243,9 @@ static char ** libxl__build_device_model_args_old(libxl__gc *gc,
         case LIBXL_VGA_INTERFACE_TYPE_NONE:
             flexarray_append_pair(dm_args, "-vga", "none");
             break;
+        case LIBXL_VGA_INTERFACE_TYPE_VMWARE:
+            flexarray_append_pair(dm_args, "-vga", "vmware");
+            break;
         }
 
         if (b_info->u.hvm.boot) {
@@ -555,7 +558,12 @@ static char ** libxl__build_device_model_args_new(libxl__gc *gc,
             break;
         case LIBXL_VGA_INTERFACE_TYPE_NONE:
             break;
-        }
+        case LIBXL_VGA_INTERFACE_TYPE_VMWARE:
+            flexarray_append_pair(dm_args, "-device",
+                GCSPRINTF("vmware-svga,vgamem_mb=%d",
+                libxl__sizekb_to_mb(b_info->video_memkb)));
+            break;
+            }
 
         if (b_info->u.hvm.boot) {
             flexarray_vappend(dm_args, "-boot",
diff --git a/tools/libxl/libxl_dom.c b/tools/libxl/libxl_dom.c
index ce0c4ac..be55d5f 100644
--- a/tools/libxl/libxl_dom.c
+++ b/tools/libxl/libxl_dom.c
@@ -219,6 +219,8 @@ static void hvm_set_conf_params(xc_interface *handle, uint32_t domid,
                     libxl_defbool_val(info->u.hvm.viridian));
     xc_hvm_param_set(handle, domid, HVM_PARAM_HPET_ENABLED,
                     libxl_defbool_val(info->u.hvm.hpet));
+    xc_set_hvm_param(handle, domid, HVM_PARAM_VMWARE_HW,
+                     info->u.hvm.vmware_hw);
 #endif
     xc_hvm_param_set(handle, domid, HVM_PARAM_TIMER_MODE, timer_mode(info));
     xc_hvm_param_set(handle, domid, HVM_PARAM_VPT_ALIGN,
diff --git a/tools/libxl/libxl_types.idl b/tools/libxl/libxl_types.idl
index f1fcbc3..907572c 100644
--- a/tools/libxl/libxl_types.idl
+++ b/tools/libxl/libxl_types.idl
@@ -172,6 +172,7 @@ libxl_vga_interface_type = Enumeration("vga_interface_type", [
     (1, "CIRRUS"),
     (2, "STD"),
     (3, "NONE"),
+    (4, "VMWARE"),
     ], init_val = "LIBXL_VGA_INTERFACE_TYPE_CIRRUS")
 
 libxl_vendor_device = Enumeration("vendor_device", [
@@ -378,6 +379,7 @@ libxl_domain_build_info = Struct("domain_build_info",[
                                        ("timeoffset",       string),
                                        ("hpet",             libxl_defbool),
                                        ("vpt_align",        libxl_defbool),
+                                       ("vmware_hw",        UInt(64, init_val = 0)),
                                        ("timer_mode",       libxl_timer_mode),
                                        ("nested_hvm",       libxl_defbool),
                                        ("smbios_firmware",  string),
diff --git a/tools/libxl/xl_cmdimpl.c b/tools/libxl/xl_cmdimpl.c
index 698b3bc..2119bd6 100644
--- a/tools/libxl/xl_cmdimpl.c
+++ b/tools/libxl/xl_cmdimpl.c
@@ -1038,6 +1038,8 @@ static void parse_config_data(const char *config_source,
         xlu_cfg_get_defbool(config, "hpet", &b_info->u.hvm.hpet, 0);
         xlu_cfg_get_defbool(config, "vpt_align", &b_info->u.hvm.vpt_align, 0);
 
+        if (!xlu_cfg_get_long(config, "vmware_hw",  &l, 1))
+            b_info->u.hvm.vmware_hw = l;
         if (!xlu_cfg_get_long(config, "timer_mode", &l, 1)) {
             const char *s = libxl_timer_mode_to_string(l);
             fprintf(stderr, "WARNING: specifying \"timer_mode\" as an integer is deprecated. "
@@ -1676,13 +1678,20 @@ skip_vfb:
                 b_info->u.hvm.vga.kind = LIBXL_VGA_INTERFACE_TYPE_CIRRUS;
             } else if (!strcmp(buf, "none")) {
                 b_info->u.hvm.vga.kind = LIBXL_VGA_INTERFACE_TYPE_NONE;
+            } else if (!strcmp(buf, "vmware")) {
+                b_info->u.hvm.vga.kind = LIBXL_VGA_INTERFACE_TYPE_VMWARE;
             } else {
                 fprintf(stderr, "Unknown vga \"%s\" specified\n", buf);
                 exit(1);
             }
         } else if (!xlu_cfg_get_long(config, "stdvga", &l, 0))
             b_info->u.hvm.vga.kind = l ? LIBXL_VGA_INTERFACE_TYPE_STD :
-                                         LIBXL_VGA_INTERFACE_TYPE_CIRRUS;
+                b_info->u.hvm.vmware_hw ? LIBXL_VGA_INTERFACE_TYPE_VMWARE :
+                                          LIBXL_VGA_INTERFACE_TYPE_CIRRUS;
+        else
+            b_info->u.hvm.vga.kind =
+                b_info->u.hvm.vmware_hw ? LIBXL_VGA_INTERFACE_TYPE_VMWARE :
+                                          LIBXL_VGA_INTERFACE_TYPE_CIRRUS;
 
         xlu_cfg_replace_string (config, "keymap", &b_info->u.hvm.keymap, 0);
         xlu_cfg_get_defbool (config, "spice", &b_info->u.hvm.spice.enable, 0);
-- 
1.8.4

  parent reply	other threads:[~2014-09-20 18:07 UTC|newest]

Thread overview: 93+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-20 18:07 [PATCH for-4.5 v6 00/16] Xen VMware tools support Don Slutz
2014-09-20 18:07 ` [PATCH for-4.5 v6 01/16] xen: Add support for VMware cpuid leaves Don Slutz
2014-09-22 11:49   ` Andrew Cooper
2014-09-22 16:53     ` Don Slutz
2014-09-24 14:33   ` George Dunlap
2014-09-20 18:07 ` Don Slutz [this message]
2014-09-22 13:34   ` [PATCH for-4.5 v6 02/16] tools: Add vmware_hw support Ian Campbell
2014-09-22 22:08     ` Don Slutz
2014-09-24 14:44   ` George Dunlap
2014-09-24 21:06     ` Don Slutz
2014-09-20 18:07 ` [PATCH for-4.5 v6 03/16] vmware: Add VMware provided include files Don Slutz
2014-09-20 18:07 ` [PATCH for-4.5 v6 04/16] xen: Add vmware_port support Don Slutz
2014-09-23 17:16   ` Boris Ostrovsky
2014-09-24  8:28     ` Jan Beulich
2014-09-26 19:09     ` Don Slutz
2014-09-24 16:01   ` George Dunlap
2014-09-24 16:48     ` Don Slutz
2014-09-24 17:42       ` Andrew Cooper
2014-09-20 18:07 ` [PATCH for-4.5 v6 05/16] tools: " Don Slutz
2014-09-22 13:41   ` Ian Campbell
2014-09-22 16:34     ` Andrew Cooper
2014-09-22 21:22       ` Don Slutz
2014-09-24 16:24         ` George Dunlap
2014-09-24 18:25           ` Don Slutz
2014-09-22 16:42     ` Don Slutz
2014-09-23 12:20       ` Ian Campbell
2014-09-24 16:31         ` Don Slutz
2014-09-24 16:44           ` George Dunlap
2014-09-24 18:29             ` Don Slutz
2014-09-25 11:24           ` Ian Campbell
2014-09-25 14:17             ` George Dunlap
2014-09-25 14:21               ` Ian Campbell
2014-09-26 19:19             ` Don Slutz
2014-09-20 18:07 ` [PATCH for-4.5 v6 06/16] xen: Convert vmware_port to xentrace usage Don Slutz
2014-09-24 17:27   ` George Dunlap
2014-09-24 19:07     ` Don Slutz
2014-09-25 15:14       ` George Dunlap
2014-09-29 18:10         ` Don Slutz
2014-09-20 18:07 ` [PATCH for-4.5 v6 07/16] tools: " Don Slutz
2014-09-25 15:18   ` George Dunlap
2014-09-20 18:07 ` [PATCH for-4.5 v6 08/16] xen: Add limited support of VMware's hyper-call rpc Don Slutz
2014-09-22 13:47   ` Ian Campbell
2014-09-22 21:18     ` Don Slutz
2014-09-23 12:34       ` Ian Campbell
2014-09-23 22:03         ` Slutz, Donald Christopher
2014-09-25 16:28     ` George Dunlap
2014-09-20 18:07 ` [PATCH for-4.5 v6 09/16] tools: " Don Slutz
2014-09-22 13:52   ` Ian Campbell
2014-09-22 21:32     ` Don Slutz
2014-09-23 12:35       ` Ian Campbell
2014-09-20 18:07 ` [PATCH for-4.5 v6 10/16] Add VMware tool's triggers Don Slutz
2014-09-20 18:07 ` [PATCH for-4.5 v6 11/16] Add live migration of VMware's hyper-call RPC Don Slutz
2014-09-20 18:07 ` [PATCH for-4.5 v6 12/16] Add dump of HVM_SAVE_CODE(VMPORT) to xen-hvmctx Don Slutz
2014-09-20 18:07 ` [OPTIONAL][PATCH for-4.5 v6 13/16] Add xen-hvm-param Don Slutz
2014-09-20 18:07 ` [OPTIONAL][PATCH for-4.5 v6 14/16] Add xen-vmware-guestinfo Don Slutz
2014-09-20 18:07 ` [OPTIONAL][PATCH for-4.5 v6 15/16] Add xen-list-vmware-guestinfo Don Slutz
2014-09-20 18:07 ` [OPTIONAL][PATCH for-4.5 v6 16/16] Add xen-hvm-send-trigger Don Slutz
2014-09-22 13:56 ` [PATCH for-4.5 v6 00/16] Xen VMware tools support Ian Campbell
2014-09-22 15:19   ` George Dunlap
2014-09-22 15:34     ` Ian Campbell
2014-09-22 15:38       ` George Dunlap
2014-09-22 15:50         ` Ian Campbell
2014-09-22 15:55           ` George Dunlap
2014-09-22 17:19             ` Don Slutz
2014-09-22 22:00               ` Tian, Kevin
2014-09-23 12:30               ` Ian Campbell
2014-09-23 12:35                 ` George Dunlap
2014-09-23 12:40                   ` Ian Campbell
2014-09-24 15:52                 ` George Dunlap
2014-09-24 18:09                   ` Don Slutz
2014-09-24 17:19                 ` Don Slutz
2014-09-24 20:21                   ` Konrad Rzeszutek Wilk
2014-09-26 19:03                     ` Don Slutz
2014-09-26 19:28                       ` Konrad Rzeszutek Wilk
2014-09-25 11:35                   ` Ian Campbell
2014-09-22 16:18         ` Jan Beulich
2014-09-22 18:32           ` Don Slutz
2014-09-25 10:37           ` Tim Deegan
2014-09-26 20:00             ` Don Slutz
2014-09-29  6:50               ` Jan Beulich
2014-09-29 13:27                 ` George Dunlap
2014-09-29 13:49                   ` Jan Beulich
2014-09-29 23:13                   ` Don Slutz
2014-09-30  7:05                     ` Jan Beulich
2014-09-30 10:02                       ` George Dunlap
2014-09-30 22:11                         ` Slutz, Donald Christopher
2014-09-30 10:09                     ` George Dunlap
2014-09-30 22:23                       ` Slutz, Donald Christopher
2014-10-02 10:05               ` Tim Deegan
2014-10-02 19:20                 ` Don Slutz
2014-10-03  7:09                   ` Tim Deegan
2014-09-22 15:52       ` Andrew Cooper
2014-09-22 18:39         ` Don Slutz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1411236447-7435-3-git-send-email-dslutz@verizon.com \
    --to=dslutz@verizon.com \
    --cc=Aravind.Gopalakrishnan@amd.com \
    --cc=George.Dunlap@eu.citrix.com \
    --cc=andrew.cooper3@citrix.com \
    --cc=boris.ostrovsky@oracle.com \
    --cc=eddie.dong@intel.com \
    --cc=ian.campbell@citrix.com \
    --cc=ian.jackson@eu.citrix.com \
    --cc=jbeulich@suse.com \
    --cc=jun.nakajima@intel.com \
    --cc=keir@xen.org \
    --cc=kevin.tian@intel.com \
    --cc=stefano.stabellini@eu.citrix.com \
    --cc=suravee.suthikulpanit@amd.com \
    --cc=tim@xen.org \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).