* [PATCH 2/3] xen/arm: Update early print console UART address for Broadcom 7445D0.
@ 2014-09-30 22:57 Jon Fraser
2014-10-01 15:30 ` Julien Grall
0 siblings, 1 reply; 5+ messages in thread
From: Jon Fraser @ 2014-09-30 22:57 UTC (permalink / raw)
To: xen-devel; +Cc: Jon Fraser
The console UART address changed between chip versions C0 and D0.
Broadcom 7445[ABC]0 verions were not released and are not supported.
Signed-off-by: Jon Fraser <jfraser@broadcom.com>
---
xen/arch/arm/Rules.mk | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/xen/arch/arm/Rules.mk b/xen/arch/arm/Rules.mk
index 26fafa2..d369b40 100644
--- a/xen/arch/arm/Rules.mk
+++ b/xen/arch/arm/Rules.mk
@@ -86,7 +86,7 @@ EARLY_UART_REG_SHIFT := 2
endif
ifeq ($(CONFIG_EARLY_PRINTK), brcm)
EARLY_PRINTK_INC := 8250
-EARLY_UART_BASE_ADDRESS := 0xF0406B00
+EARLY_UART_BASE_ADDRESS := 0xF040AB00
EARLY_UART_REG_SHIFT := 2
endif
ifeq ($(CONFIG_EARLY_PRINTK), xgene-storm)
--
1.9.0.138.g2de3478
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 2/3] xen/arm: Update early print console UART address for Broadcom 7445D0.
2014-09-30 22:57 [PATCH 2/3] xen/arm: Update early print console UART address for Broadcom 7445D0 Jon Fraser
@ 2014-10-01 15:30 ` Julien Grall
2014-10-01 15:31 ` Julien Grall
0 siblings, 1 reply; 5+ messages in thread
From: Julien Grall @ 2014-10-01 15:30 UTC (permalink / raw)
To: Jon Fraser, xen-devel, Ian Campbell, Stefano Stabellini,
Tim Deegan
Hello Jon,
On 09/30/2014 11:57 PM, Jon Fraser wrote:
> The console UART address changed between chip versions C0 and D0.
> Broadcom 7445[ABC]0 verions were not released and are not supported.
>
> Signed-off-by: Jon Fraser <jfraser@broadcom.com>
Reviewed-by: Julien Grall <julien.grall@linaro.org>
> ---
> xen/arch/arm/Rules.mk | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/xen/arch/arm/Rules.mk b/xen/arch/arm/Rules.mk
> index 26fafa2..d369b40 100644
> --- a/xen/arch/arm/Rules.mk
> +++ b/xen/arch/arm/Rules.mk
> @@ -86,7 +86,7 @@ EARLY_UART_REG_SHIFT := 2
> endif
> ifeq ($(CONFIG_EARLY_PRINTK), brcm)
> EARLY_PRINTK_INC := 8250
> -EARLY_UART_BASE_ADDRESS := 0xF0406B00
> +EARLY_UART_BASE_ADDRESS := 0xF040AB00
> EARLY_UART_REG_SHIFT := 2
> endif
> ifeq ($(CONFIG_EARLY_PRINTK), xgene-storm)
>
Regards,
--
Julien Grall
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 2/3] xen/arm: Update early print console UART address for Broadcom 7445D0.
2014-10-01 15:30 ` Julien Grall
@ 2014-10-01 15:31 ` Julien Grall
2014-10-02 15:53 ` Julien Grall
0 siblings, 1 reply; 5+ messages in thread
From: Julien Grall @ 2014-10-01 15:31 UTC (permalink / raw)
To: Jon Fraser, xen-devel, Ian Campbell, Stefano Stabellini,
Tim Deegan
On 10/01/2014 04:30 PM, Julien Grall wrote:
> Hello Jon,
>
> On 09/30/2014 11:57 PM, Jon Fraser wrote:
>> The console UART address changed between chip versions C0 and D0.
>> Broadcom 7445[ABC]0 verions were not released and are not supported.
Hmmm... forgot about the NIT:
s/verions/versions/
>> Signed-off-by: Jon Fraser <jfraser@broadcom.com>
> Reviewed-by: Julien Grall <julien.grall@linaro.org>
>
>> ---
>> xen/arch/arm/Rules.mk | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/xen/arch/arm/Rules.mk b/xen/arch/arm/Rules.mk
>> index 26fafa2..d369b40 100644
>> --- a/xen/arch/arm/Rules.mk
>> +++ b/xen/arch/arm/Rules.mk
>> @@ -86,7 +86,7 @@ EARLY_UART_REG_SHIFT := 2
>> endif
>> ifeq ($(CONFIG_EARLY_PRINTK), brcm)
>> EARLY_PRINTK_INC := 8250
>> -EARLY_UART_BASE_ADDRESS := 0xF0406B00
>> +EARLY_UART_BASE_ADDRESS := 0xF040AB00
>> EARLY_UART_REG_SHIFT := 2
>> endif
>> ifeq ($(CONFIG_EARLY_PRINTK), xgene-storm)
>>
>
> Regards,
>
--
Julien Grall
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 2/3] xen/arm: Update early print console UART address for Broadcom 7445D0.
2014-10-01 15:31 ` Julien Grall
@ 2014-10-02 15:53 ` Julien Grall
2014-10-02 16:18 ` Jonathan Fraser
0 siblings, 1 reply; 5+ messages in thread
From: Julien Grall @ 2014-10-02 15:53 UTC (permalink / raw)
To: Jon Fraser, xen-devel, Ian Campbell, Stefano Stabellini,
Tim Deegan
Hello Jon,
On 10/01/2014 04:31 PM, Julien Grall wrote:
> On 10/01/2014 04:30 PM, Julien Grall wrote:
>> Hello Jon,
>>
>> On 09/30/2014 11:57 PM, Jon Fraser wrote:
>>> The console UART address changed between chip versions C0 and D0.
>>> Broadcom 7445[ABC]0 verions were not released and are not supported.
>
> Hmmm... forgot about the NIT:
>
> s/verions/versions/
One last thing, sorry...
Could you update docs/misc/arm/early-printk.txt to add an entry for your
new board?
Thanks,
--
Julien Grall
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 2/3] xen/arm: Update early print console UART address for Broadcom 7445D0.
2014-10-02 15:53 ` Julien Grall
@ 2014-10-02 16:18 ` Jonathan Fraser
0 siblings, 0 replies; 5+ messages in thread
From: Jonathan Fraser @ 2014-10-02 16:18 UTC (permalink / raw)
To: Julien Grall
Cc: Jonathan Fraser, Tim Deegan, Ian Campbell, Stefano Stabellini,
xen-devel@lists.xen.org
On Thu, 2014-10-02 at 16:53 +0100, Julien Grall wrote:
> Hello Jon,
>
> On 10/01/2014 04:31 PM, Julien Grall wrote:
> > On 10/01/2014 04:30 PM, Julien Grall wrote:
> >> Hello Jon,
> >>
> >> On 09/30/2014 11:57 PM, Jon Fraser wrote:
> >>> The console UART address changed between chip versions C0 and D0.
> >>> Broadcom 7445[ABC]0 verions were not released and are not supported.
> >
> > Hmmm... forgot about the NIT:
> >
> > s/verions/versions/
>
> One last thing, sorry...
>
> Could you update docs/misc/arm/early-printk.txt to add an entry for your
> new board?
>
> Thanks,
>
Sure.
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-10-02 16:18 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-09-30 22:57 [PATCH 2/3] xen/arm: Update early print console UART address for Broadcom 7445D0 Jon Fraser
2014-10-01 15:30 ` Julien Grall
2014-10-01 15:31 ` Julien Grall
2014-10-02 15:53 ` Julien Grall
2014-10-02 16:18 ` Jonathan Fraser
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).