Re: [V2 0/3] Introduce AMD Seattle platform support

[Ian Campbell <Ian.Campbell@citrix.com>]

On Wed, 2014-10-01 at 14:51 -0500, suravee.suthikulpanit@amd.com wrote:

Since we are post feature freeze this needs an ack from the release
manager, Konrad CCd.

Konrad, this is similar to the bcm series in that the only damage it can
do is to the new platform being added. I think we should take it for
4.5.

> From: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
> 
> This patch series introduce minimal support for AMD Seattle system.
> This has been tested to boot into dom0 and domU.
> 
> The is platform currently using spintable as multi-core booting protocol.
> However, it does supports system_off and system_reset from PSCI-0.2.
> The firmware will support full PSCI-0.2 supports (except MIGRATION)
> in the future.
> 
> It also introduces GIC-400 device-tree matching string.
> 
> Changes from V1:
>     * Remove dependency of system_off/reset of the Seattle platform
>       from PSCI subsystem.
>     * PSCI stuff is not re-submitted as a separate patch series.
> 
> Suravee Suthikulpanit (3):
>   gicv2: Add compatibility id for gic-400
>   amd/seattle: Add early printk message for the platform
>   amd/seattle: Initial revision of AMD Seattle support
> 
>  xen/arch/arm/Rules.mk            |  5 +++
>  xen/arch/arm/gic-v2.c            |  1 +
>  xen/arch/arm/platforms/Makefile  |  1 +
>  xen/arch/arm/platforms/seattle.c | 69 ++++++++++++++++++++++++++++++++++++++++
>  xen/include/asm-arm/gic.h        |  4 ++-
>  5 files changed, 79 insertions(+), 1 deletion(-)
>  create mode 100644 xen/arch/arm/platforms/seattle.c
>