Xen-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Wei Liu <wei.liu2@citrix.com>
To: xen-devel@lists.xen.org
Cc: Ian Jackson <ian.jackson@eu.citrix.com>,
	Dario Faggioli <dario.faggioli@citrix.com>,
	Wei Liu <wei.liu2@citrix.com>,
	Ian Campbell <ian.campbell@citrix.com>,
	Elena Ufimtseva <ufimtseva@gmail.com>
Subject: [PATCH v8 07/21] libxl: introduce libxl__vnuma_config_check
Date: Mon, 16 Mar 2015 09:52:26 +0000	[thread overview]
Message-ID: <1426499560-28514-8-git-send-email-wei.liu2@citrix.com> (raw)
In-Reply-To: <1426499560-28514-1-git-send-email-wei.liu2@citrix.com>

This function is used to check whether vNUMA configuration (be it
auto-generated or supplied by user) is valid.

Define a new error code ERROR_VNUMA_CONFIG_INVALID.

The checks performed can be found in the comment of the function.

This vNUMA function (and future ones) is placed in a new file called
libxl_vnuma.c

Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Elena Ufimtseva <ufimtseva@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
---
Changes in v7:
1. Use PRIu32 for uint32_t.

Changes in v6:
1. Address comments from Andrew.
2. Check vdistances.
3. use libxl_numainfo_list_free.
4. Change p to v.

Changes in v5:
1. Define and use new error code.
2. Use LOG macro.
3. Fix hard tabs.

Changes in v4:
1. Adapt to new interface.

Changes in v3:
1. Rewrite commit log.
2. Shorten two error messages.
---
 tools/libxl/Makefile         |   2 +-
 tools/libxl/libxl_internal.h |   7 ++
 tools/libxl/libxl_types.idl  |   1 +
 tools/libxl/libxl_vnuma.c    | 151 +++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 160 insertions(+), 1 deletion(-)
 create mode 100644 tools/libxl/libxl_vnuma.c

diff --git a/tools/libxl/Makefile b/tools/libxl/Makefile
index 7329521..1b16598 100644
--- a/tools/libxl/Makefile
+++ b/tools/libxl/Makefile
@@ -93,7 +93,7 @@ LIBXL_LIBS += -lyajl
 LIBXL_OBJS = flexarray.o libxl.o libxl_create.o libxl_dm.o libxl_pci.o \
 			libxl_dom.o libxl_exec.o libxl_xshelp.o libxl_device.o \
 			libxl_internal.o libxl_utils.o libxl_uuid.o \
-			libxl_json.o libxl_aoutils.o libxl_numa.o \
+			libxl_json.o libxl_aoutils.o libxl_numa.o libxl_vnuma.o \
 			libxl_save_callout.o _libxl_save_msgs_callout.o \
 			libxl_qmp.o libxl_event.o libxl_fork.o $(LIBXL_OBJS-y)
 LIBXL_OBJS += libxl_genid.o
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index 6d3ac58..258be0d 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -3394,6 +3394,13 @@ void libxl__numa_candidate_put_nodemap(libxl__gc *gc,
     libxl_bitmap_copy(CTX, &cndt->nodemap, nodemap);
 }
 
+/* Check if vNUMA config is valid. Returns 0 if valid,
+ * ERROR_VNUMA_CONFIG_INVALID otherwise.
+ */
+int libxl__vnuma_config_check(libxl__gc *gc,
+                              const libxl_domain_build_info *b_info,
+                              const libxl__domain_build_state *state);
+
 _hidden int libxl__ms_vm_genid_set(libxl__gc *gc, uint32_t domid,
                                    const libxl_ms_vm_genid *id);
 
diff --git a/tools/libxl/libxl_types.idl b/tools/libxl/libxl_types.idl
index 8e46e12..0866433 100644
--- a/tools/libxl/libxl_types.idl
+++ b/tools/libxl/libxl_types.idl
@@ -63,6 +63,7 @@ libxl_error = Enumeration("error", [
     (-17, "DEVICE_EXISTS"),
     (-18, "REMUS_DEVOPS_DOES_NOT_MATCH"),
     (-19, "REMUS_DEVICE_NOT_SUPPORTED"),
+    (-20, "VNUMA_CONFIG_INVALID"),
     ], value_namespace = "")
 
 libxl_domain_type = Enumeration("domain_type", [
diff --git a/tools/libxl/libxl_vnuma.c b/tools/libxl/libxl_vnuma.c
new file mode 100644
index 0000000..89532ef
--- /dev/null
+++ b/tools/libxl/libxl_vnuma.c
@@ -0,0 +1,151 @@
+/*
+ * Copyright (C) 2014      Citrix Ltd.
+ * Author Wei Liu <wei.liu2@citrix.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published
+ * by the Free Software Foundation; version 2.1 only. with the special
+ * exception on linking described in file LICENSE.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU Lesser General Public License for more details.
+ */
+#include "libxl_osdeps.h" /* must come before any other headers */
+#include "libxl_internal.h"
+#include <stdlib.h>
+
+/* Sort vmemranges in ascending order with "start" */
+static int compare_vmemrange(const void *a, const void *b)
+{
+    const xen_vmemrange_t *x = a, *y = b;
+    if (x->start < y->start)
+        return -1;
+    if (x->start > y->start)
+        return 1;
+    return 0;
+}
+
+/* Check if vNUMA configuration is valid:
+ *  1. all pnodes inside vnode_to_pnode array are valid
+ *  2. each vcpu belongs to one and only one vnode
+ *  3. each vmemrange is valid and doesn't overlap with any other
+ *  4. local distance cannot be larger than remote distance
+ */
+int libxl__vnuma_config_check(libxl__gc *gc,
+                              const libxl_domain_build_info *b_info,
+                              const libxl__domain_build_state *state)
+{
+    int nr_nodes = 0, rc = ERROR_VNUMA_CONFIG_INVALID;
+    unsigned int i, j;
+    libxl_numainfo *ninfo = NULL;
+    uint64_t total_memkb = 0;
+    libxl_bitmap cpumap;
+    libxl_vnode_info *v;
+
+    libxl_bitmap_init(&cpumap);
+
+    /* Check pnode specified is valid */
+    ninfo = libxl_get_numainfo(CTX, &nr_nodes);
+    if (!ninfo) {
+        LOG(ERROR, "libxl_get_numainfo failed");
+        goto out;
+    }
+
+    for (i = 0; i < b_info->num_vnuma_nodes; i++) {
+        uint32_t pnode;
+
+        v = &b_info->vnuma_nodes[i];
+        pnode = v->pnode;
+
+        /* The pnode specified is not valid? */
+        if (pnode >= nr_nodes) {
+            LOG(ERROR, "Invalid pnode %"PRIu32" specified", pnode);
+            goto out;
+        }
+
+        total_memkb += v->memkb;
+    }
+
+    if (total_memkb != b_info->max_memkb) {
+        LOG(ERROR, "Amount of memory mismatch (0x%"PRIx64" != 0x%"PRIx64")",
+            total_memkb, b_info->max_memkb);
+        goto out;
+    }
+
+    /* Check vcpu mapping */
+    libxl_cpu_bitmap_alloc(CTX, &cpumap, b_info->max_vcpus);
+    for (i = 0; i < b_info->num_vnuma_nodes; i++) {
+        v = &b_info->vnuma_nodes[i];
+        libxl_for_each_set_bit(j, v->vcpus) {
+            if (!libxl_bitmap_test(&cpumap, j))
+                libxl_bitmap_set(&cpumap, j);
+            else {
+                LOG(ERROR, "Vcpu %d assigned more than once", j);
+                goto out;
+            }
+        }
+    }
+
+    for (i = 0; i < b_info->max_vcpus; i++) {
+        if (!libxl_bitmap_test(&cpumap, i)) {
+            LOG(ERROR, "Vcpu %d is not assigned to any vnode", i);
+            goto out;
+        }
+    }
+
+    /* Check vmemranges */
+    qsort(state->vmemranges, state->num_vmemranges, sizeof(xen_vmemrange_t),
+          compare_vmemrange);
+
+    for (i = 0; i < state->num_vmemranges; i++) {
+        if (state->vmemranges[i].end < state->vmemranges[i].start) {
+                LOG(ERROR, "Vmemrange end < start");
+                goto out;
+        }
+    }
+
+    for (i = 0; i < state->num_vmemranges - 1; i++) {
+        if (state->vmemranges[i].end > state->vmemranges[i+1].start) {
+            LOG(ERROR,
+                "Vmemranges overlapped, 0x%"PRIx64"-0x%"PRIx64", 0x%"PRIx64"-0x%"PRIx64,
+                state->vmemranges[i].start, state->vmemranges[i].end,
+                state->vmemranges[i+1].start, state->vmemranges[i+1].end);
+            goto out;
+        }
+    }
+
+    /* Check vdistances */
+    for (i = 0; i < b_info->num_vnuma_nodes; i++) {
+        uint32_t local_distance, remote_distance;
+
+        v = &b_info->vnuma_nodes[i];
+        local_distance = v->distances[i];
+
+        for (j = 0; j < v->num_distances; j++) {
+            if (i == j) continue;
+            remote_distance = v->distances[j];
+            if (local_distance > remote_distance) {
+                LOG(ERROR,
+                    "Distance from %u to %u smaller than %u's local distance",
+                    i, j, i);
+                goto out;
+            }
+        }
+    }
+
+    rc = 0;
+out:
+    libxl_numainfo_list_free(ninfo, nr_nodes);
+    libxl_bitmap_dispose(&cpumap);
+    return rc;
+}
+
+/*
+ * Local variables:
+ * mode: C
+ * c-basic-offset: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
-- 
1.9.1

  parent reply	other threads:[~2015-03-16  9:52 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-16  9:52 [PATCH v8 00/21] Virtual NUMA for PV and HVM Wei Liu
2015-03-16  9:52 ` [PATCH v8 01/21] xen: make two memory hypercalls vNUMA-aware Wei Liu
2015-03-16  9:52 ` [PATCH v8 02/21] libxc: duplicate snippet to allocate p2m_host array Wei Liu
2015-03-16  9:52 ` [PATCH v8 03/21] libxc: add p2m_size to xc_dom_image Wei Liu
2015-03-16  9:52 ` [PATCH v8 04/21] libxc: allocate memory with vNUMA information for PV guest Wei Liu
2015-03-16  9:52 ` [PATCH v8 05/21] libxl: introduce vNUMA types Wei Liu
2015-03-16  9:52 ` [PATCH v8 06/21] libxl: add vmemrange to libxl__domain_build_state Wei Liu
2015-03-16  9:52 ` Wei Liu [this message]
2015-03-16  9:52 ` [PATCH v8 08/21] libxl: x86: factor out e820_host_sanitize Wei Liu
2015-03-16  9:52 ` [PATCH v8 09/21] libxl: functions to build vmemranges for PV guest Wei Liu
2015-03-16  9:52 ` [PATCH v8 10/21] libxl: build, check and pass vNUMA info to Xen " Wei Liu
2015-03-16  9:52 ` [PATCH v8 11/21] libxc: indentation change to xc_hvm_build_x86.c Wei Liu
2015-03-16  9:52 ` [PATCH v8 12/21] libxc: allocate memory with vNUMA information for HVM guest Wei Liu
2015-03-16  9:52 ` [PATCH v8 13/21] libxl: build, check and pass vNUMA info to Xen " Wei Liu
2015-03-16  9:52 ` [PATCH v8 14/21] libxl: disallow memory relocation when vNUMA is enabled Wei Liu
2015-03-16  9:52 ` [PATCH v8 15/21] libxl: define LIBXL_HAVE_VNUMA Wei Liu
2015-03-16  9:52 ` [PATCH v8 16/21] libxlu: rework internal representation of setting Wei Liu
2015-03-16  9:52 ` [PATCH v8 17/21] libxlu: nested list support Wei Liu
2015-03-16  9:52 ` [PATCH v8 18/21] libxlu: record location when parsing values Wei Liu
2015-03-18 11:49   ` Ian Campbell
2015-03-16  9:52 ` [PATCH v8 19/21] libxlu: introduce new APIs Wei Liu
2015-03-16  9:52 ` [PATCH v8 20/21] xl: introduce xcalloc Wei Liu
2015-03-16  9:52 ` [PATCH v8 21/21] xl: vNUMA support Wei Liu
2015-03-18 11:49   ` Ian Campbell
2015-03-18 12:31 ` [PATCH v8 00/21] Virtual NUMA for PV and HVM Ian Campbell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1426499560-28514-8-git-send-email-wei.liu2@citrix.com \
    --to=wei.liu2@citrix.com \
    --cc=dario.faggioli@citrix.com \
    --cc=ian.campbell@citrix.com \
    --cc=ian.jackson@eu.citrix.com \
    --cc=ufimtseva@gmail.com \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox