From: Ed White <edmund.h.white@intel.com>
To: xen-devel@lists.xen.org
Cc: Ravi Sahita <ravi.sahita@intel.com>,
Wei Liu <wei.liu2@citrix.com>,
George Dunlap <george.dunlap@eu.citrix.com>,
Ian Jackson <ian.jackson@eu.citrix.com>, Tim Deegan <tim@xen.org>,
Ed White <edmund.h.white@intel.com>,
Jan Beulich <jbeulich@suse.com>,
Andrew Cooper <andrew.cooper3@citrix.com>,
tlengyel@novetta.com, Daniel De Graaf <dgdegra@tycho.nsa.gov>
Subject: [PATCH v3 08/13] x86/altp2m: add control of suppress_ve.
Date: Wed, 1 Jul 2015 11:09:32 -0700 [thread overview]
Message-ID: <1435774177-6345-9-git-send-email-edmund.h.white@intel.com> (raw)
In-Reply-To: <1435774177-6345-1-git-send-email-edmund.h.white@intel.com>
The existing ept_set_entry() and ept_get_entry() routines are extended
to optionally set/get suppress_ve and renamed. New ept_set_entry() and
ept_get_entry() routines are provided as wrappers, where set preserves
suppress_ve for an existing entry and sets it for a new entry.
Additional function pointers are added to p2m_domain to allow direct
access to the extended routines.
Signed-off-by: Ed White <edmund.h.white@intel.com>
---
xen/arch/x86/mm/p2m-ept.c | 40 +++++++++++++++++++++++++++++++++-------
xen/include/asm-x86/p2m.h | 13 +++++++++++++
2 files changed, 46 insertions(+), 7 deletions(-)
diff --git a/xen/arch/x86/mm/p2m-ept.c b/xen/arch/x86/mm/p2m-ept.c
index 4111795..bcb9381 100644
--- a/xen/arch/x86/mm/p2m-ept.c
+++ b/xen/arch/x86/mm/p2m-ept.c
@@ -650,14 +650,15 @@ bool_t ept_handle_misconfig(uint64_t gpa)
}
/*
- * ept_set_entry() computes 'need_modify_vtd_table' for itself,
+ * _ept_set_entry() computes 'need_modify_vtd_table' for itself,
* by observing whether any gfn->mfn translations are modified.
*
* Returns: 0 for success, -errno for failure
*/
static int
-ept_set_entry(struct p2m_domain *p2m, unsigned long gfn, mfn_t mfn,
- unsigned int order, p2m_type_t p2mt, p2m_access_t p2ma)
+_ept_set_entry(struct p2m_domain *p2m, unsigned long gfn, mfn_t mfn,
+ unsigned int order, p2m_type_t p2mt, p2m_access_t p2ma,
+ int sve)
{
ept_entry_t *table, *ept_entry = NULL;
unsigned long gfn_remainder = gfn;
@@ -803,7 +804,11 @@ ept_set_entry(struct p2m_domain *p2m, unsigned long gfn, mfn_t mfn,
ept_p2m_type_to_flags(p2m, &new_entry, p2mt, p2ma);
}
- new_entry.suppress_ve = 1;
+ if ( sve != -1 )
+ new_entry.suppress_ve = !!sve;
+ else
+ new_entry.suppress_ve = is_epte_valid(&old_entry) ?
+ old_entry.suppress_ve : 1;
rc = atomic_write_ept_entry(ept_entry, new_entry, target);
if ( unlikely(rc) )
@@ -848,10 +853,18 @@ out:
return rc;
}
+static int
+ept_set_entry(struct p2m_domain *p2m, unsigned long gfn, mfn_t mfn,
+ unsigned int order, p2m_type_t p2mt, p2m_access_t p2ma)
+{
+ return _ept_set_entry(p2m, gfn, mfn, order, p2mt, p2ma, -1);
+}
+
/* Read ept p2m entries */
-static mfn_t ept_get_entry(struct p2m_domain *p2m,
- unsigned long gfn, p2m_type_t *t, p2m_access_t* a,
- p2m_query_t q, unsigned int *page_order)
+static mfn_t _ept_get_entry(struct p2m_domain *p2m,
+ unsigned long gfn, p2m_type_t *t, p2m_access_t* a,
+ p2m_query_t q, unsigned int *page_order,
+ bool_t *sve)
{
ept_entry_t *table = map_domain_page(pagetable_get_pfn(p2m_get_pagetable(p2m)));
unsigned long gfn_remainder = gfn;
@@ -865,6 +878,8 @@ static mfn_t ept_get_entry(struct p2m_domain *p2m,
*t = p2m_mmio_dm;
*a = p2m_access_n;
+ if ( sve )
+ *sve = 1;
/* This pfn is higher than the highest the p2m map currently holds */
if ( gfn > p2m->max_mapped_pfn )
@@ -930,6 +945,8 @@ static mfn_t ept_get_entry(struct p2m_domain *p2m,
else
*t = ept_entry->sa_p2mt;
*a = ept_entry->access;
+ if ( sve )
+ *sve = ept_entry->suppress_ve;
mfn = _mfn(ept_entry->mfn);
if ( i )
@@ -953,6 +970,13 @@ out:
return mfn;
}
+static mfn_t ept_get_entry(struct p2m_domain *p2m,
+ unsigned long gfn, p2m_type_t *t, p2m_access_t* a,
+ p2m_query_t q, unsigned int *page_order)
+{
+ return _ept_get_entry(p2m, gfn, t, a, q, page_order, NULL);
+}
+
void ept_walk_table(struct domain *d, unsigned long gfn)
{
struct p2m_domain *p2m = p2m_get_hostp2m(d);
@@ -1131,6 +1155,8 @@ int ept_p2m_init(struct p2m_domain *p2m)
p2m->set_entry = ept_set_entry;
p2m->get_entry = ept_get_entry;
+ p2m->set_entry_full = _ept_set_entry;
+ p2m->get_entry_full = _ept_get_entry;
p2m->change_entry_type_global = ept_change_entry_type_global;
p2m->change_entry_type_range = ept_change_entry_type_range;
p2m->memory_type_changed = ept_memory_type_changed;
diff --git a/xen/include/asm-x86/p2m.h b/xen/include/asm-x86/p2m.h
index 079a298..bf5e5cb 100644
--- a/xen/include/asm-x86/p2m.h
+++ b/xen/include/asm-x86/p2m.h
@@ -237,6 +237,19 @@ struct p2m_domain {
p2m_access_t *p2ma,
p2m_query_t q,
unsigned int *page_order);
+ int (*set_entry_full)(struct p2m_domain *p2m,
+ unsigned long gfn,
+ mfn_t mfn, unsigned int page_order,
+ p2m_type_t p2mt,
+ p2m_access_t p2ma,
+ int sve);
+ mfn_t (*get_entry_full)(struct p2m_domain *p2m,
+ unsigned long gfn,
+ p2m_type_t *p2mt,
+ p2m_access_t *p2ma,
+ p2m_query_t q,
+ unsigned int *page_order,
+ bool_t *sve);
void (*enable_hardware_log_dirty)(struct p2m_domain *p2m);
void (*disable_hardware_log_dirty)(struct p2m_domain *p2m);
void (*flush_hardware_cached_dirty)(struct p2m_domain *p2m);
--
1.9.1
next prev parent reply other threads:[~2015-07-01 18:09 UTC|newest]
Thread overview: 91+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-01 18:09 [PATCH v3 00/12] Alternate p2m: support multiple copies of host p2m Ed White
2015-07-01 18:09 ` [PATCH v3 01/13] common/domain: Helpers to pause a domain while in context Ed White
2015-07-01 18:09 ` [PATCH v3 02/13] VMX: VMFUNC and #VE definitions and detection Ed White
2015-07-06 17:16 ` George Dunlap
2015-07-07 18:58 ` Nakajima, Jun
2015-07-01 18:09 ` [PATCH v3 03/13] VMX: implement suppress #VE Ed White
2015-07-06 17:26 ` George Dunlap
2015-07-07 18:59 ` Nakajima, Jun
2015-07-09 13:01 ` Jan Beulich
2015-07-10 19:30 ` Sahita, Ravi
2015-07-13 7:40 ` Jan Beulich
2015-07-13 23:39 ` Sahita, Ravi
2015-07-14 11:18 ` George Dunlap
2015-07-01 18:09 ` [PATCH v3 04/13] x86/HVM: Hardware alternate p2m support detection Ed White
2015-07-01 18:09 ` [PATCH v3 05/13] x86/altp2m: basic data structures and support routines Ed White
2015-07-03 16:22 ` Andrew Cooper
2015-07-06 9:56 ` Jan Beulich
2015-07-06 16:52 ` Ed White
2015-07-06 16:40 ` Ed White
2015-07-06 16:50 ` Ian Jackson
2015-07-07 6:48 ` Coding style (was Re: [PATCH v3 05/13] x86/altp2m: basic data structures and support routines.) Jan Beulich
2015-07-07 6:31 ` [PATCH v3 05/13] x86/altp2m: basic data structures and support routines Jan Beulich
2015-07-07 15:04 ` George Dunlap
2015-07-07 15:22 ` Tim Deegan
2015-07-07 16:19 ` Ed White
2015-07-08 13:52 ` George Dunlap
2015-07-09 17:05 ` Sahita, Ravi
2015-07-10 16:35 ` George Dunlap
2015-07-10 22:11 ` Sahita, Ravi
2015-07-09 13:29 ` Jan Beulich
2015-07-10 21:48 ` Sahita, Ravi
2015-07-13 8:01 ` Jan Beulich
2015-07-14 0:01 ` Sahita, Ravi
2015-07-14 8:53 ` Jan Beulich
2015-07-16 8:48 ` Sahita, Ravi
2015-07-16 9:02 ` Jan Beulich
2015-07-17 22:39 ` Sahita, Ravi
2015-07-20 6:18 ` Jan Beulich
2015-07-21 5:04 ` Sahita, Ravi
2015-07-21 6:24 ` Jan Beulich
2015-07-14 11:34 ` George Dunlap
2015-07-09 15:58 ` George Dunlap
2015-07-01 18:09 ` [PATCH v3 06/13] VMX/altp2m: add code to support EPTP switching and #VE Ed White
2015-07-03 16:29 ` Andrew Cooper
2015-07-07 14:28 ` Wei Liu
2015-07-07 19:02 ` Nakajima, Jun
2015-07-01 18:09 ` [PATCH v3 07/13] VMX: add VMFUNC leaf 0 (EPTP switching) to emulator Ed White
2015-07-03 16:40 ` Andrew Cooper
2015-07-06 19:56 ` Sahita, Ravi
2015-07-07 7:31 ` Jan Beulich
2015-07-09 14:05 ` Jan Beulich
2015-07-01 18:09 ` Ed White [this message]
2015-07-03 16:43 ` [PATCH v3 08/13] x86/altp2m: add control of suppress_ve Andrew Cooper
2015-07-01 18:09 ` [PATCH v3 09/13] x86/altp2m: alternate p2m memory events Ed White
2015-07-01 18:29 ` Lengyel, Tamas
2015-07-03 16:46 ` Andrew Cooper
2015-07-07 15:18 ` George Dunlap
2015-07-01 18:09 ` [PATCH v3 10/13] x86/altp2m: add remaining support routines Ed White
2015-07-03 16:56 ` Andrew Cooper
2015-07-09 15:07 ` George Dunlap
2015-07-01 18:09 ` [PATCH v3 11/13] x86/altp2m: define and implement alternate p2m HVMOP types Ed White
2015-07-06 10:09 ` Andrew Cooper
2015-07-06 16:49 ` Ed White
2015-07-06 17:08 ` Ian Jackson
2015-07-06 18:27 ` Ed White
2015-07-06 23:40 ` Lengyel, Tamas
2015-07-07 7:46 ` Jan Beulich
2015-07-07 7:41 ` Jan Beulich
2015-07-07 7:39 ` Jan Beulich
2015-07-07 7:33 ` Jan Beulich
2015-07-07 20:10 ` Sahita, Ravi
2015-07-07 20:25 ` Andrew Cooper
2015-07-09 14:34 ` Jan Beulich
2015-07-01 18:09 ` [PATCH v3 12/13] x86/altp2m: Add altp2mhvm HVM domain parameter Ed White
2015-07-06 10:16 ` Andrew Cooper
2015-07-06 17:49 ` Wei Liu
2015-07-06 18:01 ` Ed White
2015-07-06 18:18 ` Wei Liu
2015-07-06 22:59 ` Ed White
2015-07-01 18:09 ` [PATCH v3 13/13] x86/altp2m: XSM hooks for altp2m HVM ops Ed White
2015-07-02 19:17 ` Daniel De Graaf
2015-07-06 9:50 ` [PATCH v3 00/12] Alternate p2m: support multiple copies of host p2m Jan Beulich
2015-07-06 11:25 ` Tim Deegan
2015-07-06 11:38 ` Jan Beulich
2015-07-08 18:35 ` Sahita, Ravi
2015-07-09 11:49 ` Wei Liu
2015-07-09 14:14 ` Jan Beulich
2015-07-09 16:13 ` Sahita, Ravi
2015-07-09 16:20 ` Ian Campbell
2015-07-09 16:21 ` Wei Liu
2015-07-09 16:42 ` George Dunlap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1435774177-6345-9-git-send-email-edmund.h.white@intel.com \
--to=edmund.h.white@intel.com \
--cc=andrew.cooper3@citrix.com \
--cc=dgdegra@tycho.nsa.gov \
--cc=george.dunlap@eu.citrix.com \
--cc=ian.jackson@eu.citrix.com \
--cc=jbeulich@suse.com \
--cc=ravi.sahita@intel.com \
--cc=tim@xen.org \
--cc=tlengyel@novetta.com \
--cc=wei.liu2@citrix.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).