From: Roger Pau Monne <roger.pau@citrix.com>
To: xen-devel@lists.xenproject.org
Subject: [PATCH v5 00/28] Introduce HVM without dm and new boot ABI
Date: Fri, 21 Aug 2015 18:53:13 +0200 [thread overview]
Message-ID: <1440176021-18910-1-git-send-email-roger.pau@citrix.com> (raw)
This series is split in the following order:
- Patches from 1 to 10 switch HVM domain contruction to use the xc_dom_*
family of functions, like they are used to build PV domains. This batch
of patches can go in regardless of the status of the rest of the series
IMHO, and in fact would help me quite a lot with the rebasing.
- Patches from 11 to 21 allow disabling the devices emulated inside of Xen.
- Patches from 21 to 28 introduce the creation of HVM guests without a
device model and without the devices emulated inside of Xen.
This series has been successfully tested on the following hardware:
- Intel Xeon W3550.
- AMD Opteron 4184.
With both hap=0 and hap=1 in the configuration file. I've been able to boot
a SMP guest in this mode with a virtual hard drive and a virtual network
card, all working fine AFAICT.
For this round only maintainers of the specific code being modified have
been Cced on the patches.
The series can also be found in the following git repo:
git://xenbits.xen.org/people/royger/xen.git branch hvm_without_dm_v5
And for the FreeBSD part:
git://xenbits.xen.org/people/royger/freebsd.git branch new_entry_point_v4
In case someone wants to give it a try, I've uploaded a FreeBSD kernel that
should work when booted into this mode:
https://people.freebsd.org/~royger/kernel_no_dm
This FreeBSD kernel starts the APs in long mode. There are examples for
starting the APs in other modes in the sys/x86/xen/pv.c file.
The config file that I've used is:
<config>
kernel="/path/to/kernel_no_dm"
builder="hvm"
device_model_version="none"
memory=128
vcpus=2
name = "freebsd"
</config>
Of course if you have a FreeBSD disk already setup it can also be added to
the configuration file, and the following line can be used to point FreeBSD
to the disk:
extra="vfs.root.mountfrom=ufs:/dev/ufsid/<disk_id>"
AW 01/28 libxc: split x86 HVM setup_guest into smaller
AW 02/28 libxc: unify xc_dom_p2m_{host/guest}
AW 03/28 libxc: introduce the notion of a container type
AW 04/28 libxc: introduce a domain loader for HVM guest
AW 05/28 libxc: make arch_setup_meminit a xc_dom_arch hook
AW 06/28 libxc: make arch_setup_boot{init/late} xc_dom_arch
A 07/28 libxc: rework BSP initialization
A M 08/28 libxc: introduce a xc_dom_arch for hvm-3.0-x86_32
W 09/28 libxl: switch HVM domain building to use xc_dom_*
AW 10/28 libxc: remove dead HVM building code
A M 11/28 xen/x86: add bitmap of enabled emulated devices
A M 12/28 xen/x86: allow disabling the emulated local apic
A 13/28 xen/x86: allow disabling the emulated HPET
A 14/28 xen/x86: allow disabling the pmtimer
A 15/28 xen/x86: allow disabling the emulated RTC
A 16/28 xen/x86: allow disabling the emulated IO APIC
A 17/28 xen/x86: allow disabling the emulated PIC
A 18/28 xen/x86: allow disabling the emulated pmu
A 19/28 xen/x86: allow disabling the emulated VGA
A 20/28 xen/x86: allow disabling the emulated IOMMU
21/28 xen/x86: allow disabling all emulated devices inside
AW 22/28 elfnotes: intorduce a new PHYS_ENTRY elfnote
W M 23/28 libxc: allow creating domains without emulated
M 24/28 xen/x86: allow HVM guests to use hypercalls to bring
W 25/28 xenconsole: try to attach to PV console if HVM fails
N 26/28 libxc/xen: introduce a start info structure for
A 27/28 libxc: switch xc_dom_elfloader to be used with
M 28/28 libxl: allow the creation of HVM domains without a
A = Acked/Reviewed by Andrew Cooper.
W = Acked/Reviewed by Wei Liu.
N = New in this version.
M = Modified in this version.
Thanks, Roger.
next reply other threads:[~2015-08-21 16:53 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-21 16:53 Roger Pau Monne [this message]
2015-08-21 16:53 ` [PATCH v5 01/28] libxc: split x86 HVM setup_guest into smaller logical functions Roger Pau Monne
2015-08-21 16:53 ` [PATCH v5 02/28] libxc: unify xc_dom_p2m_{host/guest} Roger Pau Monne
2015-08-21 16:53 ` [PATCH v5 03/28] libxc: introduce the notion of a container type Roger Pau Monne
2015-08-21 16:53 ` [PATCH v5 04/28] libxc: introduce a domain loader for HVM guest firmware Roger Pau Monne
2015-08-21 16:53 ` [PATCH v5 05/28] libxc: make arch_setup_meminit a xc_dom_arch hook Roger Pau Monne
2015-08-21 16:53 ` [PATCH v5 06/28] libxc: make arch_setup_boot{init/late} xc_dom_arch hooks Roger Pau Monne
2015-08-21 16:53 ` [PATCH v5 07/28] libxc: rework BSP initialization Roger Pau Monne
2015-08-24 18:26 ` Konrad Rzeszutek Wilk
2015-08-25 8:33 ` Roger Pau Monné
2015-08-25 9:02 ` Wei Liu
2015-08-25 9:22 ` Roger Pau Monné
2015-08-25 9:32 ` Wei Liu
2015-08-25 9:35 ` Andrew Cooper
2015-08-21 16:53 ` [PATCH v5 08/28] libxc: introduce a xc_dom_arch for hvm-3.0-x86_32 guests Roger Pau Monne
2015-08-25 9:17 ` Wei Liu
2015-08-21 16:53 ` [PATCH v5 09/28] libxl: switch HVM domain building to use xc_dom_* helpers Roger Pau Monne
2015-08-21 16:53 ` [PATCH v5 10/28] libxc: remove dead HVM building code Roger Pau Monne
2015-08-21 16:53 ` [PATCH v5 11/28] xen/x86: add bitmap of enabled emulated devices Roger Pau Monne
2015-08-21 16:53 ` [PATCH v5 12/28] xen/x86: allow disabling the emulated local apic Roger Pau Monne
2015-08-31 21:55 ` Boris Ostrovsky
2015-08-21 16:53 ` [PATCH v5 13/28] xen/x86: allow disabling the emulated HPET Roger Pau Monne
2015-08-21 16:53 ` [PATCH v5 14/28] xen/x86: allow disabling the pmtimer Roger Pau Monne
2015-08-21 16:53 ` [PATCH v5 15/28] xen/x86: allow disabling the emulated RTC Roger Pau Monne
2015-08-21 16:53 ` [PATCH v5 16/28] xen/x86: allow disabling the emulated IO APIC Roger Pau Monne
2015-08-21 16:53 ` [PATCH v5 17/28] xen/x86: allow disabling the emulated PIC Roger Pau Monne
2015-08-21 16:53 ` [PATCH v5 18/28] xen/x86: allow disabling the emulated pmu Roger Pau Monne
2015-08-21 16:53 ` [PATCH v5 19/28] xen/x86: allow disabling the emulated VGA Roger Pau Monne
2015-08-21 16:53 ` [PATCH v5 20/28] xen/x86: allow disabling the emulated IOMMU Roger Pau Monne
2015-08-21 16:53 ` [PATCH v5 21/28] xen/x86: allow disabling all emulated devices inside of Xen Roger Pau Monne
2015-08-21 17:19 ` Andrew Cooper
2015-08-21 16:53 ` [PATCH v5 22/28] elfnotes: intorduce a new PHYS_ENTRY elfnote Roger Pau Monne
2015-08-21 16:53 ` [PATCH v5 23/28] libxc: allow creating domains without emulated devices Roger Pau Monne
2015-08-21 17:42 ` Andrew Cooper
2015-08-21 16:53 ` [PATCH v5 24/28] xen/x86: allow HVM guests to use hypercalls to bring up vCPUs Roger Pau Monne
2015-08-21 20:36 ` Andrew Cooper
2015-08-24 10:43 ` Roger Pau Monné
2015-08-24 11:57 ` Andrew Cooper
2015-08-21 16:53 ` [PATCH v5 25/28] xenconsole: try to attach to PV console if HVM fails Roger Pau Monne
2015-08-21 16:53 ` [PATCH v5 26/28] libxc/xen: introduce a start info structure for HVMlite guests Roger Pau Monne
2015-08-21 21:00 ` Andrew Cooper
2015-08-24 15:24 ` Roger Pau Monné
2015-08-21 16:53 ` [PATCH v5 27/28] libxc: switch xc_dom_elfloader to be used with HVMlite domains Roger Pau Monne
2015-08-25 9:32 ` Wei Liu
2015-08-21 16:53 ` [PATCH v5 28/28] libxl: allow the creation of HVM domains without a device model Roger Pau Monne
2015-08-25 9:30 ` Wei Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1440176021-18910-1-git-send-email-roger.pau@citrix.com \
--to=roger.pau@citrix.com \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).