From: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
To: peter.maydell@linaro.org
Cc: xen-devel@lists.xensource.com, qemu-devel@nongnu.org,
Don Slutz <dslutz@verizon.com>,
Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Subject: [PULL 01/29] xen-hvm: Add trace to ioreq
Date: Thu, 10 Sep 2015 18:15:33 +0100 [thread overview]
Message-ID: <1441905361-31967-1-git-send-email-stefano.stabellini@eu.citrix.com> (raw)
In-Reply-To: <alpine.DEB.2.02.1509101751470.2672@kaball.uk.xensource.com>
From: Don Slutz <dslutz@verizon.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Don Slutz <dslutz@verizon.com>
---
trace-events | 7 +++++++
xen-hvm.c | 21 +++++++++++++++++++++
2 files changed, 28 insertions(+)
diff --git a/trace-events b/trace-events
index 0a82f0c..985b041 100644
--- a/trace-events
+++ b/trace-events
@@ -936,6 +936,13 @@ xen_map_portio_range(uint32_t id, uint64_t start_addr, uint64_t end_addr) "id: %
xen_unmap_portio_range(uint32_t id, uint64_t start_addr, uint64_t end_addr) "id: %u start: %#"PRIx64" end: %#"PRIx64
xen_map_pcidev(uint32_t id, uint8_t bus, uint8_t dev, uint8_t func) "id: %u bdf: %02x.%02x.%02x"
xen_unmap_pcidev(uint32_t id, uint8_t bus, uint8_t dev, uint8_t func) "id: %u bdf: %02x.%02x.%02x"
+handle_ioreq(void *req, uint32_t type, uint32_t dir, uint32_t df, uint32_t data_is_ptr, uint64_t addr, uint64_t data, uint32_t count, uint32_t size) "I/O=%p type=%d dir=%d df=%d ptr=%d port=%#"PRIx64" data=%#"PRIx64" count=%d size=%d"
+handle_ioreq_read(void *req, uint32_t type, uint32_t df, uint32_t data_is_ptr, uint64_t addr, uint64_t data, uint32_t count, uint32_t size) "I/O=%p read type=%d df=%d ptr=%d port=%#"PRIx64" data=%#"PRIx64" count=%d size=%d"
+handle_ioreq_write(void *req, uint32_t type, uint32_t df, uint32_t data_is_ptr, uint64_t addr, uint64_t data, uint32_t count, uint32_t size) "I/O=%p write type=%d df=%d ptr=%d port=%#"PRIx64" data=%#"PRIx64" count=%d size=%d"
+cpu_ioreq_pio(void *req, uint32_t dir, uint32_t df, uint32_t data_is_ptr, uint64_t addr, uint64_t data, uint32_t count, uint32_t size) "I/O=%p pio dir=%d df=%d ptr=%d port=%#"PRIx64" data=%#"PRIx64" count=%d size=%d"
+cpu_ioreq_pio_read_reg(void *req, uint64_t data, uint64_t addr, uint32_t size) "I/O=%p pio read reg data=%#"PRIx64" port=%#"PRIx64" size=%d"
+cpu_ioreq_pio_write_reg(void *req, uint64_t data, uint64_t addr, uint32_t size) "I/O=%p pio write reg data=%#"PRIx64" port=%#"PRIx64" size=%d"
+cpu_ioreq_move(void *req, uint32_t dir, uint32_t df, uint32_t data_is_ptr, uint64_t addr, uint64_t data, uint32_t count, uint32_t size) "I/O=%p copy dir=%d df=%d ptr=%d port=%#"PRIx64" data=%#"PRIx64" count=%d size=%d"
# xen-mapcache.c
xen_map_cache(uint64_t phys_addr) "want %#"PRIx64
diff --git a/xen-hvm.c b/xen-hvm.c
index 0408462..d17d3f3 100644
--- a/xen-hvm.c
+++ b/xen-hvm.c
@@ -814,9 +814,14 @@ static void cpu_ioreq_pio(ioreq_t *req)
{
uint32_t i;
+ trace_cpu_ioreq_pio(req, req->dir, req->df, req->data_is_ptr, req->addr,
+ req->data, req->count, req->size);
+
if (req->dir == IOREQ_READ) {
if (!req->data_is_ptr) {
req->data = do_inp(req->addr, req->size);
+ trace_cpu_ioreq_pio_read_reg(req, req->data, req->addr,
+ req->size);
} else {
uint32_t tmp;
@@ -827,6 +832,8 @@ static void cpu_ioreq_pio(ioreq_t *req)
}
} else if (req->dir == IOREQ_WRITE) {
if (!req->data_is_ptr) {
+ trace_cpu_ioreq_pio_write_reg(req, req->data, req->addr,
+ req->size);
do_outp(req->addr, req->size, req->data);
} else {
for (i = 0; i < req->count; i++) {
@@ -843,6 +850,9 @@ static void cpu_ioreq_move(ioreq_t *req)
{
uint32_t i;
+ trace_cpu_ioreq_move(req, req->dir, req->df, req->data_is_ptr, req->addr,
+ req->data, req->count, req->size);
+
if (!req->data_is_ptr) {
if (req->dir == IOREQ_READ) {
for (i = 0; i < req->count; i++) {
@@ -915,11 +925,18 @@ static void handle_vmport_ioreq(XenIOState *state, ioreq_t *req)
static void handle_ioreq(XenIOState *state, ioreq_t *req)
{
+ trace_handle_ioreq(req, req->type, req->dir, req->df, req->data_is_ptr,
+ req->addr, req->data, req->count, req->size);
+
if (!req->data_is_ptr && (req->dir == IOREQ_WRITE) &&
(req->size < sizeof (target_ulong))) {
req->data &= ((target_ulong) 1 << (8 * req->size)) - 1;
}
+ if (req->dir == IOREQ_WRITE)
+ trace_handle_ioreq_write(req, req->type, req->df, req->data_is_ptr,
+ req->addr, req->data, req->count, req->size);
+
switch (req->type) {
case IOREQ_TYPE_PIO:
cpu_ioreq_pio(req);
@@ -959,6 +976,10 @@ static void handle_ioreq(XenIOState *state, ioreq_t *req)
default:
hw_error("Invalid ioreq type 0x%x\n", req->type);
}
+ if (req->dir == IOREQ_READ) {
+ trace_handle_ioreq_read(req, req->type, req->df, req->data_is_ptr,
+ req->addr, req->data, req->count, req->size);
+ }
}
static int handle_buffered_iopage(XenIOState *state)
--
1.7.10.4
next prev parent reply other threads:[~2015-09-10 17:15 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-10 17:15 [PULL 00/29] xen-2015-09-10-tag Stefano Stabellini
2015-09-10 17:15 ` Stefano Stabellini [this message]
2015-09-10 17:15 ` [PULL 02/29] i440fx: make types configurable at run-time Stefano Stabellini
2015-09-10 17:15 ` [PULL 03/29] pc_init1: pass parameters just with types Stefano Stabellini
2015-09-10 17:15 ` [PULL 04/29] piix: create host bridge to passthrough Stefano Stabellini
2015-09-10 17:15 ` [PULL 05/29] hw/pci-assign: split pci-assign.c Stefano Stabellini
2015-09-10 17:15 ` [PULL 06/29] xen, gfx passthrough: basic graphics passthrough support Stefano Stabellini
2015-09-10 17:15 ` [PULL 07/29] xen, gfx passthrough: retrieve VGA BIOS to work Stefano Stabellini
2015-09-10 17:15 ` [PULL 08/29] igd gfx passthrough: create a isa bridge Stefano Stabellini
2015-09-10 17:15 ` [PULL 09/29] xen, gfx passthrough: register " Stefano Stabellini
2015-09-10 17:15 ` [PULL 10/29] xen, gfx passthrough: register host bridge specific to passthrough Stefano Stabellini
2015-09-10 17:15 ` [PULL 11/29] xen, gfx passthrough: add opregion mapping Stefano Stabellini
2015-09-10 17:15 ` [PULL 12/29] xen-hvm: When using xc_domain_add_to_physmap also include errno when reporting Stefano Stabellini
2015-09-10 17:15 ` [PULL 13/29] xen/HVM: atomically access pointers in bufioreq handling Stefano Stabellini
2015-09-10 17:15 ` [PULL 14/29] xen/pt: Update comments with proper function name Stefano Stabellini
2015-09-10 17:15 ` [PULL 15/29] xen/pt: Make xen_pt_msi_set_enable static Stefano Stabellini
2015-09-10 17:15 ` [PULL 16/29] xen/pt: xen_host_pci_config_read returns -errno, not -1 on failure Stefano Stabellini
2015-09-10 17:15 ` [PULL 17/29] xen: use errno instead of rc for xc_domain_add_to_physmap Stefano Stabellini
2015-09-10 17:15 ` [PULL 18/29] xen/pt/msi: Add the register value when printing logging and error messages Stefano Stabellini
2015-09-10 17:15 ` [PULL 19/29] xen/pt: Use XEN_PT_LOG properly to guard against compiler warnings Stefano Stabellini
2015-09-10 17:15 ` [PULL 20/29] xen/pt: Use xen_host_pci_get_[byte|word] instead of dev.config Stefano Stabellini
2015-09-10 17:15 ` [PULL 21/29] xen/pt: Sync up the dev.config and data values Stefano Stabellini
2015-09-14 10:01 ` Paolo Bonzini
2015-09-15 10:07 ` Stefano Stabellini
2015-09-15 13:25 ` Konrad Rzeszutek Wilk
2015-09-15 13:28 ` Stefano Stabellini
2015-09-15 13:32 ` Paolo Bonzini
2015-09-15 13:55 ` Konrad Rzeszutek Wilk
2015-09-10 17:15 ` [PULL 22/29] xen/pt: Check if reg->init function sets the 'data' past the reg->size Stefano Stabellini
2015-09-10 17:15 ` [PULL 23/29] xen/pt: Remove XenPTReg->data field Stefano Stabellini
2015-09-10 17:15 ` [PULL 24/29] xen/pt: Log xen_host_pci_get in two init functions Stefano Stabellini
2015-09-10 17:15 ` [PULL 25/29] xen/pt: Log xen_host_pci_get/set errors in MSI code Stefano Stabellini
2015-09-10 17:15 ` [PULL 26/29] xen/pt: Make xen_pt_unregister_device idempotent Stefano Stabellini
2015-09-10 17:15 ` [PULL 27/29] xen/pt: Move bulk of xen_pt_unregister_device in its own routine Stefano Stabellini
2015-09-10 17:16 ` [PULL 28/29] xen/pt: Check for return values for xen_host_pci_[get|set] in init Stefano Stabellini
2015-09-10 17:16 ` [PULL 29/29] xen/pt: Don't slurp wholesale the PCI configuration registers Stefano Stabellini
2015-09-10 19:02 ` [PULL 00/29] xen-2015-09-10-tag Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1441905361-31967-1-git-send-email-stefano.stabellini@eu.citrix.com \
--to=stefano.stabellini@eu.citrix.com \
--cc=dslutz@verizon.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).