From: Julien Grall <julien.grall@citrix.com>
To: xen-devel@lists.xenproject.org
Cc: Julien Grall <julien.grall@citrix.com>,
ian.campbell@citrix.com, stefano.stabellini@eu.citrix.com
Subject: [PATCH v3 0/9] xen/arm: vgic: Support 32-bit access for 64-bit register
Date: Wed, 7 Oct 2015 15:41:02 +0100 [thread overview]
Message-ID: <1444228871-383-1-git-send-email-julien.grall@citrix.com> (raw)
Hi all,
This series aims to fixc the 32-bit access on 64-bit register. Some guest
OS such as FreeBSD and Linux (only in ITS) use 32-bit access and will crash
at boot time.
I took the opportunity to go further and optimize the way Xen is storing
registers such as GICD_IPRIORITYR, GICD_ITARGETSR and GICD_IROUTER.
For all changes see in each patch.
A branch has been pushed based on the latest staging:
git://xenbits.xen.org/people/julieng/xen-unstable.git branch gicv3-32bit-v2
Julien Grall (9):
xen/arm: io: remove mmio_check_t typedef
xen/arm: io: Extend write/read handler to pass the register in
parameter
xen/arm: io: Support sign-extension for every read access
xen/arm: vgic: ctlr stores a 32-bit hardware register so use uint32_t
xen/arm: vgic: Optimize the way to store GICD_IPRIORITYR in the rank
xen/arm: vgic: Introduce a new field to store the rank index and use
it
xen/arm: vgic: Optimize the way to store the target vCPU in the rank
xen/arm: vgic: Introduce helpers to extract/update/clear/set vGIC
register ...
xen/arm: vgic-v3: Support 32-bit access for 64-bit registers
xen/arch/arm/io.c | 34 ++++-
xen/arch/arm/vgic-v2.c | 308 +++++++++++++++++++------------------
xen/arch/arm/vgic-v3.c | 353 +++++++++++++++++++++++--------------------
xen/arch/arm/vgic.c | 70 +++++++--
xen/arch/arm/vuart.c | 20 ++-
xen/include/asm-arm/domain.h | 2 +-
xen/include/asm-arm/mmio.h | 7 +-
xen/include/asm-arm/vgic.h | 151 ++++++++++++++----
8 files changed, 582 insertions(+), 363 deletions(-)
--
2.1.4
next reply other threads:[~2015-10-07 14:42 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-07 14:41 Julien Grall [this message]
2015-10-07 14:41 ` [PATCH v3 1/9] xen/arm: io: remove mmio_check_t typedef Julien Grall
2015-10-07 14:41 ` [PATCH v3 2/9] xen/arm: io: Extend write/read handler to pass the register in parameter Julien Grall
2015-10-07 14:41 ` [PATCH v3 3/9] xen/arm: io: Support sign-extension for every read access Julien Grall
2015-10-07 14:41 ` [PATCH v3 4/9] xen/arm: vgic: ctlr stores a 32-bit hardware register so use uint32_t Julien Grall
2015-10-07 14:41 ` [PATCH v3 5/9] xen/arm: vgic: Optimize the way to store GICD_IPRIORITYR in the rank Julien Grall
2015-10-07 14:41 ` [PATCH v3 6/9] xen/arm: vgic: Introduce a new field to store the rank index and use it Julien Grall
2015-10-07 14:41 ` [PATCH v3 7/9] xen/arm: vgic: Optimize the way to store the target vCPU in the rank Julien Grall
2015-10-07 15:38 ` Ian Campbell
2015-10-07 15:48 ` Julien Grall
2015-10-07 16:00 ` Ian Campbell
2015-10-07 16:29 ` Julien Grall
2015-10-07 19:13 ` Julien Grall
2015-10-08 9:39 ` Ian Campbell
2015-10-08 10:43 ` Julien Grall
2015-10-07 17:26 ` Stefano Stabellini
2015-10-07 18:16 ` Julien Grall
2015-10-08 10:56 ` Ian Campbell
2015-10-08 11:36 ` Stefano Stabellini
2015-10-08 12:23 ` Ian Campbell
2015-10-08 12:34 ` Stefano Stabellini
2015-10-08 13:46 ` Julien Grall
2015-10-08 14:25 ` Ian Campbell
2015-10-08 18:36 ` Julien Grall
2015-10-09 11:24 ` Julien Grall
2015-10-09 11:38 ` Ian Campbell
2015-10-12 10:41 ` Stefano Stabellini
2015-10-12 11:00 ` Julien Grall
2015-10-12 11:07 ` Stefano Stabellini
2015-10-12 11:28 ` Julien Grall
2015-10-07 14:41 ` [PATCH v3 8/9] xen/arm: vgic: Introduce helpers to extract/update/clear/set vGIC register Julien Grall
2015-10-07 14:41 ` [PATCH v3 9/9] xen/arm: vgic-v3: Support 32-bit access for 64-bit registers Julien Grall
2015-10-08 10:44 ` [PATCH v3 0/9] xen/arm: vgic: Support 32-bit access for 64-bit register Julien Grall
2015-10-08 11:46 ` Ian Campbell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1444228871-383-1-git-send-email-julien.grall@citrix.com \
--to=julien.grall@citrix.com \
--cc=ian.campbell@citrix.com \
--cc=stefano.stabellini@eu.citrix.com \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).