xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Julien Grall <julien.grall@citrix.com>
To: xen-devel@lists.xenproject.org
Cc: Julien Grall <julien.grall@citrix.com>,
	ian.campbell@citrix.com, stefano.stabellini@eu.citrix.com
Subject: [PATCH v3 9/9] xen/arm: vgic-v3: Support 32-bit access for 64-bit registers
Date: Wed, 7 Oct 2015 15:41:11 +0100	[thread overview]
Message-ID: <1444228871-383-10-git-send-email-julien.grall@citrix.com> (raw)
In-Reply-To: <1444228871-383-1-git-send-email-julien.grall@citrix.com>

Based on 8.1.3 (IHI 0069A), unless stated otherwise, the 64-bit registers
supports both 32-bit and 64-bits access.

All the registers we properly emulate (i.e not RAZ/WI) supports 32-bit access.

For RAZ/WI, it's also seems to be the case but I'm not 100% sure. Anyway,
emulating 32-bit access for them doesn't hurt. Note that we would need
some extra care when they will be implemented (for instance GICR_PROPBASER).

Signed-off-by: Julien Grall <julien.grall@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>

---
    This is technically fixing boot of FreeBSD ARM64 guest with GICv3.

    AFAICT, Linux is not using 32-bit access in the GICv3 code expect
    for the ITS (which we don't support yet).

    So this patch is a good candidate for Xen 4.6.1. Although this patch is
    heavily depend on previous patches. It may be possible to shuffle
    and move the "opmitization" patches towards the end. I haven't yet
    done that because I feel this series makes more sense in the current
    order.

    Also, I haven't move vgic_reg64_check_access in vgic.h because there
    is no usage in this series outside of vgic-v3.c and the helpers is
    GICv3 oriented.

    Changes in v2:
        - Add Ian's acked-by

    Changes in v1:
        - Support 32bit access on the most significant word of
        GICR_TYPER
---
 xen/arch/arm/vgic-v3.c | 24 +++++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)

diff --git a/xen/arch/arm/vgic-v3.c b/xen/arch/arm/vgic-v3.c
index a4b8412..e540085 100644
--- a/xen/arch/arm/vgic-v3.c
+++ b/xen/arch/arm/vgic-v3.c
@@ -157,6 +157,15 @@ static void vgic_store_irouter(struct domain *d, struct vgic_irq_rank *rank,
     rank->vcpu[offset] = new_vcpu->vcpu_id;
 }
 
+static inline bool vgic_reg64_check_access(struct hsr_dabt dabt)
+{
+    /*
+     * 64 bits registers can be accessible using 32-bit and 64-bit unless
+     * stated otherwise (See 8.1.3 ARM IHI 0069A).
+     */
+    return ( dabt.size == DABT_DOUBLE_WORD || dabt.size == DABT_WORD );
+}
+
 static int __vgic_v3_rdistr_rd_mmio_read(struct vcpu *v, mmio_info_t *info,
                                          uint32_t gicr_reg,
                                          register_t *r)
@@ -173,10 +182,11 @@ static int __vgic_v3_rdistr_rd_mmio_read(struct vcpu *v, mmio_info_t *info,
         *r = vgic_reg32_extract(GICV3_GICR_IIDR_VAL, info);
         return 1;
     case GICR_TYPER:
+    case GICR_TYPER + 4:
     {
         uint64_t typer, aff;
 
-        if ( dabt.size != DABT_DOUBLE_WORD ) goto bad_width;
+        if ( !vgic_reg64_check_access(dabt) ) goto bad_width;
         /* TBD: Update processor id in [23:8] when ITS support is added */
         aff = (MPIDR_AFFINITY_LEVEL(v->arch.vmpidr, 3) << 56 |
                MPIDR_AFFINITY_LEVEL(v->arch.vmpidr, 2) << 48 |
@@ -262,7 +272,7 @@ bad_width:
     return 0;
 
 read_as_zero_64:
-    if ( dabt.size != DABT_DOUBLE_WORD ) goto bad_width;
+    if ( !vgic_reg64_check_access(dabt) ) goto bad_width;
     *r = 0;
     return 1;
 
@@ -338,7 +348,7 @@ bad_width:
     return 0;
 
 write_ignore_64:
-    if ( dabt.size != DABT_DOUBLE_WORD ) goto bad_width;
+    if ( vgic_reg64_check_access(dabt) ) goto bad_width;
     return 1;
 
 write_ignore_32:
@@ -803,7 +813,7 @@ static int vgic_v3_distr_mmio_read(struct vcpu *v, mmio_info_t *info,
     {
         uint64_t irouter;
 
-        if ( dabt.size != DABT_DOUBLE_WORD ) goto bad_width;
+        if ( !vgic_reg64_check_access(dabt) ) goto bad_width;
         rank = vgic_rank_offset(v, 64, gicd_reg - GICD_IROUTER,
                                 DABT_DOUBLE_WORD);
         if ( rank == NULL ) goto read_as_zero;
@@ -878,7 +888,7 @@ bad_width:
     return 0;
 
 read_as_zero_64:
-    if ( dabt.size != DABT_DOUBLE_WORD ) goto bad_width;
+    if ( vgic_reg64_check_access(dabt) ) goto bad_width;
     *r = 0;
     return 1;
 
@@ -964,7 +974,7 @@ static int vgic_v3_distr_mmio_write(struct vcpu *v, mmio_info_t *info,
     {
         uint64_t irouter;
 
-        if ( dabt.size != DABT_DOUBLE_WORD ) goto bad_width;
+        if ( !vgic_reg64_check_access(dabt) ) goto bad_width;
         rank = vgic_rank_offset(v, 64, gicd_reg - GICD_IROUTER,
                                 DABT_DOUBLE_WORD);
         if ( rank == NULL ) goto write_ignore;
@@ -1023,7 +1033,7 @@ write_ignore_32:
     return 1;
 
 write_ignore_64:
-    if ( dabt.size != DABT_DOUBLE_WORD ) goto bad_width;
+    if ( vgic_reg64_check_access(dabt) ) goto bad_width;
     return 1;
 
 write_ignore:
-- 
2.1.4

  parent reply	other threads:[~2015-10-07 14:43 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-07 14:41 [PATCH v3 0/9] xen/arm: vgic: Support 32-bit access for 64-bit register Julien Grall
2015-10-07 14:41 ` [PATCH v3 1/9] xen/arm: io: remove mmio_check_t typedef Julien Grall
2015-10-07 14:41 ` [PATCH v3 2/9] xen/arm: io: Extend write/read handler to pass the register in parameter Julien Grall
2015-10-07 14:41 ` [PATCH v3 3/9] xen/arm: io: Support sign-extension for every read access Julien Grall
2015-10-07 14:41 ` [PATCH v3 4/9] xen/arm: vgic: ctlr stores a 32-bit hardware register so use uint32_t Julien Grall
2015-10-07 14:41 ` [PATCH v3 5/9] xen/arm: vgic: Optimize the way to store GICD_IPRIORITYR in the rank Julien Grall
2015-10-07 14:41 ` [PATCH v3 6/9] xen/arm: vgic: Introduce a new field to store the rank index and use it Julien Grall
2015-10-07 14:41 ` [PATCH v3 7/9] xen/arm: vgic: Optimize the way to store the target vCPU in the rank Julien Grall
2015-10-07 15:38   ` Ian Campbell
2015-10-07 15:48     ` Julien Grall
2015-10-07 16:00       ` Ian Campbell
2015-10-07 16:29         ` Julien Grall
2015-10-07 19:13           ` Julien Grall
2015-10-08  9:39             ` Ian Campbell
2015-10-08 10:43               ` Julien Grall
2015-10-07 17:26   ` Stefano Stabellini
2015-10-07 18:16     ` Julien Grall
2015-10-08 10:56       ` Ian Campbell
2015-10-08 11:36         ` Stefano Stabellini
2015-10-08 12:23           ` Ian Campbell
2015-10-08 12:34             ` Stefano Stabellini
2015-10-08 13:46             ` Julien Grall
2015-10-08 14:25               ` Ian Campbell
2015-10-08 18:36                 ` Julien Grall
2015-10-09 11:24                   ` Julien Grall
2015-10-09 11:38                     ` Ian Campbell
2015-10-12 10:41                 ` Stefano Stabellini
2015-10-12 11:00                   ` Julien Grall
2015-10-12 11:07                     ` Stefano Stabellini
2015-10-12 11:28                       ` Julien Grall
2015-10-07 14:41 ` [PATCH v3 8/9] xen/arm: vgic: Introduce helpers to extract/update/clear/set vGIC register Julien Grall
2015-10-07 14:41 ` Julien Grall [this message]
2015-10-08 10:44 ` [PATCH v3 0/9] xen/arm: vgic: Support 32-bit access for 64-bit register Julien Grall
2015-10-08 11:46   ` Ian Campbell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1444228871-383-10-git-send-email-julien.grall@citrix.com \
    --to=julien.grall@citrix.com \
    --cc=ian.campbell@citrix.com \
    --cc=stefano.stabellini@eu.citrix.com \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).