xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: George Dunlap <george.dunlap@eu.citrix.com>
To: xen-devel@lists.xen.org
Cc: George Dunlap <george.dunlap@eu.citrix.com>,
	Ian Jackson <ian.jackson@citrix.com>,
	Wei Liu <wei.liu2@citrix.com>,
	George Dunlap <george.dunlap@citrix.com>,
	Ian Campbell <ian.campbell@citrix.com>
Subject: [PATCH v3 2/6] libxl: Fix libxl_set_memory_target return value
Date: Tue, 1 Dec 2015 11:53:51 +0000	[thread overview]
Message-ID: <1448970835-2706-2-git-send-email-george.dunlap@eu.citrix.com> (raw)
In-Reply-To: <1448970835-2706-1-git-send-email-george.dunlap@eu.citrix.com>

libxl_set_memory_target seems to have the following return values:

* 1 on failure, if the failure happens because of a xenstore error *or* invalid target

* -1 if the setmaxmem hypercall

* -errno if the set_pod_target hypercall target fails

* 1 on success (!)

Make it consistenstly return ERROR_FAIL, unless the parameters were
invalid.

To make this more robust, use 'lrc' for return values to functions
whose return values are a different error space (like
xc_domain_setmaxmem and xc_domain_set_pod_target), or where a failure
means retry, rather than fail the whole function
(libxl__fill_dom0_memory_info), to reduce the risk that future code
shuffles will accidentally clobber the return value again.

Also remove the final call to xc_domain_getinfolist. There's no
obvious reason for this call -- all it seems to be doing is checking
to see if the domain exists; but if it doesn't exist, it will have
already failed by this point.

Signed-off-by: George Dunlap <george.dunlap@citrix.com>
---
CC: Ian Campbell <ian.campbell@citrix.com>
CC: Ian Jackson <ian.jackson@citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
---
 tools/libxl/libxl.c | 27 +++++++++++++--------------
 1 file changed, 13 insertions(+), 14 deletions(-)

diff --git a/tools/libxl/libxl.c b/tools/libxl/libxl.c
index 814d056..f8a0642 100644
--- a/tools/libxl/libxl.c
+++ b/tools/libxl/libxl.c
@@ -4722,7 +4722,7 @@ int libxl_set_memory_target(libxl_ctx *ctx, uint32_t domid,
         int32_t target_memkb, int relative, int enforce)
 {
     GC_INIT(ctx);
-    int rc = 1, abort_transaction = 0;
+    int rc = ERROR_FAIL, abort_transaction = 0, lrc;
     uint64_t memorykb;
     uint32_t videoram = 0;
     uint32_t current_target_memkb = 0, new_target_memkb = 0;
@@ -4750,9 +4750,9 @@ retry_transaction:
     if (!target && !domid) {
         if (!xs_transaction_end(ctx->xsh, t, 1))
             goto out_no_transaction;
-        rc = libxl__fill_dom0_memory_info(gc, &current_target_memkb,
+        lrc = libxl__fill_dom0_memory_info(gc, &current_target_memkb,
                                           &current_max_memkb);
-        if (rc < 0)
+        if (lrc < 0)
             goto out_no_transaction;
         goto retry_transaction;
     } else if (!target) {
@@ -4800,6 +4800,7 @@ retry_transaction:
             "memory_dynamic_max must be less than or equal to"
             " memory_static_max\n");
         abort_transaction = 1;
+        rc = ERROR_INVAL;
         goto out;
     }
 
@@ -4807,43 +4808,39 @@ retry_transaction:
         LOG(ERROR, "new target %d for dom0 is below the minimum threshold",
             new_target_memkb);
         abort_transaction = 1;
+        rc = ERROR_INVAL;
         goto out;
     }
 
     if (enforce) {
         memorykb = new_target_memkb + videoram;
-        rc = xc_domain_setmaxmem(ctx->xch, domid, memorykb +
+        lrc = xc_domain_setmaxmem(ctx->xch, domid, memorykb +
                 LIBXL_MAXMEM_CONSTANT);
-        if (rc != 0) {
+        if (lrc != 0) {
             LOGE(ERROR,
                  "xc_domain_setmaxmem domid=%u memkb=%"PRIu64" failed ""rc=%d\n",
                  domid,
                  memorykb + LIBXL_MAXMEM_CONSTANT,
-                 rc);
+                 lrc);
             abort_transaction = 1;
             goto out;
         }
     }
 
-    rc = xc_domain_set_pod_target(ctx->xch, domid,
+    lrc = xc_domain_set_pod_target(ctx->xch, domid,
             (new_target_memkb + LIBXL_MAXMEM_CONSTANT) / 4, NULL, NULL, NULL);
-    if (rc != 0) {
+    if (lrc != 0) {
         LOGE(ERROR,
              "xc_domain_set_pod_target domid=%d, memkb=%d ""failed rc=%d\n",
              domid,
              new_target_memkb / 4,
-             rc);
+             lrc);
         abort_transaction = 1;
         goto out;
     }
 
     libxl__xs_write(gc, t, GCSPRINTF("%s/memory/target",
                 dompath), "%"PRIu32, new_target_memkb);
-    rc = xc_domain_getinfolist(ctx->xch, domid, 1, &info);
-    if (rc != 1 || info.domain != domid) {
-        abort_transaction = 1;
-        goto out;
-    }
 
     libxl_dominfo_init(&ptr);
     xcinfo2xlinfo(ctx, &info, &ptr);
@@ -4852,6 +4849,8 @@ retry_transaction:
             "%"PRIu32, new_target_memkb / 1024);
     libxl_dominfo_dispose(&ptr);
 
+    rc = 0;
+
 out:
     if (!xs_transaction_end(ctx->xsh, t, abort_transaction)
         && !abort_transaction)
-- 
2.1.4

  reply	other threads:[~2015-12-01 11:53 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-01 11:53 [PATCH v3 1/6] xl: Return proper error codes for block-attach and block-detach George Dunlap
2015-12-01 11:53 ` George Dunlap [this message]
2015-12-08 17:19   ` [PATCH v3 2/6] libxl: Fix libxl_set_memory_target return value Ian Campbell
2015-12-08 17:25     ` George Dunlap
2015-12-01 11:53 ` [PATCH v3 3/6] xl: Make set_memory_target return an error code on failure George Dunlap
2015-12-08 17:28   ` Ian Campbell
2015-12-01 11:53 ` [PATCH v3 4/6] xl: Return an error on failed cd-insert George Dunlap
2015-12-08 17:29   ` Ian Campbell
2015-12-01 11:53 ` [PATCH v3 5/6] xl: Return error codes for pci* commands George Dunlap
2015-12-08 17:32   ` Ian Campbell
2015-12-01 11:53 ` [PATCH v3 6/6] xl: Return error code on save George Dunlap
2015-12-08 17:38   ` Ian Campbell
2015-12-16 18:25   ` George Dunlap
2015-12-08 12:24 ` [PATCH v3 1/6] xl: Return proper error codes for block-attach and block-detach George Dunlap
2015-12-08 17:15 ` Ian Campbell
2015-12-16 16:53   ` George Dunlap
2015-12-16 17:13     ` George Dunlap
2016-01-04 14:30   ` Wei Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1448970835-2706-2-git-send-email-george.dunlap@eu.citrix.com \
    --to=george.dunlap@eu.citrix.com \
    --cc=george.dunlap@citrix.com \
    --cc=ian.campbell@citrix.com \
    --cc=ian.jackson@citrix.com \
    --cc=wei.liu2@citrix.com \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).