From: Wen Congyang <wency@cn.fujitsu.com>
To: xen devel <xen-devel@lists.xen.org>,
Andrew Cooper <andrew.cooper3@citrix.com>,
Ian Campbell <ian.campbell@citrix.com>,
Ian Jackson <ian.jackson@eu.citrix.com>,
Wei Liu <wei.liu2@citrix.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>,
Gui Jianfeng <guijianfeng@cn.fujitsu.com>,
Jiang Yunhong <yunhong.jiang@intel.com>,
Dong Eddie <eddie.dong@intel.com>,
Shriram Rajagopalan <rshriram@cs.ubc.ca>,
Yang Hongyang <hongyang.yang@easystack.cn>
Subject: [PATCH v5 COLOPre 11/18] tools/libxl: Add back channel to allow migration target send data back
Date: Thu, 17 Dec 2015 15:48:15 +0800 [thread overview]
Message-ID: <1450338502-27335-12-git-send-email-wency@cn.fujitsu.com> (raw)
In-Reply-To: <1450338502-27335-1-git-send-email-wency@cn.fujitsu.com>
From: Yang Hongyang <hongyang.yang@easystack.cn>
In colo mode, slave needs to send data to master, but the io_fd
only can be written in master, and only can be read in slave.
Save recv_fd in domain_suspend_state, and send_fd in
domain_create_state.
Extend libxl_domain_create_restore API, add a send_fd param to
it.
Add LIBXL_HAVE_CREATE_RESTORE_SEND_FD to indicate the API change.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
---
tools/libxl/libxl.c | 2 +-
tools/libxl/libxl.h | 30 ++++++++++++++++++++++++++++--
tools/libxl/libxl_create.c | 9 +++++----
tools/libxl/libxl_internal.h | 2 ++
tools/libxl/libxl_types.idl | 1 +
tools/libxl/xl_cmdimpl.c | 8 +++++++-
tools/ocaml/libs/xl/xenlight_stubs.c | 2 +-
7 files changed, 45 insertions(+), 9 deletions(-)
diff --git a/tools/libxl/libxl.c b/tools/libxl/libxl.c
index 2faea4d..69c8047 100644
--- a/tools/libxl/libxl.c
+++ b/tools/libxl/libxl.c
@@ -872,7 +872,7 @@ int libxl_domain_remus_start(libxl_ctx *ctx, libxl_domain_remus_info *info,
dss->callback = remus_failover_cb;
dss->domid = domid;
dss->fd = send_fd;
- /* TODO do something with recv_fd */
+ dss->recv_fd = recv_fd;
dss->type = type;
dss->live = 1;
dss->debug = 0;
diff --git a/tools/libxl/libxl.h b/tools/libxl/libxl.h
index a01e448..67a4ad7 100644
--- a/tools/libxl/libxl.h
+++ b/tools/libxl/libxl.h
@@ -630,6 +630,15 @@ typedef struct libxl__ctx libxl_ctx;
#define LIBXL_HAVE_DOMAIN_CREATE_RESTORE_PARAMS 1
/*
+ * LIBXL_HAVE_DOMAIN_CREATE_RESTORE_SEND_FD 1
+ *
+ * If this is defined, libxl_domain_create_restore()'s API has changed to
+ * include a send_fd param which used for libxl migration back channel
+ * during COLO FT.
+ */
+#define LIBXL_HAVE_DOMAIN_CREATE_RESTORE_SEND_FD 1
+
+/*
* LIBXL_HAVE_CREATEINFO_PVH
* If this is defined, then libxl supports creation of a PVH guest.
*/
@@ -1143,7 +1152,7 @@ int libxl_domain_create_new(libxl_ctx *ctx, libxl_domain_config *d_config,
const libxl_asyncprogress_how *aop_console_how)
LIBXL_EXTERNAL_CALLERS_ONLY;
int libxl_domain_create_restore(libxl_ctx *ctx, libxl_domain_config *d_config,
- uint32_t *domid, int restore_fd,
+ uint32_t *domid, int restore_fd, int send_fd,
const libxl_domain_restore_params *params,
const libxl_asyncop_how *ao_how,
const libxl_asyncprogress_how *aop_console_how)
@@ -1164,7 +1173,7 @@ int static inline libxl_domain_create_restore_0x040200(
libxl_domain_restore_params_init(¶ms);
ret = libxl_domain_create_restore(
- ctx, d_config, domid, restore_fd, ¶ms, ao_how, aop_console_how);
+ ctx, d_config, domid, restore_fd, -1, ¶ms, ao_how, aop_console_how);
libxl_domain_restore_params_dispose(¶ms);
return ret;
@@ -1172,6 +1181,23 @@ int static inline libxl_domain_create_restore_0x040200(
#define libxl_domain_create_restore libxl_domain_create_restore_0x040200
+#elif defined(LIBXL_API_VERSION) && LIBXL_API_VERSION >= 0x040400 \
+ && LIBXL_API_VERSION < 0x040600
+
+int static inline libxl_domain_create_restore_0x040400(
+ libxl_ctx *ctx, libxl_domain_config *d_config,
+ uint32_t *domid, int restore_fd,
+ const libxl_domain_restore_params *params,
+ const libxl_asyncop_how *ao_how,
+ const libxl_asyncprogress_how *aop_console_how)
+ LIBXL_EXTERNAL_CALLERS_ONLY
+{
+ return libxl_domain_create_restore(ctx, d_config, domid, restore_fd,
+ -1, params, ao_how, aop_console_how);
+}
+
+#define libxl_domain_create_restore libxl_domain_create_restore_0x040400
+
#endif
int libxl_domain_soft_reset(libxl_ctx *ctx,
diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
index fdf3b46..6aa6525 100644
--- a/tools/libxl/libxl_create.c
+++ b/tools/libxl/libxl_create.c
@@ -1548,7 +1548,7 @@ static void domain_create_cb(libxl__egc *egc,
int rc, uint32_t domid);
static int do_domain_create(libxl_ctx *ctx, libxl_domain_config *d_config,
- uint32_t *domid, int restore_fd,
+ uint32_t *domid, int restore_fd, int send_fd,
const libxl_domain_restore_params *params,
const libxl_asyncop_how *ao_how,
const libxl_asyncprogress_how *aop_console_how)
@@ -1563,6 +1563,7 @@ static int do_domain_create(libxl_ctx *ctx, libxl_domain_config *d_config,
libxl_domain_config_init(&cdcs->dcs.guest_config_saved);
libxl_domain_config_copy(ctx, &cdcs->dcs.guest_config_saved, d_config);
cdcs->dcs.restore_fd = cdcs->dcs.libxc_fd = restore_fd;
+ cdcs->dcs.send_fd = send_fd;
if (restore_fd > -1) {
cdcs->dcs.restore_params = *params;
rc = libxl__fd_flags_modify_save(gc, cdcs->dcs.restore_fd,
@@ -1741,17 +1742,17 @@ int libxl_domain_create_new(libxl_ctx *ctx, libxl_domain_config *d_config,
const libxl_asyncop_how *ao_how,
const libxl_asyncprogress_how *aop_console_how)
{
- return do_domain_create(ctx, d_config, domid, -1, NULL,
+ return do_domain_create(ctx, d_config, domid, -1, -1, NULL,
ao_how, aop_console_how);
}
int libxl_domain_create_restore(libxl_ctx *ctx, libxl_domain_config *d_config,
- uint32_t *domid, int restore_fd,
+ uint32_t *domid, int restore_fd, int send_fd,
const libxl_domain_restore_params *params,
const libxl_asyncop_how *ao_how,
const libxl_asyncprogress_how *aop_console_how)
{
- return do_domain_create(ctx, d_config, domid, restore_fd, params,
+ return do_domain_create(ctx, d_config, domid, restore_fd, send_fd, params,
ao_how, aop_console_how);
}
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index e9c297d..ea57ce7 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -3116,6 +3116,7 @@ struct libxl__domain_save_state {
uint32_t domid;
int fd;
int fdfl; /* original flags on fd */
+ int recv_fd;
libxl_domain_type type;
int live;
int debug;
@@ -3453,6 +3454,7 @@ struct libxl__domain_create_state {
libxl_domain_config guest_config_saved; /* vanilla config */
int restore_fd, libxc_fd;
int restore_fdfl; /* original flags of restore_fd */
+ int send_fd;
libxl_domain_restore_params restore_params;
uint32_t domid_soft_reset;
libxl__domain_create_cb *callback;
diff --git a/tools/libxl/libxl_types.idl b/tools/libxl/libxl_types.idl
index 9aa94be..c5d5d40 100644
--- a/tools/libxl/libxl_types.idl
+++ b/tools/libxl/libxl_types.idl
@@ -232,6 +232,7 @@ libxl_hdtype = Enumeration("hdtype", [
libxl_checkpointed_stream = Enumeration("checkpointed_stream", [
(0, "NONE"),
(1, "REMUS"),
+ (2, "COLO"),
])
#
diff --git a/tools/libxl/xl_cmdimpl.c b/tools/libxl/xl_cmdimpl.c
index c1cd696..6580b59 100644
--- a/tools/libxl/xl_cmdimpl.c
+++ b/tools/libxl/xl_cmdimpl.c
@@ -159,6 +159,7 @@ struct domain_create {
char *extra_config; /* extra config string */
const char *restore_file;
int migrate_fd; /* -1 means none */
+ int send_fd; /* -1 means none */
char **migration_domname_r; /* from malloc */
};
@@ -2686,6 +2687,7 @@ static uint32_t create_domain(struct domain_create *dom_info)
int config_len = 0;
int restore_fd = -1;
int restore_fd_to_close = -1;
+ int send_fd = -1;
const libxl_asyncprogress_how *autoconnect_console_how;
struct save_file_header hdr;
uint32_t domid_soft_reset = INVALID_DOMID;
@@ -2703,6 +2705,7 @@ static uint32_t create_domain(struct domain_create *dom_info)
if (migrate_fd >= 0) {
restore_source = "<incoming migration stream>";
restore_fd = migrate_fd;
+ send_fd = dom_info->send_fd;
} else {
restore_source = restore_file;
restore_fd = open(restore_file, O_RDONLY);
@@ -2893,7 +2896,7 @@ start:
ret = libxl_domain_create_restore(ctx, &d_config,
&domid, restore_fd,
- ¶ms,
+ send_fd, ¶ms,
0, autoconnect_console_how);
libxl_domain_restore_params_dispose(¶ms);
@@ -4449,6 +4452,7 @@ static void migrate_receive(int debug, int daemonize, int monitor,
dom_info.monitor = monitor;
dom_info.paused = 1;
dom_info.migrate_fd = recv_fd;
+ dom_info.send_fd = send_fd;
dom_info.migration_domname_r = &migration_domname;
dom_info.checkpointed_stream = checkpointed;
@@ -4622,6 +4626,7 @@ int main_restore(int argc, char **argv)
dom_info.config_file = config_file;
dom_info.restore_file = checkpoint_file;
dom_info.migrate_fd = -1;
+ dom_info.send_fd = -1;
dom_info.vnc = vnc;
dom_info.vncautopass = vncautopass;
dom_info.console_autoconnect = console_autoconnect;
@@ -5088,6 +5093,7 @@ int main_create(int argc, char **argv)
dom_info.quiet = quiet;
dom_info.config_file = filename;
dom_info.migrate_fd = -1;
+ dom_info.send_fd = -1;
dom_info.vnc = vnc;
dom_info.vncautopass = vncautopass;
dom_info.console_autoconnect = console_autoconnect;
diff --git a/tools/ocaml/libs/xl/xenlight_stubs.c b/tools/ocaml/libs/xl/xenlight_stubs.c
index 4133527..1c52c2a 100644
--- a/tools/ocaml/libs/xl/xenlight_stubs.c
+++ b/tools/ocaml/libs/xl/xenlight_stubs.c
@@ -537,7 +537,7 @@ value stub_libxl_domain_create_restore(value ctx, value domain_config, value par
restore_fd = Int_val(Field(params, 0));
caml_enter_blocking_section();
- ret = libxl_domain_create_restore(CTX, &c_dconfig, &c_domid, restore_fd,
+ ret = libxl_domain_create_restore(CTX, &c_dconfig, &c_domid, restore_fd, -1,
&c_params, ao_how, NULL);
caml_leave_blocking_section();
--
2.5.0
next prev parent reply other threads:[~2015-12-17 7:48 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-17 7:48 [PATCH v5 COLOPre 00/18] Prerequisite patches for COLO Wen Congyang
2015-12-17 7:48 ` [PATCH v5 COLOPre 01/18] libxl/remus: init checkpoint_callback in Remus setup callback Wen Congyang
2015-12-17 7:48 ` [PATCH v5 COLOPre 02/18] tools/libxl: move remus code into libxl_remus.c Wen Congyang
2015-12-17 7:48 ` [PATCH v5 COLOPre 03/18] tools/libxl: move save/restore code into libxl_dom_save.c Wen Congyang
2015-12-17 7:48 ` [PATCH v5 COLOPre 04/18] libxl/save: Refactor libxl__domain_suspend_state Wen Congyang
2015-12-17 7:48 ` [PATCH v5 COLOPre 05/18] tools/libxc: support to resume uncooperative HVM guests Wen Congyang
2015-12-17 7:48 ` [PATCH v5 COLOPre 06/18] tools/libxl: introduce enum type libxl_checkpointed_stream Wen Congyang
2015-12-17 7:48 ` [PATCH v5 COLOPre 07/18] migration/save: pass checkpointed_stream from libxl to libxc Wen Congyang
2016-01-25 18:38 ` Konrad Rzeszutek Wilk
2016-01-25 19:14 ` Konrad Rzeszutek Wilk
2016-01-26 5:42 ` Wen Congyang
2015-12-17 7:48 ` [PATCH v5 COLOPre 08/18] tools/libxl: introduce libxl__domain_restore_device_model to load qemu state Wen Congyang
2016-01-25 18:41 ` Konrad Rzeszutek Wilk
2016-01-26 6:17 ` Wen Congyang
2016-01-26 15:02 ` Konrad Rzeszutek Wilk
2015-12-17 7:48 ` [PATCH v5 COLOPre 09/18] tools/libxl: introduce libxl__domain_common_switch_qemu_logdirty() Wen Congyang
2015-12-17 7:48 ` [PATCH v5 COLOPre 10/18] tools/libxl: export logdirty_init Wen Congyang
2015-12-17 7:48 ` Wen Congyang [this message]
2015-12-17 7:48 ` [PATCH v5 COLOPre 12/18] tools/libx{l, c}: add back channel to libxc Wen Congyang
2015-12-17 7:48 ` [PATCH v5 COLOPre 13/18] tools/libxl: rename remus device to checkpoint device Wen Congyang
2015-12-17 7:48 ` [PATCH v5 COLOPre 14/18] tools/libxl: fix backword compatibility after the automatic renaming Wen Congyang
2016-01-25 19:43 ` Konrad Rzeszutek Wilk
2016-01-26 8:06 ` Wen Congyang
2016-01-26 15:02 ` Konrad Rzeszutek Wilk
2015-12-17 7:48 ` [PATCH v5 COLOPre 15/18] tools/libxl: adjust the indentation Wen Congyang
2015-12-17 7:48 ` [PATCH v5 COLOPre 16/18] tools/libxl: store remus_ops in checkpoint device state Wen Congyang
2015-12-17 7:48 ` [PATCH v5 COLOPre 17/18] tools/libxl: move remus state into a seperate structure Wen Congyang
2015-12-17 7:48 ` [PATCH v5 COLOPre 18/18] tools/libxl: seperate device init/cleanup from checkpoint device layer Wen Congyang
2016-01-04 17:02 ` [PATCH v5 COLOPre 00/18] Prerequisite patches for COLO Ian Jackson
2016-01-18 1:51 ` Wen Congyang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450338502-27335-12-git-send-email-wency@cn.fujitsu.com \
--to=wency@cn.fujitsu.com \
--cc=andrew.cooper3@citrix.com \
--cc=eddie.dong@intel.com \
--cc=guijianfeng@cn.fujitsu.com \
--cc=hongyang.yang@easystack.cn \
--cc=ian.campbell@citrix.com \
--cc=ian.jackson@eu.citrix.com \
--cc=rshriram@cs.ubc.ca \
--cc=wei.liu2@citrix.com \
--cc=xen-devel@lists.xen.org \
--cc=yunhong.jiang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).