From: Jonathan Creekmore <jonathan.creekmore@gmail.com>
To: xen-devel@lists.xenproject.org
Cc: George Dunlap <george.dunlap@eu.citrix.com>,
Jonathan Creekmore <jonathan.creekmore@gmail.com>,
Dario Faggioli <dario.faggioli@citrix.com>
Subject: [PATCH v2 1/4] build: Hook the schedulers into Kconfig
Date: Fri, 18 Dec 2015 15:41:27 -0600 [thread overview]
Message-ID: <1450474890-15491-2-git-send-email-jonathan.creekmore@gmail.com> (raw)
In-Reply-To: <1450474890-15491-1-git-send-email-jonathan.creekmore@gmail.com>
Allow the schedulers to be independently enabled or disabled at
compile-time. To match existing behavior, all four schedulers are
compiled in by default, although the Credit2, RTDS, and ARINC653 are
marked EXPERIMENTAL to match their not currently supported status.
CC: George Dunlap <george.dunlap@eu.citrix.com>
CC: Dario Faggioli <dario.faggioli@citrix.com>
Signed-off-by: Jonathan Creekmore <jonathan.creekmore@gmail.com>
Acked-by: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
---
Changed since v1:
* Marked credit2 as EXPERIMENTAL
* Removed confusing language from the commit message
* Alphabetize the schedulers
---
xen/common/Kconfig | 64 +++++++++++++++++++++++++++++++++++++++++++++++++++
xen/common/Makefile | 8 +++----
xen/common/schedule.c | 12 ++++++++--
3 files changed, 78 insertions(+), 6 deletions(-)
diff --git a/xen/common/Kconfig b/xen/common/Kconfig
index 7d0e9a9..7f02738 100644
--- a/xen/common/Kconfig
+++ b/xen/common/Kconfig
@@ -44,4 +44,68 @@ config KEXEC
If unsure, say Y.
+# Enable schedulers
+menu "Schedulers"
+config SCHED_CREDIT
+ bool "Credit scheduler support"
+ default y
+ ---help---
+ The traditional credit scheduler is a general purpose scheduler.
+
+ If unsure, say Y.
+
+config SCHED_CREDIT2
+ bool "Credit2 scheduler support (EXPERIMENTAL)"
+ default y
+ ---help---
+ The credit2 scheduler is a general purpose scheduler that is
+ optimized for lower latency and higher VM density.
+
+ If unsure, say Y.
+
+config SCHED_RTDS
+ bool "RTDS scheduler support (EXPERIMENTAL)"
+ default y
+ ---help---
+ The RTDS scheduler is a soft and firm real-time scheduler for
+ multicore, targeted for embedded, automotive, graphics and gaming
+ in the cloud, and general low-latency workloads.
+
+ If unsure, say N.
+
+config SCHED_ARINC653
+ bool "ARINC653 scheduler support (EXPERIMENTAL)"
+ default y
+ ---help---
+ The ARINC653 scheduler is a hard real-time scheduler for single
+ cores, targeted for avionics, drones, and medical devices.
+
+ If unsure, say N.
+
+choice
+ prompt "Default Scheduler?"
+ default SCHED_CREDIT_DEFAULT if SCHED_CREDIT
+ default SCHED_CREDIT2_DEFAULT if SCHED_CREDIT2
+ default SCHED_RTDS_DEFAULT if SCHED_RTDS
+ default SCHED_ARINC653_DEFAULT if SCHED_ARINC653
+
+ config SCHED_CREDIT_DEFAULT
+ bool "Credit Scheduler" if SCHED_CREDIT
+ config SCHED_CREDIT2_DEFAULT
+ bool "Credit2 Scheduler" if SCHED_CREDIT2
+ config SCHED_RTDS_DEFAULT
+ bool "RT Scheduler" if SCHED_RTDS
+ config SCHED_ARINC653_DEFAULT
+ bool "ARINC653 Scheduler" if SCHED_ARINC653
+endchoice
+
+config SCHED_DEFAULT
+ string
+ default "credit" if SCHED_CREDIT_DEFAULT
+ default "credit2" if SCHED_CREDIT2_DEFAULT
+ default "rtds" if SCHED_RTDS_DEFAULT
+ default "arinc653" if SCHED_ARINC653_DEFAULT
+
+endmenu
+
endmenu
diff --git a/xen/common/Makefile b/xen/common/Makefile
index 8ab15ba..29a5916 100644
--- a/xen/common/Makefile
+++ b/xen/common/Makefile
@@ -30,10 +30,10 @@ obj-y += rangeset.o
obj-y += radix-tree.o
obj-y += rbtree.o
obj-y += rcupdate.o
-obj-y += sched_credit.o
-obj-y += sched_credit2.o
-obj-y += sched_arinc653.o
-obj-y += sched_rt.o
+obj-$(CONFIG_SCHED_ARINC653) += sched_arinc653.o
+obj-$(CONFIG_SCHED_CREDIT) += sched_credit.o
+obj-$(CONFIG_SCHED_CREDIT2) += sched_credit2.o
+obj-$(CONFIG_SCHED_RTDS) += sched_rt.o
obj-y += schedule.o
obj-y += shutdown.o
obj-y += softirq.o
diff --git a/xen/common/schedule.c b/xen/common/schedule.c
index d121896..2f98a48 100644
--- a/xen/common/schedule.c
+++ b/xen/common/schedule.c
@@ -38,8 +38,8 @@
#include <public/sched.h>
#include <xsm/xsm.h>
-/* opt_sched: scheduler - default to credit */
-static char __initdata opt_sched[10] = "credit";
+/* opt_sched: scheduler - default to configured value */
+static char __initdata opt_sched[10] = CONFIG_SCHED_DEFAULT;
string_param("sched", opt_sched);
/* if sched_smt_power_savings is set,
@@ -65,10 +65,18 @@ DEFINE_PER_CPU(struct schedule_data, schedule_data);
DEFINE_PER_CPU(struct scheduler *, scheduler);
static const struct scheduler *schedulers[] = {
+#ifdef CONFIG_SCHED_CREDIT
&sched_credit_def,
+#endif
+#ifdef CONFIG_SCHED_CREDIT2
&sched_credit2_def,
+#endif
+#ifdef CONFIG_SCHED_ARINC653
&sched_arinc653_def,
+#endif
+#ifdef CONFIG_SCHED_RTDS
&sched_rtds_def,
+#endif
};
static struct scheduler __read_mostly ops;
--
2.6.4
next prev parent reply other threads:[~2015-12-18 21:41 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-18 21:41 [PATCH v2 0/4] Allow schedulers to be selectable through Kconfig Jonathan Creekmore
2015-12-18 21:41 ` Jonathan Creekmore [this message]
2015-12-18 21:41 ` [PATCH v2 2/4] build: Alloc space for sched list in the link file Jonathan Creekmore
2015-12-18 21:41 ` [PATCH v2 3/4] sched: Register the schedulers into the list Jonathan Creekmore
2015-12-18 21:41 ` [PATCH v2 4/4] sched: Use the auto-generated list of schedulers Jonathan Creekmore
2015-12-18 21:45 ` Andrew Cooper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450474890-15491-2-git-send-email-jonathan.creekmore@gmail.com \
--to=jonathan.creekmore@gmail.com \
--cc=dario.faggioli@citrix.com \
--cc=george.dunlap@eu.citrix.com \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).