From: Gerd Hoffmann <kraxel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: qemu-devel-qX2TKyscuCcdnm+yROfE0A@public.gmane.org
Cc: igvt-g-y27Ovi1pjclAfugRpC6u6w@public.gmane.org,
xen-devel-GuqFBffKawuULHF6PoxzQEEOCMrvLtNR@public.gmane.org,
Eduardo Habkost
<ehabkost-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
Stefano Stabellini
<stefano.stabellini-mvvWK6WmYclDPfheJLI6IQ@public.gmane.org>,
Cao jin <caoj.fnst-BthXqXjhjHXQFUHtdCDX3A@public.gmane.org>,
vfio-users-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Subject: [PATCH v3 00/11] igd passthrough chipset tweaks
Date: Tue, 5 Jan 2016 12:41:27 +0100 [thread overview]
Message-ID: <1451994098-6972-1-git-send-email-kraxel@redhat.com> (raw)
Hi,
We have some code in our tree to support pci passthrough of intel
graphics devices (igd) on xen, which requires some chipset tweaks
for (a) the host bridge and (b) the lpc/isa-bridge to meat the
expectations of the guest driver.
For kvm we need pretty much the same, also the requirements for vgpu
(xengt/kvmgt) are very simliar. This patch wires up the existing
support for kvm. It also brings a bunch of bugfixes and cleanups.
Unfortunaly the oldish laptop I had planned to use for testing turned
out to have no working iommu support for igd, so this patch series
still has seen very light testing only. Any testing feedback is very
welcome.
Testing with kvm/i440fx:
Add '-M pc,igd-passthru=on' to turn on the chipset tweaks.
Passthrough the igd using vfio.
Testing with kvm/q35:
Add '-M q35,igd-passthru=on' to turn on the the chipset tweaks.
Pick up the linux kernel patch referenced in patch #11, build a
custom kernel with it. Passthrough the igd using vfio.
Testing with xen:
Existing setups should continue working ;)
Changes in v3:
* Handle igd-passthrough-isa-bridge creation in machine init.
* Fix xen build failure.
Changes in v2:
* Added igd-passthrough-isa-bridge support form kvm.
* Added patch to drop has_igd_gfx_passthru.
cheers,
Gerd
Gerd Hoffmann (11):
pc: wire up TYPE_IGD_PASSTHROUGH_I440FX_PCI_DEVICE for !xen
pc: remove has_igd_gfx_passthru global
pc: move igd support code to igd.c
igd: switch TYPE_IGD_PASSTHROUGH_I440FX_PCI_DEVICE to realize
igd: TYPE_IGD_PASSTHROUGH_I440FX_PCI_DEVICE: call parent realize
igd: use defines for standard pci config space offsets
igd: revamp host config read
igd: add q35 support
igd: move igd-passthrough-isa-bridge to igd.c too
igd: handle igd-passthrough-isa-bridge setup in realize()
igd: move igd-passthrough-isa-bridge creation to machine init
hw/i386/pc_piix.c | 130 +++------------------------------
hw/pci-host/Makefile.objs | 3 +
hw/pci-host/igd.c | 181 ++++++++++++++++++++++++++++++++++++++++++++++
hw/pci-host/piix.c | 88 ----------------------
hw/pci-host/q35.c | 6 +-
hw/xen/xen_pt.c | 14 ----
hw/xen/xen_pt.h | 5 +-
include/hw/i386/pc.h | 2 +-
vl.c | 10 ---
9 files changed, 204 insertions(+), 235 deletions(-)
create mode 100644 hw/pci-host/igd.c
--
1.8.3.1
next reply other threads:[~2016-01-05 11:41 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-05 11:41 Gerd Hoffmann [this message]
[not found] ` <1451994098-6972-1-git-send-email-kraxel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-01-05 11:41 ` [PATCH v3 01/11] pc: wire up TYPE_IGD_PASSTHROUGH_I440FX_PCI_DEVICE for !xen Gerd Hoffmann
2016-01-05 11:41 ` [PATCH v3 02/11] pc: remove has_igd_gfx_passthru global Gerd Hoffmann
2016-01-06 14:32 ` [Xen-devel] " Stefano Stabellini
2016-01-19 15:09 ` Eduardo Habkost
2016-01-05 11:41 ` [PATCH v3 03/11] pc: move igd support code to igd.c Gerd Hoffmann
2016-01-05 11:41 ` [PATCH v3 04/11] igd: switch TYPE_IGD_PASSTHROUGH_I440FX_PCI_DEVICE to realize Gerd Hoffmann
2016-01-06 14:32 ` Stefano Stabellini
2016-01-23 14:51 ` Eduardo Habkost
2016-01-25 8:59 ` Gerd Hoffmann
2016-01-25 11:53 ` Stefano Stabellini
2016-01-05 11:41 ` [PATCH v3 05/11] igd: TYPE_IGD_PASSTHROUGH_I440FX_PCI_DEVICE: call parent realize Gerd Hoffmann
[not found] ` <1451994098-6972-6-git-send-email-kraxel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-01-06 14:41 ` Stefano Stabellini
2016-01-06 15:45 ` Gerd Hoffmann
[not found] ` <1452095101.6096.55.camel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-01-19 15:13 ` Eduardo Habkost
[not found] ` <20160119151302.GB3869-CWx9maZTQ9aWdW/7B+e53bcJ0lE8rU3a@public.gmane.org>
2016-01-20 9:10 ` Gerd Hoffmann
2016-01-23 14:52 ` Eduardo Habkost
2016-01-05 11:41 ` [PATCH v3 07/11] igd: revamp host config read Gerd Hoffmann
2016-01-06 15:02 ` Stefano Stabellini
2016-01-06 15:51 ` Gerd Hoffmann
[not found] ` <1452095486.6096.61.camel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-01-06 16:23 ` [Xen-devel] " Stefano Stabellini
2016-01-05 11:41 ` [PATCH v3 08/11] igd: add q35 support Gerd Hoffmann
2016-01-05 11:41 ` [PATCH v3 09/11] igd: move igd-passthrough-isa-bridge to igd.c too Gerd Hoffmann
2016-01-05 11:41 ` [PATCH v3 10/11] igd: handle igd-passthrough-isa-bridge setup in realize() Gerd Hoffmann
2016-01-06 15:29 ` Stefano Stabellini
2016-01-06 15:52 ` Gerd Hoffmann
2016-01-05 11:41 ` [PATCH v3 11/11] igd: move igd-passthrough-isa-bridge creation to machine init Gerd Hoffmann
2016-01-06 15:36 ` Stefano Stabellini
2016-01-07 7:38 ` Gerd Hoffmann
2016-01-07 13:10 ` Stefano Stabellini
[not found] ` <alpine.DEB.2.02.1601071200210.13564-7Z66fg9igcxYtxbxJUhB2Dgeux46jI+i@public.gmane.org>
2016-01-07 15:50 ` [Qemu-devel] " Gerd Hoffmann
2016-01-08 11:20 ` Stefano Stabellini
[not found] ` <alpine.DEB.2.02.1601071743020.13564-7Z66fg9igcxYtxbxJUhB2Dgeux46jI+i@public.gmane.org>
2016-01-08 12:12 ` [Qemu-devel] " Stefano Stabellini
2016-01-08 12:32 ` Gerd Hoffmann
2016-01-08 12:38 ` Stefano Stabellini
2016-01-05 11:41 ` [PATCH v3 06/11] igd: use defines for standard pci config space offsets Gerd Hoffmann
2016-01-06 14:43 ` Stefano Stabellini
2016-01-05 13:07 ` [PATCH v3 00/11] igd passthrough chipset tweaks Michael S. Tsirkin
2016-01-28 19:35 ` [vfio-users] " Alex Williamson
2016-01-29 2:22 ` [iGVT-g] " Kay, Allen M
2016-01-29 2:54 ` Alex Williamson
2016-01-29 6:21 ` Jike Song
2016-01-29 21:58 ` Kay, Allen M
2016-02-02 7:07 ` Tian, Kevin
[not found] ` <AADFC41AFE54684AB9EE6CBC0274A5D15F794020-0J0gbvR4kThpB2pF5aRoyrfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2016-02-02 19:10 ` [iGVT-g] " Kay, Allen M
2016-02-02 19:37 ` [iGVT-g] [vfio-users] " Alex Williamson
2016-02-02 23:32 ` Kay, Allen M
2016-01-29 7:09 ` Gerd Hoffmann
2016-01-29 17:59 ` Alex Williamson
2016-01-30 1:18 ` [iGVT-g] " Kay, Allen M
2016-01-31 17:42 ` Alex Williamson
2016-02-02 0:04 ` Kay, Allen M
2016-02-02 6:42 ` [Xen-devel] " Tian, Kevin
2016-02-02 11:50 ` David Woodhouse
2016-02-02 14:54 ` Alex Williamson
2016-02-02 15:06 ` David Woodhouse
2016-02-02 14:38 ` Alex Williamson
2016-02-01 12:49 ` Gerd Hoffmann
[not found] ` <1454330962.10168.34.camel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-02-01 22:16 ` Alex Williamson
2016-02-02 7:43 ` [vfio-users] " Gerd Hoffmann
2016-02-02 7:01 ` [iGVT-g] " Tian, Kevin
2016-02-02 8:56 ` [iGVT-g] [vfio-users] " Gerd Hoffmann
2016-02-02 16:31 ` Kevin O'Connor
2016-02-02 16:49 ` Laszlo Ersek
2016-02-02 20:18 ` Alex Williamson
2016-02-03 6:08 ` Tian, Kevin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1451994098-6972-1-git-send-email-kraxel@redhat.com \
--to=kraxel-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
--cc=caoj.fnst-BthXqXjhjHXQFUHtdCDX3A@public.gmane.org \
--cc=ehabkost-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=igvt-g-y27Ovi1pjclAfugRpC6u6w@public.gmane.org \
--cc=qemu-devel-qX2TKyscuCcdnm+yROfE0A@public.gmane.org \
--cc=stefano.stabellini-mvvWK6WmYclDPfheJLI6IQ@public.gmane.org \
--cc=vfio-users-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=xen-devel-GuqFBffKawuULHF6PoxzQEEOCMrvLtNR@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).