From: Juergen Gross <jgross@suse.com>
To: xen-devel@lists.xen.org, Ian.Campbell@citrix.com,
ian.jackson@eu.citrix.com, stefano.stabellini@eu.citrix.com,
wei.liu2@citrix.com, dgdegra@tycho.nsa.gov
Cc: Juergen Gross <jgross@suse.com>
Subject: [PATCH v3 09/15] xenstore: modify init-xenstore-domain parameter syntax
Date: Fri, 8 Jan 2016 14:08:40 +0100 [thread overview]
Message-ID: <1452258526-4797-10-git-send-email-jgross@suse.com> (raw)
In-Reply-To: <1452258526-4797-1-git-send-email-jgross@suse.com>
init-xenstore-domain takes only positional parameters today. Change
this to a more flexible parameter syntax allowing to specify additional
options or to omit some.
Today the supported usage is:
init-xenstore-domain <xenstore-kernel> <memory_mb> <flask-label>
[<ramdisk-file>]
Modify this to:
init-xenstore-domain --kernel <xenstore-kernel>
--memory <memory_mb>
[--flask <flask-label>]
[--ramdisk <ramdisk-file>]
The flask label is made optional in order to support xenstore domains
without the need of a flask enabled hypervisor.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
---
tools/helpers/init-xenstore-domain.c | 87 +++++++++++++++++++++++++++++-------
1 file changed, 71 insertions(+), 16 deletions(-)
diff --git a/tools/helpers/init-xenstore-domain.c b/tools/helpers/init-xenstore-domain.c
index 124f29c..ff9968f 100644
--- a/tools/helpers/init-xenstore-domain.c
+++ b/tools/helpers/init-xenstore-domain.c
@@ -4,6 +4,7 @@
#include <string.h>
#include <stdint.h>
#include <stdlib.h>
+#include <getopt.h>
#include <sys/ioctl.h>
#include <sys/mman.h>
#include <xenctrl.h>
@@ -13,16 +14,42 @@
#include <xen-xsm/flask/flask.h>
static uint32_t domid = ~0;
+static char *kernel;
+static char *ramdisk;
+static char *flask;
+static int memory;
-static int build(xc_interface *xch, int argc, char** argv)
+static struct option options[] = {
+ { "kernel", 1, NULL, 'k' },
+ { "memory", 1, NULL, 'm' },
+ { "flask", 1, NULL, 'f' },
+ { "ramdisk", 1, NULL, 'r' },
+ { NULL, 0, NULL, 0 }
+};
+
+static void usage(void)
+{
+ fprintf(stderr,
+"Usage:\n"
+"\n"
+"init-xenstore-domain <options>\n"
+"\n"
+"where options may include:\n"
+"\n"
+" --kernel <xenstore-kernel> kernel file of the xenstore domain, mandatory\n"
+" --memory <memory size> size of the domain in MB, mandatory\n"
+" --flask <flask-label> optional flask label of the domain\n"
+" --ramdisk <ramdisk-file> optional ramdisk file for the domain\n");
+}
+
+static int build(xc_interface *xch)
{
char cmdline[512];
uint32_t ssid;
xen_domain_handle_t handle = { 0 };
int rv, xs_fd;
struct xc_dom_image *dom = NULL;
- int maxmem = atoi(argv[2]);
- int limit_kb = (maxmem + 1) * 1024;
+ int limit_kb = (memory + 1) * 1024;
xs_fd = open("/dev/xen/xenbus_backend", O_RDWR);
if ( xs_fd == -1 )
@@ -31,11 +58,18 @@ static int build(xc_interface *xch, int argc, char** argv)
return -1;
}
- rv = xc_flask_context_to_sid(xch, argv[3], strlen(argv[3]), &ssid);
- if ( rv )
+ if ( flask )
{
- fprintf(stderr, "xc_flask_context_to_sid failed\n");
- goto err;
+ rv = xc_flask_context_to_sid(xch, flask, strlen(flask), &ssid);
+ if ( rv )
+ {
+ fprintf(stderr, "xc_flask_context_to_sid failed\n");
+ goto err;
+ }
+ }
+ else
+ {
+ ssid = SECINITSID_DOMU;
}
rv = xc_domain_create(xch, ssid, handle, 0, &domid, NULL);
if ( rv )
@@ -71,16 +105,16 @@ static int build(xc_interface *xch, int argc, char** argv)
snprintf(cmdline, 512, "--event %d --internal-db", rv);
dom = xc_dom_allocate(xch, cmdline, NULL);
- rv = xc_dom_kernel_file(dom, argv[1]);
+ rv = xc_dom_kernel_file(dom, kernel);
if ( rv )
{
fprintf(stderr, "xc_dom_kernel_file failed\n");
goto err;
}
- if ( argc > 4 )
+ if ( ramdisk )
{
- rv = xc_dom_ramdisk_file(dom, argv[4]);
+ rv = xc_dom_ramdisk_file(dom, ramdisk);
if ( rv )
{
fprintf(stderr, "xc_dom_ramdisk_file failed\n");
@@ -100,7 +134,7 @@ static int build(xc_interface *xch, int argc, char** argv)
fprintf(stderr, "xc_dom_parse_image failed\n");
goto err;
}
- rv = xc_dom_mem_init(dom, maxmem);
+ rv = xc_dom_mem_init(dom, memory);
if ( rv )
{
fprintf(stderr, "xc_dom_mem_init failed\n");
@@ -154,16 +188,37 @@ err:
int main(int argc, char** argv)
{
+ int opt;
xc_interface *xch;
struct xs_handle *xsh;
char buf[16];
int rv, fd;
- if ( argc < 4 || argc > 5 )
+ while ( (opt = getopt_long(argc, argv, "", options, NULL)) != -1 )
+ {
+ switch ( opt )
+ {
+ case 'k':
+ kernel = optarg;
+ break;
+ case 'm':
+ memory = strtol(optarg, NULL, 10);
+ break;
+ case 'f':
+ flask = optarg;
+ break;
+ case 'r':
+ ramdisk = optarg;
+ break;
+ default:
+ usage();
+ return 2;
+ }
+ }
+
+ if ( optind != argc || !kernel || !memory )
{
- fprintf(stderr,
- "Use: %s <xenstore-kernel> <memory_mb> <flask-label> [<ramdisk-file>]\n",
- argv[0]);
+ usage();
return 2;
}
@@ -174,7 +229,7 @@ int main(int argc, char** argv)
return 1;
}
- rv = build(xch, argc, argv);
+ rv = build(xch);
xc_interface_close(xch);
--
2.6.2
next prev parent reply other threads:[~2016-01-08 13:08 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-08 13:08 [PATCH v3 00/15] xenstore: make it easier to run xenstore in a domain Juergen Gross
2016-01-08 13:08 ` [PATCH v3 01/15] xen: add xenstore domain flag to hypervisor Juergen Gross
2016-01-08 14:07 ` Jan Beulich
2016-01-08 16:13 ` David Vrabel
[not found] ` <568FD0B902000078000C4E8F@suse.com>
2016-01-08 14:22 ` Juergen Gross
2016-01-08 14:25 ` Andrew Cooper
2016-01-08 16:03 ` Jan Beulich
[not found] ` <568FEBE402000078000C500D@suse.com>
2016-01-08 16:10 ` Juergen Gross
2016-01-15 15:50 ` Ian Campbell
2016-01-08 13:08 ` [PATCH v3 02/15] libxc: support new xenstore domain flag in libxc Juergen Gross
2016-01-08 13:08 ` [PATCH v3 03/15] libxl: provide a flag in dominfo to avoid stopping it Juergen Gross
2016-01-15 15:51 ` Ian Campbell
2016-01-08 13:08 ` [PATCH v3 04/15] xenstore: move init-xenstore-domain to tools/helpers Juergen Gross
2016-01-15 15:51 ` Ian Campbell
2016-01-08 13:08 ` [PATCH v3 05/15] xenstore: adjust coding style of init-xenstore-domain.c Juergen Gross
2016-01-15 15:54 ` Ian Campbell
2016-01-08 13:08 ` [PATCH v3 06/15] libxl: move xen-init-dom0 to tools/helpers Juergen Gross
2016-01-15 15:55 ` Ian Campbell
2016-01-08 13:08 ` [PATCH v3 07/15] xenstore: destroy xenstore domain in case of error after creating it Juergen Gross
2016-01-15 16:02 ` Ian Campbell
2016-01-08 13:08 ` [PATCH v3 08/15] xenstore: add error messages to init-xenstore-domain Juergen Gross
2016-01-08 13:08 ` Juergen Gross [this message]
2016-01-08 13:08 ` [PATCH v3 10/15] xenstore: make use of the "xenstore domain" flag Juergen Gross
2016-01-15 16:03 ` Ian Campbell
2016-01-08 13:08 ` [PATCH v3 11/15] xenstore: add init-xenstore-domain parameter to specify cmdline Juergen Gross
2016-01-08 13:08 ` [PATCH v3 12/15] tools: split up xen-init-dom0.c Juergen Gross
2016-01-08 13:08 ` [PATCH v3 13/15] xenstore: write xenstore domain data to xenstore Juergen Gross
2016-01-08 13:08 ` [PATCH v3 14/15] tools: don't stop xenstore domain when stopping dom0 Juergen Gross
2016-01-15 16:12 ` Ian Campbell
2016-01-15 16:24 ` Juergen Gross
2016-01-08 13:08 ` [PATCH v3 15/15] docs: document xenstore domain xenstore paths Juergen Gross
2016-01-15 16:14 ` Ian Campbell
2016-01-15 16:22 ` Juergen Gross
2016-01-15 16:27 ` Ian Campbell
2016-01-15 15:04 ` [PATCH v3 00/15] xenstore: make it easier to run xenstore in a domain Juergen Gross
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1452258526-4797-10-git-send-email-jgross@suse.com \
--to=jgross@suse.com \
--cc=Ian.Campbell@citrix.com \
--cc=dgdegra@tycho.nsa.gov \
--cc=ian.jackson@eu.citrix.com \
--cc=stefano.stabellini@eu.citrix.com \
--cc=wei.liu2@citrix.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).