xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Roger Pau Monne <roger.pau@citrix.com>
To: xen-devel@lists.xenproject.org
Cc: Wei Liu <wei.liu2@citrix.com>,
	Ian Campbell <ian.campbell@citrix.com>,
	Andrew Cooper <andrew.cooper3@citrix.com>,
	Ian Jackson <ian.jackson@eu.citrix.com>,
	Jan Beulich <jbeulich@suse.com>,
	Roger Pau Monne <roger.pau@citrix.com>
Subject: [PATCH v3 4/4] x86/PV: enable the emulated PIT
Date: Fri, 15 Jan 2016 18:45:51 +0100	[thread overview]
Message-ID: <1452879951-76391-1-git-send-email-roger.pau@citrix.com> (raw)
In-Reply-To: <5699358D02000078000C7800@prv-mh.provo.novell.com>

The HVMlite series removed the initialization of the emulated PIT for PV
guests, this patch re-enables it.

Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
---
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
---
NB: Since it's not clear why an emulated PIT is needed, it won't be enabled
by default for HVMlite guests until we can figure out if/why it's needed.
---
Changes since v2:
 - Change 'if ( (a && b) || (!a && c) )' into 'if ( a ? b : c )'.

Changes since v1:
 - New in this version.
---
 tools/libxl/libxl_x86.c | 8 +++++++-
 xen/arch/x86/domain.c   | 5 +++--
 xen/arch/x86/setup.c    | 4 +++-
 3 files changed, 13 insertions(+), 4 deletions(-)

diff --git a/tools/libxl/libxl_x86.c b/tools/libxl/libxl_x86.c
index 46cfafb..7f47cc5 100644
--- a/tools/libxl/libxl_x86.c
+++ b/tools/libxl/libxl_x86.c
@@ -13,8 +13,14 @@ int libxl__arch_domain_prepare_config(libxl__gc *gc,
         LIBXL_DEVICE_MODEL_VERSION_NONE) {
         /* HVM domains with a device model. */
         xc_config->emulation_flags = XEN_X86_EMU_ALL;
+    } else if (d_config->c_info.type == LIBXL_DOMAIN_TYPE_PV) {
+        /* PV domains. */
+        xc_config->emulation_flags = XEN_X86_EMU_PIT;
     } else {
-        /* PV or HVM domains without a device model. */
+        assert(d_config->c_info.type == LIBXL_DOMAIN_TYPE_HVM);
+        assert(d_config->b_info.device_model_version ==
+               LIBXL_DEVICE_MODEL_VERSION_NONE);
+        /* HVMlite domains. */
         xc_config->emulation_flags = 0;
     }
 
diff --git a/xen/arch/x86/domain.c b/xen/arch/x86/domain.c
index 159d960..ae85e45 100644
--- a/xen/arch/x86/domain.c
+++ b/xen/arch/x86/domain.c
@@ -542,8 +542,9 @@ int arch_domain_create(struct domain *d, unsigned int domcr_flags,
                    d->domain_id, config->emulation_flags);
             return -EINVAL;
         }
-        if ( config->emulation_flags != 0 &&
-             (!is_hvm_domain(d) || config->emulation_flags != XEN_X86_EMU_ALL) )
+        if ( is_hvm_domain(d) ? (config->emulation_flags != XEN_X86_EMU_ALL &&
+             config->emulation_flags != 0) :
+             (config->emulation_flags != XEN_X86_EMU_PIT) )
         {
             printk(XENLOG_G_ERR "d%d: Xen does not allow %s domain creation "
                    "with the current selection of emulators: %#x\n",
diff --git a/xen/arch/x86/setup.c b/xen/arch/x86/setup.c
index 76c7b0f..08bd3fb 100644
--- a/xen/arch/x86/setup.c
+++ b/xen/arch/x86/setup.c
@@ -582,7 +582,9 @@ void __init noreturn __start_xen(unsigned long mbi_p)
         .parity    = 'n',
         .stop_bits = 1
     };
-    struct xen_arch_domainconfig config = { .emulation_flags = 0 };
+    struct xen_arch_domainconfig config = {
+        .emulation_flags = XEN_X86_EMU_PIT,
+    };
 
     /* Critical region without IDT or TSS.  Any fault is deadly! */
 
-- 
1.9.5 (Apple Git-50.3)


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

  reply	other threads:[~2016-01-15 17:45 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-15 14:59 [PATCH v2 0/4] HVMlite: minor fixes and Dom0 preparatory patches Roger Pau Monne
2016-01-15 14:59 ` [PATCH v2 1/4] xen/elfnotes: check phys_entry against UNSET_ADDR32 Roger Pau Monne
2016-01-19  9:21   ` Wei Liu
2016-01-15 14:59 ` [PATCH v2 2/4] libelf: rewrite symtab/strtab loading for Dom0 Roger Pau Monne
2016-01-15 14:59 ` [PATCH v2 3/4] x86/hvm: don't set the BSP as initialised in hvm_vcpu_initialise Roger Pau Monne
2016-01-15 14:59 ` [PATCH v2 4/4] x86/PV: enable the emulated PIT Roger Pau Monne
2016-01-15 17:08   ` Jan Beulich
2016-01-15 17:45     ` Roger Pau Monne [this message]
2016-01-18  7:43       ` [PATCH v3 " Jan Beulich
2016-01-18  9:29         ` Andrew Cooper
2016-01-18  9:44           ` Jan Beulich
2016-01-18 10:41             ` Andrew Cooper
2016-01-18 11:06               ` Jan Beulich
2016-01-18 16:10                 ` Andrew Cooper
2016-01-18 16:27                   ` Jan Beulich
2016-01-18 16:33                     ` Andrew Cooper
2016-01-18 16:44                       ` Jan Beulich
2016-01-18 17:58               ` Roger Pau Monné
2016-01-18 18:03                 ` Andrew Cooper
2016-01-19  9:24                   ` Ian Campbell
2016-01-19 10:09                     ` Andrew Cooper
2016-01-19 10:28                       ` Ian Campbell
2016-01-19 10:56                         ` Andrew Cooper
2016-01-20 11:57                 ` Ian Campbell
2016-01-18  9:50         ` Roger Pau Monné
2016-01-18 10:06           ` Jan Beulich

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1452879951-76391-1-git-send-email-roger.pau@citrix.com \
    --to=roger.pau@citrix.com \
    --cc=andrew.cooper3@citrix.com \
    --cc=ian.campbell@citrix.com \
    --cc=ian.jackson@eu.citrix.com \
    --cc=jbeulich@suse.com \
    --cc=wei.liu2@citrix.com \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).