xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Haozhong Zhang <haozhong.zhang@intel.com>
To: xen-devel@lists.xen.org, Jan Beulich <jbeulich@suse.com>,
	Boris Ostrovsky <boris.ostrovsky@oracle.com>,
	Kevin Tian <kevin.tian@intel.com>
Cc: Haozhong Zhang <haozhong.zhang@intel.com>,
	Keir Fraser <keir@xen.org>,
	Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>,
	Andrew Cooper <andrew.cooper3@citrix.com>,
	Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>,
	Jun Nakajima <jun.nakajima@intel.com>
Subject: [PATCH v4 06/10] x86/hvm: Setup TSC scaling ratio
Date: Mon, 18 Jan 2016 05:58:55 +0800	[thread overview]
Message-ID: <1453067939-9121-7-git-send-email-haozhong.zhang@intel.com> (raw)
In-Reply-To: <1453067939-9121-1-git-send-email-haozhong.zhang@intel.com>

This patch adds a field tsc_scaling_ratio in struct hvm_vcpu to
record the TSC scaling ratio, and sets it up when tsc_set_info() is
called for a vcpu or when a vcpu is restored or reset.

Before applying the TSC scaling ratio to CPU, we check its validity in
tsc_set_info(). If an invalid ratio is given, we will leave the default
value in tsc_scaling_ratio (i.e. ratio = 1) and setup guest TSC as if no
TSC scaling is used:
* For TSC_MODE_FAULT,
  - if a user-specified TSC frequency is given, we will set the guest
    TSC frequency to it; otherwise, we set it to the host TSC frequency.
  - if guest TSC frequency does not equal to host TSC frequency, we will
    emulate guest TSC (i.e. d->arch.vtsc is set to 1). In both cases,
    guest TSC runs in the guest TSC frequency.
* For TSC_MODE_PVRDTSCP,
  - we set the guest TSC frequency to the host TSC frequency.
  - guest rdtsc is executed natively in the host TSC frequency as
    before.
  - if rdtscp is not available to guest, it will be emulated; otherwise,
    it will be executed natively. In both cases, guest rdtscp gets TSC
    in the host TSC frequency as before.

Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
---
Changes in v4:
 (addressing Boris Ostrovsky's comments)
 * Factor out common code in hvm_validate_tsc_scaling_ratio() and
   hvm_setup_tsc_scaling()
   - replace bool_t hvm_validate_tsc_scaling_ratio(u32 gtsc_khz) with
     u64 hvm_get_tsc_scaling_ratio(u32 gtsc_khz) which returns 0 if TSC 
     scaling is not available or gtsc_khz is bogus.
 (addressing Jan Beulich's comments) 
 * Move adding setup_tsc_scaling in hvm_funcs to patch 9 where it is
   first used.

 xen/arch/x86/hvm/hvm.c            | 35 +++++++++++++++++++++++++++++++++++
 xen/arch/x86/hvm/svm/svm.c        |  6 ++++--
 xen/arch/x86/time.c               | 19 ++++++++++++++++---
 xen/include/asm-x86/hvm/hvm.h     |  3 +++
 xen/include/asm-x86/hvm/svm/svm.h |  3 ---
 xen/include/asm-x86/hvm/vcpu.h    |  2 ++
 6 files changed, 60 insertions(+), 8 deletions(-)

diff --git a/xen/arch/x86/hvm/hvm.c b/xen/arch/x86/hvm/hvm.c
index 6d30d8b..64a7760 100644
--- a/xen/arch/x86/hvm/hvm.c
+++ b/xen/arch/x86/hvm/hvm.c
@@ -65,6 +65,7 @@
 #include <asm/mtrr.h>
 #include <asm/apic.h>
 #include <asm/vm_event.h>
+#include <asm/math64.h>
 #include <public/sched.h>
 #include <public/hvm/ioreq.h>
 #include <public/version.h>
@@ -301,6 +302,34 @@ int hvm_set_guest_pat(struct vcpu *v, u64 guest_pat)
     return 1;
 }
 
+/*
+ * Get the ratio to scale host TSC frequency to gtsc_khz. zero will be
+ * returned if TSC scaling is unavailable or ratio cannot be handled
+ * by host CPU. Otherwise, a non-zero ratio will be returned.
+ */
+u64 hvm_get_tsc_scaling_ratio(u32 gtsc_khz)
+{
+    u64 ratio;
+
+    if ( !hvm_tsc_scaling_supported )
+        return 0;
+
+    /*
+     * The multiplication of the first two terms may overflow a 64-bit
+     * integer, so use mul_u64_u32_div() instead to keep precision.
+     */
+    ratio = mul_u64_u32_div(1ULL << hvm_funcs.tsc_scaling_ratio_frac_bits,
+                            gtsc_khz, cpu_khz);
+
+    return ratio > hvm_funcs.max_tsc_scaling_ratio ? 0 : ratio;
+}
+
+void hvm_setup_tsc_scaling(struct vcpu *v)
+{
+    v->arch.hvm_vcpu.tsc_scaling_ratio =
+        hvm_get_tsc_scaling_ratio(v->domain->arch.tsc_khz);
+}
+
 void hvm_set_guest_tsc_fixed(struct vcpu *v, u64 guest_tsc, u64 at_tsc)
 {
     uint64_t tsc;
@@ -2026,6 +2055,9 @@ static int hvm_load_cpu_ctxt(struct domain *d, hvm_domain_context_t *h)
     if ( hvm_funcs.load_cpu_ctxt(v, &ctxt) < 0 )
         return -EINVAL;
 
+    if ( hvm_tsc_scaling_supported && !d->arch.vtsc )
+        hvm_setup_tsc_scaling(v);
+
     v->arch.hvm_vcpu.msr_tsc_aux = ctxt.msr_tsc_aux;
 
     seg.limit = ctxt.idtr_limit;
@@ -5504,6 +5536,9 @@ void hvm_vcpu_reset_state(struct vcpu *v, uint16_t cs, uint16_t ip)
     hvm_set_segment_register(v, x86_seg_gdtr, &reg);
     hvm_set_segment_register(v, x86_seg_idtr, &reg);
 
+    if ( hvm_tsc_scaling_supported && !d->arch.vtsc )
+        hvm_setup_tsc_scaling(v);
+
     /* Sync AP's TSC with BSP's. */
     v->arch.hvm_vcpu.cache_tsc_offset =
         v->domain->vcpu[0]->arch.hvm_vcpu.cache_tsc_offset;
diff --git a/xen/arch/x86/hvm/svm/svm.c b/xen/arch/x86/hvm/svm/svm.c
index 8b316a0..17bce5c 100644
--- a/xen/arch/x86/hvm/svm/svm.c
+++ b/xen/arch/x86/hvm/svm/svm.c
@@ -808,7 +808,7 @@ static uint64_t svm_scale_tsc(const struct vcpu *v, uint64_t tsc)
 {
     ASSERT(cpu_has_tsc_ratio && !v->domain->arch.vtsc);
 
-    return scale_tsc(tsc, vcpu_tsc_ratio(v));
+    return scale_tsc(tsc, v->arch.hvm_vcpu.tsc_scaling_ratio);
 }
 
 static uint64_t svm_get_tsc_offset(uint64_t host_tsc, uint64_t guest_tsc,
@@ -985,7 +985,7 @@ static inline void svm_tsc_ratio_save(struct vcpu *v)
 static inline void svm_tsc_ratio_load(struct vcpu *v)
 {
     if ( cpu_has_tsc_ratio && !v->domain->arch.vtsc ) 
-        wrmsrl(MSR_AMD64_TSC_RATIO, vcpu_tsc_ratio(v));
+        wrmsrl(MSR_AMD64_TSC_RATIO, v->arch.hvm_vcpu.tsc_scaling_ratio);
 }
 
 static void svm_ctxt_switch_from(struct vcpu *v)
@@ -1192,6 +1192,8 @@ static int svm_vcpu_initialise(struct vcpu *v)
 
     svm_guest_osvw_init(v);
 
+    v->arch.hvm_vcpu.tsc_scaling_ratio = DEFAULT_TSC_RATIO;
+
     return 0;
 }
 
diff --git a/xen/arch/x86/time.c b/xen/arch/x86/time.c
index a243bc3..2ce6447 100644
--- a/xen/arch/x86/time.c
+++ b/xen/arch/x86/time.c
@@ -1864,7 +1864,8 @@ void tsc_set_info(struct domain *d,
          */
         if ( tsc_mode == TSC_MODE_DEFAULT && host_tsc_is_safe() &&
              (has_hvm_container_domain(d) ?
-              d->arch.tsc_khz == cpu_khz || hvm_tsc_scaling_supported :
+              (d->arch.tsc_khz == cpu_khz ||
+               hvm_get_tsc_scaling_ratio(d->arch.tsc_khz)) :
               incarnation == 0) )
         {
     case TSC_MODE_NEVER_EMULATE:
@@ -1878,7 +1879,8 @@ void tsc_set_info(struct domain *d,
         d->arch.vtsc = !boot_cpu_has(X86_FEATURE_RDTSCP) ||
                        !host_tsc_is_safe();
         enable_tsc_scaling = has_hvm_container_domain(d) &&
-                             hvm_tsc_scaling_supported && !d->arch.vtsc;
+                             !d->arch.vtsc &&
+                             hvm_get_tsc_scaling_ratio(gtsc_khz ?: cpu_khz);
         d->arch.tsc_khz = (enable_tsc_scaling && gtsc_khz) ? gtsc_khz : cpu_khz;
         set_time_scale(&d->arch.vtsc_to_ns, d->arch.tsc_khz * 1000 );
         d->arch.ns_to_vtsc = scale_reciprocal(d->arch.vtsc_to_ns);
@@ -1897,9 +1899,20 @@ void tsc_set_info(struct domain *d,
     if ( has_hvm_container_domain(d) )
     {
         hvm_set_rdtsc_exiting(d, d->arch.vtsc);
-        if ( d->vcpu && d->vcpu[0] && incarnation == 0 )
+        if ( d->vcpu && d->vcpu[0] )
         {
             /*
+             * TSC scaling ratio on BSP is set here during domain
+             * creation, while the same TSC scaling ratio on APs will
+             * be set in hvm_vcpu_reset_state().
+             */
+            if ( hvm_tsc_scaling_supported && !d->arch.vtsc )
+                hvm_setup_tsc_scaling(d->vcpu[0]);
+
+            if ( incarnation )
+                return;
+
+            /*
              * set_tsc_offset() is called from hvm_vcpu_initialise() before
              * tsc_set_info(). New vtsc mode may require recomputing TSC
              * offset.
diff --git a/xen/include/asm-x86/hvm/hvm.h b/xen/include/asm-x86/hvm/hvm.h
index 79ea59e..f2d1419 100644
--- a/xen/include/asm-x86/hvm/hvm.h
+++ b/xen/include/asm-x86/hvm/hvm.h
@@ -263,6 +263,9 @@ u64 hvm_get_guest_tsc_fixed(struct vcpu *v, u64 at_tsc);
 
 #define hvm_tsc_scaling_supported (!!hvm_funcs.default_tsc_scaling_ratio)
 
+u64 hvm_get_tsc_scaling_ratio(u32 gtsc_khz);
+void hvm_setup_tsc_scaling(struct vcpu *v);
+
 int hvm_set_mode(struct vcpu *v, int mode);
 void hvm_init_guest_time(struct domain *d);
 void hvm_set_guest_time(struct vcpu *v, u64 guest_time);
diff --git a/xen/include/asm-x86/hvm/svm/svm.h b/xen/include/asm-x86/hvm/svm/svm.h
index d60ec23..c954b7e 100644
--- a/xen/include/asm-x86/hvm/svm/svm.h
+++ b/xen/include/asm-x86/hvm/svm/svm.h
@@ -97,9 +97,6 @@ extern u32 svm_feature_flags;
 /* TSC rate */
 #define DEFAULT_TSC_RATIO       0x0000000100000000ULL
 #define TSC_RATIO_RSVD_BITS     0xffffff0000000000ULL
-#define TSC_RATIO(g_khz, h_khz) ( (((u64)(g_khz)<<32)/(u64)(h_khz)) & \
-                                  ~TSC_RATIO_RSVD_BITS )
-#define vcpu_tsc_ratio(v)       TSC_RATIO((v)->domain->arch.tsc_khz, cpu_khz)
 
 extern void svm_host_osvw_reset(void);
 extern void svm_host_osvw_init(void);
diff --git a/xen/include/asm-x86/hvm/vcpu.h b/xen/include/asm-x86/hvm/vcpu.h
index 152d9f3..901c988 100644
--- a/xen/include/asm-x86/hvm/vcpu.h
+++ b/xen/include/asm-x86/hvm/vcpu.h
@@ -175,6 +175,8 @@ struct hvm_vcpu {
     u64                 msr_tsc_adjust;
     u64                 msr_xss;
 
+    u64                 tsc_scaling_ratio;
+
     union {
         struct arch_vmx_struct vmx;
         struct arch_svm_struct svm;
-- 
2.7.0

  parent reply	other threads:[~2016-01-17 21:58 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-17 21:58 [PATCH v4 00/10] Add VMX TSC scaling support Haozhong Zhang
2016-01-17 21:58 ` [PATCH v4 01/10] x86/hvm: Scale host TSC when setting/getting guest TSC Haozhong Zhang
2016-01-18 13:39   ` Jan Beulich
2016-01-19  0:17     ` Haozhong Zhang
2016-01-19 14:27     ` Boris Ostrovsky
2016-01-17 21:58 ` [PATCH v4 02/10] x86/time.c: Scale host TSC in pvclock properly Haozhong Zhang
2016-01-18 13:42   ` Jan Beulich
2016-01-19  0:29     ` Haozhong Zhang
2016-01-17 21:58 ` [PATCH v4 03/10] svm: Remove redundant TSC scaling in svm_set_tsc_offset() Haozhong Zhang
2016-01-17 21:58 ` [PATCH v4 04/10] x86/hvm: Collect information of TSC scaling ratio Haozhong Zhang
2016-01-18 10:45   ` Egger, Christoph
2016-01-19  3:19     ` Haozhong Zhang
2016-02-05 11:41   ` Jan Beulich
2016-02-16  7:59     ` Zhang, Haozhong
2016-01-17 21:58 ` [PATCH v4 05/10] x86: Add functions for 64-bit integer arithmetic Haozhong Zhang
2016-02-05 13:36   ` Jan Beulich
2016-02-16  9:02     ` Zhang, Haozhong
2016-02-16  9:39       ` Jan Beulich
2016-02-16  9:57         ` Haozhong Zhang
2016-01-17 21:58 ` Haozhong Zhang [this message]
2016-02-05 13:54   ` [PATCH v4 06/10] x86/hvm: Setup TSC scaling ratio Jan Beulich
2016-02-16  9:44     ` Zhang, Haozhong
2016-02-16 10:12       ` Jan Beulich
2016-01-17 21:58 ` [PATCH v4 07/10] x86/hvm: Replace architecture TSC scaling by a common function Haozhong Zhang
2016-01-17 21:58 ` [PATCH v4 08/10] x86/hvm: Move saving/loading vcpu's TSC to common code Haozhong Zhang
2016-01-17 21:58 ` [PATCH v4 09/10] vmx: Add VMX RDTSC(P) scaling support Haozhong Zhang
2016-01-19  2:55   ` [RESEND PATCH " Haozhong Zhang
2016-02-05 14:06     ` Jan Beulich
2016-02-16  7:59       ` Zhang, Haozhong
2016-01-17 21:58 ` [PATCH v4 10/10] docs: Add descriptions of TSC scaling in xl.cfg and tscmode.txt Haozhong Zhang
2016-02-01  5:50 ` [PATCH v4 00/10] Add VMX TSC scaling support Haozhong Zhang
2016-02-01  7:54   ` Jan Beulich

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1453067939-9121-7-git-send-email-haozhong.zhang@intel.com \
    --to=haozhong.zhang@intel.com \
    --cc=Aravind.Gopalakrishnan@amd.com \
    --cc=andrew.cooper3@citrix.com \
    --cc=boris.ostrovsky@oracle.com \
    --cc=jbeulich@suse.com \
    --cc=jun.nakajima@intel.com \
    --cc=keir@xen.org \
    --cc=kevin.tian@intel.com \
    --cc=suravee.suthikulpanit@amd.com \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).