xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Andrew Cooper <andrew.cooper3@citrix.com>
To: Xen-devel <xen-devel@lists.xen.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>,
	Jan Beulich <JBeulich@suse.com>
Subject: [PATCH v2 18/30] x86/cpu: Rework AMD masking MSR setup
Date: Fri, 5 Feb 2016 13:42:11 +0000	[thread overview]
Message-ID: <1454679743-18133-19-git-send-email-andrew.cooper3@citrix.com> (raw)
In-Reply-To: <1454679743-18133-1-git-send-email-andrew.cooper3@citrix.com>

This patch is best reviewed as its end result rather than as a diff, as it
rewrites almost all of the setup.

On the BSP, cpuid information is used to evaluate the potential available set
of masking MSRs, and they are unconditionally probed, filling in the
availability information and hardware defaults.

The command line parameters are then combined with the hardware defaults to
further restrict the Xen default masking level.  Each cpu is then context
switched into the default levelling state.

Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
---
CC: Jan Beulich <JBeulich@suse.com>

v2:
 * Provide extra information if opt_cpu_info
 * Extra comment indicating the expected use of amd_ctxt_switch_levelling()
---
 xen/arch/x86/cpu/amd.c | 267 +++++++++++++++++++++++++++++++------------------
 1 file changed, 170 insertions(+), 97 deletions(-)

diff --git a/xen/arch/x86/cpu/amd.c b/xen/arch/x86/cpu/amd.c
index 5908cba..1708dd9 100644
--- a/xen/arch/x86/cpu/amd.c
+++ b/xen/arch/x86/cpu/amd.c
@@ -80,6 +80,13 @@ static inline int wrmsr_amd_safe(unsigned int msr, unsigned int lo,
 	return err;
 }
 
+static void wrmsr_amd(unsigned int msr, uint64_t val)
+{
+	asm volatile("wrmsr" ::
+		     "c" (msr), "a" ((uint32_t)val),
+		     "d" (val >> 32), "D" (0x9c5a203a));
+}
+
 static const struct cpuidmask {
 	uint16_t fam;
 	char rev[2];
@@ -126,126 +133,189 @@ static const struct cpuidmask *__init noinline get_cpuidmask(const char *opt)
 }
 
 /*
+ * Sets caps in expected_levelling_cap, probes for the specified mask MSR, and
+ * set caps in levelling_caps if it is found.  Processors prior to Fam 10h
+ * required a 32-bit password for masking MSRs.  Reads the default value into
+ * msr_val.
+ */
+static void __init __probe_mask_msr(unsigned int msr, uint64_t caps,
+                                    uint64_t *msr_val)
+{
+	unsigned int hi, lo;
+
+        expected_levelling_cap |= caps;
+
+	if ((rdmsr_amd_safe(msr, &lo, &hi) == 0) &&
+	    (wrmsr_amd_safe(msr, lo, hi) == 0))
+		levelling_caps |= caps;
+
+	*msr_val = ((uint64_t)hi << 32) | lo;
+}
+
+/*
+ * Probe for the existance of the expected masking MSRs.  They might easily
+ * not be available if Xen is running virtualised.
+ */
+static void __init noinline probe_masking_msrs(void)
+{
+	const struct cpuinfo_x86 *c = &boot_cpu_data;
+
+	/*
+	 * First, work out which masking MSRs we should have, based on
+	 * revision and cpuid.
+	 */
+
+	/* Fam11 doesn't support masking at all. */
+	if (c->x86 == 0x11)
+		return;
+
+	__probe_mask_msr(MSR_K8_FEATURE_MASK, LCAP_1cd,
+			 &cpuidmask_defaults._1cd);
+	__probe_mask_msr(MSR_K8_EXT_FEATURE_MASK, LCAP_e1cd,
+			 &cpuidmask_defaults.e1cd);
+
+	if (c->cpuid_level >= 7)
+		__probe_mask_msr(MSR_AMD_L7S0_FEATURE_MASK, LCAP_7ab0,
+				 &cpuidmask_defaults._7ab0);
+
+	if (c->x86 == 0x15 && c->cpuid_level >= 6 && cpuid_ecx(6))
+		__probe_mask_msr(MSR_AMD_THRM_FEATURE_MASK, LCAP_6c,
+				 &cpuidmask_defaults._6c);
+
+	/*
+	 * Don't bother warning about a mismatch if virtualised.  These MSRs
+	 * are not architectural and almost never virtualised.
+	 */
+	if ((expected_levelling_cap == levelling_caps) ||
+	    cpu_has_hypervisor)
+		return;
+
+	printk(XENLOG_WARNING "Mismatch between expected (%#x) "
+	       "and real (%#x) levelling caps: missing %#x\n",
+	       expected_levelling_cap, levelling_caps,
+	       (expected_levelling_cap ^ levelling_caps) & levelling_caps);
+	printk(XENLOG_WARNING "Fam %#x, model %#x level %#x\n",
+	       c->x86, c->x86_model, c->cpuid_level);
+	printk(XENLOG_WARNING
+	       "If not running virtualised, please report a bug\n");
+}
+
+/*
+ * Context switch levelling state to the next domain.  A parameter of NULL is
+ * used to context switch to the default host state, and is used by the BSP/AP
+ * startup code.
+ */
+static void amd_ctxt_switch_levelling(const struct domain *nextd)
+{
+	struct cpuidmasks *these_masks = &this_cpu(cpuidmasks);
+	const struct cpuidmasks *masks = &cpuidmask_defaults;
+
+#define LAZY(cap, msr, field)						\
+	({								\
+		if (((levelling_caps & cap) == cap) &&			\
+		    (these_masks->field != masks->field))		\
+		{							\
+			wrmsr_amd(msr, masks->field);			\
+			these_masks->field = masks->field;		\
+		}							\
+	})
+
+	LAZY(LCAP_1cd,  MSR_K8_FEATURE_MASK,       _1cd);
+	LAZY(LCAP_e1cd, MSR_K8_EXT_FEATURE_MASK,   e1cd);
+	LAZY(LCAP_7ab0, MSR_AMD_L7S0_FEATURE_MASK, _7ab0);
+	LAZY(LCAP_6c,   MSR_AMD_THRM_FEATURE_MASK, _6c);
+
+#undef LAZY
+}
+
+/*
  * Mask the features and extended features returned by CPUID.  Parameters are
  * set from the boot line via two methods:
  *
  *   1) Specific processor revision string
  *   2) User-defined masks
  *
- * The processor revision string parameter has precedene.
+ * The user-defined masks take precedence.
  */
-static void set_cpuidmask(const struct cpuinfo_x86 *c)
+static void __init noinline amd_init_levelling(void)
 {
-	static unsigned int feat_ecx, feat_edx;
-	static unsigned int extfeat_ecx, extfeat_edx;
-	static unsigned int l7s0_eax, l7s0_ebx;
-	static unsigned int thermal_ecx;
-	static bool_t skip_feat, skip_extfeat;
-	static bool_t skip_l7s0_eax_ebx, skip_thermal_ecx;
-	static enum { not_parsed, no_mask, set_mask } status;
-	unsigned int eax, ebx, ecx, edx;
-
-	if (status == no_mask)
-		return;
+	const struct cpuidmask *m = NULL;
 
-	if (status == set_mask)
-		goto setmask;
+	probe_masking_msrs();
 
-	ASSERT((status == not_parsed) && (c == &boot_cpu_data));
-	status = no_mask;
+	if (*opt_famrev != '\0') {
+		m = get_cpuidmask(opt_famrev);
 
-	/* Fam11 doesn't support masking at all. */
-	if (c->x86 == 0x11)
-		return;
+		if (!m)
+			printk("Invalid processor string: %s\n", opt_famrev);
+	}
 
-	if (~(opt_cpuid_mask_ecx & opt_cpuid_mask_edx &
-	      opt_cpuid_mask_ext_ecx & opt_cpuid_mask_ext_edx &
-	      opt_cpuid_mask_l7s0_eax & opt_cpuid_mask_l7s0_ebx &
-	      opt_cpuid_mask_thermal_ecx)) {
-		feat_ecx = opt_cpuid_mask_ecx;
-		feat_edx = opt_cpuid_mask_edx;
-		extfeat_ecx = opt_cpuid_mask_ext_ecx;
-		extfeat_edx = opt_cpuid_mask_ext_edx;
-		l7s0_eax = opt_cpuid_mask_l7s0_eax;
-		l7s0_ebx = opt_cpuid_mask_l7s0_ebx;
-		thermal_ecx = opt_cpuid_mask_thermal_ecx;
-	} else if (*opt_famrev == '\0') {
-		return;
-	} else {
-		const struct cpuidmask *m = get_cpuidmask(opt_famrev);
+	if ((levelling_caps & LCAP_1cd) == LCAP_1cd) {
+		uint32_t ecx, edx, tmp;
 
-		if (!m) {
-			printk("Invalid processor string: %s\n", opt_famrev);
-			printk("CPUID will not be masked\n");
-			return;
+		cpuid(0x00000001, &tmp, &tmp, &ecx, &edx);
+
+		if(~(opt_cpuid_mask_ecx & opt_cpuid_mask_edx)) {
+			ecx &= opt_cpuid_mask_ecx;
+			edx &= opt_cpuid_mask_edx;
+		} else if ( m ) {
+			ecx &= m->ecx;
+			edx &= m->edx;
 		}
-		feat_ecx = m->ecx;
-		feat_edx = m->edx;
-		extfeat_ecx = m->ext_ecx;
-		extfeat_edx = m->ext_edx;
+
+		cpuidmask_defaults._1cd &= ((uint64_t)ecx << 32) | edx;
 	}
 
-        /* Setting bits in the CPUID mask MSR that are not set in the
-         * unmasked CPUID response can cause those bits to be set in the
-         * masked response.  Avoid that by explicitly masking in software. */
-        feat_ecx &= cpuid_ecx(0x00000001);
-        feat_edx &= cpuid_edx(0x00000001);
-        extfeat_ecx &= cpuid_ecx(0x80000001);
-        extfeat_edx &= cpuid_edx(0x80000001);
+	if ((levelling_caps & LCAP_e1cd) == LCAP_e1cd) {
+		uint32_t ecx, edx, tmp;
 
-	status = set_mask;
-	printk("Writing CPUID feature mask ECX:EDX -> %08Xh:%08Xh\n", 
-	       feat_ecx, feat_edx);
-	printk("Writing CPUID extended feature mask ECX:EDX -> %08Xh:%08Xh\n", 
-	       extfeat_ecx, extfeat_edx);
+		cpuid(0x80000001, &tmp, &tmp, &ecx, &edx);
 
-	if (c->cpuid_level >= 7)
-		cpuid_count(7, 0, &eax, &ebx, &ecx, &edx);
-	else
-		ebx = eax = 0;
-	if ((eax | ebx) && ~(l7s0_eax & l7s0_ebx)) {
-		if (l7s0_eax > eax)
-			l7s0_eax = eax;
-		l7s0_ebx &= ebx;
-		printk("Writing CPUID leaf 7 subleaf 0 feature mask EAX:EBX -> %08Xh:%08Xh\n",
-		       l7s0_eax, l7s0_ebx);
-	} else
-		skip_l7s0_eax_ebx = 1;
-
-	/* Only Fam15 has the respective MSR. */
-	ecx = c->x86 == 0x15 && c->cpuid_level >= 6 ? cpuid_ecx(6) : 0;
-	if (ecx && ~thermal_ecx) {
-		thermal_ecx &= ecx;
-		printk("Writing CPUID thermal/power feature mask ECX -> %08Xh\n",
-		       thermal_ecx);
-	} else
-		skip_thermal_ecx = 1;
-
- setmask:
-	/* AMD processors prior to family 10h required a 32-bit password */
-	if (!skip_feat &&
-	    wrmsr_amd_safe(MSR_K8_FEATURE_MASK, feat_edx, feat_ecx)) {
-		skip_feat = 1;
-		printk("Failed to set CPUID feature mask\n");
+		if(~(opt_cpuid_mask_ext_ecx & opt_cpuid_mask_ext_edx)) {
+			ecx &= opt_cpuid_mask_ext_ecx;
+			edx &= opt_cpuid_mask_ext_edx;
+		} else if ( m ) {
+			ecx &= m->ext_ecx;
+			edx &= m->ext_edx;
+		}
+
+		cpuidmask_defaults.e1cd &= ((uint64_t)ecx << 32) | edx;
 	}
 
-	if (!skip_extfeat &&
-	    wrmsr_amd_safe(MSR_K8_EXT_FEATURE_MASK, extfeat_edx, extfeat_ecx)) {
-		skip_extfeat = 1;
-		printk("Failed to set CPUID extended feature mask\n");
+	if ((levelling_caps & LCAP_7ab0) == LCAP_7ab0) {
+		uint32_t eax, ebx, tmp;
+
+		cpuid(0x00000007, &eax, &ebx, &tmp, &tmp);
+
+		if(~(opt_cpuid_mask_l7s0_eax & opt_cpuid_mask_l7s0_ebx)) {
+			eax &= opt_cpuid_mask_l7s0_eax;
+			ebx &= opt_cpuid_mask_l7s0_ebx;
+		}
+
+		cpuidmask_defaults._7ab0 &= ((uint64_t)eax << 32) | ebx;
 	}
 
-	if (!skip_l7s0_eax_ebx &&
-	    wrmsr_amd_safe(MSR_AMD_L7S0_FEATURE_MASK, l7s0_ebx, l7s0_eax)) {
-		skip_l7s0_eax_ebx = 1;
-		printk("Failed to set CPUID leaf 7 subleaf 0 feature mask\n");
+	if ((levelling_caps & LCAP_6c) == LCAP_6c) {
+		uint32_t ecx = cpuid_ecx(6);
+
+		if (~opt_cpuid_mask_thermal_ecx)
+			ecx &= opt_cpuid_mask_thermal_ecx;
+
+		cpuidmask_defaults._6c &= (~0ULL << 32) | ecx;
 	}
 
-	if (!skip_thermal_ecx &&
-	    (rdmsr_amd_safe(MSR_AMD_THRM_FEATURE_MASK, &eax, &edx) ||
-	     wrmsr_amd_safe(MSR_AMD_THRM_FEATURE_MASK, thermal_ecx, edx))){
-		skip_thermal_ecx = 1;
-		printk("Failed to set CPUID thermal/power feature mask\n");
+	if (opt_cpu_info) {
+		printk(XENLOG_INFO "Levelling caps: %#x\n", levelling_caps);
+		printk(XENLOG_INFO
+		       "MSR defaults: 1d 0x%08x, 1c 0x%08x, e1d 0x%08x, "
+		       "e1c 0x%08x, 7a0 0x%08x, 7b0 0x%08x, 6c 0x%08x\n",
+		       (uint32_t)cpuidmask_defaults._1cd,
+		       (uint32_t)(cpuidmask_defaults._1cd >> 32),
+		       (uint32_t)cpuidmask_defaults.e1cd,
+		       (uint32_t)(cpuidmask_defaults.e1cd >> 32),
+		       (uint32_t)(cpuidmask_defaults._7ab0 >> 32),
+		       (uint32_t)cpuidmask_defaults._7ab0,
+		       (uint32_t)cpuidmask_defaults._6c);
 	}
 }
 
@@ -409,7 +479,10 @@ static void amd_get_topology(struct cpuinfo_x86 *c)
 
 static void early_init_amd(struct cpuinfo_x86 *c)
 {
-	set_cpuidmask(c);
+	if (c == &boot_cpu_data)
+		amd_init_levelling();
+
+	amd_ctxt_switch_levelling(NULL);
 }
 
 static void init_amd(struct cpuinfo_x86 *c)
-- 
2.1.4

  parent reply	other threads:[~2016-02-05 13:42 UTC|newest]

Thread overview: 139+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-05 13:41 [PATCH RFC v2 00/30] x86: Improvements to cpuid handling for guests Andrew Cooper
2016-02-05 13:41 ` [PATCH v2 01/30] xen/x86: Drop X86_FEATURE_3DNOW_ALT Andrew Cooper
2016-02-05 13:41 ` [PATCH v2 02/30] xen/x86: Do not store VIA/Cyrix/Centaur CPU features Andrew Cooper
2016-02-05 13:41 ` [PATCH v2 03/30] xen/x86: Drop cpuinfo_x86.x86_power Andrew Cooper
2016-02-05 13:41 ` [PATCH v2 04/30] xen/x86: Improvements to pv_cpuid() Andrew Cooper
2016-02-05 13:41 ` [PATCH v2 05/30] xen/public: Export cpu featureset information in the public API Andrew Cooper
2016-02-12 16:27   ` Jan Beulich
2016-02-17 13:08     ` Andrew Cooper
2016-02-17 13:34       ` Jan Beulich
2016-02-19 17:29   ` Joao Martins
2016-02-19 17:55     ` Andrew Cooper
2016-02-19 22:03       ` Joao Martins
2016-02-20 16:17         ` Andrew Cooper
2016-02-20 17:39           ` Joao Martins
2016-02-20 19:17             ` Andrew Cooper
2016-02-22 18:50               ` Joao Martins
2016-02-05 13:41 ` [PATCH v2 06/30] xen/x86: Script to automatically process featureset information Andrew Cooper
2016-02-12 16:36   ` Jan Beulich
2016-02-12 16:43     ` Andrew Cooper
2016-02-05 13:42 ` [PATCH v2 07/30] xen/x86: Collect more cpuid feature leaves Andrew Cooper
2016-02-12 16:38   ` Jan Beulich
2016-02-05 13:42 ` [PATCH v2 08/30] xen/x86: Mask out unknown features from Xen's capabilities Andrew Cooper
2016-02-12 16:43   ` Jan Beulich
2016-02-12 16:48     ` Andrew Cooper
2016-02-12 17:14       ` Jan Beulich
2016-02-17 13:12         ` Andrew Cooper
2016-02-05 13:42 ` [PATCH v2 09/30] xen/x86: Store antifeatures inverted in a featureset Andrew Cooper
2016-02-12 16:47   ` Jan Beulich
2016-02-12 16:50     ` Andrew Cooper
2016-02-12 17:15       ` Jan Beulich
2016-02-05 13:42 ` [PATCH v2 10/30] xen/x86: Annotate VM applicability in featureset Andrew Cooper
2016-02-12 17:05   ` Jan Beulich
2016-02-12 17:42     ` Andrew Cooper
2016-02-15  9:20       ` Jan Beulich
2016-02-15 14:38         ` Andrew Cooper
2016-02-15 14:50           ` Jan Beulich
2016-02-15 14:53             ` Andrew Cooper
2016-02-15 15:02               ` Jan Beulich
2016-02-15 15:41                 ` Andrew Cooper
2016-02-17 19:02                   ` Is: PVH dom0 - MWAIT detection logic to get deeper C-states exposed in ACPI AML code. Was:Re: " Konrad Rzeszutek Wilk
2016-02-17 19:58                     ` Boris Ostrovsky
2016-02-18 15:02                     ` Roger Pau Monné
2016-02-18 15:12                       ` Andrew Cooper
2016-02-18 16:24                         ` Boris Ostrovsky
2016-02-18 16:48                           ` Andrew Cooper
2016-02-18 17:03                         ` Roger Pau Monné
2016-02-18 22:08                           ` Konrad Rzeszutek Wilk
2016-02-18 15:16                       ` David Vrabel
2016-02-05 13:42 ` [PATCH v2 11/30] xen/x86: Calculate maximum host and guest featuresets Andrew Cooper
2016-02-15 13:37   ` Jan Beulich
2016-02-15 14:57     ` Andrew Cooper
2016-02-15 15:07       ` Jan Beulich
2016-02-15 15:52         ` Andrew Cooper
2016-02-05 13:42 ` [PATCH v2 12/30] xen/x86: Generate deep dependencies of features Andrew Cooper
2016-02-15 14:06   ` Jan Beulich
2016-02-15 15:28     ` Andrew Cooper
2016-02-15 15:52       ` Jan Beulich
2016-02-15 16:09         ` Andrew Cooper
2016-02-15 16:27           ` Jan Beulich
2016-02-15 19:07             ` Andrew Cooper
2016-02-16  9:54               ` Jan Beulich
2016-02-17 10:25                 ` Andrew Cooper
2016-02-17 10:42                   ` Jan Beulich
2016-02-05 13:42 ` [PATCH v2 13/30] xen/x86: Clear dependent features when clearing a cpu cap Andrew Cooper
2016-02-15 14:53   ` Jan Beulich
2016-02-15 15:33     ` Andrew Cooper
2016-02-15 14:56   ` Jan Beulich
2016-02-05 13:42 ` [PATCH v2 14/30] xen/x86: Improve disabling of features which have dependencies Andrew Cooper
2016-02-05 13:42 ` [PATCH v2 15/30] xen/x86: Improvements to in-hypervisor cpuid sanity checks Andrew Cooper
2016-02-15 15:43   ` Jan Beulich
2016-02-15 17:12     ` Andrew Cooper
2016-02-16 10:06       ` Jan Beulich
2016-02-17 10:43         ` Andrew Cooper
2016-02-17 10:55           ` Jan Beulich
2016-02-17 14:02             ` Andrew Cooper
2016-02-17 14:45               ` Jan Beulich
2016-02-18 12:17                 ` Andrew Cooper
2016-02-18 13:23                   ` Jan Beulich
2016-02-05 13:42 ` [PATCH v2 16/30] x86/cpu: Move set_cpumask() calls into c_early_init() Andrew Cooper
2016-02-16 14:10   ` Jan Beulich
2016-02-17 10:45     ` Andrew Cooper
2016-02-17 10:58       ` Jan Beulich
2016-02-18 12:41         ` Andrew Cooper
2016-02-05 13:42 ` [PATCH v2 17/30] x86/cpu: Common infrastructure for levelling context switching Andrew Cooper
2016-02-16 14:15   ` Jan Beulich
2016-02-17  8:15     ` Jan Beulich
2016-02-17 10:46       ` Andrew Cooper
2016-02-17 19:06   ` Konrad Rzeszutek Wilk
2016-02-05 13:42 ` Andrew Cooper [this message]
2016-02-17  7:40   ` [PATCH v2 18/30] x86/cpu: Rework AMD masking MSR setup Jan Beulich
2016-02-17 10:56     ` Andrew Cooper
2016-02-05 13:42 ` [PATCH v2 19/30] x86/cpu: Rework Intel masking/faulting setup Andrew Cooper
2016-02-17  7:57   ` Jan Beulich
2016-02-17 10:59     ` Andrew Cooper
2016-02-05 13:42 ` [PATCH v2 20/30] x86/cpu: Context switch cpuid masks and faulting state in context_switch() Andrew Cooper
2016-02-17  8:06   ` Jan Beulich
2016-02-05 13:42 ` [PATCH v2 21/30] x86/pv: Provide custom cpumasks for PV domains Andrew Cooper
2016-02-17  8:13   ` Jan Beulich
2016-02-17 11:03     ` Andrew Cooper
2016-02-17 11:14       ` Jan Beulich
2016-02-18 12:48         ` Andrew Cooper
2016-02-05 13:42 ` [PATCH v2 22/30] x86/domctl: Update PV domain cpumasks when setting cpuid policy Andrew Cooper
2016-02-17  8:22   ` Jan Beulich
2016-02-17 12:13     ` Andrew Cooper
2016-02-05 13:42 ` [PATCH v2 23/30] xen+tools: Export maximum host and guest cpu featuresets via SYSCTL Andrew Cooper
2016-02-05 16:12   ` Wei Liu
2016-02-17  8:30   ` Jan Beulich
2016-02-17 12:17     ` Andrew Cooper
2016-02-17 12:23       ` Jan Beulich
2016-02-05 13:42 ` [PATCH v2 24/30] tools/libxc: Modify bitmap operations to take void pointers Andrew Cooper
2016-02-05 16:12   ` Wei Liu
2016-02-08 11:40     ` Andrew Cooper
2016-02-08 16:23   ` Tim Deegan
2016-02-08 16:36     ` Ian Campbell
2016-02-10 10:07       ` Andrew Cooper
2016-02-10 10:18         ` Ian Campbell
2016-02-18 13:37           ` Andrew Cooper
2016-02-17 20:06         ` Konrad Rzeszutek Wilk
2016-02-05 13:42 ` [PATCH v2 25/30] tools/libxc: Use public/featureset.h for cpuid policy generation Andrew Cooper
2016-02-05 16:12   ` Wei Liu
2016-02-05 13:42 ` [PATCH v2 26/30] tools/libxc: Expose the automatically generated cpu featuremask information Andrew Cooper
2016-02-05 16:12   ` Wei Liu
2016-02-05 16:15     ` Wei Liu
2016-02-05 13:42 ` [PATCH v2 27/30] tools: Utility for dealing with featuresets Andrew Cooper
2016-02-05 16:13   ` Wei Liu
2016-02-05 13:42 ` [PATCH v2 28/30] tools/libxc: Wire a featureset through to cpuid policy logic Andrew Cooper
2016-02-05 16:13   ` Wei Liu
2016-02-05 13:42 ` [PATCH v2 29/30] tools/libxc: Use featuresets rather than guesswork Andrew Cooper
2016-02-05 16:13   ` Wei Liu
2016-02-17  8:55   ` Jan Beulich
2016-02-17 13:03     ` Andrew Cooper
2016-02-17 13:19       ` Jan Beulich
2016-02-05 13:42 ` [PATCH v2 30/30] tools/libxc: Calculate xstate cpuid leaf from guest information Andrew Cooper
2016-02-05 14:28   ` Jan Beulich
2016-02-05 15:22     ` Andrew Cooper
2016-02-08 17:26 ` [PATCH v2.5 31/30] Fix PV guest XSAVE handling with levelling Andrew Cooper
2016-02-17  9:02   ` Jan Beulich
2016-02-17 13:06     ` Andrew Cooper
2016-02-17 13:36       ` Jan Beulich

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1454679743-18133-19-git-send-email-andrew.cooper3@citrix.com \
    --to=andrew.cooper3@citrix.com \
    --cc=JBeulich@suse.com \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).