* [PATCH V14 0/6] xen pvusb toolstack work
@ 2016-02-19 10:39 Chunyan Liu
2016-02-19 10:39 ` [PATCH V14 1/6] libxl: export some functions for pvusb use Chunyan Liu
` (5 more replies)
0 siblings, 6 replies; 12+ messages in thread
From: Chunyan Liu @ 2016-02-19 10:39 UTC (permalink / raw)
To: xen-devel
Cc: jgross, olaf, wei.liu2, ian.campbell, george.dunlap, Ian.Jackson,
Chunyan Liu, jfehlig
This patch series is to add pvusb toolstack work, supporting hot add|remove
USB device to|from guest and specify USB device in domain configuration file.
Changes to V13:
* move DEFINE_DEVICE_REMOVE refactoring work into separate patch (3/6)
* adjust order of removimg xenstore and unassign usb device for a
more graceful error handling in libxl pvusb API (4/6)
* correct documentation about command line arguments (patch 6/6)
V13:
http://lists.xenproject.org/archives/html/xen-devel/2016-01/msg02125.html
V12:
http://lists.xen.org/archives/html/xen-devel/2015-12/msg02697.html
V11:
http://lists.xen.org/archives/html/xen-devel/2015-12/msg01626.html
V10:
http://lists.xen.org/archives/html/xen-devel/2015-12/msg01172.html
V9:
http://lists.xen.org/archives/html/xen-devel/2015-11/msg02744.html
V8:
http://lists.xen.org/archives/html/xen-devel/2015-10/msg02178.html
V7:
http://lists.xen.org/archives/html/xen-devel/2015-09/msg03115.html
V6:
http://lists.xen.org/archives/html/xen-devel/2015-08/msg00750.html
V5:
http://lists.xen.org/archives/html/xen-devel/2015-06/msg04052.html
V4:
http://lists.xenproject.org/archives/html/xen-devel/2015-06/msg01327.html
Related Discussion Threads:
http://www.redhat.com/archives/libvir-list/2014-June/msg00038.html
http://lists.xen.org/archives/html/xen-devel/2014-06/msg00086.html
<<< pvusb work introduction >>>
1. Overview
There are two general methods for passing through individual host
devices to a guest. The first is via an emulated USB device
controller; the second is PVUSB.
Additionally, there are two ways to add USB devices to a guest: via
the config file at domain creation time, and via hot-plug while the VM
is running.
* Emulated USB
In emulated USB, the device model (qemu) presents an emulated USB
controller to the guest. The device model process then grabs control
of the device from domain 0 and and passes the USB commands between
the guest OS and the host USB device.
This method is only available to HVM domains, and is not available for
domains running with device model stubdomains.
* PVUSB
PVUSB uses a paravirtialized front-end/back-end interface, similar to
the traditional Xen PV network and disk protocols. In order to use
PVUSB, you need usbfront in your guest OS, and usbback in dom0 (or
your USB driver domain).
2. Specifying a host USB device
QEMU qmp commands allows USB devices to be specified either by their
bus address (in the form bus.device) or their device tag (in the form
vendorid:deviceid).
Each way of specifying has its advantages:
Specifying by device tag will always get the same device,
regardless of where the device ends up in the USB bus topology.
However, if there are two identical devices, it will not allow you to
specify which one.
Specifying by bus address will always allow you to choose a
specific device, even if you have duplicates. However, the bus address
may change depending on which port you plugged the device into, and
possibly also after a reboot.
To avoid duplication of vendorid:deviceid, we'll use bus address to
specify host USB device in xl toolstack.
You can use lsusb to list the USB devices on the system:
Bus 001 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0
Hub
Bus 003 Device 002: ID f617:0905
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 0424:2640 Standard Microsystems Corp. USB 2.0
Hub
Bus 001 Device 005: ID 0424:4060 Standard Microsystems Corp. Ultra
Fast Media Reader
Bus 001 Device 006: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse
To pass through the Logitec mouse, for instance, you could specify
1.6 (remove leading zeroes).
Note: USB hubs can not be assigned to guest.
3. PVUSB toolstack
* Specify USB device in xl config file
You can just specify usb devices, like:
usbdev=['1.6']
Then it will create a USB controller automatically and attach the USB
device to the first available USB controller:port.
or, you can explicitly specify usb controllers and usb devices, like:
usbctrl=['verison=1, ports=4', 'version=2, ports=8', ]
usbdev=['1.6, controller=0, port=1']
Then it will create two USB controllers as you specified.
And if controller and port are specified in usb config, then it will
attach the USB device to that controller:port. About the controller
and port value:
Each USB controller has a index (or called devid) based on 0. The 1st
controller has index 0, the 2nd controller has index 1, ...
Under controller, each port has a port number based on 1. In above
configuration, the 1st controller will have port 1,2,3,4.
* Hot-Plug USB device
To attach a USB device, you should first create a USB controller.
e.g.
xl usb-ctrl-attach domain [version=1|2] [ports=value]
By default, it will create a USB2.0 controller with 8 ports.
Then you could attach a USB device.
e.g.
xl usb-attach domain 1.6 [controller=index port=number]
By default, it will find the 1st available controller:port to attach
the USB device.
You could view USB device status of the domain by usb-list.
e.g.
xl usb-list domain
It will list USB controllers and USB devices under each controller.
You could detach a USB device with usb-detach command.
e.g.
xl usb-detach domain 1.6
You can also remove the whole USB controller by usb-ctrl-detach
command.
e.g.
xl usb-ctrl-detach domain 0
It will remove the USB controller with index 0 and all USB devices
under it.
4. PVUSB Libxl implementation
* usb-ctrl-attach
To create a usb controller, we need:
1) generate usb controler related information
2) write usb controller frontend/backend info to xenstore
PVUSB frontend and backend driver will probe xenstore paths and build
connection between frontend and backend.
* usb-ctrl-detach
To remove a usb controller, we need:
1) check if the usb controller exists or not
2) remove all usb devices under controller
3) remove usb controller info from xenstore
* usb-attach
To attach a usb device, we need:
1) check if the usb device type is assignable
2) check if the usb device is already assigned to a domain
3) add 'busid' of the usb device to xenstore contoller/port/.
PVUSB driver watches the xenstore changes and detects that,
and needs to use 'busid' to do following work.
4) unbind usb device from original driver and bind to usbback.
If usb device has many interfaces, then:
- unbind each interface from its original driver and bind to usbback.
- store the original driver to xenstore for later rebinding when
detaching the device.
* usb-detach
To detach a usb device, we need:
1) check if the usb device is assigned to the domain
2) remove the usb device from xenstore controller/port.
3) unbind usb device from usbback and rebind to its original driver.
If usb device has many interfaces, do it to each interface.
* usb-list
List all USB controllers and USB devices under each controller.
5. PVUSB xenstore information
PVUSB xenstore information includes three parts: frontend, backend
and /libxl part.
A USB controller is corresponding to a "vusb" device in xenstore.
Adding a USB controller will add a new "vusb" device, removing a
USB controller will delete the related "vusb" device.
Following is an example xenstore values of a USB controller.
Backend:
backend = ""
vusb = ""
1 = ""
0 = ""
frontend = "/local/domain/1/device/vusb/0"
frontend-id = "1"
online = "1"
state = "4"
type = "pv"
usb-ver = "1"
num-ports = "4"
port = ""
1 = ""
2 = ""
3 = ""
4 = ""
Frontend:
device = ""
vusb = ""
0 = ""
backend = "/local/domain/0/backend/vusb/1/0"
backend-id = "0"
state = "4"
urb-ring-ref = "348"
conn-ring-ref = "346"
event-channel = "20"
Adding a USB device won't create a new "vusb" device, but only write
the USB device busid to one port of USB controller.
For example, attaching a USB device (busid is 2-1.6) to above USB
controller port 1, it only need write 2-1.6 to port 1 of this USB
controller:
Backend:
backend = ""
vusb = ""
1 = ""
0 = ""
frontend = "/local/domain/1/device/vusb/0"
frontend-id = "1"
online = "1"
state = "4"
type = "pv"
usb-ver = "1"
num-ports = "4"
port = ""
1 = "2-1.6"
2 = ""
3 = ""
4 = ""
Frontend doesn't change.
Since assign a host USB device to guest, we'll unbind USB interfaces
from their original drivers and bind them to usbback. After detaching
this USB device from guest, one would hope the USB interfaces could
be rebind to their original drivers, so there should some place to
get the original driver info. To support that, when attaching a USB
device to guest, we'll save the original driver info in xenstore too,
the place is /libxl/usbback, for example:
libxl = ""
1 = ""
dm-version = "qemu_xen"
usbback = ""
3-11 = ""
3-11@1_0 = ""
driver_path = "/sys/bus/usb/drivers/btusb"
In this example, USB device (busid is 3-11, /sys/bus/usb/devices/3-11).
It has interface 3-11:1.0, whose original dirver is btusb.
Since xenstore doesn't allow ':' and '.' in a key, so we encode the
interface by changing ':' to '@' and changing '.' to '_'.
When detaching the USB device from guest, we can rebind 3-11:1.0 to
btusb driver.
Chunyan Liu (6):
libxl: export some functions for pvusb use
libxl_utils: add internal function to read sysfs file contents
refactor DEFINE_DEVICE_REMOVE to fit for more device types
libxl: add pvusb API
domcreate: support pvusb in configuration file
xl: add pvusb commands
docs/man/xl.cfg.pod.5 | 84 ++
docs/man/xl.pod.1 | 37 +
tools/libxl/Makefile | 2 +-
tools/libxl/libxl.c | 41 +-
tools/libxl/libxl.h | 77 ++
tools/libxl/libxl_create.c | 73 +-
tools/libxl/libxl_device.c | 17 +-
tools/libxl/libxl_internal.h | 37 +-
tools/libxl/libxl_osdeps.h | 13 +
tools/libxl/libxl_pvusb.c | 1559 ++++++++++++++++++++++++++++++++++
tools/libxl/libxl_types.idl | 46 +
tools/libxl/libxl_types_internal.idl | 1 +
tools/libxl/libxl_utils.c | 92 ++
tools/libxl/libxl_utils.h | 5 +
tools/libxl/xl.h | 5 +
tools/libxl/xl_cmdimpl.c | 297 ++++++-
tools/libxl/xl_cmdtable.c | 25 +
17 files changed, 2391 insertions(+), 20 deletions(-)
create mode 100644 tools/libxl/libxl_pvusb.c
--
2.1.4
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH V14 1/6] libxl: export some functions for pvusb use
2016-02-19 10:39 [PATCH V14 0/6] xen pvusb toolstack work Chunyan Liu
@ 2016-02-19 10:39 ` Chunyan Liu
2016-02-19 10:39 ` [PATCH V14 2/6] libxl_utils: add internal function to read sysfs file contents Chunyan Liu
` (4 subsequent siblings)
5 siblings, 0 replies; 12+ messages in thread
From: Chunyan Liu @ 2016-02-19 10:39 UTC (permalink / raw)
To: xen-devel
Cc: jgross, olaf, wei.liu2, ian.campbell, george.dunlap, Ian.Jackson,
Chunyan Liu, jfehlig, Simon Cao
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Simon Cao <caobosimon@gmail.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
---
tools/libxl/libxl.c | 5 ++---
tools/libxl/libxl_internal.h | 3 +++
2 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/tools/libxl/libxl.c b/tools/libxl/libxl.c
index c451b65..98743cd 100644
--- a/tools/libxl/libxl.c
+++ b/tools/libxl/libxl.c
@@ -2031,7 +2031,7 @@ out:
}
/* common function to get next device id */
-static int libxl__device_nextid(libxl__gc *gc, uint32_t domid, char *device)
+int libxl__device_nextid(libxl__gc *gc, uint32_t domid, char *device)
{
char *dompath, **l;
unsigned int nb;
@@ -2050,8 +2050,7 @@ static int libxl__device_nextid(libxl__gc *gc, uint32_t domid, char *device)
return nextid;
}
-static int libxl__resolve_domid(libxl__gc *gc, const char *name,
- uint32_t *domid)
+int libxl__resolve_domid(libxl__gc *gc, const char *name, uint32_t *domid)
{
if (!name)
return 0;
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index c1290b2..f61810d 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -1180,6 +1180,9 @@ _hidden int libxl__init_console_from_channel(libxl__gc *gc,
libxl__device_console *console,
int dev_num,
libxl_device_channel *channel);
+_hidden int libxl__device_nextid(libxl__gc *gc, uint32_t domid, char *device);
+_hidden int libxl__resolve_domid(libxl__gc *gc, const char *name,
+ uint32_t *domid);
/*
* For each aggregate type which can be used as an input we provide:
--
2.1.4
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH V14 2/6] libxl_utils: add internal function to read sysfs file contents
2016-02-19 10:39 [PATCH V14 0/6] xen pvusb toolstack work Chunyan Liu
2016-02-19 10:39 ` [PATCH V14 1/6] libxl: export some functions for pvusb use Chunyan Liu
@ 2016-02-19 10:39 ` Chunyan Liu
2016-02-19 10:39 ` [PATCH V14 3/6] refactor DEFINE_DEVICE_REMOVE to fit for more device types Chunyan Liu
` (3 subsequent siblings)
5 siblings, 0 replies; 12+ messages in thread
From: Chunyan Liu @ 2016-02-19 10:39 UTC (permalink / raw)
To: xen-devel
Cc: jgross, olaf, wei.liu2, ian.campbell, george.dunlap, Ian.Jackson,
Chunyan Liu, jfehlig
Add a new function libxl_read_sysfs_file_contents to handle sysfs file
specially. It would be used in later pvusb work.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Acked-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
---
tools/libxl/libxl_internal.h | 4 +++
tools/libxl/libxl_utils.c | 74 ++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 78 insertions(+)
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index f61810d..10eb9fd 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -4037,6 +4037,10 @@ void libxl__bitmap_copy_best_effort(libxl__gc *gc, libxl_bitmap *dptr,
int libxl__count_physical_sockets(libxl__gc *gc, int *sockets);
+_hidden int libxl__read_sysfs_file_contents(libxl__gc *gc,
+ const char *filename,
+ void **data_r,
+ int *datalen_r);
#define LIBXL_QEMU_USER_PREFIX "xen-qemuuser"
#define LIBXL_QEMU_USER_BASE LIBXL_QEMU_USER_PREFIX"-domid"
diff --git a/tools/libxl/libxl_utils.c b/tools/libxl/libxl_utils.c
index e42422a..e64f301 100644
--- a/tools/libxl/libxl_utils.c
+++ b/tools/libxl/libxl_utils.c
@@ -396,6 +396,80 @@ int libxl_read_file_contents(libxl_ctx *ctx, const char *filename,
return e;
}
+int libxl__read_sysfs_file_contents(libxl__gc *gc, const char *filename,
+ void **data_r, int *datalen_r)
+{
+ FILE *f = 0;
+ uint8_t *data = 0;
+ int datalen = 0;
+ int e;
+ struct stat stab;
+ ssize_t rs;
+
+ f = fopen(filename, "r");
+ if (!f) {
+ if (errno == ENOENT) return ENOENT;
+ LOGE(ERROR, "failed to open %s", filename);
+ goto xe;
+ }
+
+ if (fstat(fileno(f), &stab)) {
+ LOGE(ERROR, "failed to fstat %s", filename);
+ goto xe;
+ }
+
+ if (!S_ISREG(stab.st_mode)) {
+ LOGE(ERROR, "%s is not a plain file", filename);
+ errno = ENOTTY;
+ goto xe;
+ }
+
+ if (stab.st_size > INT_MAX) {
+ LOG(ERROR, "file %s is far too large", filename);
+ errno = EFBIG;
+ goto xe;
+ }
+
+ datalen = stab.st_size;
+
+ if (stab.st_size && data_r) {
+ data = libxl__malloc(gc, datalen);
+
+ /* For sysfs file, datalen is always PAGE_SIZE. 'read'
+ * will return the number of bytes of the actual content,
+ * rs <= datalen is expected.
+ */
+ rs = fread(data, 1, datalen, f);
+ if (rs < datalen) {
+ if (ferror(f)) {
+ LOGE(ERROR, "failed to read %s", filename);
+ goto xe;
+ }
+
+ datalen = rs;
+ data = libxl__realloc(gc, data, datalen);
+ }
+ }
+
+ if (fclose(f)) {
+ f = 0;
+ LOGE(ERROR, "failed to close %s", filename);
+ goto xe;
+ }
+
+ if (data_r) *data_r = data;
+ if (datalen_r) *datalen_r = datalen;
+
+ return 0;
+
+ xe:
+ e = errno;
+ assert(e != ENOENT);
+ if (f) fclose(f);
+ return e;
+}
+
+
#define READ_WRITE_EXACTLY(rw, zero_is_eof, constdata) \
\
int libxl_##rw##_exactly(libxl_ctx *ctx, int fd, \
--
2.1.4
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH V14 3/6] refactor DEFINE_DEVICE_REMOVE to fit for more device types
2016-02-19 10:39 [PATCH V14 0/6] xen pvusb toolstack work Chunyan Liu
2016-02-19 10:39 ` [PATCH V14 1/6] libxl: export some functions for pvusb use Chunyan Liu
2016-02-19 10:39 ` [PATCH V14 2/6] libxl_utils: add internal function to read sysfs file contents Chunyan Liu
@ 2016-02-19 10:39 ` Chunyan Liu
2016-02-19 10:39 ` [PATCH V14 4/6] libxl: add pvusb API Chunyan Liu
` (2 subsequent siblings)
5 siblings, 0 replies; 12+ messages in thread
From: Chunyan Liu @ 2016-02-19 10:39 UTC (permalink / raw)
To: xen-devel
Cc: jgross, olaf, wei.liu2, ian.campbell, george.dunlap, Ian.Jackson,
Chunyan Liu, George Dunlap, jfehlig
For some device type, device removal operation needs to be
handled specially, like usbctrl, it needs to remove all usb
devices under it first, then remove usbctrl. Extend
DEFINE_DEVICE_REMOVE to support generic and custom way
For those need to be handled specially, call
DEFINE_DEVICE_REMOVE_CUSTOM, it requires user defined
libxl__initiate_device_##type##_remove. Otherwise, just
call DEFINE_DEVICE_REMOVE as before.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
---
Address Olaf's suggestion:
* split from "libxl: add pvusb API" patch, since it is common
refactor work, not pvusb specific.
tools/libxl/libxl.c | 18 +++++++++++++-----
tools/libxl/libxl_device.c | 10 +++++-----
tools/libxl/libxl_internal.h | 4 ++--
3 files changed, 20 insertions(+), 12 deletions(-)
diff --git a/tools/libxl/libxl.c b/tools/libxl/libxl.c
index 98743cd..f385134 100644
--- a/tools/libxl/libxl.c
+++ b/tools/libxl/libxl.c
@@ -3199,7 +3199,7 @@ void libxl__device_disk_local_initiate_detach(libxl__egc *egc,
aodev->dev = device;
aodev->callback = local_device_detach_cb;
aodev->force = 0;
- libxl__initiate_device_remove(egc, aodev);
+ libxl__initiate_device_generic_remove(egc, aodev);
return;
}
@@ -4168,7 +4168,7 @@ out:
* libxl_device_vfb_remove
* libxl_device_vfb_destroy
*/
-#define DEFINE_DEVICE_REMOVE(type, removedestroy, f) \
+#define DEFINE_DEVICE_REMOVE_EXT(type, remtype, removedestroy, f) \
int libxl_device_##type##_##removedestroy(libxl_ctx *ctx, \
uint32_t domid, libxl_device_##type *type, \
const libxl_asyncop_how *ao_how) \
@@ -4188,13 +4188,19 @@ out:
aodev->dev = device; \
aodev->callback = device_addrm_aocomplete; \
aodev->force = f; \
- libxl__initiate_device_remove(egc, aodev); \
+ libxl__initiate_device_##remtype##_remove(egc, aodev); \
\
out: \
- if (rc) return AO_CREATE_FAIL(rc); \
+ if (rc) return AO_CREATE_FAIL(rc); \
return AO_INPROGRESS; \
}
+#define DEFINE_DEVICE_REMOVE(type, removedestroy, f) \
+ DEFINE_DEVICE_REMOVE_EXT(type, generic, removedestroy, f)
+
+#define DEFINE_DEVICE_REMOVE_CUSTOM(type, removedestroy, f) \
+ DEFINE_DEVICE_REMOVE_EXT(type, type, removedestroy, f)
+
/* Define all remove/destroy functions and undef the macro */
/* disk */
@@ -4223,6 +4229,8 @@ DEFINE_DEVICE_REMOVE(vtpm, destroy, 1)
* 2. dynamically add/remove qemu chardevs via qmp messages. */
#undef DEFINE_DEVICE_REMOVE
+#undef DEFINE_DEVICE_REMOVE_CUSTOM
+#undef DEFINE_DEVICE_REMOVE_EXT
/******************************************************************************/
@@ -4427,7 +4435,7 @@ static int remove_device(libxl__egc *egc, libxl__ao *ao,
aodev->dev = dev;
aodev->action = LIBXL__DEVICE_ACTION_REMOVE;
aodev->callback = device_complete;
- libxl__initiate_device_remove(egc, aodev);
+ libxl__initiate_device_generic_remove(egc, aodev);
break;
case LIBXL__DEVICE_KIND_QDISK:
if (--dguest->num_qdisks == 0) {
diff --git a/tools/libxl/libxl_device.c b/tools/libxl/libxl_device.c
index 8bb5e93..a356e2a 100644
--- a/tools/libxl/libxl_device.c
+++ b/tools/libxl/libxl_device.c
@@ -676,7 +676,7 @@ void libxl__devices_destroy(libxl__egc *egc, libxl__devices_remove_state *drs)
aodev->action = LIBXL__DEVICE_ACTION_REMOVE;
aodev->dev = dev;
aodev->force = drs->force;
- libxl__initiate_device_remove(egc, aodev);
+ libxl__initiate_device_generic_remove(egc, aodev);
}
}
}
@@ -775,8 +775,8 @@ out:
return;
}
-void libxl__initiate_device_remove(libxl__egc *egc,
- libxl__ao_device *aodev)
+void libxl__initiate_device_generic_remove(libxl__egc *egc,
+ libxl__ao_device *aodev)
{
STATE_AO_GC(aodev->ao);
xs_transaction_t t = 0;
@@ -806,7 +806,7 @@ void libxl__initiate_device_remove(libxl__egc *egc,
(info.paused || info.dying || info.shutdown)) {
/*
* TODO: 4.2 Bodge due to QEMU, see comment on top of
- * libxl__initiate_device_remove in libxl_internal.h
+ * libxl__initiate_device_generic_remove in libxl_internal.h
*/
rc = libxl__ev_time_register_rel(ao, &aodev->timeout,
device_qemu_timeout,
@@ -942,7 +942,7 @@ static void device_backend_callback(libxl__egc *egc, libxl__ev_devstate *ds,
!aodev->force) {
LOG(DEBUG, "Timeout reached, initiating forced remove");
aodev->force = 1;
- libxl__initiate_device_remove(egc, aodev);
+ libxl__initiate_device_generic_remove(egc, aodev);
return;
}
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index 10eb9fd..dd8a681 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -2616,8 +2616,8 @@ _hidden void libxl__wait_device_connection(libxl__egc*,
*
* Once finished, aodev->callback will be executed.
*/
-_hidden void libxl__initiate_device_remove(libxl__egc *egc,
- libxl__ao_device *aodev);
+_hidden void libxl__initiate_device_generic_remove(libxl__egc *egc,
+ libxl__ao_device *aodev);
/*
* libxl__get_hotplug_script_info returns the args and env that should
--
2.1.4
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH V14 4/6] libxl: add pvusb API
2016-02-19 10:39 [PATCH V14 0/6] xen pvusb toolstack work Chunyan Liu
` (2 preceding siblings ...)
2016-02-19 10:39 ` [PATCH V14 3/6] refactor DEFINE_DEVICE_REMOVE to fit for more device types Chunyan Liu
@ 2016-02-19 10:39 ` Chunyan Liu
2016-02-23 17:10 ` George Dunlap
2016-02-19 10:39 ` [PATCH V14 5/6] domcreate: support pvusb in configuration file Chunyan Liu
2016-02-19 10:39 ` [PATCH V14 6/6] xl: add pvusb commands Chunyan Liu
5 siblings, 1 reply; 12+ messages in thread
From: Chunyan Liu @ 2016-02-19 10:39 UTC (permalink / raw)
To: xen-devel
Cc: jgross, olaf, wei.liu2, ian.campbell, george.dunlap, Ian.Jackson,
Chunyan Liu, George Dunlap, jfehlig, Simon Cao
Add pvusb APIs, including:
- attach/detach (create/destroy) virtual usb controller.
- attach/detach usb device
- list usb controller and usb devices
- some other helper functions
Signed-off-by: Simon Cao <caobosimon@gmail.com>
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
---
changes:
Address Olaf's comments:
* move DEFINE_DEVICE_REMOVE changes to a separate patch
Address Ian's comments:
* adjust order of removing xenstore and bind/unbind driver in usb_remove.
* reuse libxl_write_exactly in usbintf_bind/unbind
* several coding style fix
tools/libxl/Makefile | 2 +-
tools/libxl/libxl.c | 18 +
tools/libxl/libxl.h | 77 ++
tools/libxl/libxl_device.c | 5 +-
tools/libxl/libxl_internal.h | 18 +
tools/libxl/libxl_osdeps.h | 13 +
tools/libxl/libxl_pvusb.c | 1567 ++++++++++++++++++++++++++++++++++
tools/libxl/libxl_types.idl | 46 +
tools/libxl/libxl_types_internal.idl | 1 +
tools/libxl/libxl_utils.c | 18 +
tools/libxl/libxl_utils.h | 5 +
11 files changed, 1768 insertions(+), 2 deletions(-)
create mode 100644 tools/libxl/libxl_pvusb.c
diff --git a/tools/libxl/Makefile b/tools/libxl/Makefile
index 620720e..459fc51 100644
--- a/tools/libxl/Makefile
+++ b/tools/libxl/Makefile
@@ -105,7 +105,7 @@ LIBXL_OBJS = flexarray.o libxl.o libxl_create.o libxl_dm.o libxl_pci.o \
libxl_stream_read.o libxl_stream_write.o \
libxl_save_callout.o _libxl_save_msgs_callout.o \
libxl_qmp.o libxl_event.o libxl_fork.o \
- libxl_dom_suspend.o $(LIBXL_OBJS-y)
+ libxl_dom_suspend.o libxl_pvusb.o $(LIBXL_OBJS-y)
LIBXL_OBJS += libxl_genid.o
LIBXL_OBJS += _libxl_types.o libxl_flask.o _libxl_types_internal.o
diff --git a/tools/libxl/libxl.c b/tools/libxl/libxl.c
index f385134..aa879d2 100644
--- a/tools/libxl/libxl.c
+++ b/tools/libxl/libxl.c
@@ -4167,6 +4167,8 @@ out:
* libxl_device_vkb_destroy
* libxl_device_vfb_remove
* libxl_device_vfb_destroy
+ * libxl_device_usbctrl_remove
+ * libxl_device_usbctrl_destroy
*/
#define DEFINE_DEVICE_REMOVE_EXT(type, remtype, removedestroy, f) \
int libxl_device_##type##_##removedestroy(libxl_ctx *ctx, \
@@ -4224,6 +4226,10 @@ DEFINE_DEVICE_REMOVE(vfb, destroy, 1)
DEFINE_DEVICE_REMOVE(vtpm, remove, 0)
DEFINE_DEVICE_REMOVE(vtpm, destroy, 1)
+/* usbctrl */
+DEFINE_DEVICE_REMOVE_CUSTOM(usbctrl, remove, 0)
+DEFINE_DEVICE_REMOVE_CUSTOM(usbctrl, destroy, 1)
+
/* channel/console hotunplug is not implemented. There are 2 possibilities:
* 1. add support for secondary consoles to xenconsoled
* 2. dynamically add/remove qemu chardevs via qmp messages. */
@@ -4239,6 +4245,8 @@ DEFINE_DEVICE_REMOVE(vtpm, destroy, 1)
* libxl_device_disk_add
* libxl_device_nic_add
* libxl_device_vtpm_add
+ * libxl_device_usbctrl_add
+ * libxl_device_usbdev_add
*/
#define DEFINE_DEVICE_ADD(type) \
@@ -4270,6 +4278,12 @@ DEFINE_DEVICE_ADD(nic)
/* vtpm */
DEFINE_DEVICE_ADD(vtpm)
+/* usbctrl */
+DEFINE_DEVICE_ADD(usbctrl)
+
+/* usb */
+DEFINE_DEVICE_ADD(usbdev)
+
#undef DEFINE_DEVICE_ADD
/******************************************************************************/
@@ -6815,6 +6829,10 @@ int libxl_retrieve_domain_configuration(libxl_ctx *ctx, uint32_t domid,
MERGE(pci, pcidevs, COMPARE_PCI, {});
+ MERGE(usbctrl, usbctrls, COMPARE_USBCTRL, {});
+
+ MERGE(usbdev, usbdevs, COMPARE_USB, {});
+
/* Take care of removable device. We maintain invariant in the
* insert / remove operation so that:
* 1. if xenstore is "empty" while JSON is not, the result
diff --git a/tools/libxl/libxl.h b/tools/libxl/libxl.h
index ea7a4b8..e72d001 100644
--- a/tools/libxl/libxl.h
+++ b/tools/libxl/libxl.h
@@ -123,6 +123,12 @@
#define LIBXL_HAVE_DOMAIN_NODEAFFINITY 1
/*
+ * LIBXL_HAVE_PVUSB indicates functions for plugging in USB devices
+ * through pvusb -- both hotplug and at domain creation time..
+ */
+#define LIBXL_HAVE_PVUSB 1
+
+/*
* LIBXL_HAVE_BUILDINFO_HVM_VENDOR_DEVICE indicates that the
* libxl_vendor_device field is present in the hvm sections of
* libxl_domain_build_info. This field tells libxl which
@@ -1517,6 +1523,77 @@ int libxl_cdrom_insert(libxl_ctx *ctx, uint32_t domid, libxl_device_disk *disk,
const libxl_asyncop_how *ao_how)
LIBXL_EXTERNAL_CALLERS_ONLY;
+/*
+ * USB
+ *
+ * For each device removed or added, one of these protocols is available:
+ * - PV (i.e., PVUSB)
+ * - DEVICEMODEL (i.e, qemu)
+ *
+ * PV is available for either PV or HVM domains. DEVICEMODEL is only
+ * available for HVM domains. The caller can additionally specify
+ * "AUTO", in which case the library will try to determine the best
+ * protocol automatically.
+ *
+ * At the moment, the only protocol implemented is PV.
+ *
+ * One can add/remove USB controllers to/from guest, and attach/detach USB
+ * devices to/from USB controllers.
+ *
+ * To add USB controllers and USB devices, one can adding USB controllers
+ * first and then attaching USB devices to some USB controller, or adding
+ * USB devices to guest directly, it will automatically create a USB
+ * controller for USB devices to attach.
+ *
+ * To remove USB controllers or USB devices, one can remove USB devices
+ * under USB controller one by one and then remove USB controller, or
+ * remove USB controller directly, it will remove all USB devices under
+ * it automatically.
+ *
+ */
+/* USB Controllers*/
+int libxl_device_usbctrl_add(libxl_ctx *ctx, uint32_t domid,
+ libxl_device_usbctrl *usbctrl,
+ const libxl_asyncop_how *ao_how)
+ LIBXL_EXTERNAL_CALLERS_ONLY;
+
+int libxl_device_usbctrl_remove(libxl_ctx *ctx, uint32_t domid,
+ libxl_device_usbctrl *usbctrl,
+ const libxl_asyncop_how *ao_how)
+ LIBXL_EXTERNAL_CALLERS_ONLY;
+
+int libxl_device_usbctrl_destroy(libxl_ctx *ctx, uint32_t domid,
+ libxl_device_usbctrl *usbctrl,
+ const libxl_asyncop_how *ao_how)
+ LIBXL_EXTERNAL_CALLERS_ONLY;
+
+libxl_device_usbctrl *libxl_device_usbctrl_list(libxl_ctx *ctx,
+ uint32_t domid, int *num);
+
+void libxl_device_usbctrl_list_free(libxl_device_usbctrl *list, int nr);
+
+
+int libxl_device_usbctrl_getinfo(libxl_ctx *ctx, uint32_t domid,
+ libxl_device_usbctrl *usbctrl,
+ libxl_usbctrlinfo *usbctrlinfo);
+
+/* USB Devices */
+
+int libxl_device_usbdev_add(libxl_ctx *ctx, uint32_t domid,
+ libxl_device_usbdev *usbdev,
+ const libxl_asyncop_how *ao_how)
+ LIBXL_EXTERNAL_CALLERS_ONLY;
+
+int libxl_device_usbdev_remove(libxl_ctx *ctx, uint32_t domid,
+ libxl_device_usbdev *usbdev,
+ const libxl_asyncop_how *ao_how)
+ LIBXL_EXTERNAL_CALLERS_ONLY;
+
+libxl_device_usbdev *
+libxl_device_usbdev_list(libxl_ctx *ctx, uint32_t domid, int *num);
+
+void libxl_device_usbdev_list_free(libxl_device_usbdev *list, int nr);
+
/* Network Interfaces */
int libxl_device_nic_add(libxl_ctx *ctx, uint32_t domid, libxl_device_nic *nic,
const libxl_asyncop_how *ao_how)
diff --git a/tools/libxl/libxl_device.c b/tools/libxl/libxl_device.c
index a356e2a..b7a6a13 100644
--- a/tools/libxl/libxl_device.c
+++ b/tools/libxl/libxl_device.c
@@ -676,7 +676,10 @@ void libxl__devices_destroy(libxl__egc *egc, libxl__devices_remove_state *drs)
aodev->action = LIBXL__DEVICE_ACTION_REMOVE;
aodev->dev = dev;
aodev->force = drs->force;
- libxl__initiate_device_generic_remove(egc, aodev);
+ if (dev->backend_kind == LIBXL__DEVICE_KIND_VUSB)
+ libxl__initiate_device_usbctrl_remove(egc, aodev);
+ else
+ libxl__initiate_device_generic_remove(egc, aodev);
}
}
}
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index dd8a681..46272c6 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -2587,6 +2587,14 @@ _hidden void libxl__device_vtpm_add(libxl__egc *egc, uint32_t domid,
libxl_device_vtpm *vtpm,
libxl__ao_device *aodev);
+_hidden void libxl__device_usbctrl_add(libxl__egc *egc, uint32_t domid,
+ libxl_device_usbctrl *usbctrl,
+ libxl__ao_device *aodev);
+
+_hidden void libxl__device_usbdev_add(libxl__egc *egc, uint32_t domid,
+ libxl_device_usbdev *usbdev,
+ libxl__ao_device *aodev);
+
/* Internal function to connect a vkb device */
_hidden int libxl__device_vkb_add(libxl__gc *gc, uint32_t domid,
libxl_device_vkb *vkb);
@@ -2619,6 +2627,13 @@ _hidden void libxl__wait_device_connection(libxl__egc*,
_hidden void libxl__initiate_device_generic_remove(libxl__egc *egc,
libxl__ao_device *aodev);
+_hidden int libxl__device_from_usbctrl(libxl__gc *gc, uint32_t domid,
+ libxl_device_usbctrl *usbctrl,
+ libxl__device *device);
+
+_hidden void libxl__initiate_device_usbctrl_remove(libxl__egc *egc,
+ libxl__ao_device *aodev);
+
/*
* libxl__get_hotplug_script_info returns the args and env that should
* be passed to the hotplug script for the requested device.
@@ -3973,6 +3988,9 @@ static inline void libxl__update_config_vtpm(libxl__gc *gc,
#define COMPARE_PCI(a, b) ((a)->func == (b)->func && \
(a)->bus == (b)->bus && \
(a)->dev == (b)->dev)
+#define COMPARE_USB(a, b) ((a)->ctrl == (b)->ctrl && \
+ (a)->port == (b)->port)
+#define COMPARE_USBCTRL(a, b) ((a)->devid == (b)->devid)
/* DEVICE_ADD
*
diff --git a/tools/libxl/libxl_osdeps.h b/tools/libxl/libxl_osdeps.h
index d9661c9..802c762 100644
--- a/tools/libxl/libxl_osdeps.h
+++ b/tools/libxl/libxl_osdeps.h
@@ -24,6 +24,8 @@
#define _GNU_SOURCE
#if defined(__NetBSD__)
+#define SYSFS_USB_DEV "/sys/bus/usb/devices"
+#define SYSFS_USBBACK_DRIVER "/kern/xen/usb"
#define SYSFS_PCI_DEV "/sys/bus/pci/devices"
#define SYSFS_PCIBACK_DRIVER "/kern/xen/pci"
#define NETBACK_NIC_NAME "xvif%ui%d"
@@ -31,6 +33,8 @@
#elif defined(__OpenBSD__)
#include <util.h>
#elif defined(__linux__)
+#define SYSFS_USB_DEV "/sys/bus/usb/devices"
+#define SYSFS_USBBACK_DRIVER "/sys/bus/usb/drivers/usbback"
#define SYSFS_PCI_DEV "/sys/bus/pci/devices"
#define SYSFS_PCIBACK_DRIVER "/sys/bus/pci/drivers/pciback"
#define NETBACK_NIC_NAME "vif%u.%d"
@@ -38,6 +42,8 @@
#elif defined(__sun__)
#include <stropts.h>
#elif defined(__FreeBSD__)
+#define SYSFS_USB_DEV "/dev/null"
+#define SYSFS_USBBACK_DRIVER "/dev/null"
#define SYSFS_PCI_DEV "/dev/null"
#define SYSFS_PCIBACK_DRIVER "/dev/null"
#define NETBACK_NIC_NAME "xnb%u.%d"
@@ -45,6 +51,13 @@
#include <sys/endian.h>
#endif
+#ifndef SYSFS_USBBACK_DRIVER
+#error define SYSFS_USBBACK_DRIVER for your platform
+#endif
+#ifndef SYSFS_USB_DEV
+#error define SYSFS_USB_DEV for your platform
+#endif
+
#ifndef SYSFS_PCIBACK_DRIVER
#error define SYSFS_PCIBACK_DRIVER for your platform
#endif
diff --git a/tools/libxl/libxl_pvusb.c b/tools/libxl/libxl_pvusb.c
new file mode 100644
index 0000000..3bf5002
--- /dev/null
+++ b/tools/libxl/libxl_pvusb.c
@@ -0,0 +1,1567 @@
+/*
+ * Copyright (C) 2015 SUSE LINUX Products GmbH, Nuernberg, Germany.
+ * Author Chunyan Liu <cyliu@suse.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published
+ * by the Free Software Foundation; version 2.1 only. with the special
+ * exception on linking described in file LICENSE.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ */
+
+#include "libxl_osdeps.h" /* must come before any other headers */
+
+#include "libxl_internal.h"
+#include <inttypes.h>
+
+#define USBBACK_INFO_PATH "/libxl/usbback"
+
+#define USBHUB_CLASS_CODE 9
+
+static int libxl__device_usbctrl_setdefault(libxl__gc *gc, uint32_t domid,
+ libxl_device_usbctrl *usbctrl)
+{
+ int rc;
+ libxl_domain_type domtype = libxl__domain_type(gc, domid);
+
+ if (!usbctrl->version)
+ usbctrl->version = 2;
+
+ if (!usbctrl->ports)
+ usbctrl->ports = 8;
+
+ if (usbctrl->type == LIBXL_USBCTRL_TYPE_AUTO) {
+ if (domtype == LIBXL_DOMAIN_TYPE_PV) {
+ usbctrl->type = LIBXL_USBCTRL_TYPE_PV;
+ } else if (domtype == LIBXL_DOMAIN_TYPE_HVM) {
+ /* FIXME: See if we can detect PV frontend */
+ usbctrl->type = LIBXL_USBCTRL_TYPE_DEVICEMODEL;
+ }
+ }
+
+ rc = libxl__resolve_domid(gc, usbctrl->backend_domname,
+ &usbctrl->backend_domid);
+ return rc;
+}
+
+int libxl__device_from_usbctrl(libxl__gc *gc, uint32_t domid,
+ libxl_device_usbctrl *usbctrl,
+ libxl__device *device)
+{
+ device->backend_devid = usbctrl->devid;
+ device->backend_domid = usbctrl->backend_domid;
+ device->backend_kind = LIBXL__DEVICE_KIND_VUSB;
+ device->devid = usbctrl->devid;
+ device->domid = domid;
+ device->kind = LIBXL__DEVICE_KIND_VUSB;
+
+ return 0;
+}
+
+/* Add usbctrl information to xenstore.
+ *
+ * Adding a usb controller will add a new 'vusb' device in xenstore, and
+ * add corresponding frontend, backend information to it. According to
+ * "update_json", decide wether to update json config file.
+ */
+static int libxl__device_usbctrl_add_xenstore(libxl__gc *gc, uint32_t domid,
+ libxl_device_usbctrl *usbctrl,
+ bool update_json)
+{
+ libxl__device *device;
+ flexarray_t *front;
+ flexarray_t *back;
+ xs_transaction_t t = XBT_NULL;
+ int i, rc;
+ libxl_domain_config d_config;
+ libxl_device_usbctrl usbctrl_saved;
+ libxl__domain_userdata_lock *lock = NULL;
+
+ libxl_domain_config_init(&d_config);
+ libxl_device_usbctrl_init(&usbctrl_saved);
+ libxl_device_usbctrl_copy(CTX, &usbctrl_saved, usbctrl);
+
+ GCNEW(device);
+ rc = libxl__device_from_usbctrl(gc, domid, usbctrl, device);
+ if (rc) goto out;
+
+ front = flexarray_make(gc, 4, 1);
+ back = flexarray_make(gc, 12, 1);
+
+ flexarray_append_pair(back, "frontend-id", GCSPRINTF("%d", domid));
+ flexarray_append_pair(back, "online", "1");
+ flexarray_append_pair(back, "state",
+ GCSPRINTF("%d", XenbusStateInitialising));
+ flexarray_append_pair(back, "type",
+ (char *)libxl_usbctrl_type_to_string(usbctrl->type));
+ flexarray_append_pair(back, "usb-ver", GCSPRINTF("%d", usbctrl->version));
+ flexarray_append_pair(back, "num-ports", GCSPRINTF("%d", usbctrl->ports));
+ flexarray_append_pair(back, "port", "");
+ for (i = 0; i < usbctrl->ports; i++)
+ flexarray_append_pair(back, GCSPRINTF("port/%d", i + 1), "");
+
+ flexarray_append_pair(front, "backend-id",
+ GCSPRINTF("%d", usbctrl->backend_domid));
+ flexarray_append_pair(front, "state",
+ GCSPRINTF("%d", XenbusStateInitialising));
+
+ if (update_json) {
+ lock = libxl__lock_domain_userdata(gc, domid);
+ if (!lock) {
+ rc = ERROR_LOCK_FAIL;
+ goto out;
+ }
+
+ rc = libxl__get_domain_configuration(gc, domid, &d_config);
+ if (rc) goto out;
+
+ DEVICE_ADD(usbctrl, usbctrls, domid, &usbctrl_saved,
+ COMPARE_USBCTRL, &d_config);
+ }
+
+ for (;;) {
+ rc = libxl__xs_transaction_start(gc, &t);
+ if (rc) goto out;
+
+ rc = libxl__device_exists(gc, t, device);
+ if (rc < 0) goto out;
+ if (rc == 1) {
+ /* already exists in xenstore */
+ LOG(ERROR, "device already exists in xenstore");
+ rc = ERROR_DEVICE_EXISTS;
+ goto out;
+ }
+
+ if (update_json) {
+ rc = libxl__set_domain_configuration(gc, domid, &d_config);
+ if (rc) goto out;
+ }
+
+ libxl__device_generic_add(gc, t, device,
+ libxl__xs_kvs_of_flexarray(gc, back, back->count),
+ libxl__xs_kvs_of_flexarray(gc, front, front->count),
+ NULL);
+
+ rc = libxl__xs_transaction_commit(gc, &t);
+ if (!rc) break;
+ if (rc < 0) goto out;
+ }
+
+out:
+ libxl__xs_transaction_abort(gc, &t);
+ if (lock) libxl__unlock_domain_userdata(lock);
+ libxl_device_usbctrl_dispose(&usbctrl_saved);
+ libxl_domain_config_dispose(&d_config);
+ return rc;
+}
+
+/* AO operation to add a usb controller.
+ *
+ * Generally, it does:
+ * 1) fill in necessary usb controler information with default value
+ * 2) write usb controller frontend/backend info to xenstore, update json
+ * config file if necessary.
+ * 3) wait for device connection. PVUSB frontend and backend driver will
+ * probe xenstore paths and build connection between frontend and backend.
+ *
+ * Before calling this function, aodev should be properly filled:
+ * aodev->ao, aodev->callback, aodev->update_json, ...
+ */
+void libxl__device_usbctrl_add(libxl__egc *egc, uint32_t domid,
+ libxl_device_usbctrl *usbctrl,
+ libxl__ao_device *aodev)
+{
+ STATE_AO_GC(aodev->ao);
+ libxl__device *device;
+ int rc;
+
+ rc = libxl__device_usbctrl_setdefault(gc, domid, usbctrl);
+ if (rc < 0) goto out;
+
+ if (usbctrl->devid == -1) {
+ usbctrl->devid = libxl__device_nextid(gc, domid, "vusb");
+ if (usbctrl->devid < 0) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+ }
+
+ if (usbctrl->type != LIBXL_USBCTRL_TYPE_PV) {
+ LOG(ERROR, "Unsupported USB controller type");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rc = libxl__device_usbctrl_add_xenstore(gc, domid, usbctrl,
+ aodev->update_json);
+ if (rc) goto out;
+
+ GCNEW(device);
+ rc = libxl__device_from_usbctrl(gc, domid, usbctrl, device);
+ if (rc) goto out;
+
+ aodev->dev = device;
+ aodev->action = LIBXL__DEVICE_ACTION_ADD;
+ libxl__wait_device_connection(egc, aodev);
+ return;
+
+out:
+ aodev->rc = rc;
+ aodev->callback(egc, aodev);
+ return;
+}
+
+static int libxl__device_usbdev_list_for_usbctrl(libxl__gc *gc, uint32_t domid,
+ libxl_devid usbctrl,
+ libxl_device_usbdev **usbdevs,
+ int *num);
+
+static int libxl__device_usbdev_remove(libxl__gc *gc, uint32_t domid,
+ libxl_device_usbdev *usbdev);
+
+/* AO function to remove a usb controller.
+ *
+ * Generally, it does:
+ * 1) check if the usb controller exists or not
+ * 2) remove all usb devices under controller
+ * 3) remove usb controller information from xenstore
+ *
+ * Before calling this function, aodev should be properly filled:
+ * aodev->ao, aodev->dev, aodev->callback, ...
+ */
+void libxl__initiate_device_usbctrl_remove(libxl__egc *egc,
+ libxl__ao_device *aodev)
+{
+ STATE_AO_GC(aodev->ao);
+ libxl_device_usbdev *usbdevs = NULL;
+ int num_usbdev = 0;
+ int i, rc;
+ uint32_t domid = ao->domid;
+ int usbctrl_devid = aodev->dev->devid;
+ libxl_device_usbctrl usbctrl;
+ libxl_usbctrlinfo usbctrlinfo;
+
+ libxl_device_usbctrl_init(&usbctrl);
+ libxl_usbctrlinfo_init(&usbctrlinfo);
+ usbctrl.devid = usbctrl_devid;
+
+ rc = libxl_device_usbctrl_getinfo(CTX, domid, &usbctrl, &usbctrlinfo);
+ if (rc) goto out;
+
+ if (usbctrlinfo.type != LIBXL_USBCTRL_TYPE_PV) {
+ LOG(ERROR, "Unsupported USB controller type");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ /* Remove usb devices first */
+ rc = libxl__device_usbdev_list_for_usbctrl(gc, domid, usbctrl_devid,
+ &usbdevs, &num_usbdev);
+ if (rc) goto out;
+
+ for (i = 0; i < num_usbdev; i++) {
+ rc = libxl__device_usbdev_remove(gc, domid, &usbdevs[i]);
+ if (rc) {
+ LOG(ERROR, "libxl__device_usbdev_remove failed: controller %d, "
+ "port %d", usbdevs[i].ctrl, usbdevs[i].port);
+ goto out;
+ }
+ }
+
+ libxl_device_usbctrl_dispose(&usbctrl);
+ libxl_usbctrlinfo_dispose(&usbctrlinfo);
+
+ /* Remove usbctrl */
+ libxl__initiate_device_generic_remove(egc, aodev);
+ return;
+
+out:
+ libxl_device_usbctrl_dispose(&usbctrl);
+ libxl_usbctrlinfo_dispose(&usbctrlinfo);
+ aodev->rc = rc;
+ aodev->callback(egc, aodev);
+ return;
+}
+
+static const char *vusb_be_from_xs_fe(libxl__gc *gc, const char *fe_path,
+ uint32_t tgt_domid)
+{
+ const char *be_path;
+ int r;
+ uint32_t be_domid, fe_domid;
+
+ r = libxl__xs_read_checked(gc, XBT_NULL, GCSPRINTF("%s/backend", fe_path),
+ &be_path);
+ if (r || !be_path) return NULL;
+
+ /* Check to see that it has the proper form, and that fe_domid ==
+ * target domid */
+ r = sscanf(be_path, "/local/domain/%d/backend/vusb/%d",
+ &be_domid, &fe_domid);
+
+ if (r != 2 || fe_domid != tgt_domid) {
+ LOG(ERROR, "Malformed backend, refusing to use");
+ return NULL;
+ }
+
+ return be_path;
+}
+
+libxl_device_usbctrl *
+libxl_device_usbctrl_list(libxl_ctx *ctx, uint32_t domid, int *num)
+{
+ GC_INIT(ctx);
+ libxl_device_usbctrl *usbctrls = NULL;
+ char *path = NULL;
+ char **entry = NULL;
+ unsigned int nentries = 0;
+
+ *num = 0;
+
+ path = GCSPRINTF("%s/device/vusb",
+ libxl__xs_get_dompath(gc, domid));
+ entry = libxl__xs_directory(gc, XBT_NULL, path, &nentries);
+
+ if (entry && nentries) {
+ usbctrls = libxl__zalloc(NOGC, sizeof(*usbctrls) * nentries);
+ libxl_device_usbctrl *usbctrl;
+ libxl_device_usbctrl *end = usbctrls + nentries;
+ for (usbctrl = usbctrls;
+ usbctrl < end;
+ usbctrl++, entry++, (*num)++) {
+ const char *tmp, *be_path, *fe_path;
+ int ret;
+
+ libxl_device_usbctrl_init(usbctrl);
+ usbctrl->devid = atoi(*entry);
+
+#define READ_SUBPATH(path, subpath) ({ \
+ ret = libxl__xs_read_checked(gc, XBT_NULL, \
+ GCSPRINTF("%s/" subpath, path), \
+ &tmp); \
+ if (ret) goto out; \
+ (char *)tmp; \
+ })
+
+#define READ_SUBPATH_INT(path, subpath) ({ \
+ ret = libxl__xs_read_checked(gc, XBT_NULL, \
+ GCSPRINTF("%s/" subpath, path), \
+ &tmp); \
+ if (ret) goto out; \
+ tmp ? atoi(tmp) : -1; \
+ })
+
+ fe_path = GCSPRINTF("%s/%s", path, *entry);
+ be_path = vusb_be_from_xs_fe(gc, fe_path, domid);
+ if (!be_path) goto out;
+ usbctrl->backend_domid = READ_SUBPATH_INT(fe_path, "backend-id");
+ usbctrl->version = READ_SUBPATH_INT(be_path, "usb-ver");
+ usbctrl->ports = READ_SUBPATH_INT(be_path, "num-ports");
+ libxl_usbctrl_type_from_string(READ_SUBPATH(be_path, "type"),
+ &usbctrl->type);
+
+#undef READ_SUBPATH
+#undef READ_SUBPATH_INT
+ }
+ }
+
+ GC_FREE;
+ return usbctrls;
+
+out:
+ LOG(ERROR, "Unable to list USB Controllers");
+ libxl_device_usbctrl_list_free(usbctrls, *num);
+ GC_FREE;
+ *num = 0;
+ return NULL;
+}
+
+int libxl_device_usbctrl_getinfo(libxl_ctx *ctx, uint32_t domid,
+ libxl_device_usbctrl *usbctrl,
+ libxl_usbctrlinfo *usbctrlinfo)
+{
+ GC_INIT(ctx);
+ const char *dompath, *fe_path, *be_path, *tmp;
+ int rc;
+
+ usbctrlinfo->devid = usbctrl->devid;
+
+#define READ_SUBPATH(path, subpath) ({ \
+ rc = libxl__xs_read_checked(gc, XBT_NULL, \
+ GCSPRINTF("%s/" subpath, path), \
+ &tmp); \
+ if (rc) goto out; \
+ (char *)tmp; \
+ })
+
+#define READ_SUBPATH_INT(path, subpath) ({ \
+ rc = libxl__xs_read_checked(gc, XBT_NULL, \
+ GCSPRINTF("%s/" subpath, path), \
+ &tmp); \
+ if (rc) goto out; \
+ tmp ? atoi(tmp) : -1; \
+ })
+
+ dompath = libxl__xs_get_dompath(gc, domid);
+ fe_path = GCSPRINTF("%s/device/vusb/%d", dompath, usbctrl->devid);
+ be_path = READ_SUBPATH(fe_path, "backend");
+ usbctrlinfo->backend = libxl__strdup(NOGC, be_path);
+ usbctrlinfo->backend_id = READ_SUBPATH_INT(fe_path, "backend-id");
+ usbctrlinfo->state = READ_SUBPATH_INT(fe_path, "state");
+ usbctrlinfo->evtch = READ_SUBPATH_INT(fe_path, "event-channel");
+ usbctrlinfo->ref_urb = READ_SUBPATH_INT(fe_path, "urb-ring-ref");
+ usbctrlinfo->ref_conn = READ_SUBPATH_INT(fe_path, "urb-ring-ref");
+ tmp = READ_SUBPATH(be_path, "frontend");
+ usbctrlinfo->frontend = libxl__strdup(NOGC, tmp);
+ usbctrlinfo->frontend_id = READ_SUBPATH_INT(be_path, "frontend-id");
+ usbctrlinfo->ports = READ_SUBPATH_INT(be_path, "num-ports");
+ usbctrlinfo->version = READ_SUBPATH_INT(be_path, "usb-ver");;
+ tmp = READ_SUBPATH(be_path, "type");
+ libxl_usbctrl_type_from_string(tmp, &usbctrlinfo->type);
+
+#undef READ_SUBPATH
+#undef READ_SUBPATH_INT
+
+ rc = 0;
+
+out:
+ GC_FREE;
+ return rc;
+}
+
+int libxl_devid_to_device_usbctrl(libxl_ctx *ctx,
+ uint32_t domid,
+ int devid,
+ libxl_device_usbctrl *usbctrl)
+{
+ libxl_device_usbctrl *usbctrls;
+ int nb = 0;
+ int i, rc;
+
+ usbctrls = libxl_device_usbctrl_list(ctx, domid, &nb);
+ if (!usbctrls) return ERROR_FAIL;
+
+ rc = ERROR_FAIL;
+ for (i = 0; i < nb; i++) {
+ if (devid == usbctrls[i].devid) {
+ libxl_device_usbctrl_copy(ctx, usbctrl, &usbctrls[i]);
+ rc = 0;
+ break;
+ }
+ }
+
+ libxl_device_usbctrl_list_free(usbctrls, nb);
+ return rc;
+}
+
+static void *zalloc_dirent(libxl__gc *gc, const char *dirpath)
+{
+ size_t need = offsetof(struct dirent, d_name) +
+ pathconf(dirpath, _PC_NAME_MAX) + 1;
+
+ return libxl__zalloc(gc, need);
+}
+
+static char *usbdev_busaddr_to_busid(libxl__gc *gc, int bus, int addr)
+{
+ DIR *dir;
+ char *busid = NULL;
+ struct dirent *de_buf;
+ struct dirent *de;
+
+ /* invalid hostbus or hostaddr */
+ if (bus < 1 || addr < 1)
+ return NULL;
+
+ dir = opendir(SYSFS_USB_DEV);
+ if (!dir) {
+ LOGE(ERROR, "opendir failed: '%s'", SYSFS_USB_DEV);
+ return NULL;
+ }
+
+ de_buf = zalloc_dirent(gc, SYSFS_USB_DEV);
+
+ for (;;) {
+ char *filename;
+ void *buf;
+ int busnum = -1;
+ int devnum = -1;
+
+ int r = readdir_r(dir, de_buf, &de);
+ if (r) {
+ LOGE(ERROR, "failed to readdir %s", SYSFS_USB_DEV);
+ break;
+ }
+ if (!de)
+ break;
+
+ if (!strcmp(de->d_name, ".") ||
+ !strcmp(de->d_name, ".."))
+ continue;
+
+ filename = GCSPRINTF(SYSFS_USB_DEV "/%s/devnum", de->d_name);
+ if (!libxl__read_sysfs_file_contents(gc, filename, &buf, NULL))
+ devnum = atoi(buf);
+
+ filename = GCSPRINTF(SYSFS_USB_DEV "/%s/busnum", de->d_name);
+ if (!libxl__read_sysfs_file_contents(gc, filename, &buf, NULL))
+ busnum = atoi(buf);
+
+ if (bus == busnum && addr == devnum) {
+ busid = libxl__strdup(gc, de->d_name);
+ break;
+ }
+ }
+
+ closedir(dir);
+ return busid;
+}
+
+static int usbdev_busaddr_from_busid(libxl__gc *gc, const char *busid,
+ uint8_t *bus, uint8_t *addr)
+{
+ char *filename;
+ void *buf;
+
+ filename = GCSPRINTF(SYSFS_USB_DEV "/%s/busnum", busid);
+ if (!libxl__read_sysfs_file_contents(gc, filename, &buf, NULL))
+ *bus = atoi(buf);
+ else
+ return ERROR_FAIL;
+
+ filename = GCSPRINTF(SYSFS_USB_DEV "/%s/devnum", busid);
+ if (!libxl__read_sysfs_file_contents(gc, filename, &buf, NULL))
+ *addr = atoi(buf);
+ else
+ return ERROR_FAIL;
+
+ return 0;
+}
+
+static int get_assigned_devices(libxl__gc *gc,
+ libxl_device_usbdev **list, int *num)
+{
+ char **domlist;
+ unsigned int ndom = 0;
+ int i, j, k;
+ int rc;
+
+ *list = NULL;
+ *num = 0;
+
+ domlist = libxl__xs_directory(gc, XBT_NULL, "/local/domain", &ndom);
+ for (i = 0; i < ndom; i++) {
+ char *path;
+ char **usbctrls;
+ unsigned int nc = 0;
+ uint32_t domid = atoi(domlist[i]);
+
+ path = GCSPRINTF("%s/device/vusb", libxl__xs_get_dompath(gc, domid));
+ usbctrls = libxl__xs_directory(gc, XBT_NULL, path, &nc);
+
+ for (j = 0; j < nc; j++) {
+ libxl_device_usbdev *tmp = NULL;
+ int nd = 0;
+
+ rc = libxl__device_usbdev_list_for_usbctrl(gc, domid,
+ atoi(usbctrls[j]),
+ &tmp, &nd);
+ if (rc) goto out;
+
+ if (!nd) continue;
+
+ GCREALLOC_ARRAY(*list, *num + nd);
+ for (k = 0; k < nd; k++) {
+ libxl_device_usbdev_copy(CTX, *list + *num, tmp + k);
+ (*num)++;
+ }
+ }
+ }
+
+ return 0;
+
+out:
+ LOG(ERROR, "fail to get assigned devices");
+ return rc;
+}
+
+static bool is_usbdev_in_array(libxl_device_usbdev *usbdevs, int num,
+ libxl_device_usbdev *usbdev)
+{
+ int i;
+
+ for (i = 0; i < num; i++) {
+ if (usbdevs[i].u.hostdev.hostbus == usbdev->u.hostdev.hostbus &&
+ usbdevs[i].u.hostdev.hostaddr == usbdev->u.hostdev.hostaddr)
+ return true;
+ }
+
+ return false;
+}
+
+/* check if USB device type is assignable */
+static bool is_usbdev_assignable(libxl__gc *gc, libxl_device_usbdev *usbdev)
+{
+ int classcode;
+ char *filename;
+ void *buf = NULL;
+ char *busid = NULL;
+
+ busid = usbdev_busaddr_to_busid(gc, usbdev->u.hostdev.hostbus,
+ usbdev->u.hostdev.hostaddr);
+ if (!busid) return false;
+
+ filename = GCSPRINTF(SYSFS_USB_DEV "/%s/bDeviceClass", busid);
+ if (libxl__read_sysfs_file_contents(gc, filename, &buf, NULL))
+ return false;
+
+ classcode = atoi(buf);
+ return classcode != USBHUB_CLASS_CODE;
+}
+
+/* get usb devices under certain usb controller */
+static int
+libxl__device_usbdev_list_for_usbctrl(libxl__gc *gc,
+ uint32_t domid,
+ libxl_devid usbctrl,
+ libxl_device_usbdev **usbdevs,
+ int *num)
+{
+ const char *fe_path, *be_path, *num_devs;
+ int n, i, rc;
+
+ *usbdevs = NULL;
+ *num = 0;
+
+ fe_path = GCSPRINTF("%s/device/vusb/%d",
+ libxl__xs_get_dompath(gc, domid), usbctrl);
+
+ be_path = vusb_be_from_xs_fe(gc, fe_path, domid);
+ if (!be_path) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rc = libxl__xs_read_checked(gc, XBT_NULL,
+ GCSPRINTF("%s/num-ports", be_path),
+ &num_devs);
+ if (rc) goto out;
+
+ n = num_devs ? atoi(num_devs) : 0;
+
+ for (i = 0; i < n; i++) {
+ const char *busid;
+ libxl_device_usbdev *usbdev;
+
+ rc = libxl__xs_read_checked(gc, XBT_NULL,
+ GCSPRINTF("%s/port/%d", be_path, i + 1),
+ &busid);
+ if (rc) goto out;
+
+ if (busid && strcmp(busid, "")) {
+ GCREALLOC_ARRAY(*usbdevs, *num + 1);
+ usbdev = *usbdevs + *num;
+ (*num)++;
+ libxl_device_usbdev_init(usbdev);
+ usbdev->ctrl = usbctrl;
+ usbdev->port = i + 1;
+ usbdev->type = LIBXL_USBDEV_TYPE_HOSTDEV;
+ rc = usbdev_busaddr_from_busid(gc, busid,
+ &usbdev->u.hostdev.hostbus,
+ &usbdev->u.hostdev.hostaddr);
+ if (rc) goto out;
+ }
+ }
+
+ rc = 0;
+
+out:
+ return rc;
+}
+
+/* get all usb devices of the domain */
+libxl_device_usbdev *
+libxl_device_usbdev_list(libxl_ctx *ctx, uint32_t domid, int *num)
+{
+ GC_INIT(ctx);
+ libxl_device_usbdev *usbdevs = NULL;
+ const char *path;
+ char **usbctrls;
+ unsigned int nc = 0;
+ int i, j;
+
+ *num = 0;
+
+ path = GCSPRINTF("%s/device/vusb",
+ libxl__xs_get_dompath(gc, domid));
+ usbctrls = libxl__xs_directory(gc, XBT_NULL, path, &nc);
+
+ for (i = 0; i < nc; i++) {
+ int r, nd = 0;
+ libxl_device_usbdev *tmp = NULL;
+
+ r = libxl__device_usbdev_list_for_usbctrl(gc, domid,
+ atoi(usbctrls[i]),
+ &tmp, &nd);
+ if (!r || !nd) continue;
+
+ usbdevs = libxl__realloc(NOGC, usbdevs,
+ sizeof(*usbdevs) * (*num + nd));
+ for (j = 0; j < nd; j++) {
+ libxl_device_usbdev_copy(ctx, usbdevs + *num, tmp + j);
+ (*num)++;
+ }
+ }
+
+ GC_FREE;
+ return usbdevs;
+}
+
+/* find first unused controller:port and give that to usb device */
+static int
+libxl__device_usbdev_set_default_usbctrl(libxl__gc *gc, uint32_t domid,
+ libxl_device_usbdev *usbdev)
+{
+ libxl_device_usbctrl *usbctrls = NULL;
+ int numctrl = 0;
+ int i, j, rc;
+
+ usbctrls = libxl_device_usbctrl_list(CTX, domid, &numctrl);
+ if (!numctrl || !usbctrls) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ for (i = 0; i < numctrl; i++) {
+ for (j = 0; j < usbctrls[i].ports; j++) {
+ const char *path, *tmp;
+
+ path = GCSPRINTF("%s/backend/vusb/%d/%d/port/%d",
+ libxl__xs_get_dompath(gc, LIBXL_TOOLSTACK_DOMID),
+ domid, usbctrls[i].devid, j + 1);
+ rc = libxl__xs_read_checked(gc, XBT_NULL, path, &tmp);
+ if (rc) goto out;
+
+ if (tmp && !strcmp(tmp, "")) {
+ usbdev->ctrl = usbctrls[i].devid;
+ usbdev->port = j + 1;
+ rc = 0;
+ goto out;
+ }
+ }
+ }
+
+ /* no available controller:port */
+ rc = ERROR_FAIL;
+
+out:
+ libxl_device_usbctrl_list_free(usbctrls, numctrl);
+ return rc;
+}
+
+/* Fill in usb information with default value.
+ *
+ * Generally, it does:
+ * 1) if "controller" is not specified:
+ * - if "port" is not specified, try to find an available controller:port,
+ * if found, use that; otherwise, create a new controller, use this
+ * controller and its first port
+ * - if "port" is specified, report error.
+ * 2) if "controller" is specified, but port is not specified:
+ * try to find an available port under this controller, if found, use
+ * that, otherwise, report error.
+ * 3) if both "controller" and "port" are specified:
+ * check the controller:port is available, if not, report error.
+ */
+static int libxl__device_usbdev_setdefault(libxl__gc *gc,
+ uint32_t domid,
+ libxl_device_usbdev *usbdev,
+ bool update_json)
+{
+ int rc;
+
+ if (!usbdev->type)
+ usbdev->type = LIBXL_USBDEV_TYPE_HOSTDEV;
+
+ if (usbdev->ctrl == -1) {
+ if (usbdev->port) {
+ LOG(ERROR, "USB controller must be specified if you specify port");
+ return ERROR_INVAL;
+ }
+
+ rc = libxl__device_usbdev_set_default_usbctrl(gc, domid, usbdev);
+ /* If no existing controller to host this usb device, add a new one */
+ if (rc) {
+ libxl_device_usbctrl *usbctrl;
+
+ GCNEW(usbctrl);
+ libxl_device_usbctrl_init(usbctrl);
+ rc = libxl__device_usbctrl_setdefault(gc, domid, usbctrl);
+ if (rc < 0) goto out;
+
+ if (usbctrl->devid == -1) {
+ usbctrl->devid = libxl__device_nextid(gc, domid, "vusb");
+ if (usbctrl->devid < 0) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+ }
+
+ rc = libxl__device_usbctrl_add_xenstore(gc, domid, usbctrl,
+ update_json);
+ if (rc) goto out;
+
+ usbdev->ctrl = usbctrl->devid;
+ usbdev->port = 1;
+ }
+ } else {
+ /* A controller was specified; look it up */
+ const char *fe_path, *be_path, *tmp;
+
+ fe_path = GCSPRINTF("%s/device/vusb/%d",
+ libxl__xs_get_dompath(gc, domid),
+ usbdev->ctrl);
+
+ be_path = vusb_be_from_xs_fe(gc, fe_path, domid);
+ if (!be_path) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ if (usbdev->port) {
+ /* A specific port was requested; see if it's available */
+ rc = libxl__xs_read_checked(gc, XBT_NULL,
+ GCSPRINTF("%s/port/%d",
+ be_path, usbdev->port),
+ &tmp);
+ if (rc) goto out;
+
+ if (tmp && strcmp(tmp, "")) {
+ LOG(ERROR, "The controller port isn't available");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+ } else {
+ /* No port was requested. Choose free port. */
+ int i, ports;
+
+ rc = libxl__xs_read_checked(gc, XBT_NULL,
+ GCSPRINTF("%s/num-ports", be_path), &tmp);
+ if (rc) goto out;
+
+ ports = tmp ? atoi(tmp) : 0;
+
+ for (i = 0; i < ports; i++) {
+ rc = libxl__xs_read_checked(gc, XBT_NULL,
+ GCSPRINTF("%s/port/%d", be_path, i + 1),
+ &tmp);
+ if (rc) goto out;
+
+ if (tmp && !strcmp(tmp, "")) {
+ usbdev->port = i + 1;
+ break;
+ }
+ }
+
+ if (!usbdev->port) {
+ LOG(ERROR, "No available port under specified controller");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+ }
+ }
+
+ rc = 0;
+
+out:
+ return rc;
+}
+
+/* Add usb information to xenstore
+ *
+ * Adding a usb device won't create new 'vusb' device, but only write
+ * the device busid to the controller:port in xenstore.
+ */
+static int libxl__device_usbdev_add_xenstore(libxl__gc *gc, uint32_t domid,
+ libxl_device_usbdev *usbdev,
+ bool update_json)
+{
+ char *be_path, *busid;
+ int rc;
+ xs_transaction_t t = XBT_NULL;
+ libxl_domain_config d_config;
+ libxl_device_usbdev usbdev_saved;
+ libxl__domain_userdata_lock *lock = NULL;
+
+ libxl_domain_config_init(&d_config);
+ libxl_device_usbdev_init(&usbdev_saved);
+ libxl_device_usbdev_copy(CTX, &usbdev_saved, usbdev);
+
+ busid = usbdev_busaddr_to_busid(gc, usbdev->u.hostdev.hostbus,
+ usbdev->u.hostdev.hostaddr);
+ if (!busid) {
+ LOG(DEBUG, "Fail to get busid of usb device");
+ goto out;
+ }
+
+ if (update_json) {
+ lock = libxl__lock_domain_userdata(gc, domid);
+ if (!lock) {
+ rc = ERROR_LOCK_FAIL;
+ goto out;
+ }
+
+ rc = libxl__get_domain_configuration(gc, domid, &d_config);
+ if (rc) goto out;
+
+ DEVICE_ADD(usbdev, usbdevs, domid, &usbdev_saved,
+ COMPARE_USB, &d_config);
+ }
+
+ for (;;) {
+ rc = libxl__xs_transaction_start(gc, &t);
+ if (rc) goto out;
+
+ if (update_json) {
+ rc = libxl__set_domain_configuration(gc, domid, &d_config);
+ if (rc) goto out;
+ }
+
+ be_path = GCSPRINTF("%s/backend/vusb/%d/%d/port/%d",
+ libxl__xs_get_dompath(gc, LIBXL_TOOLSTACK_DOMID),
+ domid, usbdev->ctrl, usbdev->port);
+
+ LOG(DEBUG, "Adding usb device %s to xenstore: controller %d, port %d",
+ busid, usbdev->ctrl, usbdev->port);
+
+ rc = libxl__xs_write_checked(gc, t, be_path, busid);
+ if (rc) goto out;
+
+ rc = libxl__xs_transaction_commit(gc, &t);
+ if (!rc) break;
+ if (rc < 0) goto out;
+ }
+
+ rc = 0;
+
+out:
+ if (lock) libxl__unlock_domain_userdata(lock);
+ libxl_device_usbdev_dispose(&usbdev_saved);
+ libxl_domain_config_dispose(&d_config);
+ return rc;
+}
+
+static int libxl__device_usbdev_remove_xenstore(libxl__gc *gc, uint32_t domid,
+ libxl_device_usbdev *usbdev)
+{
+ char *be_path;
+
+ be_path = GCSPRINTF("%s/backend/vusb/%d/%d/port/%d",
+ libxl__xs_get_dompath(gc, LIBXL_TOOLSTACK_DOMID),
+ domid, usbdev->ctrl, usbdev->port);
+
+ LOG(DEBUG, "Removing usb device from xenstore: controller %d, port %d",
+ usbdev->ctrl, usbdev->port);
+
+ return libxl__xs_write_checked(gc, XBT_NULL, be_path, "");
+}
+
+static char *usbdev_busid_from_ctrlport(libxl__gc *gc, uint32_t domid,
+ libxl_device_usbdev *usbdev)
+{
+ return libxl__xs_read(gc, XBT_NULL,
+ GCSPRINTF("%s/backend/vusb/%d/%d/port/%d",
+ libxl__xs_get_dompath(gc, LIBXL_TOOLSTACK_DOMID),
+ domid, usbdev->ctrl, usbdev->port));
+}
+
+/* get original driver path of usb interface, stored in @drvpath */
+static int usbintf_get_drvpath(libxl__gc *gc, const char *intf, char **drvpath)
+{
+ char *spath, *dp = NULL;
+ struct stat st;
+ int r;
+
+ spath = GCSPRINTF(SYSFS_USB_DEV "/%s/driver", intf);
+
+ r = lstat(spath, &st);
+ if (r == 0) {
+ /* Find the canonical path to the driver. */
+ dp = libxl__zalloc(gc, PATH_MAX);
+ dp = realpath(spath, dp);
+ if (!dp) {
+ LOGE(ERROR, "get realpath failed: '%s'", spath);
+ return ERROR_FAIL;
+ }
+ } else if (errno == ENOENT) {
+ /* driver path doesn't exist */
+ dp = NULL;
+ } else {
+ LOGE(ERROR, "lstat failed: '%s'", spath);
+ return ERROR_FAIL;
+ }
+
+ *drvpath = dp;
+
+ return 0;
+}
+
+static int unbind_usbintf(libxl__gc *gc, const char *intf)
+{
+ char *path;
+ int fd = -1;
+ int rc;
+
+ path = GCSPRINTF(SYSFS_USB_DEV "/%s/driver/unbind", intf);
+
+ fd = open(path, O_WRONLY);
+ if (fd < 0) {
+ LOGE(ERROR, "open file failed: '%s'", path);
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ if (libxl_write_exactly(CTX, fd, intf, sizeof(intf), path, intf)) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rc = 0;
+
+out:
+ if (fd >= 0) close(fd);
+ return rc;
+}
+
+static int bind_usbintf(libxl__gc *gc, const char *intf, const char *drvpath)
+{
+ char *path;
+ struct stat st;
+ int fd = -1;
+ int rc, r;
+
+ path = GCSPRINTF("%s/%s", drvpath, intf);
+
+ /* check through lstat, if intf already exists under drvpath,
+ * it's already bound, return directly; if it doesn't exist,
+ * continue to do bind work; otherwise, return error.
+ */
+ r = lstat(path, &st);
+ if (r == 0)
+ return 0;
+ if (r < 0 && errno != ENOENT)
+ return ERROR_FAIL;
+
+ path = GCSPRINTF("%s/bind", drvpath);
+
+ fd = open(path, O_WRONLY);
+ if (fd < 0) {
+ LOGE(ERROR, "open file failed: '%s'", path);
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ if (libxl_write_exactly(CTX, fd, intf, sizeof(intf), path, intf)) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rc = 0;
+
+out:
+ if (fd >= 0) close(fd);
+ return rc;
+}
+
+/* Is usb interface bound to usbback? */
+static int usbintf_is_assigned(libxl__gc *gc, char *intf)
+{
+ char *spath;
+ int r;
+ struct stat st;
+
+ spath = GCSPRINTF(SYSFS_USBBACK_DRIVER "/%s", intf);
+ r = lstat(spath, &st);
+
+ if (r == 0)
+ return 1;
+ if (r < 0 && errno == ENOENT)
+ return 0;
+ LOGE(ERROR, "Accessing %s", spath);
+ return -1;
+}
+
+static int usbdev_get_all_interfaces(libxl__gc *gc, const char *busid,
+ char ***intfs, int *num)
+{
+ DIR *dir;
+ char *buf;
+ struct dirent *de_buf;
+ struct dirent *de;
+ int rc;
+
+ *intfs = NULL;
+ *num = 0;
+
+ buf = GCSPRINTF("%s:", busid);
+
+ dir = opendir(SYSFS_USB_DEV);
+ if (!dir) {
+ LOGE(ERROR, "opendir failed: '%s'", SYSFS_USB_DEV);
+ return ERROR_FAIL;
+ }
+
+ de_buf = zalloc_dirent(gc, SYSFS_USB_DEV);
+
+ for (;;) {
+ int r = readdir_r(dir, de_buf, &de);
+
+ if (r) {
+ LOGE(ERROR, "failed to readdir %s", SYSFS_USB_DEV);
+ rc = ERROR_FAIL;
+ goto out;
+ }
+ if (!de)
+ break;
+
+ if (!strcmp(de->d_name, ".") ||
+ !strcmp(de->d_name, ".."))
+ continue;
+
+ if (!strncmp(de->d_name, buf, strlen(buf))) {
+ GCREALLOC_ARRAY(*intfs, *num + 1);
+ (*intfs)[*num] = libxl__strdup(gc, de->d_name);
+ (*num)++;
+ }
+ }
+
+ rc = 0;
+
+out:
+ closedir(dir);
+ return rc;
+}
+
+/* Encode usb interface so that it could be written to xenstore as a key.
+ *
+ * Since xenstore key cannot include '.' or ':', we'll change '.' to '_',
+ * change ':' to '@'. For example, 3-1:2.1 will be encoded to 3-1@2_1.
+ * This will be used to save original driver of USB device to xenstore.
+ */
+static char *usb_interface_xenstore_encode(libxl__gc *gc, const char *busid)
+{
+ char *str = libxl__strdup(gc, busid);
+ int i, len = strlen(str);
+
+ for (i = 0; i < len; i++) {
+ if (str[i] == '.') str[i] = '_';
+ if (str[i] == ':') str[i] = '@';
+ }
+ return str;
+}
+
+/* Unbind USB device from "usbback" driver.
+ *
+ * If there are many interfaces under USB device, check each interface,
+ * unbind from "usbback" driver and rebind to its original driver.
+ */
+static int usbback_dev_unassign(libxl__gc *gc, const char *busid)
+{
+ char **intfs = NULL;
+ char *usbdev_encode = NULL;
+ char *path = NULL;
+ int i, num = 0;
+ int rc;
+
+ rc = usbdev_get_all_interfaces(gc, busid, &intfs, &num);
+ if (rc) goto out;
+
+ usbdev_encode = usb_interface_xenstore_encode(gc, busid);
+
+ for (i = 0; i < num; i++) {
+ char *intf = intfs[i];
+ char *usbintf_encode = NULL;
+ const char *drvpath;
+
+ /* check if the USB interface is already bound to "usbback" */
+ if (usbintf_is_assigned(gc, intf) > 0) {
+ /* unbind interface from usbback driver */
+ rc = unbind_usbintf(gc, intf);
+ if (rc) {
+ LOGE(ERROR, "Couldn't unbind %s from usbback", intf);
+ goto out;
+ }
+ }
+
+ /* rebind USB interface to its originial driver */
+ usbintf_encode = usb_interface_xenstore_encode(gc, intf);
+ path = GCSPRINTF(USBBACK_INFO_PATH "/%s/%s/driver_path",
+ usbdev_encode, usbintf_encode);
+ rc = libxl__xs_read_checked(gc, XBT_NULL, path, &drvpath);
+ if (rc) goto out;
+
+ if (drvpath) {
+ rc = bind_usbintf(gc, intf, drvpath);
+ if (rc) {
+ LOGE(ERROR, "Couldn't rebind %s to %s", intf, drvpath);
+ goto out;
+ }
+ }
+ }
+
+ /* finally, remove xenstore driver path. */
+ path = GCSPRINTF(USBBACK_INFO_PATH "/%s", usbdev_encode);
+ rc = libxl__xs_rm_checked(gc, XBT_NULL, path);
+
+out:
+ return rc;
+}
+
+/* Bind USB device to "usbback" driver.
+ *
+ * If there are many interfaces under USB device, check each interface,
+ * unbind from original driver and bind to "usbback" driver.
+ */
+static int usbback_dev_assign(libxl__gc *gc, const char *busid)
+{
+ char **intfs = NULL;
+ int num = 0, i;
+ int rc;
+ char *usbdev_encode = NULL;
+
+ rc = usbdev_get_all_interfaces(gc, busid, &intfs, &num);
+ if (rc) return rc;
+
+ usbdev_encode = usb_interface_xenstore_encode(gc, busid);
+
+ for (i = 0; i < num; i++) {
+ char *intf = intfs[i];
+ char *drvpath = NULL;
+
+ /* already assigned to usbback */
+ if (usbintf_is_assigned(gc, intf) > 0)
+ continue;
+
+ rc = usbintf_get_drvpath(gc, intf, &drvpath);
+ if (rc) goto out;
+
+ if (drvpath) {
+ /* write driver path to xenstore for later rebinding */
+ char *usbintf_encode = NULL;
+ char *path;
+
+ usbintf_encode = usb_interface_xenstore_encode(gc, intf);
+ path = GCSPRINTF(USBBACK_INFO_PATH "/%s/%s/driver_path",
+ usbdev_encode, usbintf_encode);
+ rc = libxl__xs_write_checked(gc, XBT_NULL, path, drvpath);
+ if (rc) goto out;
+
+ /* unbind interface from original driver */
+ rc = unbind_usbintf(gc, intf);
+ if (rc) goto out;
+ }
+
+ /* bind interface to usbback */
+ rc = bind_usbintf(gc, intf, SYSFS_USBBACK_DRIVER);
+ if (rc) {
+ LOG(ERROR, "Couldn't bind %s to %s", intf, SYSFS_USBBACK_DRIVER);
+ goto out;
+ }
+ }
+
+ return 0;
+
+out:
+ /* some interfaces might be bound to usbback, unbind it and
+ * rebind it to its original driver
+ */
+ usbback_dev_unassign(gc, busid);
+ return rc;
+}
+
+static int do_usbdev_add(libxl__gc *gc, uint32_t domid,
+ libxl_device_usbdev *usbdev,
+ bool update_json)
+{
+ int rc;
+ char *busid;
+ libxl_device_usbctrl usbctrl;
+ libxl_usbctrlinfo usbctrlinfo;
+
+ libxl_device_usbctrl_init(&usbctrl);
+ libxl_usbctrlinfo_init(&usbctrlinfo);
+ usbctrl.devid = usbdev->ctrl;
+
+ rc = libxl_device_usbctrl_getinfo(CTX, domid, &usbctrl, &usbctrlinfo);
+ if (rc) goto out;
+
+ switch (usbctrlinfo.type) {
+ case LIBXL_USBCTRL_TYPE_PV:
+ busid = usbdev_busaddr_to_busid(gc, usbdev->u.hostdev.hostbus,
+ usbdev->u.hostdev.hostaddr);
+ if (!busid) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rc = libxl__device_usbdev_add_xenstore(gc, domid, usbdev, update_json);
+ if (rc) goto out;
+
+ rc = usbback_dev_assign(gc, busid);
+ if (rc) {
+ libxl__device_usbdev_remove_xenstore(gc, domid, usbdev);
+ goto out;
+ }
+ break;
+ case LIBXL_USBCTRL_TYPE_DEVICEMODEL:
+ default:
+ LOG(ERROR, "Unsupported usb controller type");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rc = 0;
+
+out:
+ libxl_device_usbctrl_dispose(&usbctrl);
+ libxl_usbctrlinfo_dispose(&usbctrlinfo);
+ return rc;
+}
+
+/* AO operation to add a usb device.
+ *
+ * Generally, it does:
+ * 1) check if the usb device type is assignable
+ * 2) check if the usb device is already assigned to a domain
+ * 3) add 'busid' of the usb device to xenstore contoller/port/.
+ * (PVUSB driver watches the xenstore changes and will detect that.)
+ * 4) unbind usb device from original driver and bind to usbback.
+ * If usb device has many interfaces, then:
+ * - unbind each interface from its original driver and bind to usbback.
+ * - store the original driver to xenstore for later rebinding when
+ * detaching the device.
+ *
+ * Before calling this function, aodev should be properly filled:
+ * aodev->ao, aodev->callback, aodev->update_json, ...
+ */
+void libxl__device_usbdev_add(libxl__egc *egc, uint32_t domid,
+ libxl_device_usbdev *usbdev,
+ libxl__ao_device *aodev)
+{
+ STATE_AO_GC(aodev->ao);
+ int rc;
+ libxl_device_usbdev *assigned;
+ int num_assigned;
+ libxl_device_usbctrl usbctrl;
+ libxl_usbctrlinfo usbctrlinfo;
+
+ libxl_device_usbctrl_init(&usbctrl);
+ libxl_usbctrlinfo_init(&usbctrlinfo);
+
+ /* Currently only support adding USB device from Dom0 backend.
+ * So, if USB controller is specified, check its backend domain,
+ * if it's not Dom0, report error.
+ */
+ if (usbdev->ctrl != -1) {
+ usbctrl.devid = usbdev->ctrl;
+ rc = libxl_device_usbctrl_getinfo(CTX, domid, &usbctrl, &usbctrlinfo);
+ if (rc) goto out;
+
+ if (usbctrlinfo.backend_id != LIBXL_TOOLSTACK_DOMID) {
+ LOG(ERROR, "Don't support adding USB device from non-Dom0 backend");
+ rc = ERROR_INVAL;
+ goto out;
+ }
+ }
+
+ /* check usb device is assignable type */
+ if (!is_usbdev_assignable(gc, usbdev)) {
+ LOG(ERROR, "USB device is not assignable.");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ /* check usb device is already assigned */
+ rc = get_assigned_devices(gc, &assigned, &num_assigned);
+ if (rc) {
+ LOG(ERROR, "cannot determine if device is assigned,"
+ " refusing to continue");
+ goto out;
+ }
+
+ if (is_usbdev_in_array(assigned, num_assigned, usbdev)) {
+ LOG(ERROR, "USB device already attached to a domain");
+ rc = ERROR_INVAL;
+ goto out;
+ }
+
+ /* fill default values, e.g, if usbdev->ctrl and usbdev->port
+ * not specified, choose available controller:port and fill in. */
+ rc = libxl__device_usbdev_setdefault(gc, domid, usbdev,
+ aodev->update_json);
+ if (rc) goto out;
+
+ /* do actual adding usb device operation */
+ rc = do_usbdev_add(gc, domid, usbdev, aodev->update_json);
+
+out:
+ libxl_device_usbctrl_dispose(&usbctrl);
+ libxl_usbctrlinfo_dispose(&usbctrlinfo);
+ aodev->rc = rc;
+ aodev->callback(egc, aodev);
+ return;
+}
+
+static int do_usbdev_remove(libxl__gc *gc, uint32_t domid,
+ libxl_device_usbdev *usbdev)
+{
+ int rc;
+ char *busid;
+ libxl_device_usbctrl usbctrl;
+ libxl_usbctrlinfo usbctrlinfo;
+
+ libxl_device_usbctrl_init(&usbctrl);
+ libxl_usbctrlinfo_init(&usbctrlinfo);
+ usbctrl.devid = usbdev->ctrl;
+
+ rc = libxl_device_usbctrl_getinfo(CTX, domid, &usbctrl, &usbctrlinfo);
+ if (rc) goto out;
+
+ switch (usbctrlinfo.type) {
+ case LIBXL_USBCTRL_TYPE_PV:
+ busid = usbdev_busid_from_ctrlport(gc, domid, usbdev);
+ if (!busid) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rc = usbback_dev_unassign(gc, busid);
+ if (rc) goto out;
+
+ rc = libxl__device_usbdev_remove_xenstore(gc, domid, usbdev);
+ if (rc) goto out;
+
+ break;
+ case LIBXL_USBCTRL_TYPE_DEVICEMODEL:
+ default:
+ LOG(ERROR, "Unsupported usb controller type");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rc = 0;
+
+out:
+ libxl_device_usbctrl_dispose(&usbctrl);
+ libxl_usbctrlinfo_dispose(&usbctrlinfo);
+ return rc;
+}
+
+/* Operation to remove usb device.
+ *
+ * Generally, it does:
+ * 1) check if the usb device is assigned to the domain
+ * 2) remove the usb device from xenstore controller/port.
+ * 3) unbind usb device from usbback and rebind to its original driver.
+ * If usb device has many interfaces, do it to each interface.
+ */
+static int libxl__device_usbdev_remove(libxl__gc *gc, uint32_t domid,
+ libxl_device_usbdev *usbdev)
+{
+ libxl_usbctrlinfo usbctrlinfo;
+ libxl_device_usbctrl usbctrl;
+ int rc;
+
+ if (usbdev->ctrl < 0 || usbdev->port < 1) {
+ LOG(ERROR, "Invalid USB device");
+ return ERROR_FAIL;
+ }
+
+ libxl_device_usbctrl_init(&usbctrl);
+ libxl_usbctrlinfo_init(&usbctrlinfo);
+ usbctrl.devid = usbdev->ctrl;
+
+ rc = libxl_device_usbctrl_getinfo(CTX, domid, &usbctrl, &usbctrlinfo);
+ if (rc) goto out;
+
+ if (usbctrlinfo.backend_id != LIBXL_TOOLSTACK_DOMID) {
+ LOG(ERROR, "Don't support removing USB device from non-Dom0 backend");
+ rc = ERROR_INVAL;
+ goto out;
+ }
+
+ /* do actual removing usb device operation */
+ rc = do_usbdev_remove(gc, domid, usbdev);
+
+out:
+ libxl_device_usbctrl_dispose(&usbctrl);
+ libxl_usbctrlinfo_dispose(&usbctrlinfo);
+ return rc;
+}
+
+int libxl_device_usbdev_remove(libxl_ctx *ctx, uint32_t domid,
+ libxl_device_usbdev *usbdev,
+ const libxl_asyncop_how *ao_how)
+
+{
+ AO_CREATE(ctx, domid, ao_how);
+ int rc;
+
+ rc = libxl__device_usbdev_remove(gc, domid, usbdev);
+
+ libxl__ao_complete(egc, ao, rc);
+ return AO_INPROGRESS;
+}
+
+int libxl_ctrlport_to_device_usbdev(libxl_ctx *ctx,
+ uint32_t domid,
+ int ctrl,
+ int port,
+ libxl_device_usbdev *usbdev)
+{
+ GC_INIT(ctx);
+ const char *dompath, *fe_path, *be_path, *busid;
+ int rc;
+
+ dompath = libxl__xs_get_dompath(gc, domid);
+
+ fe_path = GCSPRINTF("%s/device/vusb/%d", dompath, ctrl);
+
+ be_path = vusb_be_from_xs_fe(gc, fe_path, domid);
+ if (!be_path) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rc = libxl__xs_read_checked(gc, XBT_NULL,
+ GCSPRINTF("%s/port/%d", be_path, port),
+ &busid);
+ if (rc) goto out;
+
+ if (!busid || !strcmp(busid, "")) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ usbdev->ctrl = ctrl;
+ usbdev->port = port;
+ usbdev->type = LIBXL_USBDEV_TYPE_HOSTDEV;
+ rc = usbdev_busaddr_from_busid(gc, busid,
+ &usbdev->u.hostdev.hostbus,
+ &usbdev->u.hostdev.hostaddr);
+
+out:
+ GC_FREE;
+ return rc;
+}
+/*
+ * Local variables:
+ * mode: C
+ * c-basic-offset: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
diff --git a/tools/libxl/libxl_types.idl b/tools/libxl/libxl_types.idl
index 9ad7eba..a92ddcc 100644
--- a/tools/libxl/libxl_types.idl
+++ b/tools/libxl/libxl_types.idl
@@ -607,6 +607,35 @@ libxl_device_rdm = Struct("device_rdm", [
("policy", libxl_rdm_reserve_policy),
])
+libxl_usbctrl_type = Enumeration("usbctrl_type", [
+ (0, "AUTO"),
+ (1, "PV"),
+ (2, "DEVICEMODEL"),
+ ])
+
+libxl_usbdev_type = Enumeration("usbdev_type", [
+ (1, "hostdev"),
+ ])
+
+libxl_device_usbctrl = Struct("device_usbctrl", [
+ ("type", libxl_usbctrl_type),
+ ("devid", libxl_devid),
+ ("version", integer),
+ ("ports", integer),
+ ("backend_domid", libxl_domid),
+ ("backend_domname", string),
+ ])
+
+libxl_device_usbdev = Struct("device_usbdev", [
+ ("ctrl", libxl_devid),
+ ("port", integer),
+ ("u", KeyedUnion(None, libxl_usbdev_type, "type",
+ [("hostdev", Struct(None, [
+ ("hostbus", uint8),
+ ("hostaddr", uint8)])),
+ ])),
+ ])
+
libxl_device_dtdev = Struct("device_dtdev", [
("path", string),
])
@@ -645,6 +674,8 @@ libxl_domain_config = Struct("domain_config", [
# a channel manifests as a console with a name,
# see docs/misc/channels.txt
("channels", Array(libxl_device_channel, "num_channels")),
+ ("usbctrls", Array(libxl_device_usbctrl, "num_usbctrls")),
+ ("usbdevs", Array(libxl_device_usbdev, "num_usbdevs")),
("on_poweroff", libxl_action_on_shutdown),
("on_reboot", libxl_action_on_shutdown),
@@ -688,6 +719,21 @@ libxl_vtpminfo = Struct("vtpminfo", [
("uuid", libxl_uuid),
], dir=DIR_OUT)
+libxl_usbctrlinfo = Struct("usbctrlinfo", [
+ ("type", libxl_usbctrl_type),
+ ("devid", libxl_devid),
+ ("version", integer),
+ ("ports", integer),
+ ("backend", string),
+ ("backend_id", uint32),
+ ("frontend", string),
+ ("frontend_id", uint32),
+ ("state", integer),
+ ("evtch", integer),
+ ("ref_urb", integer),
+ ("ref_conn", integer),
+ ], dir=DIR_OUT)
+
libxl_vcpuinfo = Struct("vcpuinfo", [
("vcpuid", uint32),
("cpu", uint32),
diff --git a/tools/libxl/libxl_types_internal.idl b/tools/libxl/libxl_types_internal.idl
index 5e55685..696f5f8 100644
--- a/tools/libxl/libxl_types_internal.idl
+++ b/tools/libxl/libxl_types_internal.idl
@@ -22,6 +22,7 @@ libxl__device_kind = Enumeration("device_kind", [
(6, "VKBD"),
(7, "CONSOLE"),
(8, "VTPM"),
+ (9, "VUSB"),
])
libxl__console_backend = Enumeration("console_backend", [
diff --git a/tools/libxl/libxl_utils.c b/tools/libxl/libxl_utils.c
index e64f301..94dac4e 100644
--- a/tools/libxl/libxl_utils.c
+++ b/tools/libxl/libxl_utils.c
@@ -1311,6 +1311,24 @@ int libxl__random_bytes(libxl__gc *gc, uint8_t *buf, size_t len)
return ret;
}
+void libxl_device_usbctrl_list_free(libxl_device_usbctrl *list, int nr)
+{
+ int i;
+
+ for (i = 0; i < nr; i++)
+ libxl_device_usbctrl_dispose(&list[i]);
+ free(list);
+}
+
+void libxl_device_usbdev_list_free(libxl_device_usbdev *list, int nr)
+{
+ int i;
+
+ for (i = 0; i < nr; i++)
+ libxl_device_usbdev_dispose(&list[i]);
+ free(list);
+}
+
/*
* Local variables:
* mode: C
diff --git a/tools/libxl/libxl_utils.h b/tools/libxl/libxl_utils.h
index 339ebdf..4495417 100644
--- a/tools/libxl/libxl_utils.h
+++ b/tools/libxl/libxl_utils.h
@@ -76,6 +76,11 @@ int libxl_uuid_to_device_vtpm(libxl_ctx *ctx, uint32_t domid,
libxl_uuid *uuid, libxl_device_vtpm *vtpm);
int libxl_devid_to_device_vtpm(libxl_ctx *ctx, uint32_t domid,
int devid, libxl_device_vtpm *vtpm);
+int libxl_devid_to_device_usbctrl(libxl_ctx *ctx, uint32_t domid,
+ int devid, libxl_device_usbctrl *usbctrl);
+int libxl_ctrlport_to_device_usbdev(libxl_ctx *ctx, uint32_t domid,
+ int ctrl, int port,
+ libxl_device_usbdev *usbdev);
int libxl_bitmap_alloc(libxl_ctx *ctx, libxl_bitmap *bitmap, int n_bits);
/* Allocated bimap is from malloc, libxl_bitmap_dispose() to be
--
2.1.4
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH V14 5/6] domcreate: support pvusb in configuration file
2016-02-19 10:39 [PATCH V14 0/6] xen pvusb toolstack work Chunyan Liu
` (3 preceding siblings ...)
2016-02-19 10:39 ` [PATCH V14 4/6] libxl: add pvusb API Chunyan Liu
@ 2016-02-19 10:39 ` Chunyan Liu
2016-02-19 10:39 ` [PATCH V14 6/6] xl: add pvusb commands Chunyan Liu
5 siblings, 0 replies; 12+ messages in thread
From: Chunyan Liu @ 2016-02-19 10:39 UTC (permalink / raw)
To: xen-devel
Cc: jgross, olaf, wei.liu2, ian.campbell, george.dunlap, Ian.Jackson,
Chunyan Liu, jfehlig, Simon Cao
Add code to support pvusb in domain config file. One could specify
usbctrl and usb in domain's configuration file and create domain,
then usb controllers will be created and usb device would be attached
to guest automatically.
One could specify usb controllers and usb devices in config file
like this:
usbctrl=['version=2,ports=4', 'version=1, ports=4', ]
usbdev=['hostbus=2, hostaddr=1, controller=0,port=1', ]
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Simon Cao <caobosimon@gmail.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
---
docs/man/xl.cfg.pod.5 | 84 +++++++++++++++++++++++++++++++++
tools/libxl/libxl_create.c | 73 +++++++++++++++++++++++++++--
tools/libxl/libxl_device.c | 4 ++
tools/libxl/libxl_internal.h | 8 ++++
tools/libxl/xl_cmdimpl.c | 107 ++++++++++++++++++++++++++++++++++++++++++-
5 files changed, 272 insertions(+), 4 deletions(-)
diff --git a/docs/man/xl.cfg.pod.5 b/docs/man/xl.cfg.pod.5
index 40690bd..7eecdc1 100644
--- a/docs/man/xl.cfg.pod.5
+++ b/docs/man/xl.cfg.pod.5
@@ -722,6 +722,90 @@ Note this may be overridden by rdm_policy option in PCI device configuration.
=back
+=item B<usbctrl=[ "USBCTRL_SPEC_STRING", "USBCTRL_SPEC_STRING", ... ]>
+
+Specifies the USB controllers created for this guest. Each
+B<USB_SPEC_STRING> has the form C<KEY=VALUE,KEY=VALUE,...> where:
+
+=over 4
+
+=item B<KEY=VALUE>
+
+Possible B<KEY>s are:
+
+=over 4
+
+=item B<type=TYPE>
+
+Specifies the usb controller type. Currently only 'pv' and 'auto'
+are supported.
+
+=item B<version=VERSION>
+
+Specifies the usb controller version. Possible values include
+1 (USB1.1) and 2 (USB2.0). Default is 2 (USB2.0).
+
+=item B<ports=PORTS>
+
+Specifies the total ports of the usb controller. The maximum
+number is 31. Default is 8.
+
+USB controler ids start from 0. In line with the USB spec, however,
+ports on a controller start from 1.
+
+E.g.
+usbctrl=["version=1,ports=4", "version=2,ports=8",]
+The first controller has:
+controller id = 0, and port 1,2,3,4.
+The second controller has:
+controller id = 1, and port 1,2,3,4,5,6,7,8.
+
+=back
+
+=back
+
+=item B<usbdev=[ "USB_SPEC_STRING", "USB_SPEC_STRING", ... ]>
+
+Specifies the USB devices to be attached to the guest at boot. Each
+B<USB_SPEC_STRING> has the form C<KEY=VALUE,KEY=VALUE,...> where:
+
+=over 4
+
+=item B<KEY=VALUE>
+
+Possible B<KEY>s are:
+
+=over 4
+
+=item B<devtype=hostdev>
+
+Specifies USB device type. Currently only support 'hostdev'.
+
+=item B<hostbus=busnum>
+
+Specifies busnum of the USB device from the host perspective.
+
+=item B<hostaddr=devnum>
+
+Specifies devnum of the USB device from the host perspective.
+
+=item B<controller=CONTROLLER>
+
+Specifies USB controller id, to which controller the USB device is attached.
+
+=item B<port=PORT>
+
+Specifies USB port, to which port the USB device is attached. B<port=PORT>
+is valid only when B<controller=CONTROLLER> is specified.
+
+=back
+
+If no controller is specified, an available controller:port combination
+will be used. If there are no available controller:port options,
+a new controller will be created.
+
+=back
+
=item B<pci=[ "PCI_SPEC_STRING", "PCI_SPEC_STRING", ... ]>
Specifies the host PCI devices to passthrough to this guest. Each B<PCI_SPEC_STRING>
diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
index de5d27f..b3cc2f2 100644
--- a/tools/libxl/libxl_create.c
+++ b/tools/libxl/libxl_create.c
@@ -754,6 +754,10 @@ static void domcreate_launch_dm(libxl__egc *egc, libxl__multidev *aodevs,
static void domcreate_attach_vtpms(libxl__egc *egc, libxl__multidev *multidev,
int ret);
+static void domcreate_attach_usbctrls(libxl__egc *egc,
+ libxl__multidev *multidev, int ret);
+static void domcreate_attach_usbdevs(libxl__egc *egc, libxl__multidev *multidev,
+ int ret);
static void domcreate_attach_pci(libxl__egc *egc, libxl__multidev *aodevs,
int ret);
static void domcreate_attach_dtdev(libxl__egc *egc,
@@ -1419,13 +1423,13 @@ static void domcreate_attach_vtpms(libxl__egc *egc,
if (d_config->num_vtpms > 0) {
/* Attach vtpms */
libxl__multidev_begin(ao, &dcs->multidev);
- dcs->multidev.callback = domcreate_attach_pci;
+ dcs->multidev.callback = domcreate_attach_usbctrls;
libxl__add_vtpms(egc, ao, domid, d_config, &dcs->multidev);
libxl__multidev_prepared(egc, &dcs->multidev, 0);
return;
}
- domcreate_attach_pci(egc, multidev, 0);
+ domcreate_attach_usbctrls(egc, multidev, 0);
return;
error_out:
@@ -1433,6 +1437,69 @@ error_out:
domcreate_complete(egc, dcs, ret);
}
+static void domcreate_attach_usbctrls(libxl__egc *egc,
+ libxl__multidev *multidev, int ret)
+{
+ libxl__domain_create_state *dcs = CONTAINER_OF(multidev, *dcs, multidev);
+ STATE_AO_GC(dcs->ao);
+ int domid = dcs->guest_domid;
+
+ libxl_domain_config *const d_config = dcs->guest_config;
+
+ if (ret) {
+ LOG(ERROR, "unable to add vtpm devices");
+ goto error_out;
+ }
+
+ if (d_config->num_usbctrls > 0) {
+ /* Attach usbctrls */
+ libxl__multidev_begin(ao, &dcs->multidev);
+ dcs->multidev.callback = domcreate_attach_usbdevs;
+ libxl__add_usbctrls(egc, ao, domid, d_config, &dcs->multidev);
+ libxl__multidev_prepared(egc, &dcs->multidev, 0);
+ return;
+ }
+
+ domcreate_attach_usbdevs(egc, multidev, 0);
+ return;
+
+error_out:
+ assert(ret);
+ domcreate_complete(egc, dcs, ret);
+}
+
+
+static void domcreate_attach_usbdevs(libxl__egc *egc, libxl__multidev *multidev,
+ int ret)
+{
+ libxl__domain_create_state *dcs = CONTAINER_OF(multidev, *dcs, multidev);
+ STATE_AO_GC(dcs->ao);
+ int domid = dcs->guest_domid;
+
+ libxl_domain_config *const d_config = dcs->guest_config;
+
+ if (ret) {
+ LOG(ERROR, "unable to add usbctrl devices");
+ goto error_out;
+ }
+
+ if (d_config->num_usbdevs > 0) {
+ /* Attach usbctrls */
+ libxl__multidev_begin(ao, &dcs->multidev);
+ dcs->multidev.callback = domcreate_attach_pci;
+ libxl__add_usbdevs(egc, ao, domid, d_config, &dcs->multidev);
+ libxl__multidev_prepared(egc, &dcs->multidev, 0);
+ return;
+ }
+
+ domcreate_attach_pci(egc, multidev, 0);
+ return;
+
+error_out:
+ assert(ret);
+ domcreate_complete(egc, dcs, ret);
+}
+
static void domcreate_attach_pci(libxl__egc *egc, libxl__multidev *multidev,
int ret)
{
@@ -1445,7 +1512,7 @@ static void domcreate_attach_pci(libxl__egc *egc, libxl__multidev *multidev,
libxl_domain_config *const d_config = dcs->guest_config;
if (ret) {
- LOG(ERROR, "unable to add vtpm devices");
+ LOG(ERROR, "unable to add usb devices");
goto error_out;
}
diff --git a/tools/libxl/libxl_device.c b/tools/libxl/libxl_device.c
index b7a6a13..4ced9b6 100644
--- a/tools/libxl/libxl_device.c
+++ b/tools/libxl/libxl_device.c
@@ -544,6 +544,8 @@ void libxl__multidev_prepared(libxl__egc *egc,
* libxl__add_disks
* libxl__add_nics
* libxl__add_vtpms
+ * libxl__add_usbctrls
+ * libxl__add_usbs
*/
#define DEFINE_DEVICES_ADD(type) \
@@ -563,6 +565,8 @@ void libxl__multidev_prepared(libxl__egc *egc,
DEFINE_DEVICES_ADD(disk)
DEFINE_DEVICES_ADD(nic)
DEFINE_DEVICES_ADD(vtpm)
+DEFINE_DEVICES_ADD(usbctrl)
+DEFINE_DEVICES_ADD(usbdev)
#undef DEFINE_DEVICES_ADD
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index 46272c6..f882b2a 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -3320,6 +3320,14 @@ _hidden void libxl__add_vtpms(libxl__egc *egc, libxl__ao *ao, uint32_t domid,
libxl_domain_config *d_config,
libxl__multidev *multidev);
+_hidden void libxl__add_usbctrls(libxl__egc *egc, libxl__ao *ao,
+ uint32_t domid, libxl_domain_config *d_config,
+ libxl__multidev *multidev);
+
+_hidden void libxl__add_usbdevs(libxl__egc *egc, libxl__ao *ao,
+ uint32_t domid, libxl_domain_config *d_config,
+ libxl__multidev *multidev);
+
/*----- device model creation -----*/
/* First layer; wraps libxl__spawn_spawn. */
diff --git a/tools/libxl/xl_cmdimpl.c b/tools/libxl/xl_cmdimpl.c
index d07ccb2..32621d6 100644
--- a/tools/libxl/xl_cmdimpl.c
+++ b/tools/libxl/xl_cmdimpl.c
@@ -1255,6 +1255,58 @@ static void parse_vnuma_config(const XLU_Config *config,
free(vcpu_parsed);
}
+/* Parses usbctrl data and adds info into usbctrl
+ * Returns 1 if the input token does not match one of the keys
+ * or parsed values are not correct. Successful parse returns 0 */
+static int parse_usbctrl_config(libxl_device_usbctrl *usbctrl, char *token)
+{
+ char *oparg;
+
+ if (MATCH_OPTION("type", token, oparg)) {
+ if (libxl_usbctrl_type_from_string(oparg, &usbctrl->type)) {
+ fprintf(stderr, "Invalid usb controller type '%s'\n", oparg);
+ return 1;
+ }
+ } else if (MATCH_OPTION("version", token, oparg)) {
+ usbctrl->version = atoi(oparg);
+ } else if (MATCH_OPTION("ports", token, oparg)) {
+ usbctrl->ports = atoi(oparg);
+ } else {
+ fprintf(stderr, "Unknown string `%s' in usbctrl spec\n", token);
+ return 1;
+ }
+
+ return 0;
+}
+
+/* Parses usbdev data and adds info into usbdev
+ * Returns 1 if the input token does not match one of the keys
+ * or parsed values are not correct. Successful parse returns 0 */
+static int parse_usbdev_config(libxl_device_usbdev *usbdev, char *token)
+{
+ char *oparg;
+
+ if (MATCH_OPTION("type", token, oparg)) {
+ if (libxl_usbdev_type_from_string(oparg, &usbdev->type)) {
+ fprintf(stderr, "Invalid usb device type: %s\n", optarg);
+ return 1;
+ }
+ } else if (MATCH_OPTION("hostbus", token, oparg)) {
+ usbdev->u.hostdev.hostbus = strtoul(oparg, NULL, 0);
+ } else if (MATCH_OPTION("hostaddr", token, oparg)) {
+ usbdev->u.hostdev.hostaddr = strtoul(oparg, NULL, 0);
+ } else if (MATCH_OPTION("controller", token, oparg)) {
+ usbdev->ctrl = atoi(oparg);
+ } else if (MATCH_OPTION("port", token, oparg)) {
+ usbdev->port = atoi(oparg);
+ } else {
+ fprintf(stderr, "Unknown string `%s' in usbdev spec\n", token);
+ return 1;
+ }
+
+ return 0;
+}
+
static void parse_config_data(const char *config_source,
const char *config_data,
int config_len,
@@ -1263,7 +1315,8 @@ static void parse_config_data(const char *config_source,
const char *buf;
long l, vcpus = 0;
XLU_Config *config;
- XLU_ConfigList *cpus, *vbds, *nics, *pcis, *cvfbs, *cpuids, *vtpms;
+ XLU_ConfigList *cpus, *vbds, *nics, *pcis, *cvfbs, *cpuids, *vtpms,
+ *usbctrls, *usbdevs;
XLU_ConfigList *channels, *ioports, *irqs, *iomem, *viridian, *dtdevs;
int num_ioports, num_irqs, num_iomem, num_cpus, num_viridian;
int pci_power_mgmt = 0;
@@ -2080,6 +2133,58 @@ skip_vfb:
}
}
+ if (!xlu_cfg_get_list(config, "usbctrl", &usbctrls, 0, 0)) {
+ d_config->num_usbctrls = 0;
+ d_config->usbctrls = NULL;
+ while ((buf = xlu_cfg_get_listitem(usbctrls, d_config->num_usbctrls))
+ != NULL) {
+ libxl_device_usbctrl *usbctrl;
+ char *buf2 = strdup(buf);
+ char *p;
+
+ usbctrl = ARRAY_EXTEND_INIT(d_config->usbctrls,
+ d_config->num_usbctrls,
+ libxl_device_usbctrl_init);
+ p = strtok(buf2, ",");
+ if (!p)
+ goto skip_usbctrl;
+ do {
+ while (*p == ' ')
+ p++;
+ if (parse_usbctrl_config(usbctrl, p))
+ exit(1);
+ } while ((p = strtok(NULL, ",")) != NULL);
+skip_usbctrl:
+ free(buf2);
+ }
+ }
+
+ if (!xlu_cfg_get_list(config, "usbdev", &usbdevs, 0, 0)) {
+ d_config->num_usbdevs = 0;
+ d_config->usbdevs = NULL;
+ while ((buf = xlu_cfg_get_listitem(usbdevs, d_config->num_usbdevs))
+ != NULL) {
+ libxl_device_usbdev *usbdev;
+ char *buf2 = strdup(buf);
+ char *p;
+
+ usbdev = ARRAY_EXTEND_INIT_NODEVID(d_config->usbdevs,
+ d_config->num_usbdevs,
+ libxl_device_usbdev_init);
+ p = strtok(buf2, ",");
+ if (!p)
+ goto skip_usbdev;
+ do {
+ while (*p == ' ')
+ p++;
+ if (parse_usbdev_config(usbdev, p))
+ exit(1);
+ } while ((p = strtok(NULL, ",")) != NULL);
+skip_usbdev:
+ free(buf2);
+ }
+ }
+
switch (xlu_cfg_get_list(config, "cpuid", &cpuids, 0, 1)) {
case 0:
{
--
2.1.4
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH V14 6/6] xl: add pvusb commands
2016-02-19 10:39 [PATCH V14 0/6] xen pvusb toolstack work Chunyan Liu
` (4 preceding siblings ...)
2016-02-19 10:39 ` [PATCH V14 5/6] domcreate: support pvusb in configuration file Chunyan Liu
@ 2016-02-19 10:39 ` Chunyan Liu
5 siblings, 0 replies; 12+ messages in thread
From: Chunyan Liu @ 2016-02-19 10:39 UTC (permalink / raw)
To: xen-devel
Cc: jgross, olaf, wei.liu2, ian.campbell, george.dunlap, Ian.Jackson,
Chunyan Liu, jfehlig, Simon Cao
Add pvusb commands: usbctrl-attach, usbctrl-detach, usb-list,
usbdev-attach and usbdev-detach.
To attach a usb device to guest through pvusb, one could follow
following example:
#xl usbctrl-attach test_vm version=1 ports=8
#xl usb-list test_vm
will show the usb controllers and port usage under the domain.
#xl usbdev-attach test_vm hostbus=1 hostaddr=2
will find the first usable controller:port, and attach usb
device whose busnum is 1 and devnum is 6.
One could also specify which <controller> and which <port>.
#xl usbdev-detach test_vm 0 1
will detach USB device under controller 0 port 1.
#xl usbctrl-detach test_vm dev_id
will destroy the controller with specified dev_id. Dev_id
can be traced in usb-list info.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Simon Cao <caobosimon@gmail.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
---
changes:
* update usbctrl-attach and usbdev-attach device_string description.
docs/man/xl.pod.1 | 37 +++++++++
tools/libxl/xl.h | 5 ++
tools/libxl/xl_cmdimpl.c | 190 ++++++++++++++++++++++++++++++++++++++++++++++
tools/libxl/xl_cmdtable.c | 25 ++++++
4 files changed, 257 insertions(+)
diff --git a/docs/man/xl.pod.1 b/docs/man/xl.pod.1
index 4279c7c..dc6213e 100644
--- a/docs/man/xl.pod.1
+++ b/docs/man/xl.pod.1
@@ -1345,6 +1345,43 @@ List pass-through pci devices for a domain.
=back
+=head1 USB PASS-THROUGH
+
+=over 4
+
+=item B<usbctrl-attach> I<domain-id> I<usbctrl-device>
+
+Create a new USB controller in the domain specified by I<domain-id>,
+I<usbctrl-device> describes the device to attach, using form
+C<KEY=VALUE KEY=VALUE ...> where B<KEY=VALUE> has the same
+meaning as the B<usbctrl> description in the domain config file.
+See L<xl.cfg> for more information.
+
+=item B<usbctrl-detach> I<domain-id> I<devid>
+
+Destroy a USB controller from the specified domain.
+B<devid> is devid of the USB controller.
+
+=item B<usbdev-attach> I<domain-id> I<usbdev-device>
+
+Hot-plug a new pass-through USB device to the domain specified by
+I<domain-id>, I<usbdev-device> describes the device to attach, using
+form C<KEY=VALUE KEY=VALUE ...> where B<KEY=VALUE> has the same
+meaning as the B<usbdev> description in the domain config file.
+See L<xl.cfg> for more information.
+
+=item B<usbdev-detach> I<domain-id> I<controller=devid> I<port=number>
+
+Hot-unplug a previously assigned USB device from a domain.
+B<controller=devid> and B<port=number> is USB controller:port in guest
+where the USB device is attached to.
+
+=item B<usb-list> I<domain-id>
+
+List pass-through usb devices for a domain.
+
+=back
+
=head1 TMEM
=over 4
diff --git a/tools/libxl/xl.h b/tools/libxl/xl.h
index bdab125..309627a 100644
--- a/tools/libxl/xl.h
+++ b/tools/libxl/xl.h
@@ -92,6 +92,11 @@ int main_blockdetach(int argc, char **argv);
int main_vtpmattach(int argc, char **argv);
int main_vtpmlist(int argc, char **argv);
int main_vtpmdetach(int argc, char **argv);
+int main_usbctrl_attach(int argc, char **argv);
+int main_usbctrl_detach(int argc, char **argv);
+int main_usbdev_attach(int argc, char **argv);
+int main_usbdev_detach(int argc, char **argv);
+int main_usblist(int argc, char **argv);
int main_uptime(int argc, char **argv);
int main_claims(int argc, char **argv);
int main_tmem_list(int argc, char **argv);
diff --git a/tools/libxl/xl_cmdimpl.c b/tools/libxl/xl_cmdimpl.c
index 32621d6..6f79745 100644
--- a/tools/libxl/xl_cmdimpl.c
+++ b/tools/libxl/xl_cmdimpl.c
@@ -3509,6 +3509,196 @@ int main_cd_insert(int argc, char **argv)
return 0;
}
+int main_usbctrl_attach(int argc, char **argv)
+{
+ uint32_t domid;
+ int opt, rc = 0;
+ libxl_device_usbctrl usbctrl;
+
+ SWITCH_FOREACH_OPT(opt, "", NULL, "usbctrl-attach", 1) {
+ /* No options */
+ }
+
+ domid = find_domain(argv[optind++]);
+
+ libxl_device_usbctrl_init(&usbctrl);
+
+ for (argv += optind, argc -= optind; argc > 0; ++argv, --argc) {
+ if (parse_usbctrl_config(&usbctrl, *argv))
+ return 1;
+ }
+
+ rc = libxl_device_usbctrl_add(ctx, domid, &usbctrl, 0);
+ if (rc) {
+ fprintf(stderr, "libxl_device_usbctrl_add failed.\n");
+ rc = 1;
+ }
+
+ libxl_device_usbctrl_dispose(&usbctrl);
+ return rc;
+}
+
+int main_usbctrl_detach(int argc, char **argv)
+{
+ uint32_t domid;
+ int opt, devid, rc;
+ libxl_device_usbctrl usbctrl;
+
+ SWITCH_FOREACH_OPT(opt, "", NULL, "usbctrl-detach", 2) {
+ /* No options */
+ }
+
+ domid = find_domain(argv[optind]);
+ devid = atoi(argv[optind+1]);
+
+ libxl_device_usbctrl_init(&usbctrl);
+ if (libxl_devid_to_device_usbctrl(ctx, domid, devid, &usbctrl)) {
+ fprintf(stderr, "Unknown device %s.\n", argv[optind+1]);
+ return 1;
+ }
+
+ rc = libxl_device_usbctrl_remove(ctx, domid, &usbctrl, 0);
+ if (rc) {
+ fprintf(stderr, "libxl_device_usbctrl_remove failed.\n");
+ rc = 1;
+ }
+
+ libxl_device_usbctrl_dispose(&usbctrl);
+ return rc;
+
+}
+
+int main_usbdev_attach(int argc, char **argv)
+{
+ uint32_t domid;
+ int opt, rc;
+ libxl_device_usbdev usbdev;
+
+ SWITCH_FOREACH_OPT(opt, "", NULL, "usbdev-attach", 2) {
+ /* No options */
+ }
+
+ libxl_device_usbdev_init(&usbdev);
+
+ domid = find_domain(argv[optind++]);
+
+ for (argv += optind, argc -= optind; argc > 0; ++argv, --argc) {
+ if (parse_usbdev_config(&usbdev, *argv))
+ return 1;
+ }
+
+ rc = libxl_device_usbdev_add(ctx, domid, &usbdev, 0);
+ if (rc) {
+ fprintf(stderr, "libxl_device_usbdev_add failed.\n");
+ rc = 1;
+ }
+
+ libxl_device_usbdev_dispose(&usbdev);
+ return rc;
+}
+
+int main_usbdev_detach(int argc, char **argv)
+{
+ uint32_t domid;
+ int ctrl, port;
+ int opt, rc = 1;
+ libxl_device_usbdev usbdev;
+
+ SWITCH_FOREACH_OPT(opt, "", NULL, "usbdev-detach", 3) {
+ /* No options */
+ }
+
+ domid = find_domain(argv[optind]);
+ ctrl = atoi(argv[optind+1]);
+ port = atoi(argv[optind+2]);
+
+ if (argc - optind > 3) {
+ fprintf(stderr, "Invalid arguments.\n");
+ return 1;
+ }
+
+ libxl_device_usbdev_init(&usbdev);
+ if (libxl_ctrlport_to_device_usbdev(ctx, domid, ctrl, port, &usbdev)) {
+ fprintf(stderr, "Unknown device at controller %d port %d.\n",
+ ctrl, port);
+ return 1;
+ }
+
+ rc = libxl_device_usbdev_remove(ctx, domid, &usbdev, 0);
+ if (rc) {
+ fprintf(stderr, "libxl_device_usbdev_remove failed.\n");
+ rc = 1;
+ }
+
+ libxl_device_usbdev_dispose(&usbdev);
+ return rc;
+}
+
+int main_usblist(int argc, char **argv)
+{
+ uint32_t domid;
+ libxl_device_usbctrl *usbctrls;
+ libxl_usbctrlinfo usbctrlinfo;
+ int numctrl, i, j, opt;
+
+ SWITCH_FOREACH_OPT(opt, "", NULL, "usb-list", 1) {
+ /* No options */
+ }
+
+ domid = find_domain(argv[optind++]);
+
+ if (argc > optind) {
+ fprintf(stderr, "Invalid arguments.\n");
+ exit(-1);
+ }
+
+ usbctrls = libxl_device_usbctrl_list(ctx, domid, &numctrl);
+ if (!usbctrls) {
+ return 0;
+ }
+
+ for (i = 0; i < numctrl; ++i) {
+ printf("%-6s %-6s %-3s %-5s %-7s %-5s\n",
+ "Devid", "Type", "BE", "state", "usb-ver", "ports");
+
+ libxl_usbctrlinfo_init(&usbctrlinfo);
+
+ if (!libxl_device_usbctrl_getinfo(ctx, domid,
+ &usbctrls[i], &usbctrlinfo)) {
+ printf("%-6d %-6s %-3d %-5d %-7d %-5d\n",
+ usbctrlinfo.devid,
+ libxl_usbctrl_type_to_string(usbctrlinfo.type),
+ usbctrlinfo.backend_id, usbctrlinfo.state,
+ usbctrlinfo.version, usbctrlinfo.ports);
+
+ for (j = 1; j <= usbctrlinfo.ports; j++) {
+ libxl_device_usbdev usbdev;
+
+ libxl_device_usbdev_init(&usbdev);
+
+ printf(" Port %d:", j);
+
+ if (!libxl_ctrlport_to_device_usbdev(ctx, domid,
+ usbctrlinfo.devid,
+ j, &usbdev)) {
+ printf(" Bus %03x Device %03x\n",
+ usbdev.u.hostdev.hostbus,
+ usbdev.u.hostdev.hostaddr);
+ } else {
+ printf("\n");
+ }
+
+ libxl_device_usbdev_dispose(&usbdev);
+ }
+ }
+
+ libxl_usbctrlinfo_dispose(&usbctrlinfo);
+ }
+
+ libxl_device_usbctrl_list_free(usbctrls, numctrl);
+ return 0;
+}
+
int main_console(int argc, char **argv)
{
uint32_t domid;
diff --git a/tools/libxl/xl_cmdtable.c b/tools/libxl/xl_cmdtable.c
index fdc1ac6..b14b881 100644
--- a/tools/libxl/xl_cmdtable.c
+++ b/tools/libxl/xl_cmdtable.c
@@ -553,6 +553,31 @@ struct cmd_spec cmd_table[] = {
},
#endif
+ { "usbctrl-attach",
+ &main_usbctrl_attach, 0, 1,
+ "Create a virtual USB controller for a domain",
+ "<Domain> [type=pv] [version=<version>] [ports=<number>]",
+ },
+ { "usbctrl-detach",
+ &main_usbctrl_detach, 0, 1,
+ "Remove the virtual USB controller specified by <DevId> for a domain",
+ "<Domain> <DevId>",
+ },
+ { "usbdev-attach",
+ &main_usbdev_attach, 0, 1,
+ "Attach a USB device to a domain",
+ "<Domain> hostbus=<busnum> hostaddr=<devnum> [controller=<DevId> [port=<port>]]",
+ },
+ { "usbdev-detach",
+ &main_usbdev_detach, 0, 1,
+ "Detach a USB device from a domain",
+ "<Domain> <controller> <port>",
+ },
+ { "usb-list",
+ &main_usblist, 0, 0,
+ "List information about all USB controllers and devices for a domain",
+ "<Domain>",
+ },
};
int cmdtable_len = sizeof(cmd_table)/sizeof(struct cmd_spec);
--
2.1.4
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH V14 4/6] libxl: add pvusb API
2016-02-19 10:39 ` [PATCH V14 4/6] libxl: add pvusb API Chunyan Liu
@ 2016-02-23 17:10 ` George Dunlap
2016-02-26 5:56 ` Chun Yan Liu
2016-02-26 12:09 ` Ian Jackson
0 siblings, 2 replies; 12+ messages in thread
From: George Dunlap @ 2016-02-23 17:10 UTC (permalink / raw)
To: Chunyan Liu
Cc: Jürgen Groß, Olaf Hering, Wei Liu, Ian Campbell,
Ian Jackson, George Dunlap, xen-devel@lists.xen.org, Jim Fehlig,
Simon Cao
On Fri, Feb 19, 2016 at 10:39 AM, Chunyan Liu <cyliu@suse.com> wrote:
> Add pvusb APIs, including:
> - attach/detach (create/destroy) virtual usb controller.
> - attach/detach usb device
> - list usb controller and usb devices
> - some other helper functions
>
> Signed-off-by: Simon Cao <caobosimon@gmail.com>
> Signed-off-by: George Dunlap <george.dunlap@citrix.com>
> Signed-off-by: Chunyan Liu <cyliu@suse.com>
> ---
> changes:
> Address Olaf's comments:
> * move DEFINE_DEVICE_REMOVE changes to a separate patch
> Address Ian's comments:
> * adjust order of removing xenstore and bind/unbind driver in usb_remove.
> * reuse libxl_write_exactly in usbintf_bind/unbind
> * several coding style fix
[snip]
> +/* Unbind USB device from "usbback" driver.
> + *
> + * If there are many interfaces under USB device, check each interface,
> + * unbind from "usbback" driver and rebind to its original driver.
> + */
> +static int usbback_dev_unassign(libxl__gc *gc, const char *busid)
> +{
> + char **intfs = NULL;
> + char *usbdev_encode = NULL;
> + char *path = NULL;
> + int i, num = 0;
> + int rc;
> +
> + rc = usbdev_get_all_interfaces(gc, busid, &intfs, &num);
> + if (rc) goto out;
> +
> + usbdev_encode = usb_interface_xenstore_encode(gc, busid);
> +
> + for (i = 0; i < num; i++) {
> + char *intf = intfs[i];
> + char *usbintf_encode = NULL;
> + const char *drvpath;
> +
> + /* check if the USB interface is already bound to "usbback" */
> + if (usbintf_is_assigned(gc, intf) > 0) {
> + /* unbind interface from usbback driver */
> + rc = unbind_usbintf(gc, intf);
> + if (rc) {
> + LOGE(ERROR, "Couldn't unbind %s from usbback", intf);
> + goto out;
> + }
> + }
> +
> + /* rebind USB interface to its originial driver */
> + usbintf_encode = usb_interface_xenstore_encode(gc, intf);
> + path = GCSPRINTF(USBBACK_INFO_PATH "/%s/%s/driver_path",
> + usbdev_encode, usbintf_encode);
> + rc = libxl__xs_read_checked(gc, XBT_NULL, path, &drvpath);
> + if (rc) goto out;
> +
> + if (drvpath) {
> + rc = bind_usbintf(gc, intf, drvpath);
> + if (rc) {
> + LOGE(ERROR, "Couldn't rebind %s to %s", intf, drvpath);
> + goto out;
> + }
> + }
> + }
So I see below that you're calling this before removing things from
xenstore, so that if any of these fail, the user can still call "xl
usb-remove" to retry.
Unfortunately, since you reassign interfaces to the original driver
before all interfaces are de-assigned from usbback, you can end up in
a situation where the device is partially re-plugged into the original
drivers, partially still assigned to pciback.
I think this whole process should be three steps:
1. Unassign all interfaces from usbback, stopping and returning an
error as soon as one attempt fails
2. Remove the pvusb xenstore nodes (stopping and returning an error if it fails)
3. Attempt to re-assign all interfaces to the original drivers,
stopping and returning an error as soon as one attempt fails.
And in the case of #3, the log message should give a suggestion as to
what might help; for instance, "Couldn't rebind USB device to driver
[driver name]. Reloading the module may help." (I think you should
be able to get the driver name from the path, right?)
A couple of properties this gives us:
* If the un-assign partially succeeds, the user can re-try the unassign
* If one of the re-assignments fail, then the user will have to reload
the drivers, reboot, or mess around with sysfs to fix things.
*However*, this avoids a scenario where a user is completely unable to
remove a device from a domain because of a buggy driver.
What do you think?
I realize this falls short of the "crash-only" design IanJ suggested
we try to do, but I think that in this case the work required to do
such a design would be a lot more work than the benefit it gives us.
I haven't re-reviewed the whole patch, but all the other changes look
good to me.
-George
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH V14 4/6] libxl: add pvusb API
2016-02-23 17:10 ` George Dunlap
@ 2016-02-26 5:56 ` Chun Yan Liu
2016-02-26 12:09 ` Ian Jackson
1 sibling, 0 replies; 12+ messages in thread
From: Chun Yan Liu @ 2016-02-26 5:56 UTC (permalink / raw)
To: George Dunlap
Cc: Juergen Gross, Olaf Hering, Wei Liu, Ian Campbell, Ian Jackson,
George Dunlap, xen-devel@lists.xen.org, Jim Fehlig, Simon Cao
>>> On 2/24/2016 at 01:10 AM, in message
<CAFLBxZYrdhLO-euMioWiitqh7+FDUKc7rxO3g=m=-3tPGFuRxw@mail.gmail.com>, George
Dunlap <George.Dunlap@eu.citrix.com> wrote:
> On Fri, Feb 19, 2016 at 10:39 AM, Chunyan Liu <cyliu@suse.com> wrote:
> > Add pvusb APIs, including:
> > - attach/detach (create/destroy) virtual usb controller.
> > - attach/detach usb device
> > - list usb controller and usb devices
> > - some other helper functions
> >
> > Signed-off-by: Simon Cao <caobosimon@gmail.com>
> > Signed-off-by: George Dunlap <george.dunlap@citrix.com>
> > Signed-off-by: Chunyan Liu <cyliu@suse.com>
> > ---
> > changes:
> > Address Olaf's comments:
> > * move DEFINE_DEVICE_REMOVE changes to a separate patch
> > Address Ian's comments:
> > * adjust order of removing xenstore and bind/unbind driver in usb_remove.
> > * reuse libxl_write_exactly in usbintf_bind/unbind
> > * several coding style fix
>
> [snip]
>
> > +/* Unbind USB device from "usbback" driver.
> > + *
> > + * If there are many interfaces under USB device, check each interface,
> > + * unbind from "usbback" driver and rebind to its original driver.
> > + */
> > +static int usbback_dev_unassign(libxl__gc *gc, const char *busid)
> > +{
> > + char **intfs = NULL;
> > + char *usbdev_encode = NULL;
> > + char *path = NULL;
> > + int i, num = 0;
> > + int rc;
> > +
> > + rc = usbdev_get_all_interfaces(gc, busid, &intfs, &num);
> > + if (rc) goto out;
> > +
> > + usbdev_encode = usb_interface_xenstore_encode(gc, busid);
> > +
> > + for (i = 0; i < num; i++) {
> > + char *intf = intfs[i];
> > + char *usbintf_encode = NULL;
> > + const char *drvpath;
> > +
> > + /* check if the USB interface is already bound to "usbback" */
> > + if (usbintf_is_assigned(gc, intf) > 0) {
> > + /* unbind interface from usbback driver */
> > + rc = unbind_usbintf(gc, intf);
> > + if (rc) {
> > + LOGE(ERROR, "Couldn't unbind %s from usbback", intf);
> > + goto out;
> > + }
> > + }
> > +
> > + /* rebind USB interface to its originial driver */
> > + usbintf_encode = usb_interface_xenstore_encode(gc, intf);
> > + path = GCSPRINTF(USBBACK_INFO_PATH "/%s/%s/driver_path",
> > + usbdev_encode, usbintf_encode);
> > + rc = libxl__xs_read_checked(gc, XBT_NULL, path, &drvpath);
> > + if (rc) goto out;
> > +
> > + if (drvpath) {
> > + rc = bind_usbintf(gc, intf, drvpath);
> > + if (rc) {
> > + LOGE(ERROR, "Couldn't rebind %s to %s", intf, drvpath);
> > + goto out;
> > + }
> > + }
> > + }
>
> So I see below that you're calling this before removing things from
> xenstore, so that if any of these fail, the user can still call "xl
> usb-remove" to retry.
>
> Unfortunately, since you reassign interfaces to the original driver
> before all interfaces are de-assigned from usbback, you can end up in
> a situation where the device is partially re-plugged into the original
> drivers, partially still assigned to pciback.
>
> I think this whole process should be three steps:
>
> 1. Unassign all interfaces from usbback, stopping and returning an
> error as soon as one attempt fails
>
> 2. Remove the pvusb xenstore nodes (stopping and returning an error if it
> fails)
>
> 3. Attempt to re-assign all interfaces to the original drivers,
> stopping and returning an error as soon as one attempt fails.
>
> And in the case of #3, the log message should give a suggestion as to
> what might help; for instance, "Couldn't rebind USB device to driver
> [driver name]. Reloading the module may help." (I think you should
> be able to get the driver name from the path, right?)
Yes, that's right.
>
> A couple of properties this gives us:
>
> * If the un-assign partially succeeds, the user can re-try the unassign
>
> * If one of the re-assignments fail, then the user will have to reload
> the drivers, reboot, or mess around with sysfs to fix things.
> *However*, this avoids a scenario where a user is completely unable to
> remove a device from a domain because of a buggy driver.
To guest or host, this situation that some interface is bound to pciback
but some is to original driver, is indeed a mess. But to toolstack, it can
still have chance to redo 'xl usbdev-remove' to retry the left work (unassign
interfaces those bound to pciback, and reassign to original interface).
>
> What do you think?
The 3 steps above are indeed more reasonable. Codes need to be
reorganized (previously doing unassingn_form_pciback and rebind to
original driver in a same cycle for each interface, now will be split into
two separate processes: walk through each interface to do
unassign_from_pciback, and walk through each interface to rebind to
original driver).
But now that if error happens in rebinding to original driver, user will
have to manually deal with driver things, user can do the same when
error happens in unassign_from_pciback. So, now I just wonder:
is it really better to switch the order of unassign_from_pciback and
remove_from_xenstore? (A situation that "a USB device is assigned
to guest but some interface is bound to pciback and some is
unbound" is also a mess.)
-Chunyan
>
> I realize this falls short of the "crash-only" design IanJ suggested
> we try to do, but I think that in this case the work required to do
> such a design would be a lot more work than the benefit it gives us.
>
> I haven't re-reviewed the whole patch, but all the other changes look
> good to me.
>
> -George
>
>
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH V14 4/6] libxl: add pvusb API
2016-02-23 17:10 ` George Dunlap
2016-02-26 5:56 ` Chun Yan Liu
@ 2016-02-26 12:09 ` Ian Jackson
2016-02-29 10:14 ` George Dunlap
1 sibling, 1 reply; 12+ messages in thread
From: Ian Jackson @ 2016-02-26 12:09 UTC (permalink / raw)
To: George Dunlap
Cc: Jürgen Groß, Olaf Hering, Wei Liu, Ian Campbell,
Chunyan Liu, xen-devel@lists.xen.org, Jim Fehlig, George Dunlap,
Simon Cao
George Dunlap writes ("Re: [Xen-devel] [PATCH V14 4/6] libxl: add pvusb API"):
> On Fri, Feb 19, 2016 at 10:39 AM, Chunyan Liu <cyliu@suse.com> wrote:
> > + [...]
>
> So I see below that you're calling this before removing things from
> xenstore, so that if any of these fail, the user can still call "xl
> usb-remove" to retry.
>
> Unfortunately, since you reassign interfaces to the original driver
> before all interfaces are de-assigned from usbback, you can end up in
> a situation where the device is partially re-plugged into the original
> drivers, partially still assigned to pciback.
>
> I think this whole process should be three steps:
>
> 1. Unassign all interfaces from usbback, stopping and returning an
> error as soon as one attempt fails
>
> 2. Remove the pvusb xenstore nodes (stopping and returning an error if it fails)
>
> 3. Attempt to re-assign all interfaces to the original drivers,
> stopping and returning an error as soon as one attempt fails.
This seems like a good plan to me.
(Making 3 after 2 re-attemptable would mean that the original driver
information needs to be saved in a different location in xenstore to
the pvusb control nodes, but that is not a problem.)
> * If one of the re-assignments fail, then the user will have to reload
> the drivers, reboot, or mess around with sysfs to fix things.
> *However*, this avoids a scenario where a user is completely unable to
> remove a device from a domain because of a buggy driver.
Right.
> I realize this falls short of the "crash-only" design IanJ suggested
> we try to do, but I think that in this case the work required to do
> such a design would be a lot more work than the benefit it gives us.
I think what you have above is indeed crash-only. You can tell by all
the "if any error occurs, stop immediately".
The only wrinkle is that the obvious implementation reads the old
bindings from xenstore between 1 and 2, deletes the information from
xenstore in 2, and uses that information in step 3, which is cheating
(and leads to the sysfs-wrangling-required state). But that is quite
easy to avoid:
- record the old driver bindings somewhere in xenstore (keyed by
the physical host device, not the guest domain)
- provide a libxl call and corresponding xl command which attempts
to rebind
But, FAOD, I do not want to block this patch until such a thing is
implemented. I think it is sufficient to document the existence of
the awkward state, and the likely workarounds.
Ian.
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH V14 4/6] libxl: add pvusb API
2016-02-26 12:09 ` Ian Jackson
@ 2016-02-29 10:14 ` George Dunlap
2016-03-01 3:37 ` Chun Yan Liu
0 siblings, 1 reply; 12+ messages in thread
From: George Dunlap @ 2016-02-29 10:14 UTC (permalink / raw)
To: Ian Jackson, George Dunlap
Cc: Jürgen Groß, Olaf Hering, Wei Liu, Ian Campbell,
Chunyan Liu, xen-devel@lists.xen.org, Jim Fehlig, Simon Cao
On 26/02/16 12:09, Ian Jackson wrote:
> George Dunlap writes ("Re: [Xen-devel] [PATCH V14 4/6] libxl: add pvusb API"):
>> On Fri, Feb 19, 2016 at 10:39 AM, Chunyan Liu <cyliu@suse.com> wrote:
>>> + [...]
>>
>> So I see below that you're calling this before removing things from
>> xenstore, so that if any of these fail, the user can still call "xl
>> usb-remove" to retry.
>>
>> Unfortunately, since you reassign interfaces to the original driver
>> before all interfaces are de-assigned from usbback, you can end up in
>> a situation where the device is partially re-plugged into the original
>> drivers, partially still assigned to pciback.
>>
>> I think this whole process should be three steps:
>>
>> 1. Unassign all interfaces from usbback, stopping and returning an
>> error as soon as one attempt fails
>>
>> 2. Remove the pvusb xenstore nodes (stopping and returning an error if it fails)
>>
>> 3. Attempt to re-assign all interfaces to the original drivers,
>> stopping and returning an error as soon as one attempt fails.
>
> This seems like a good plan to me.
>
> (Making 3 after 2 re-attemptable would mean that the original driver
> information needs to be saved in a different location in xenstore to
> the pvusb control nodes, but that is not a problem.)
>
>> * If one of the re-assignments fail, then the user will have to reload
>> the drivers, reboot, or mess around with sysfs to fix things.
>> *However*, this avoids a scenario where a user is completely unable to
>> remove a device from a domain because of a buggy driver.
>
> Right.
>
>> I realize this falls short of the "crash-only" design IanJ suggested
>> we try to do, but I think that in this case the work required to do
>> such a design would be a lot more work than the benefit it gives us.
>
> I think what you have above is indeed crash-only. You can tell by all
> the "if any error occurs, stop immediately".
>
> The only wrinkle is that the obvious implementation reads the old
> bindings from xenstore between 1 and 2, deletes the information from
> xenstore in 2, and uses that information in step 3, which is cheating
> (and leads to the sysfs-wrangling-required state). But that is quite
> easy to avoid:
> - record the old driver bindings somewhere in xenstore (keyed by
> the physical host device, not the guest domain)
> - provide a libxl call and corresponding xl command which attempts
> to rebind
The re-bind information is already stored in a different location, keyed
by physical host device. :-) (Search for uses of USBBACK_INFO_PATH.)
But we would, as you say, need to add a separate function/command for
doing clean-up (simply calling xl usb-detach on the virtual device again
doesn't make much sense, since the virtual devices no longer shows up in
xl usb-list). Since we don't have another such command to copy, we'd be
inventing a new one, which means thinking very carefully about the
design of the interface (since we'd want future such functions to follow
this precedent if possible), &c &c, so...
> But, FAOD, I do not want to block this patch until such a thing is
> implemented. I think it is sufficient to document the existence of
> the awkward state, and the likely workarounds.
Great, thanks. :-)
-George
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH V14 4/6] libxl: add pvusb API
2016-02-29 10:14 ` George Dunlap
@ 2016-03-01 3:37 ` Chun Yan Liu
0 siblings, 0 replies; 12+ messages in thread
From: Chun Yan Liu @ 2016-03-01 3:37 UTC (permalink / raw)
To: George Dunlap, George Dunlap, Ian Jackson
Cc: Juergen Gross, Olaf Hering, Wei Liu, Ian Campbell,
xen-devel@lists.xen.org, Jim Fehlig, Simon Cao
>>> On 2/29/2016 at 06:14 PM, in message <56D419F6.8030704@citrix.com>, George
Dunlap <george.dunlap@citrix.com> wrote:
> On 26/02/16 12:09, Ian Jackson wrote:
> > George Dunlap writes ("Re: [Xen-devel] [PATCH V14 4/6] libxl: add pvusb
> API"):
> >> On Fri, Feb 19, 2016 at 10:39 AM, Chunyan Liu <cyliu@suse.com> wrote:
> >>> + [...]
> >>
> >> So I see below that you're calling this before removing things from
> >> xenstore, so that if any of these fail, the user can still call "xl
> >> usb-remove" to retry.
> >>
> >> Unfortunately, since you reassign interfaces to the original driver
> >> before all interfaces are de-assigned from usbback, you can end up in
> >> a situation where the device is partially re-plugged into the original
> >> drivers, partially still assigned to pciback.
> >>
> >> I think this whole process should be three steps:
> >>
> >> 1. Unassign all interfaces from usbback, stopping and returning an
> >> error as soon as one attempt fails
> >>
> >> 2. Remove the pvusb xenstore nodes (stopping and returning an error if it
> fails)
> >>
> >> 3. Attempt to re-assign all interfaces to the original drivers,
> >> stopping and returning an error as soon as one attempt fails.
I'll update codes to this order and post.
-Chunyan
> >
> > This seems like a good plan to me.
> >
> > (Making 3 after 2 re-attemptable would mean that the original driver
> > information needs to be saved in a different location in xenstore to
> > the pvusb control nodes, but that is not a problem.)
> >
> >> * If one of the re-assignments fail, then the user will have to reload
> >> the drivers, reboot, or mess around with sysfs to fix things.
> >> *However*, this avoids a scenario where a user is completely unable to
> >> remove a device from a domain because of a buggy driver.
> >
> > Right.
> >
> >> I realize this falls short of the "crash-only" design IanJ suggested
> >> we try to do, but I think that in this case the work required to do
> >> such a design would be a lot more work than the benefit it gives us.
> >
> > I think what you have above is indeed crash-only. You can tell by all
> > the "if any error occurs, stop immediately".
> >
> > The only wrinkle is that the obvious implementation reads the old
> > bindings from xenstore between 1 and 2, deletes the information from
> > xenstore in 2, and uses that information in step 3, which is cheating
> > (and leads to the sysfs-wrangling-required state). But that is quite
> > easy to avoid:
> > - record the old driver bindings somewhere in xenstore (keyed by
> > the physical host device, not the guest domain)
> > - provide a libxl call and corresponding xl command which attempts
> > to rebind
>
> The re-bind information is already stored in a different location, keyed
> by physical host device. :-) (Search for uses of USBBACK_INFO_PATH.)
>
> But we would, as you say, need to add a separate function/command for
> doing clean-up (simply calling xl usb-detach on the virtual device again
> doesn't make much sense, since the virtual devices no longer shows up in
> xl usb-list). Since we don't have another such command to copy, we'd be
> inventing a new one, which means thinking very carefully about the
> design of the interface (since we'd want future such functions to follow
> this precedent if possible), &c &c, so...
>
> > But, FAOD, I do not want to block this patch until such a thing is
> > implemented. I think it is sufficient to document the existence of
> > the awkward state, and the likely workarounds.
>
> Great, thanks. :-)
>
> -George
>
>
>
>
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2016-03-01 3:37 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-02-19 10:39 [PATCH V14 0/6] xen pvusb toolstack work Chunyan Liu
2016-02-19 10:39 ` [PATCH V14 1/6] libxl: export some functions for pvusb use Chunyan Liu
2016-02-19 10:39 ` [PATCH V14 2/6] libxl_utils: add internal function to read sysfs file contents Chunyan Liu
2016-02-19 10:39 ` [PATCH V14 3/6] refactor DEFINE_DEVICE_REMOVE to fit for more device types Chunyan Liu
2016-02-19 10:39 ` [PATCH V14 4/6] libxl: add pvusb API Chunyan Liu
2016-02-23 17:10 ` George Dunlap
2016-02-26 5:56 ` Chun Yan Liu
2016-02-26 12:09 ` Ian Jackson
2016-02-29 10:14 ` George Dunlap
2016-03-01 3:37 ` Chun Yan Liu
2016-02-19 10:39 ` [PATCH V14 5/6] domcreate: support pvusb in configuration file Chunyan Liu
2016-02-19 10:39 ` [PATCH V14 6/6] xl: add pvusb commands Chunyan Liu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).