xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Haozhong Zhang <haozhong.zhang@intel.com>
To: xen-devel@lists.xen.org, Jan Beulich <jbeulich@suse.com>,
	Boris Ostrovsky <boris.ostrovsky@oracle.com>,
	Kevin Tian <kevin.tian@intel.com>
Cc: Haozhong Zhang <haozhong.zhang@intel.com>,
	Keir Fraser <keir@xen.org>,
	Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>,
	Andrew Cooper <andrew.cooper3@citrix.com>,
	Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>,
	Jun Nakajima <jun.nakajima@intel.com>
Subject: [PATCH v5 2/6] x86/hvm: Setup TSC scaling ratio
Date: Tue, 23 Feb 2016 10:05:00 +0800	[thread overview]
Message-ID: <1456193104-12761-3-git-send-email-haozhong.zhang@intel.com> (raw)
In-Reply-To: <1456193104-12761-1-git-send-email-haozhong.zhang@intel.com>

This patch adds a field tsc_scaling_ratio in struct hvm_domain to record
the per-domain TSC scaling ratio, and sets it in tsc_set_info().

Before setting the per-domain TSC scaling ratio, we check its validity
in tsc_set_info(). If an invalid ratio is given, we will leave the
default value in tsc_scaling_ratio (i.e. ratio = 1) and setup guest TSC
as if no TSC scaling is used:
* For TSC_MODE_FAULT,
  - if a user-specified TSC frequency is given, we will set the guest
    TSC frequency to it; otherwise, we set it to the host TSC frequency.
  - if guest TSC frequency does not equal to host TSC frequency, we will
    emulate guest TSC (i.e. d->arch.vtsc is set to 1). In both cases,
    guest TSC runs in the guest TSC frequency.
* For TSC_MODE_PVRDTSCP,
  - we set the guest TSC frequency to the host TSC frequency.
  - guest rdtsc is executed natively in the host TSC frequency as
    before.
  - if rdtscp is not available to guest, it will be emulated; otherwise,
    it will be executed natively. In both cases, guest rdtscp gets TSC
    in the host TSC frequency as before.

Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
---
Changes in v5:
 * Drop "Reviewed-by" from Boris Ostrovsky because of following changes.
 * Rewrite 64-bit integer arithmetic in hvm_get_tsc_scaling_ratio()
   by inlined assembly.
 * Make the previously per-vcpu tsc_scaling_ratio to struct hvm_domain
   and setup it per-domain.
---
 xen/arch/x86/hvm/hvm.c            | 26 ++++++++++++++++++++++++++
 xen/arch/x86/hvm/svm/svm.c        |  4 ++--
 xen/arch/x86/time.c               | 10 ++++++++--
 xen/include/asm-x86/hvm/domain.h  |  2 ++
 xen/include/asm-x86/hvm/hvm.h     |  8 ++++++++
 xen/include/asm-x86/hvm/svm/svm.h |  3 ---
 6 files changed, 46 insertions(+), 7 deletions(-)

diff --git a/xen/arch/x86/hvm/hvm.c b/xen/arch/x86/hvm/hvm.c
index a72a6e7..b239bdb 100644
--- a/xen/arch/x86/hvm/hvm.c
+++ b/xen/arch/x86/hvm/hvm.c
@@ -298,6 +298,29 @@ int hvm_set_guest_pat(struct vcpu *v, u64 guest_pat)
     return 1;
 }
 
+/*
+ * Get the ratio to scale host TSC frequency to gtsc_khz. zero will be
+ * returned if TSC scaling is unavailable or ratio cannot be handled
+ * by host CPU. Otherwise, a non-zero ratio will be returned.
+ */
+u64 hvm_get_tsc_scaling_ratio(u32 gtsc_khz)
+{
+    u64 ratio = gtsc_khz;
+    u64 dummy = 0;
+
+    if ( !hvm_tsc_scaling_supported )
+        return 0;
+
+    /* ratio = (gtsc_khz << hvm_funcs.tsc_scaling.ratio_frac_bits) / cpu_khz */
+    asm (
+        "shldq %2,%1,%0; salq %2,%1; divq %3"
+        : "+&d" (dummy), "+&a" (ratio)
+        : "c" (hvm_funcs.tsc_scaling.ratio_frac_bits),
+          "rm" ((u64) cpu_khz) );
+
+    return ratio > hvm_funcs.tsc_scaling.max_ratio ? 0 : ratio;
+}
+
 void hvm_set_guest_tsc_fixed(struct vcpu *v, u64 guest_tsc, u64 at_tsc)
 {
     uint64_t tsc;
@@ -1643,6 +1666,9 @@ int hvm_domain_initialise(struct domain *d)
     register_portio_handler(d, 0xe9, 1, hvm_print_line);
     register_portio_handler(d, 0xcf8, 4, hvm_access_cf8);
 
+    if ( hvm_tsc_scaling_supported )
+        d->arch.hvm_domain.tsc_scaling_ratio = hvm_default_tsc_scaling_ratio;
+
     rc = hvm_funcs.domain_initialise(d);
     if ( rc != 0 )
         goto fail2;
diff --git a/xen/arch/x86/hvm/svm/svm.c b/xen/arch/x86/hvm/svm/svm.c
index b22d4a1..1136937 100644
--- a/xen/arch/x86/hvm/svm/svm.c
+++ b/xen/arch/x86/hvm/svm/svm.c
@@ -823,7 +823,7 @@ static uint64_t svm_scale_tsc(const struct vcpu *v, uint64_t tsc)
 {
     ASSERT(cpu_has_tsc_ratio && !v->domain->arch.vtsc);
 
-    return scale_tsc(tsc, vcpu_tsc_ratio(v));
+    return scale_tsc(tsc, hvm_vcpu_tsc_scaling_ratio(v));
 }
 
 static uint64_t svm_get_tsc_offset(uint64_t host_tsc, uint64_t guest_tsc,
@@ -1000,7 +1000,7 @@ static inline void svm_tsc_ratio_save(struct vcpu *v)
 static inline void svm_tsc_ratio_load(struct vcpu *v)
 {
     if ( cpu_has_tsc_ratio && !v->domain->arch.vtsc ) 
-        wrmsrl(MSR_AMD64_TSC_RATIO, vcpu_tsc_ratio(v));
+        wrmsrl(MSR_AMD64_TSC_RATIO, hvm_vcpu_tsc_scaling_ratio(v));
 }
 
 static void svm_ctxt_switch_from(struct vcpu *v)
diff --git a/xen/arch/x86/time.c b/xen/arch/x86/time.c
index 2248dfa..fda9692 100644
--- a/xen/arch/x86/time.c
+++ b/xen/arch/x86/time.c
@@ -1865,7 +1865,8 @@ void tsc_set_info(struct domain *d,
          */
         if ( tsc_mode == TSC_MODE_DEFAULT && host_tsc_is_safe() &&
              (has_hvm_container_domain(d) ?
-              d->arch.tsc_khz == cpu_khz || hvm_tsc_scaling_supported :
+              (d->arch.tsc_khz == cpu_khz ||
+               hvm_get_tsc_scaling_ratio(d->arch.tsc_khz)) :
               incarnation == 0) )
         {
     case TSC_MODE_NEVER_EMULATE:
@@ -1879,7 +1880,8 @@ void tsc_set_info(struct domain *d,
         d->arch.vtsc = !boot_cpu_has(X86_FEATURE_RDTSCP) ||
                        !host_tsc_is_safe();
         enable_tsc_scaling = has_hvm_container_domain(d) &&
-                             hvm_tsc_scaling_supported && !d->arch.vtsc;
+                             !d->arch.vtsc &&
+                             hvm_get_tsc_scaling_ratio(gtsc_khz ?: cpu_khz);
         d->arch.tsc_khz = (enable_tsc_scaling && gtsc_khz) ? gtsc_khz : cpu_khz;
         set_time_scale(&d->arch.vtsc_to_ns, d->arch.tsc_khz * 1000 );
         d->arch.ns_to_vtsc = scale_reciprocal(d->arch.vtsc_to_ns);
@@ -1897,6 +1899,10 @@ void tsc_set_info(struct domain *d,
     d->arch.incarnation = incarnation + 1;
     if ( has_hvm_container_domain(d) )
     {
+        if ( hvm_tsc_scaling_supported && !d->arch.vtsc )
+            d->arch.hvm_domain.tsc_scaling_ratio =
+                hvm_get_tsc_scaling_ratio(d->arch.tsc_khz);
+
         hvm_set_rdtsc_exiting(d, d->arch.vtsc);
         if ( d->vcpu && d->vcpu[0] && incarnation == 0 )
         {
diff --git a/xen/include/asm-x86/hvm/domain.h b/xen/include/asm-x86/hvm/domain.h
index 4b54c5d..678f10a 100644
--- a/xen/include/asm-x86/hvm/domain.h
+++ b/xen/include/asm-x86/hvm/domain.h
@@ -143,6 +143,8 @@ struct hvm_domain {
      */
     uint64_t sync_tsc;
 
+    uint64_t tsc_scaling_ratio;
+
     unsigned long *io_bitmap;
 
     /* List of permanently write-mapped pages. */
diff --git a/xen/include/asm-x86/hvm/hvm.h b/xen/include/asm-x86/hvm/hvm.h
index 7e87b10..6264d9e 100644
--- a/xen/include/asm-x86/hvm/hvm.h
+++ b/xen/include/asm-x86/hvm/hvm.h
@@ -272,6 +272,14 @@ u64 hvm_get_guest_tsc_fixed(struct vcpu *v, u64 at_tsc);
 #define hvm_tsc_scaling_supported \
     (!!hvm_funcs.tsc_scaling.ratio_frac_bits)
 
+#define hvm_default_tsc_scaling_ratio \
+    (1ULL << hvm_funcs.tsc_scaling.ratio_frac_bits)
+
+#define hvm_vcpu_tsc_scaling_ratio(v) \
+    ((v)->domain->arch.hvm_domain.tsc_scaling_ratio)
+
+u64 hvm_get_tsc_scaling_ratio(u32 gtsc_khz);
+
 int hvm_set_mode(struct vcpu *v, int mode);
 void hvm_init_guest_time(struct domain *d);
 void hvm_set_guest_time(struct vcpu *v, u64 guest_time);
diff --git a/xen/include/asm-x86/hvm/svm/svm.h b/xen/include/asm-x86/hvm/svm/svm.h
index d60ec23..c954b7e 100644
--- a/xen/include/asm-x86/hvm/svm/svm.h
+++ b/xen/include/asm-x86/hvm/svm/svm.h
@@ -97,9 +97,6 @@ extern u32 svm_feature_flags;
 /* TSC rate */
 #define DEFAULT_TSC_RATIO       0x0000000100000000ULL
 #define TSC_RATIO_RSVD_BITS     0xffffff0000000000ULL
-#define TSC_RATIO(g_khz, h_khz) ( (((u64)(g_khz)<<32)/(u64)(h_khz)) & \
-                                  ~TSC_RATIO_RSVD_BITS )
-#define vcpu_tsc_ratio(v)       TSC_RATIO((v)->domain->arch.tsc_khz, cpu_khz)
 
 extern void svm_host_osvw_reset(void);
 extern void svm_host_osvw_init(void);
-- 
2.7.1

  parent reply	other threads:[~2016-02-23  2:05 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-23  2:04 [PATCH v5 0/6] Add VMX TSC scaling support Haozhong Zhang
2016-02-23  2:04 ` [PATCH v5 1/6] x86/hvm: Collect information of TSC scaling ratio Haozhong Zhang
2016-02-23 14:00   ` Boris Ostrovsky
2016-02-23 14:10     ` Jan Beulich
2016-02-23 14:16       ` Boris Ostrovsky
2016-02-23 15:37         ` Jan Beulich
2016-02-24  6:00           ` Haozhong Zhang
2016-02-24 13:46             ` Haozhong Zhang
2016-02-24 14:49               ` Boris Ostrovsky
2016-02-24 14:36   ` Jan Beulich
2016-02-24 15:03     ` Haozhong Zhang
2016-02-26  4:27   ` Tian, Kevin
2016-02-23  2:05 ` Haozhong Zhang [this message]
2016-02-24 15:01   ` [PATCH v5 2/6] x86/hvm: Setup " Jan Beulich
2016-02-24 15:42     ` Haozhong Zhang
2016-02-24 15:51       ` Jan Beulich
2016-02-24 16:05         ` Haozhong Zhang
2016-02-23  2:05 ` [PATCH v5 3/6] x86/hvm: Replace architecture TSC scaling by a common function Haozhong Zhang
2016-02-24 15:07   ` Jan Beulich
2016-02-26  4:30   ` Tian, Kevin
2016-02-23  2:05 ` [PATCH v5 4/6] x86/hvm: Move saving/loading vcpu's TSC to common code Haozhong Zhang
2016-02-23  2:05 ` [PATCH v5 5/6] vmx: Add VMX RDTSC(P) scaling support Haozhong Zhang
2016-02-24 15:09   ` Jan Beulich
2016-02-26  4:31   ` Tian, Kevin
2016-02-23  2:05 ` [PATCH v5 6/6] docs: Add descriptions of TSC scaling in xl.cfg and tscmode.txt Haozhong Zhang
2016-02-26  4:37   ` Tian, Kevin
2016-02-26  4:44     ` Zhang, Haozhong
2016-02-26  8:01     ` Jan Beulich
2016-02-26  8:05       ` Haozhong Zhang
2016-02-29  2:02       ` Tian, Kevin
2016-02-29  2:45         ` Zhang, Haozhong
2016-02-29  9:04           ` Jan Beulich

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1456193104-12761-3-git-send-email-haozhong.zhang@intel.com \
    --to=haozhong.zhang@intel.com \
    --cc=Aravind.Gopalakrishnan@amd.com \
    --cc=andrew.cooper3@citrix.com \
    --cc=boris.ostrovsky@oracle.com \
    --cc=jbeulich@suse.com \
    --cc=jun.nakajima@intel.com \
    --cc=keir@xen.org \
    --cc=kevin.tian@intel.com \
    --cc=suravee.suthikulpanit@amd.com \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).