From: Anthony PERARD <anthony.perard@citrix.com>
To: xen-devel@lists.xen.org
Cc: Keir Fraser <keir@xen.org>,
Stefano Stabellini <stefano.stabellini@eu.citrix.com>,
Andrew Cooper <andrew.cooper3@citrix.com>,
Ian Jackson <ian.jackson@eu.citrix.com>,
Jan Beulich <jbeulich@suse.com>,
Anthony PERARD <anthony.perard@citrix.com>,
Wei Liu <wei.liu2@citrix.com>
Subject: [PATCH v3 10/16] hvmloader: Load SeaBIOS from hvm_start_info modules
Date: Thu, 25 Feb 2016 14:56:08 +0000 [thread overview]
Message-ID: <1456412174-20162-11-git-send-email-anthony.perard@citrix.com> (raw)
In-Reply-To: <1456412174-20162-1-git-send-email-anthony.perard@citrix.com>
... and do not include the SeaBIOS ROM into hvmloader anymore.
This also fix the dependency on roms.inc, hvmloader.o does not include it.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
---
Change in V3:
- change makefile to not include seabios roms into roms.inc.
- update the struct bios_config with the location of the bios blob.
---
tools/firmware/hvmloader/Makefile | 15 +--------------
tools/firmware/hvmloader/seabios.c | 24 ++++++++++++++----------
2 files changed, 15 insertions(+), 24 deletions(-)
diff --git a/tools/firmware/hvmloader/Makefile b/tools/firmware/hvmloader/Makefile
index f2f4791..ed0bfad 100644
--- a/tools/firmware/hvmloader/Makefile
+++ b/tools/firmware/hvmloader/Makefile
@@ -45,7 +45,6 @@ CIRRUSVGA_DEBUG ?= n
OVMF_DIR := ../ovmf-dir
ROMBIOS_DIR := ../rombios
-SEABIOS_DIR := ../seabios-dir
ifeq ($(CONFIG_ROMBIOS),y)
STDVGA_ROM := ../vgabios/VGABIOS-lgpl-latest.bin
@@ -80,19 +79,13 @@ endif
ifeq ($(CONFIG_SEABIOS),y)
OBJS += seabios.o
CFLAGS += -DENABLE_SEABIOS
-ifeq ($(SEABIOS_PATH),)
- SEABIOS_ROM := $(SEABIOS_DIR)/out/bios.bin
-else
- SEABIOS_ROM := $(SEABIOS_PATH)
-endif
-ROMS += $(SEABIOS_ROM)
endif
.PHONY: all
all: subdirs-all
$(MAKE) hvmloader
-ovmf.o rombios.o seabios.o hvmloader.o: roms.inc
+ovmf.o rombios.o: roms.inc
smbios.o: CFLAGS += -D__SMBIOS_DATE__="\"$(SMBIOS_REL_DATE)\""
hvmloader: $(OBJS) acpi/acpi.a
@@ -109,12 +102,6 @@ ifneq ($(ROMBIOS_ROM),)
echo "#endif" >> $@.new
endif
-ifneq ($(SEABIOS_ROM),)
- echo "#ifdef ROM_INCLUDE_SEABIOS" >> $@.new
- sh ./mkhex seabios $(SEABIOS_ROM) >> $@.new
- echo "#endif" >> $@.new
-endif
-
ifneq ($(OVMF_ROM),)
echo "#ifdef ROM_INCLUDE_OVMF" >> $@.new
sh ./mkhex ovmf $(OVMF_ROM) >> $@.new
diff --git a/tools/firmware/hvmloader/seabios.c b/tools/firmware/hvmloader/seabios.c
index c6b3d9f..5d896e3 100644
--- a/tools/firmware/hvmloader/seabios.c
+++ b/tools/firmware/hvmloader/seabios.c
@@ -27,9 +27,6 @@
#include "smbios_types.h"
#include "acpi/acpi2_0.h"
-#define ROM_INCLUDE_SEABIOS
-#include "roms.inc"
-
extern unsigned char dsdt_anycpu_qemu_xen[];
extern int dsdt_anycpu_qemu_xen_len;
@@ -127,22 +124,29 @@ static void seabios_setup_e820(void)
struct e820entry *e820 = scratch_alloc(sizeof(struct e820entry)*16, 0);
info->e820 = (uint32_t)e820;
+ BUG_ON(seabios_config.bios_address == 0);
/* SeaBIOS reserves memory in e820 as necessary so no low reservation. */
- info->e820_nr = build_e820_table(e820, 0, 0x100000-sizeof(seabios));
+ info->e820_nr = build_e820_table(e820, 0, seabios_config.bios_address);
dump_e820_table(e820, info->e820_nr);
}
-struct bios_config seabios_config = {
- .name = "SeaBIOS",
+static void seabios_load(const struct bios_config *bios,
+ void *bios_addr, uint32_t bios_length)
+{
+ unsigned int bios_dest = 0x100000 - bios_length;
- .image = seabios,
- .image_size = sizeof(seabios),
+ BUG_ON(bios_dest + bios_length > HVMLOADER_PHYSICAL_ADDRESS);
+ memcpy((void *)bios_dest, bios_addr, bios_length);
+ seabios_config.bios_address = bios_dest;
+ seabios_config.image_size = bios_length;
+}
- .bios_address = 0x100000 - sizeof(seabios),
+struct bios_config seabios_config = {
+ .name = "SeaBIOS",
.load_roms = NULL,
- .bios_load = NULL,
+ .bios_load = seabios_load,
.bios_info_setup = seabios_setup_bios_info,
.bios_info_finish = seabios_finish_bios_info,
--
Anthony PERARD
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
next prev parent reply other threads:[~2016-02-25 14:56 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-25 14:55 [PATCH v3 00/16] Load BIOS via toolstack instead of been embedded in hvmloader Anthony PERARD
2016-02-25 14:55 ` [PATCH v3 01/16] libxc: Rework extra module initialisation Anthony PERARD
2016-03-01 11:51 ` Wei Liu
2016-03-03 16:27 ` Anthony PERARD
2016-02-25 14:56 ` [PATCH v3 02/16] libxc: Load BIOS and ACPI table into guest memory Anthony PERARD
2016-03-01 11:51 ` Wei Liu
2016-03-03 16:57 ` Anthony PERARD
2016-02-25 14:56 ` [PATCH v3 03/16] configure: #define SEABIOS_PATH and OVMF_PATH Anthony PERARD
2016-03-01 11:51 ` Wei Liu
2016-03-03 17:03 ` Anthony PERARD
2016-03-08 15:55 ` Wei Liu
2016-02-25 14:56 ` [PATCH v3 04/16] firmware/makefile: install BIOS and ACPI blob Anthony PERARD
2016-02-29 16:31 ` Jan Beulich
2016-03-03 15:44 ` Anthony PERARD
2016-02-25 14:56 ` [PATCH v3 05/16] libxl: Load guest BIOS from file Anthony PERARD
2016-03-01 11:51 ` Wei Liu
2016-03-03 17:16 ` Anthony PERARD
2016-02-25 14:56 ` [PATCH v3 06/16] libxl: Load guest ACPI table " Anthony PERARD
2016-03-01 11:51 ` Wei Liu
2016-03-03 17:12 ` Anthony PERARD
2016-03-08 15:55 ` Wei Liu
2016-02-25 14:56 ` [PATCH v3 07/16] hvmloader: Grab the hvm_start_info pointer Anthony PERARD
2016-02-29 16:37 ` Jan Beulich
2016-02-29 16:48 ` Jan Beulich
2016-02-25 14:56 ` [PATCH v3 08/16] hvmloader: Locate the BIOS blob Anthony PERARD
2016-02-29 16:56 ` Jan Beulich
2016-03-03 16:21 ` Anthony PERARD
2016-02-25 14:56 ` [PATCH v3 09/16] hvmloader: Check modules whereabouts Anthony PERARD
2016-02-29 16:58 ` Jan Beulich
2016-03-03 16:00 ` Anthony PERARD
2016-03-03 16:18 ` Jan Beulich
2016-03-03 16:34 ` Andrew Cooper
2016-02-25 14:56 ` Anthony PERARD [this message]
2016-02-29 17:02 ` [PATCH v3 10/16] hvmloader: Load SeaBIOS from hvm_start_info modules Jan Beulich
2016-03-03 16:15 ` Anthony PERARD
2016-02-25 14:56 ` [PATCH v3 11/16] hvmloader: Load OVMF from modules Anthony PERARD
2016-03-01 16:03 ` Jan Beulich
2016-03-03 17:39 ` Anthony PERARD
2016-03-05 18:05 ` Wei Liu
2016-02-25 14:56 ` [PATCH v3 12/16] hvmloader: Specific bios_load function required Anthony PERARD
2016-03-01 16:07 ` Jan Beulich
2016-02-25 14:56 ` [PATCH v3 13/16] hvmloader: Load ACPI tables from hvm_start_info module Anthony PERARD
2016-03-01 16:17 ` Jan Beulich
2016-03-03 17:59 ` Anthony PERARD
2016-03-04 8:39 ` Jan Beulich
2016-03-08 11:15 ` Anthony PERARD
2016-02-25 14:56 ` [PATCH v3 14/16] hvmloader: Compile out the qemu-xen ACPI tables Anthony PERARD
2016-03-01 16:19 ` Jan Beulich
2016-02-25 14:56 ` [PATCH v3 15/16] hvmloader: Always build-in SeaBIOS and OVMF loader Anthony PERARD
2016-03-01 16:20 ` Jan Beulich
2016-02-25 14:56 ` [PATCH v3 16/16] hvmloader: do not depend on SEABIOS_PATH or OVMF_PATH Anthony PERARD
2016-03-01 16:24 ` Jan Beulich
2016-03-03 11:38 ` Wei Liu
2016-02-25 16:16 ` [PATCH v3 00/16] Load BIOS via toolstack instead of been embedded in hvmloader Boris Ostrovsky
2016-02-25 16:43 ` Anthony PERARD
2016-03-03 18:03 ` Anthony PERARD
2016-03-04 10:57 ` Andrew Cooper
2016-03-08 11:21 ` Anthony PERARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1456412174-20162-11-git-send-email-anthony.perard@citrix.com \
--to=anthony.perard@citrix.com \
--cc=andrew.cooper3@citrix.com \
--cc=ian.jackson@eu.citrix.com \
--cc=jbeulich@suse.com \
--cc=keir@xen.org \
--cc=stefano.stabellini@eu.citrix.com \
--cc=wei.liu2@citrix.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).