From: Andrew Cooper <andrew.cooper3@citrix.com>
To: Xen-devel <xen-devel@lists.xen.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>,
Ian Jackson <Ian.Jackson@eu.citrix.com>,
Wei Liu <wei.liu2@citrix.com>
Subject: [PATCH v3 28/28] tools/libxc: Calculate xstate cpuid leaf from guest information
Date: Tue, 15 Mar 2016 15:35:24 +0000 [thread overview]
Message-ID: <1458056124-8024-29-git-send-email-andrew.cooper3@citrix.com> (raw)
In-Reply-To: <1458056124-8024-1-git-send-email-andrew.cooper3@citrix.com>
It is unsafe to generate the guests xstate leaves from host information, as it
prevents the differences between hosts from being hidden.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
---
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
v3:
* Reintroduce MPX adjustment (this series has been in development since
before the introduction of MPX upstream, and it got lost in a rebase)
---
tools/libxc/xc_cpuid_x86.c | 49 ++++++++++++++++++++++++++++++++++++----------
1 file changed, 39 insertions(+), 10 deletions(-)
diff --git a/tools/libxc/xc_cpuid_x86.c b/tools/libxc/xc_cpuid_x86.c
index 290c995..0a14cc2 100644
--- a/tools/libxc/xc_cpuid_x86.c
+++ b/tools/libxc/xc_cpuid_x86.c
@@ -398,6 +398,13 @@ static void intel_xc_cpuid_policy(xc_interface *xch,
}
}
+#define X86_XCR0_X87 (1ULL << 0)
+#define X86_XCR0_SSE (1ULL << 1)
+#define X86_XCR0_AVX (1ULL << 2)
+#define X86_XCR0_BNDREG (1ULL << 3)
+#define X86_XCR0_BNDCSR (1ULL << 4)
+#define X86_XCR0_LWP (1ULL << 62)
+
#define XSAVEOPT (1 << 0)
#define XSAVEC (1 << 1)
#define XGETBV1 (1 << 2)
@@ -407,34 +414,56 @@ static void xc_cpuid_config_xsave(xc_interface *xch,
const struct cpuid_domain_info *info,
const unsigned int *input, unsigned int *regs)
{
- if ( info->xfeature_mask == 0 )
+ uint64_t guest_xfeature_mask;
+
+ if ( info->xfeature_mask == 0 ||
+ !test_bit(X86_FEATURE_XSAVE, info->featureset) )
{
regs[0] = regs[1] = regs[2] = regs[3] = 0;
return;
}
+ guest_xfeature_mask = X86_XCR0_SSE | X86_XCR0_X87;
+
+ if ( test_bit(X86_FEATURE_AVX, info->featureset) )
+ guest_xfeature_mask |= X86_XCR0_AVX;
+
+ if ( test_bit(X86_FEATURE_MPX, info->featureset) )
+ guest_xfeature_mask |= X86_XCR0_BNDREG | X86_XCR0_BNDCSR;
+
+ if ( test_bit(X86_FEATURE_LWP, info->featureset) )
+ guest_xfeature_mask |= X86_XCR0_LWP;
+
+ /*
+ * Clamp to host mask. Should be no-op, as guest_xfeature_mask should not
+ * be able to be calculated as larger than info->xfeature_mask.
+ *
+ * TODO - see about making this a harder error.
+ */
+ guest_xfeature_mask &= info->xfeature_mask;
+
switch ( input[1] )
{
- case 0:
+ case 0:
/* EAX: low 32bits of xfeature_enabled_mask */
- regs[0] = info->xfeature_mask & 0xFFFFFFFF;
+ regs[0] = guest_xfeature_mask & 0xFFFFFFFF;
/* EDX: high 32bits of xfeature_enabled_mask */
- regs[3] = (info->xfeature_mask >> 32) & 0xFFFFFFFF;
+ regs[3] = (guest_xfeature_mask >> 32) & 0xFFFFFFFF;
/* ECX: max size required by all HW features */
{
unsigned int _input[2] = {0xd, 0x0}, _regs[4];
regs[2] = 0;
- for ( _input[1] = 2; _input[1] < 64; _input[1]++ )
+ for ( _input[1] = 2; _input[1] <= 62; _input[1]++ )
{
cpuid(_input, _regs);
if ( (_regs[0] + _regs[1]) > regs[2] )
regs[2] = _regs[0] + _regs[1];
}
}
- /* EBX: max size required by enabled features.
- * This register contains a dynamic value, which varies when a guest
- * enables or disables XSTATE features (via xsetbv). The default size
- * after reset is 576. */
+ /* EBX: max size required by enabled features.
+ * This register contains a dynamic value, which varies when a guest
+ * enables or disables XSTATE features (via xsetbv). The default size
+ * after reset is 576. */
regs[1] = 512 + 64; /* FP/SSE + XSAVE.HEADER */
break;
case 1: /* leaf 1 */
@@ -442,7 +471,7 @@ static void xc_cpuid_config_xsave(xc_interface *xch,
regs[1] = regs[2] = regs[3] = 0;
break;
case 2 ... 63: /* sub-leaves */
- if ( !(info->xfeature_mask & (1ULL << input[1])) )
+ if ( !(guest_xfeature_mask & (1ULL << input[1])) )
{
regs[0] = regs[1] = regs[2] = regs[3] = 0;
break;
--
2.1.4
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
next prev parent reply other threads:[~2016-03-15 15:35 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-15 15:34 [PATCH RFC v3 00/28] x86: Improvements to cpuid handling for guests Andrew Cooper
2016-03-15 15:34 ` [PATCH v3 01/28] xen/x86: Drop unused and non-useful feature definitions Andrew Cooper
2016-03-16 7:53 ` Konrad Rzeszutek Wilk
2016-03-16 9:49 ` Andrew Cooper
2016-03-22 14:06 ` Doug Goldstein
2016-03-22 14:38 ` Jan Beulich
2016-03-15 15:34 ` [PATCH v3 02/28] xen/x86: Rename features to be closer to the vendor definitions Andrew Cooper
2016-03-16 8:01 ` Konrad Rzeszutek Wilk
2016-03-17 19:46 ` Andrew Cooper
2016-03-15 15:34 ` [PATCH v3 03/28] xen/public: Export cpu featureset information in the public API Andrew Cooper
2016-03-16 8:32 ` Konrad Rzeszutek Wilk
2016-03-22 10:39 ` Andrew Cooper
2016-03-18 15:52 ` Jan Beulich
2016-03-15 15:35 ` [PATCH v3 04/28] xen/x86: Script to automatically process featureset information Andrew Cooper
2016-03-16 8:41 ` Konrad Rzeszutek Wilk
2016-03-15 15:35 ` [PATCH v3 05/28] xen/x86: Collect more cpuid feature leaves Andrew Cooper
2016-03-16 8:50 ` Konrad Rzeszutek Wilk
2016-03-15 15:35 ` [PATCH v3 06/28] xen/x86: Mask out unknown features from Xen's capabilities Andrew Cooper
2016-03-16 18:01 ` Konrad Rzeszutek Wilk
2016-03-15 15:35 ` [PATCH v3 07/28] xen/x86: Annotate special features Andrew Cooper
2016-03-16 18:04 ` Konrad Rzeszutek Wilk
2016-03-18 16:29 ` Jan Beulich
2016-03-15 15:35 ` [PATCH v3 08/28] xen/x86: Annotate VM applicability in featureset Andrew Cooper
2016-03-16 18:15 ` Konrad Rzeszutek Wilk
2016-03-18 16:57 ` Jan Beulich
2016-03-18 18:56 ` Andrew Cooper
2016-03-21 11:53 ` Jan Beulich
2016-03-21 13:39 ` Andrew Cooper
2016-03-15 15:35 ` [PATCH v3 09/28] xen/x86: Calculate maximum host and guest featuresets Andrew Cooper
2016-03-16 18:24 ` Konrad Rzeszutek Wilk
2016-03-18 17:09 ` Jan Beulich
2016-03-22 11:23 ` Andrew Cooper
2016-03-22 12:39 ` Jan Beulich
2016-03-22 14:37 ` Andrew Cooper
2016-03-22 14:52 ` Jan Beulich
2016-03-22 15:01 ` Andrew Cooper
2016-03-22 16:10 ` Jan Beulich
2016-03-15 15:35 ` [PATCH v3 10/28] xen/x86: Generate deep dependencies of features Andrew Cooper
2016-03-17 19:45 ` Konrad Rzeszutek Wilk
2016-03-17 20:14 ` Andrew Cooper
2016-03-17 20:32 ` Konrad Rzeszutek Wilk
2016-03-21 15:41 ` Jan Beulich
2016-03-15 15:35 ` [PATCH v3 11/28] xen/x86: Clear dependent features when clearing a cpu cap Andrew Cooper
2016-03-17 19:51 ` Konrad Rzeszutek Wilk
2016-03-17 19:56 ` Andrew Cooper
2016-03-28 15:02 ` Konrad Rzeszutek Wilk
2016-03-21 15:45 ` Jan Beulich
2016-03-15 15:35 ` [PATCH v3 12/28] xen/x86: Improve disabling of features which have dependencies Andrew Cooper
2016-03-15 15:35 ` [PATCH v3 13/28] xen/x86: Improvements to in-hypervisor cpuid sanity checks Andrew Cooper
2016-03-21 16:11 ` Jan Beulich
2016-03-22 15:30 ` Andrew Cooper
2016-03-15 15:35 ` [PATCH v3 14/28] x86/cpu: Move set_cpumask() calls into c_early_init() Andrew Cooper
2016-03-21 16:16 ` Jan Beulich
2016-03-15 15:35 ` [PATCH v3 15/28] x86/cpu: Sysctl and common infrastructure for levelling context switching Andrew Cooper
2016-03-15 17:35 ` Joao Martins
2016-03-15 19:29 ` Andrew Cooper
2016-03-15 19:34 ` Joao Martins
2016-03-21 16:23 ` Jan Beulich
2016-03-22 15:57 ` Andrew Cooper
2016-03-22 16:16 ` Jan Beulich
2016-03-15 15:35 ` [PATCH v3 16/28] x86/cpu: Rework AMD masking MSR setup Andrew Cooper
2016-03-21 16:51 ` Jan Beulich
2016-03-21 16:55 ` Andrew Cooper
2016-03-15 15:35 ` [PATCH v3 17/28] x86/cpu: Rework Intel masking/faulting setup Andrew Cooper
2016-03-21 16:44 ` Jan Beulich
2016-03-15 15:35 ` [PATCH v3 18/28] x86/cpu: Context switch cpuid masks and faulting state in context_switch() Andrew Cooper
2016-03-15 15:35 ` [PATCH v3 19/28] x86/pv: Provide custom cpumasks for PV domains Andrew Cooper
2016-03-21 16:53 ` Jan Beulich
2016-03-15 15:35 ` [PATCH v3 20/28] x86/domctl: Update PV domain cpumasks when setting cpuid policy Andrew Cooper
2016-03-21 17:06 ` Jan Beulich
2016-03-22 16:37 ` Andrew Cooper
2016-03-22 16:51 ` Jan Beulich
2016-03-15 15:35 ` [PATCH v3 21/28] xen+tools: Export maximum host and guest cpu featuresets via SYSCTL Andrew Cooper
2016-03-16 18:23 ` Wei Liu
2016-03-16 20:38 ` David Scott
2016-03-22 8:43 ` Jan Beulich
2016-03-22 20:39 ` Andrew Cooper
2016-03-15 15:35 ` [PATCH v3 22/28] tools/libxc: Modify bitmap operations to take void pointers Andrew Cooper
2016-03-16 15:24 ` Andrew Cooper
2016-03-17 12:17 ` Wei Liu
2016-03-15 15:35 ` [PATCH v3 23/28] tools/libxc: Use public/featureset.h for cpuid policy generation Andrew Cooper
2016-03-15 15:35 ` [PATCH v3 24/28] tools/libxc: Expose the automatically generated cpu featuremask information Andrew Cooper
2016-03-15 15:35 ` [PATCH v3 25/28] tools: Utility for dealing with featuresets Andrew Cooper
2016-03-16 18:23 ` Wei Liu
2016-03-15 15:35 ` [PATCH v3 26/28] tools/libxc: Wire a featureset through to cpuid policy logic Andrew Cooper
2016-03-15 15:35 ` [PATCH v3 27/28] tools/libxc: Use featuresets rather than guesswork Andrew Cooper
2016-03-15 15:35 ` Andrew Cooper [this message]
2016-03-16 18:23 ` [PATCH v3 28/28] tools/libxc: Calculate xstate cpuid leaf from guest information Wei Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1458056124-8024-29-git-send-email-andrew.cooper3@citrix.com \
--to=andrew.cooper3@citrix.com \
--cc=Ian.Jackson@eu.citrix.com \
--cc=wei.liu2@citrix.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).