From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: konrad@kernel.org, xen-devel@lists.xenproject.org,
sasha.levin@oracle.com, andrew.cooper3@citrix.com,
ross.lagerwall@citrix.com, mpohlack@amazon.de
Cc: Keir Fraser <keir@xen.org>, Jan Beulich <jbeulich@suse.com>,
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Subject: [PATCH v10 15/24] xsplice: Add support for exception tables.
Date: Wed, 27 Apr 2016 15:27:12 -0400 [thread overview]
Message-ID: <1461785241-4481-16-git-send-email-konrad.wilk@oracle.com> (raw)
In-Reply-To: <1461785241-4481-1-git-send-email-konrad.wilk@oracle.com>
From: Ross Lagerwall <ross.lagerwall@citrix.com>
Add support for exception tables contained within xSplice payloads. If an
exception occurs search either the main exception table or a particular
active payload's exception table depending on the instruction pointer.
Also we add an test-case to make sure we have an exception that
is handled.
To not grow the code-base if xSplice is not compiled in we add
certain #define to help in determining if code needs to be __init
or not.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
---
Cc: Keir Fraser <keir@xen.org>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
v3:
- s/module/payload/
- sanity checks.
- Move code around.
- s/module/payload/
v4: Use 'struct virtual_region'
v5:
- Expand test-case.
- Deal with struct exception_table_entry being const.
v6:
- Make the code have __init if not compiled with xSplice
- Remove not needed declarations.
v7:
- Make the non_canonical_addr be 0xdead000000000000ULL
- Remove casts
- Add Reviewed-by from Andrew
- Change ifdef to be !ARM
v8:
- Change dprintk XENLOG_DEBUG to XENLOG_ERR on dprintk.
- Remove pointless parentheses on 0xdead...
- Changed __INIT.. to init_or_xsplice
- Added const to sort_exception_table last parameter.
- Added __initconstrel #define
v10:
- Added Jan's Reviewed-by
---
xen/arch/x86/extable.c | 31 ++++++++++++++++++-------------
xen/arch/x86/test/xen_hello_world_func.c | 13 +++++++++++++
xen/common/xsplice.c | 25 +++++++++++++++++++++++++
xen/include/asm-x86/uaccess.h | 2 ++
xen/include/xen/xsplice.h | 19 +++++++++++++++++++
5 files changed, 77 insertions(+), 13 deletions(-)
diff --git a/xen/arch/x86/extable.c b/xen/arch/x86/extable.c
index 2a06cca..349df79 100644
--- a/xen/arch/x86/extable.c
+++ b/xen/arch/x86/extable.c
@@ -7,6 +7,7 @@
#include <xen/spinlock.h>
#include <asm/uaccess.h>
#include <xen/virtual_region.h>
+#include <xen/xsplice.h>
#define EX_FIELD(ptr, field) ((unsigned long)&(ptr)->field + (ptr)->field)
@@ -20,7 +21,7 @@ static inline unsigned long ex_cont(const struct exception_table_entry *x)
return EX_FIELD(x, cont);
}
-static int __init cmp_ex(const void *a, const void *b)
+static int init_or_xsplice cmp_ex(const void *a, const void *b)
{
const struct exception_table_entry *l = a, *r = b;
unsigned long lip = ex_addr(l);
@@ -35,7 +36,7 @@ static int __init cmp_ex(const void *a, const void *b)
}
#ifndef swap_ex
-static void __init swap_ex(void *a, void *b, int size)
+static void init_or_xsplice swap_ex(void *a, void *b, int size)
{
struct exception_table_entry *l = a, *r = b, tmp;
long delta = b - a;
@@ -48,19 +49,23 @@ static void __init swap_ex(void *a, void *b, int size)
}
#endif
-void __init sort_exception_tables(void)
+void init_or_xsplice sort_exception_table(struct exception_table_entry *start,
+ const struct exception_table_entry *stop)
{
- sort(__start___ex_table, __stop___ex_table - __start___ex_table,
- sizeof(struct exception_table_entry), cmp_ex, swap_ex);
- sort(__start___pre_ex_table,
- __stop___pre_ex_table - __start___pre_ex_table,
+ sort(start, stop - start,
sizeof(struct exception_table_entry), cmp_ex, swap_ex);
}
-static inline unsigned long
-search_one_table(const struct exception_table_entry *first,
- const struct exception_table_entry *last,
- unsigned long value)
+void __init sort_exception_tables(void)
+{
+ sort_exception_table(__start___ex_table, __stop___ex_table);
+ sort_exception_table(__start___pre_ex_table, __stop___pre_ex_table);
+}
+
+unsigned long
+search_one_extable(const struct exception_table_entry *first,
+ const struct exception_table_entry *last,
+ unsigned long value)
{
const struct exception_table_entry *mid;
long diff;
@@ -85,7 +90,7 @@ search_exception_table(unsigned long addr)
const struct virtual_region *region = find_text_region(addr);
if ( region && region->ex )
- return search_one_table(region->ex, region->ex_end - 1, addr);
+ return search_one_extable(region->ex, region->ex_end - 1, addr);
return 0;
}
@@ -94,7 +99,7 @@ unsigned long
search_pre_exception_table(struct cpu_user_regs *regs)
{
unsigned long addr = (unsigned long)regs->eip;
- unsigned long fixup = search_one_table(
+ unsigned long fixup = search_one_extable(
__start___pre_ex_table, __stop___pre_ex_table-1, addr);
if ( fixup )
{
diff --git a/xen/arch/x86/test/xen_hello_world_func.c b/xen/arch/x86/test/xen_hello_world_func.c
index 1ad002a..2e4af9c 100644
--- a/xen/arch/x86/test/xen_hello_world_func.c
+++ b/xen/arch/x86/test/xen_hello_world_func.c
@@ -5,9 +5,22 @@
#include <xen/types.h>
+#include <asm/uaccess.h>
+
+static unsigned long *non_canonical_addr = (unsigned long *)0xdead000000000000ULL;
+
/* Our replacement function for xen_extra_version. */
const char *xen_hello_world(void)
{
+ unsigned long tmp;
+ int rc;
+ /*
+ * Any BUG, or WARN_ON will contain symbol and payload name. Furthermore
+ * exceptions will be caught and processed properly.
+ */
+ rc = __get_user(tmp, non_canonical_addr);
+ BUG_ON(rc != -EFAULT);
+
return "Hello World";
}
diff --git a/xen/common/xsplice.c b/xen/common/xsplice.c
index 1eb8b5e..0456464 100644
--- a/xen/common/xsplice.c
+++ b/xen/common/xsplice.c
@@ -534,6 +534,31 @@ static int prepare_payload(struct payload *payload,
sizeof(*region->frame[i].bugs);
}
+#ifndef CONFIG_ARM
+ sec = xsplice_elf_sec_by_name(elf, ".ex_table");
+ if ( sec )
+ {
+ struct exception_table_entry *s, *e;
+
+ if ( !sec->sec->sh_size ||
+ (sec->sec->sh_size % sizeof(*region->ex)) )
+ {
+ dprintk(XENLOG_ERR, XSPLICE "%s: Wrong size of .ex_table (exp:%lu vs %lu)!\n",
+ elf->name, sizeof(*region->ex),
+ sec->sec->sh_size);
+ return -EINVAL;
+ }
+
+ s = sec->load_addr;
+ e = sec->load_addr + sec->sec->sh_size;
+
+ sort_exception_table(s ,e);
+
+ region->ex = s;
+ region->ex_end = e;
+ }
+#endif
+
return 0;
}
diff --git a/xen/include/asm-x86/uaccess.h b/xen/include/asm-x86/uaccess.h
index 947470d..5df26c2 100644
--- a/xen/include/asm-x86/uaccess.h
+++ b/xen/include/asm-x86/uaccess.h
@@ -277,5 +277,7 @@ extern struct exception_table_entry __stop___pre_ex_table[];
extern unsigned long search_exception_table(unsigned long);
extern void sort_exception_tables(void);
+extern void sort_exception_table(struct exception_table_entry *start,
+ const struct exception_table_entry *stop);
#endif /* __X86_UACCESS_H__ */
diff --git a/xen/include/xen/xsplice.h b/xen/include/xen/xsplice.h
index 84d782b..849f58c 100644
--- a/xen/include/xen/xsplice.h
+++ b/xen/include/xen/xsplice.h
@@ -14,6 +14,16 @@ struct xen_sysctl_xsplice_op;
#include <xen/elfstructs.h>
#ifdef CONFIG_XSPLICE
+/*
+ * We use alternative and exception table code - which by default are __init
+ * only, however we need them during runtime. These macros allows us to build
+ * the image with these functions built-in. (See the #else below).
+ */
+#define init_or_xsplice_const
+#define init_or_xsplice_constrel
+#define init_or_xsplice_data
+#define init_or_xsplice
+
/* Convenience define for printk. */
#define XSPLICE "xsplice: "
/* ELF payload special section names. */
@@ -70,6 +80,15 @@ void arch_xsplice_mask(void);
void arch_xsplice_unmask(void);
#else
+/*
+ * If not compiling with xSplice certain functionality should stay as
+ * __init.
+ */
+#define init_or_xsplice_const __initconst
+#define init_or_xsplice_constrel __initconstrel
+#define init_or_xsplice_data __initdata
+#define init_or_xsplice __init
+
#include <xen/errno.h> /* For -ENOSYS */
static inline int xsplice_op(struct xen_sysctl_xsplice_op *op)
{
--
2.5.0
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
next prev parent reply other threads:[~2016-04-27 19:28 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-27 19:26 [PATCH v10] xSplice v1 design and implementation Konrad Rzeszutek Wilk
2016-04-27 19:26 ` [PATCH v10 01/24] xsplice: Design document Konrad Rzeszutek Wilk
2016-04-27 19:26 ` [PATCH v10 02/24] xen/xsplice: Hypervisor implementation of XEN_XSPLICE_op Konrad Rzeszutek Wilk
2016-04-28 11:08 ` Jan Beulich
2016-04-27 19:27 ` [PATCH v10 03/24] libxc: Implementation of XEN_XSPLICE_op in libxc Konrad Rzeszutek Wilk
2016-04-27 19:27 ` [PATCH v10 04/24] xen-xsplice: Tool to manipulate xsplice payloads Konrad Rzeszutek Wilk
2016-05-01 13:34 ` George Dunlap
2016-05-01 18:08 ` Wei Liu
2016-05-02 0:50 ` Konrad Rzeszutek Wilk
2016-04-27 19:27 ` [PATCH v10 05/24] arm/x86: Use struct virtual_region to do bug, symbol, and (x86) exception tables lookup Konrad Rzeszutek Wilk
2016-04-27 19:27 ` [PATCH v10 06/24] arm/x86/vmap: Add vmalloc_xen and vm_init_type Konrad Rzeszutek Wilk
2016-04-27 19:27 ` [PATCH v10 07/24] xsplice: Add helper elf routines Konrad Rzeszutek Wilk
2016-04-28 11:17 ` Jan Beulich
2016-04-27 19:27 ` [PATCH v10 08/24] xsplice: Implement payload loading Konrad Rzeszutek Wilk
2016-04-28 11:21 ` Jan Beulich
2016-04-27 19:27 ` [PATCH v10 09/24] xsplice: Implement support for applying/reverting/replacing patches Konrad Rzeszutek Wilk
2016-04-27 19:27 ` [PATCH v10 10/24] x86/xen_hello_world.xsplice: Test payload for patching 'xen_extra_version' Konrad Rzeszutek Wilk
2016-04-28 11:25 ` Jan Beulich
2016-04-27 19:27 ` [PATCH v10 11/24] xsplice, symbols: Implement symbol name resolution on address Konrad Rzeszutek Wilk
2016-04-27 19:27 ` [PATCH v10 12/24] xsplice, symbols: Implement fast symbol names -> virtual addresses lookup Konrad Rzeszutek Wilk
2016-04-27 19:27 ` [PATCH v10 13/24] x86, xsplice: Print payload's symbol name and payload name in backtraces Konrad Rzeszutek Wilk
2016-04-27 19:27 ` [PATCH v10 14/24] xsplice: Add support for bug frames Konrad Rzeszutek Wilk
2016-04-27 19:27 ` Konrad Rzeszutek Wilk [this message]
2016-04-27 19:27 ` [PATCH v10 16/24] xsplice: Add support for alternatives Konrad Rzeszutek Wilk
2016-04-27 19:27 ` [PATCH v10 17/24] build_id: Provide ld-embedded build-ids Konrad Rzeszutek Wilk
2016-04-29 16:38 ` Jan Beulich
2016-04-29 17:23 ` Konrad Rzeszutek Wilk
2016-05-02 6:02 ` Jan Beulich
2016-05-02 11:05 ` Wei Liu
2016-05-02 11:13 ` Jan Beulich
2016-05-02 11:19 ` Wei Liu
2016-05-02 11:26 ` Jan Beulich
2016-04-27 19:27 ` [PATCH v10 18/24] xsplice: Print build_id in keyhandler and on bootup Konrad Rzeszutek Wilk
2016-04-27 19:27 ` [PATCH v10 19/24] XENVER_build_id/libxc: Provide ld-embedded build-id Konrad Rzeszutek Wilk
2016-04-27 19:27 ` [PATCH v10 20/24] libxl: info: Display build_id of the hypervisor Konrad Rzeszutek Wilk
2016-04-27 19:27 ` [PATCH v10 21/24] xsplice: Stacking build-id dependency checking Konrad Rzeszutek Wilk
2016-04-28 11:33 ` Jan Beulich
2016-05-02 6:37 ` Jan Beulich
2016-05-02 13:06 ` Konrad Rzeszutek Wilk
2016-04-27 19:27 ` [PATCH v10 22/24] xsplice/xen_replace_world: Test-case for XSPLICE_ACTION_REPLACE Konrad Rzeszutek Wilk
2016-04-28 11:35 ` Jan Beulich
2016-04-27 19:27 ` [PATCH v10 23/24] xsplice: Prevent duplicate payloads from being loaded Konrad Rzeszutek Wilk
2016-04-27 19:27 ` [PATCH v10 24/24] MAINTAINERS/xsplice: Add myself and Ross as the maintainers Konrad Rzeszutek Wilk
2016-04-28 11:47 ` [PATCH v10] xSplice v1 design and implementation Wei Liu
2016-04-28 18:16 ` [PATCH] xsplice: Don't perform multiple operations on same payload once work is scheduled Konrad Rzeszutek Wilk
2016-04-28 20:50 ` Wei Liu
2016-04-28 23:23 ` Andrew Cooper
2016-04-29 1:52 ` Konrad Rzeszutek Wilk
2016-04-29 2:15 ` Konrad Rzeszutek Wilk
2016-04-29 7:35 ` Jan Beulich
2016-04-29 7:49 ` Konrad Rzeszutek Wilk
2016-04-29 8:02 ` Jan Beulich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1461785241-4481-16-git-send-email-konrad.wilk@oracle.com \
--to=konrad.wilk@oracle.com \
--cc=andrew.cooper3@citrix.com \
--cc=jbeulich@suse.com \
--cc=keir@xen.org \
--cc=konrad@kernel.org \
--cc=mpohlack@amazon.de \
--cc=ross.lagerwall@citrix.com \
--cc=sasha.levin@oracle.com \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).