xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Julien Grall <julien.grall@arm.com>
To: xen-devel@lists.xen.org
Cc: andre.przywara@arm.com, Julien Grall <julien.grall@arm.com>,
	sstabellini@kernel.org, steve.capper@arm.com,
	wei.chen@linaro.org
Subject: [PATCH 8/9] xen/arm: traps: Avoid unnecessary VA -> IPA translation in abort handlers
Date: Wed, 22 Jun 2016 14:21:08 +0100	[thread overview]
Message-ID: <1466601669-25398-9-git-send-email-julien.grall@arm.com> (raw)
In-Reply-To: <1466601669-25398-1-git-send-email-julien.grall@arm.com>

Translating a VA to a IPA is expensive. Currently, Xen is assuming that
HPFAR_EL2 is only valid when the stage-2 data/instruction abort happened
during a translation table walk of a first stage translation (i.e S1PTW
is set).

However, based on the ARM ARM (D7.2.34 in DDI 0487A.j), the register is
also valid when the data/instruction abort occured for a translation
fault.

With this change, the VA -> IPA translation will only happen for
permission faults that are not related to a translation table of a
first stage translation.

Signed-off-by: Julien Grall <julien.grall@arm.com>
---
 xen/arch/arm/traps.c | 22 +++++++++++++++++++---
 1 file changed, 19 insertions(+), 3 deletions(-)

diff --git a/xen/arch/arm/traps.c b/xen/arch/arm/traps.c
index 591de3c..0edc2cc 100644
--- a/xen/arch/arm/traps.c
+++ b/xen/arch/arm/traps.c
@@ -2383,13 +2383,28 @@ static inline paddr_t get_faulting_ipa(vaddr_t gva)
     return ipa;
 }
 
+static inline bool hpfar_is_valid(bool s1ptw, uint8_t fsc)
+{
+    /*
+     * HPFAR is valid if one of the following cases are true:
+     *  1. the stage 2 fault happen during a stage 1 page table walk
+     *  (the bit ESR_EL2.S1PTW is set)
+     *  2. the fault was due to a translation fault
+     *
+     * Note that technically HPFAR is valid for other cases, but they
+     * are currently not supported by Xen.
+     */
+    return s1ptw || (fsc == FSC_FLT_TRANS);
+}
+
 static void do_trap_instr_abort_guest(struct cpu_user_regs *regs,
                                       const union hsr hsr)
 {
     int rc;
     register_t gva = READ_SYSREG(FAR_EL2);
+    uint8_t fsc = hsr.iabt.ifsc & ~FSC_LL_MASK;
 
-    switch ( hsr.iabt.ifsc & ~FSC_LL_MASK )
+    switch ( fsc )
     {
     case FSC_FLT_PERM:
     {
@@ -2400,7 +2415,7 @@ static void do_trap_instr_abort_guest(struct cpu_user_regs *regs,
             .kind = hsr.iabt.s1ptw ? npfec_kind_in_gpt : npfec_kind_with_gla
         };
 
-        if ( hsr.iabt.s1ptw )
+        if ( hpfar_is_valid(hsr.iabt.s1ptw, fsc) )
             gpa = get_faulting_ipa(gva);
         else
         {
@@ -2435,6 +2450,7 @@ static void do_trap_data_abort_guest(struct cpu_user_regs *regs,
     const struct hsr_dabt dabt = hsr.dabt;
     int rc;
     mmio_info_t info;
+    uint8_t fsc = hsr.dabt.dfsc & ~FSC_LL_MASK;
 
     info.dabt = dabt;
 #ifdef CONFIG_ARM_32
@@ -2443,7 +2459,7 @@ static void do_trap_data_abort_guest(struct cpu_user_regs *regs,
     info.gva = READ_SYSREG64(FAR_EL2);
 #endif
 
-    if ( dabt.s1ptw )
+    if ( hpfar_is_valid(hsr.iabt.s1ptw, fsc) )
         info.gpa = get_faulting_ipa(info.gva);
     else
     {
-- 
1.9.1


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

  parent reply	other threads:[~2016-06-22 13:21 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-22 13:21 [PATCH 0/9] xen/arm: Simplify do_trap_*_abort_guest Julien Grall
2016-06-22 13:21 ` [PATCH 1/9] xen/arm: Simply the definition of PAGE_SIZE by using the macro _AC Julien Grall
2016-07-14 11:02   ` Stefano Stabellini
2016-06-22 13:21 ` [PATCH 2/9] xen/arm: traps: Second attempt to correctly use the content of HPFAR_EL2 Julien Grall
2016-07-14 11:05   ` Stefano Stabellini
2016-06-22 13:21 ` [PATCH 3/9] xen/arm: traps: Data Abort are always unconditional Julien Grall
2016-07-14 11:06   ` Stefano Stabellini
2016-06-22 13:21 ` [PATCH 4/9] xen/arm: traps: Simplify the switch in do_trap_*_abort_guest Julien Grall
2016-07-14 11:12   ` Stefano Stabellini
2016-07-14 11:17     ` Julien Grall
2016-07-14 13:43       ` Stefano Stabellini
2016-06-22 13:21 ` [PATCH 5/9] xen/arm: Provide macros to help creating workaround helpers Julien Grall
2016-07-14 13:57   ` Stefano Stabellini
2016-07-20 12:43     ` Julien Grall
2016-07-22 15:05       ` Konrad Rzeszutek Wilk
2016-06-22 13:21 ` [PATCH 6/9] xen/arm: Use check_workaround to handle the erratum 766422 Julien Grall
2016-07-14 14:34   ` Stefano Stabellini
2016-07-14 14:39     ` Julien Grall
2016-06-22 13:21 ` [PATCH 7/9] xen/arm: traps: MMIO should only be emulated for fault translation Julien Grall
2016-07-14 15:06   ` Stefano Stabellini
2016-07-14 15:23     ` Julien Grall
2016-07-14 15:28       ` Stefano Stabellini
2016-07-14 15:29         ` Julien Grall
2016-06-22 13:21 ` Julien Grall [this message]
2016-07-14 15:27   ` [PATCH 8/9] xen/arm: traps: Avoid unnecessary VA -> IPA translation in abort handlers Stefano Stabellini
2016-07-14 15:31     ` Julien Grall
2016-07-14 15:35       ` Stefano Stabellini
2016-06-22 13:21 ` [PATCH 9/9] xen/arm: arm64: Add Cortex-A57 erratum 834220 workaround Julien Grall
2016-07-14 15:31   ` Stefano Stabellini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1466601669-25398-9-git-send-email-julien.grall@arm.com \
    --to=julien.grall@arm.com \
    --cc=andre.przywara@arm.com \
    --cc=sstabellini@kernel.org \
    --cc=steve.capper@arm.com \
    --cc=wei.chen@linaro.org \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).