From: Shanker Donthineni <shankerd@codeaurora.org>
To: xen-devel <xen-devel@lists.xensource.com>,
Julien Grall <julien.grall@arm.com>,
Stefano Stabellini <sstabellini@kernel.org>
Cc: Philip Elcan <pelcan@codeaurora.org>,
Shanker Donthineni <shankerd@codeaurora.org>,
Vikram Sethi <vikrams@codeaurora.org>
Subject: [PATCH V2 07/10] arm: vgic: Split vgic_domain_init() functionality into two functions
Date: Sun, 26 Jun 2016 12:48:20 -0500 [thread overview]
Message-ID: <1466963303-10850-8-git-send-email-shankerd@codeaurora.org> (raw)
In-Reply-To: <1466963303-10850-1-git-send-email-shankerd@codeaurora.org>
Separate the code logic that does the registration of vgic_v3/v2 ops
to a new fucntion domain_vgic_register(). The intention of this
separation is to record the required mmio count in vgic_v3/v2_init()
and pass it to function domain_io_init() in the later patch.
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
---
Changes since v1:
Moved registration of vgic_v3/v2 functionality to a new domain_vgic_register().
xen/arch/arm/vgic.c | 33 +++++++++++++++++++++------------
1 file changed, 21 insertions(+), 12 deletions(-)
diff --git a/xen/arch/arm/vgic.c b/xen/arch/arm/vgic.c
index 5df5f01..7627eff 100644
--- a/xen/arch/arm/vgic.c
+++ b/xen/arch/arm/vgic.c
@@ -88,19 +88,8 @@ static void vgic_rank_init(struct vgic_irq_rank *rank, uint8_t index,
rank->vcpu[i] = vcpu;
}
-int domain_vgic_init(struct domain *d, unsigned int nr_spis)
+static int domain_vgic_register(struct domain *d)
{
- int i;
- int ret;
-
- d->arch.vgic.ctlr = 0;
-
- /* Limit the number of virtual SPIs supported to (1020 - 32) = 988 */
- if ( nr_spis > (1020 - NR_LOCAL_IRQS) )
- return -EINVAL;
-
- d->arch.vgic.nr_spis = nr_spis;
-
switch ( d->arch.vgic.version )
{
#ifdef CONFIG_HAS_GICV3
@@ -119,6 +108,26 @@ int domain_vgic_init(struct domain *d, unsigned int nr_spis)
return -ENODEV;
}
+ return 0;
+}
+
+int domain_vgic_init(struct domain *d, unsigned int nr_spis)
+{
+ int i;
+ int ret;
+
+ d->arch.vgic.ctlr = 0;
+
+ /* Limit the number of virtual SPIs supported to (1020 - 32) = 988 */
+ if ( nr_spis > (1020 - NR_LOCAL_IRQS) )
+ return -EINVAL;
+
+ d->arch.vgic.nr_spis = nr_spis;
+
+ ret = domain_vgic_register(d);
+ if ( ret < 0)
+ return ret;
+
spin_lock_init(&d->arch.vgic.lock);
d->arch.vgic.shared_irqs =
--
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
next prev parent reply other threads:[~2016-06-26 17:48 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-26 17:48 [PATCH V2 00/10] Add support for parsing per CPU Redistributor entry Shanker Donthineni
2016-06-26 17:48 ` [PATCH V2 01/10] arm/gic-v3: Fix bug in function cmp_rdist() Shanker Donthineni
2016-06-27 11:03 ` Julien Grall
2016-06-27 13:41 ` Shanker Donthineni
2016-06-26 17:48 ` [PATCH V2 02/10] arm/gic-v3: Do early GICD ioremap and clean up Shanker Donthineni
2016-06-27 11:08 ` Julien Grall
2016-06-26 17:48 ` [PATCH V2 03/10] arm/gic-v3: Fold GICR subtable parsing into a new function Shanker Donthineni
2016-06-27 11:26 ` Julien Grall
2016-06-27 13:50 ` Shanker Donthineni
2016-06-27 15:40 ` Shanker Donthineni
2016-06-27 15:41 ` Julien Grall
2016-06-27 16:07 ` Shanker Donthineni
2016-06-27 16:09 ` Julien Grall
2016-06-27 16:17 ` Shanker Donthineni
2016-06-27 16:20 ` Julien Grall
2016-06-26 17:48 ` [PATCH V2 04/10] arm/gic-v3: Parse per-cpu redistributor entry in GICC subtable Shanker Donthineni
2016-06-27 11:47 ` Julien Grall
2016-06-27 14:17 ` Shanker Donthineni
2016-06-27 15:13 ` Julien Grall
2016-06-26 17:48 ` [PATCH V2 05/10] xen/arm: vgic: Use dynamic memory allocation for vgic_rdist_region Shanker Donthineni
2016-06-27 12:38 ` Julien Grall
2016-06-27 12:43 ` Andrew Cooper
2016-06-27 14:28 ` Shanker Donthineni
2016-06-26 17:48 ` [PATCH V2 06/10] arm/gic-v3: Remove an unused macro MAX_RDIST_COUNT Shanker Donthineni
2016-06-27 13:52 ` Julien Grall
2016-06-26 17:48 ` Shanker Donthineni [this message]
2016-06-27 12:45 ` [PATCH V2 07/10] arm: vgic: Split vgic_domain_init() functionality into two functions Julien Grall
2016-06-26 17:48 ` [PATCH V2 08/10] arm/io: Use separate memory allocation for mmio handlers Shanker Donthineni
2016-06-27 13:55 ` Julien Grall
2016-06-26 17:48 ` [PATCH V2 09/10] xen/arm: io: Use binary search for mmio handler lookup Shanker Donthineni
2016-06-27 13:31 ` Julien Grall
2016-06-27 14:50 ` Shanker Donthineni
2016-06-27 15:27 ` Julien Grall
2016-06-26 17:48 ` [PATCH V2 10/10] arm/vgic: Change fixed number of mmio handlers to variable number Shanker Donthineni
2016-06-27 13:35 ` Julien Grall
2016-06-27 15:02 ` Shanker Donthineni
2016-06-28 10:51 ` Julien Grall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1466963303-10850-8-git-send-email-shankerd@codeaurora.org \
--to=shankerd@codeaurora.org \
--cc=julien.grall@arm.com \
--cc=pelcan@codeaurora.org \
--cc=sstabellini@kernel.org \
--cc=vikrams@codeaurora.org \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).