xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Shanker Donthineni <shankerd@codeaurora.org>
To: xen-devel <xen-devel@lists.xensource.com>,
	Julien Grall <julien.grall@arm.com>,
	Stefano Stabellini <sstabellini@kernel.org>
Cc: Philip Elcan <pelcan@codeaurora.org>,
	Shanker Donthineni <shankerd@codeaurora.org>,
	Vikram Sethi <vikrams@codeaurora.org>
Subject: [PATCH V3 02/10] arm/gic-v3: Do early GICD ioremap and clean up
Date: Mon, 27 Jun 2016 15:33:34 -0500	[thread overview]
Message-ID: <1467059622-14786-2-git-send-email-shankerd@codeaurora.org> (raw)
In-Reply-To: <1467059622-14786-1-git-send-email-shankerd@codeaurora.org>

For ACPI based XEN boot, the GICD region needs to be accessed inside
the function gicv3_acpi_init() in later patch. There is a duplicate
panic() message, one in the DTS probe and second one in the ACPI probe
path. For these two reasons, move the code that validates the GICD base
address and does the region ioremap to a separate function. The
following patch accesses the GICD region inside gicv3_acpi_init() for
finding per CPU Redistributor size.

Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Acked-by: Julien Grall <julien.grall@arm.com>
---
Changes sicne v1:
  Edited commit text.

 xen/arch/arm/gic-v3.c | 23 +++++++++++++----------
 1 file changed, 13 insertions(+), 10 deletions(-)

diff --git a/xen/arch/arm/gic-v3.c b/xen/arch/arm/gic-v3.c
index 166f1c1..1f8fbc4 100644
--- a/xen/arch/arm/gic-v3.c
+++ b/xen/arch/arm/gic-v3.c
@@ -1169,6 +1169,17 @@ static void __init gicv3_init_v2(void)
     vgic_v2_setup_hw(dbase, cbase, csize, vbase, 0);
 }
 
+static void __init gicv3_ioremap_distributor(paddr_t dist_paddr)
+{
+    if ( dist_paddr & ~PAGE_MASK )
+        panic("GICv3:  Found unaligned distributor address %"PRIpaddr"",
+              dbase);
+
+    gicv3.map_dbase = ioremap_nocache(dist_paddr, SZ_64K);
+    if ( !gicv3.map_dbase )
+        panic("GICv3: Failed to ioremap for GIC distributor\n");
+}
+
 static void __init gicv3_dt_init(void)
 {
     struct rdist_region *rdist_regs;
@@ -1179,9 +1190,7 @@ static void __init gicv3_dt_init(void)
     if ( res )
         panic("GICv3: Cannot find a valid distributor address");
 
-    if ( (dbase & ~PAGE_MASK) )
-        panic("GICv3:  Found unaligned distributor address %"PRIpaddr"",
-              dbase);
+    gicv3_ioremap_distributor(dbase);
 
     if ( !dt_property_read_u32(node, "#redistributor-regions",
                 &gicv3.rdist_count) )
@@ -1402,9 +1411,7 @@ static void __init gicv3_acpi_init(void)
     if ( count <= 0 )
         panic("GICv3: No valid GICD entries exists");
 
-    if ( (dbase & ~PAGE_MASK) )
-        panic("GICv3: Found unaligned distributor address %"PRIpaddr"",
-              dbase);
+    gicv3_ioremap_distributor(dbase);
 
     /* Get number of redistributor */
     count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_REDISTRIBUTOR,
@@ -1476,10 +1483,6 @@ static int __init gicv3_init(void)
     else
         gicv3_acpi_init();
 
-    gicv3.map_dbase = ioremap_nocache(dbase, SZ_64K);
-    if ( !gicv3.map_dbase )
-        panic("GICv3: Failed to ioremap for GIC distributor\n");
-
     reg = readl_relaxed(GICD + GICD_PIDR2) & GIC_PIDR2_ARCH_MASK;
     if ( reg != GIC_PIDR2_ARCH_GICv3 && reg != GIC_PIDR2_ARCH_GICv4 )
          panic("GICv3: no distributor detected\n");
-- 
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc. 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, 
a Linux Foundation Collaborative Project


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

  reply	other threads:[~2016-06-27 20:33 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-27 20:33 [PATCH V3 01/10] arm/gic-v3: Use acpi_table_parse_madt() to parse MADT subtables Shanker Donthineni
2016-06-27 20:33 ` Shanker Donthineni [this message]
2016-06-27 20:33 ` [PATCH V3 03/10] arm/gic-v3: Move GICR subtable parsing into a new function Shanker Donthineni
2016-06-28 10:36   ` Julien Grall
2016-06-27 20:33 ` [PATCH V3 04/10] arm/gic-v3: Parse per-cpu redistributor entry in GICC subtable Shanker Donthineni
2016-06-28 10:40   ` Julien Grall
2016-06-28 13:51     ` Shanker Donthineni
2016-06-28 14:33       ` Shanker Donthineni
2016-07-06 11:30         ` Julien Grall
2016-07-14 14:01   ` Julien Grall
2016-06-27 20:33 ` [PATCH V3 05/10] xen/arm: vgic: Use dynamic memory allocation for vgic_rdist_region Shanker Donthineni
2016-06-28 10:42   ` Julien Grall
2016-06-27 20:33 ` [PATCH v3 06/10] arm/gic-v3: Remove an unused macro MAX_RDIST_COUNT Shanker Donthineni
2016-06-27 20:33 ` [PATCH V3 07/10] arm: vgic: Split vgic_domain_init() functionality into two functions Shanker Donthineni
2016-06-28 10:44   ` Julien Grall
2016-06-27 20:33 ` [PATCH V3 08/10] arm/io: Use separate memory allocation for mmio handlers Shanker Donthineni
2016-06-27 20:33 ` [PATCH V3 09/10] xen/arm: io: Use binary search for mmio handler lookup Shanker Donthineni
2016-06-28 10:13   ` Julien Grall
2016-06-28 10:49   ` Julien Grall
2016-06-28 13:19     ` Shanker Donthineni
2016-06-28 13:29       ` Julien Grall
2016-06-27 20:33 ` [PATCH V3 10/10] arm/vgic: Change fixed number of mmio handlers to variable number Shanker Donthineni
2016-06-28 10:30 ` [PATCH V3 01/10] arm/gic-v3: Use acpi_table_parse_madt() to parse MADT subtables Julien Grall
2016-07-14 14:18 ` Stefano Stabellini
2016-07-14 15:30   ` Shanker Donthineni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1467059622-14786-2-git-send-email-shankerd@codeaurora.org \
    --to=shankerd@codeaurora.org \
    --cc=julien.grall@arm.com \
    --cc=pelcan@codeaurora.org \
    --cc=sstabellini@kernel.org \
    --cc=vikrams@codeaurora.org \
    --cc=xen-devel@lists.xensource.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).