From: Shanker Donthineni <shankerd@codeaurora.org>
To: xen-devel <xen-devel@lists.xensource.com>,
Julien Grall <julien.grall@arm.com>,
Stefano Stabellini <sstabellini@kernel.org>
Cc: Philip Elcan <pelcan@codeaurora.org>,
Shanker Donthineni <shankerd@codeaurora.org>,
Vikram Sethi <vikrams@codeaurora.org>
Subject: [PATCH V3 04/10] arm/gic-v3: Parse per-cpu redistributor entry in GICC subtable
Date: Mon, 27 Jun 2016 15:33:36 -0500 [thread overview]
Message-ID: <1467059622-14786-4-git-send-email-shankerd@codeaurora.org> (raw)
In-Reply-To: <1467059622-14786-1-git-send-email-shankerd@codeaurora.org>
The redistributor address can be specified either as part of GICC or
GICR subtable depending on the power domain. The current driver
doesn't support parsing redistributor entry that is defined in GICC
subtable. The GIC CPU subtable entry holds the associated Redistributor
base address if it is not on always-on power domain.
The per CPU Redistributor size is not defined in ACPI specification.
Set the GICR region size to SZ_256K if the GIC hardware is capable of
Direct Virtual LPI Injection feature, SZ_128K otherwise.
This patch adds necessary code to handle both types of Redistributors
base addresses.
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
---
Changes since v2:
Removed the unnecessary validation checks and edited commit text.
xen/arch/arm/gic-v3.c | 68 +++++++++++++++++++++++++++++++++++----
xen/include/asm-arm/gic.h | 1 +
xen/include/asm-arm/gic_v3_defs.h | 1 +
3 files changed, 63 insertions(+), 7 deletions(-)
diff --git a/xen/arch/arm/gic-v3.c b/xen/arch/arm/gic-v3.c
index efdb56b..352799e 100644
--- a/xen/arch/arm/gic-v3.c
+++ b/xen/arch/arm/gic-v3.c
@@ -659,6 +659,10 @@ static int __init gicv3_populate_rdist(void)
smp_processor_id(), i, ptr);
return 0;
}
+
+ if ( gicv3.rdist_regions[i].single_rdist )
+ break;
+
if ( gicv3.rdist_stride )
ptr += gicv3.rdist_stride;
else
@@ -1282,14 +1286,21 @@ static int gicv3_iomem_deny_access(const struct domain *d)
}
#ifdef CONFIG_ACPI
-static void __init gic_acpi_add_rdist_region(paddr_t base, paddr_t size)
+static void __init
+gic_acpi_add_rdist_region(paddr_t base, paddr_t size, bool single_rdist)
{
unsigned int idx = gicv3.rdist_count++;
+ gicv3.rdist_regions[idx].single_rdist = single_rdist;
gicv3.rdist_regions[idx].base = base;
gicv3.rdist_regions[idx].size = size;
}
+static inline bool gic_dist_supports_dvis(void)
+{
+ return !!(readl_relaxed(GICD + GICD_TYPER) & GICD_TYPER_DVIS);
+}
+
static int gicv3_make_hwdom_madt(const struct domain *d, u32 offset)
{
struct acpi_subtable_header *header;
@@ -1397,6 +1408,36 @@ gic_acpi_parse_madt_distributor(struct acpi_subtable_header *header,
}
static int __init
+gic_acpi_parse_cpu_redistributor(struct acpi_subtable_header *header,
+ const unsigned long end)
+{
+ struct acpi_madt_generic_interrupt *processor;
+ u32 size;
+
+ processor = (struct acpi_madt_generic_interrupt *)header;
+ if ( !(processor->flags & ACPI_MADT_ENABLED) )
+ return 0;
+
+ size = gic_dist_supports_dvis() ? 4 * SZ_64K : 2 * SZ_64K;
+ gic_acpi_add_rdist_region(processor->gicr_base_address, size, true);
+
+ return 0;
+}
+
+static int __init
+gic_acpi_get_madt_cpu_num(struct acpi_subtable_header *header,
+ const unsigned long end)
+{
+ struct acpi_madt_generic_interrupt *cpuif;
+
+ cpuif = (struct acpi_madt_generic_interrupt *)header;
+ if ( BAD_MADT_ENTRY(cpuif, end) || !cpuif->gicr_base_address )
+ return -EINVAL;
+
+ return 0;
+}
+
+static int __init
gic_acpi_parse_madt_redistributor(struct acpi_subtable_header *header,
const unsigned long end)
{
@@ -1406,7 +1447,7 @@ gic_acpi_parse_madt_redistributor(struct acpi_subtable_header *header,
if ( BAD_MADT_ENTRY(rdist, end) )
return -EINVAL;
- gic_acpi_add_rdist_region(rdist->base_address, rdist->length);
+ gic_acpi_add_rdist_region(rdist->base_address, rdist->length, false);
return 0;
}
@@ -1424,6 +1465,7 @@ gic_acpi_get_madt_redistributor_num(struct acpi_subtable_header *header,
static void __init gicv3_acpi_init(void)
{
struct rdist_region *rdist_regs;
+ bool gicr_table = true;
int count;
/*
@@ -1440,8 +1482,15 @@ static void __init gicv3_acpi_init(void)
/* Get number of redistributor */
count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_REDISTRIBUTOR,
gic_acpi_get_madt_redistributor_num, 0);
- if ( count <= 0 )
- panic("GICv3: No valid GICR entries exists");
+ /* Count the total number of CPU interface entries */
+ if ( count <= 0 ) {
+ count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_INTERRUPT,
+ gic_acpi_get_madt_cpu_num, 0);
+ if (count <= 0)
+ panic("GICv3: No valid GICR entries exists");
+
+ gicr_table = false;
+ }
if ( count > MAX_RDIST_COUNT )
panic("GICv3: Number of redistributor regions is more than"
@@ -1453,9 +1502,14 @@ static void __init gicv3_acpi_init(void)
gicv3.rdist_regions = rdist_regs;
- /* Parse always-on power domain Re-distributor entries */
- count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_REDISTRIBUTOR,
- gic_acpi_parse_madt_redistributor, count);
+ if ( gicr_table )
+ /* Parse always-on power domain Re-distributor entries */
+ count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_REDISTRIBUTOR,
+ gic_acpi_parse_madt_redistributor, count);
+ else
+ /* Parse Re-distributor entries described in CPU interface table */
+ count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_INTERRUPT,
+ gic_acpi_parse_cpu_redistributor, count);
if ( count <= 0 )
panic("GICv3: Can't get Redistributor entry");
diff --git a/xen/include/asm-arm/gic.h b/xen/include/asm-arm/gic.h
index 44b9ef6..fedf1fa 100644
--- a/xen/include/asm-arm/gic.h
+++ b/xen/include/asm-arm/gic.h
@@ -101,6 +101,7 @@
#define GICD_TYPE_CPUS_SHIFT 5
#define GICD_TYPE_CPUS 0x0e0
#define GICD_TYPE_SEC 0x400
+#define GICD_TYPER_DVIS (1U << 18)
#define GICC_CTL_ENABLE 0x1
#define GICC_CTL_EOI (0x1 << 9)
diff --git a/xen/include/asm-arm/gic_v3_defs.h b/xen/include/asm-arm/gic_v3_defs.h
index 6d98491..6bd25a5 100644
--- a/xen/include/asm-arm/gic_v3_defs.h
+++ b/xen/include/asm-arm/gic_v3_defs.h
@@ -141,6 +141,7 @@ struct rdist_region {
paddr_t base;
paddr_t size;
void __iomem *map_base;
+ bool single_rdist;
};
#endif /* __ASM_ARM_GIC_V3_DEFS_H__ */
--
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
next prev parent reply other threads:[~2016-06-27 20:33 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-27 20:33 [PATCH V3 01/10] arm/gic-v3: Use acpi_table_parse_madt() to parse MADT subtables Shanker Donthineni
2016-06-27 20:33 ` [PATCH V3 02/10] arm/gic-v3: Do early GICD ioremap and clean up Shanker Donthineni
2016-06-27 20:33 ` [PATCH V3 03/10] arm/gic-v3: Move GICR subtable parsing into a new function Shanker Donthineni
2016-06-28 10:36 ` Julien Grall
2016-06-27 20:33 ` Shanker Donthineni [this message]
2016-06-28 10:40 ` [PATCH V3 04/10] arm/gic-v3: Parse per-cpu redistributor entry in GICC subtable Julien Grall
2016-06-28 13:51 ` Shanker Donthineni
2016-06-28 14:33 ` Shanker Donthineni
2016-07-06 11:30 ` Julien Grall
2016-07-14 14:01 ` Julien Grall
2016-06-27 20:33 ` [PATCH V3 05/10] xen/arm: vgic: Use dynamic memory allocation for vgic_rdist_region Shanker Donthineni
2016-06-28 10:42 ` Julien Grall
2016-06-27 20:33 ` [PATCH v3 06/10] arm/gic-v3: Remove an unused macro MAX_RDIST_COUNT Shanker Donthineni
2016-06-27 20:33 ` [PATCH V3 07/10] arm: vgic: Split vgic_domain_init() functionality into two functions Shanker Donthineni
2016-06-28 10:44 ` Julien Grall
2016-06-27 20:33 ` [PATCH V3 08/10] arm/io: Use separate memory allocation for mmio handlers Shanker Donthineni
2016-06-27 20:33 ` [PATCH V3 09/10] xen/arm: io: Use binary search for mmio handler lookup Shanker Donthineni
2016-06-28 10:13 ` Julien Grall
2016-06-28 10:49 ` Julien Grall
2016-06-28 13:19 ` Shanker Donthineni
2016-06-28 13:29 ` Julien Grall
2016-06-27 20:33 ` [PATCH V3 10/10] arm/vgic: Change fixed number of mmio handlers to variable number Shanker Donthineni
2016-06-28 10:30 ` [PATCH V3 01/10] arm/gic-v3: Use acpi_table_parse_madt() to parse MADT subtables Julien Grall
2016-07-14 14:18 ` Stefano Stabellini
2016-07-14 15:30 ` Shanker Donthineni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1467059622-14786-4-git-send-email-shankerd@codeaurora.org \
--to=shankerd@codeaurora.org \
--cc=julien.grall@arm.com \
--cc=pelcan@codeaurora.org \
--cc=sstabellini@kernel.org \
--cc=vikrams@codeaurora.org \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).