From: Boris Ostrovsky <boris.ostrovsky@oracle.com>
To: xen-devel@lists.xen.org
Cc: wei.liu2@citrix.com, andrew.cooper3@citrix.com,
ian.jackson@eu.citrix.com, julien.grall@arm.com,
jbeulich@suse.com, zhaoshenglong@huawei.com,
boris.ostrovsky@oracle.com, roger.pau@citrix.com
Subject: [PATCH v1 03/20] acpi/hvmloader: Initialize vm_gid data outside ACPI code
Date: Tue, 5 Jul 2016 15:05:02 -0400 [thread overview]
Message-ID: <1467745519-9868-4-git-send-email-boris.ostrovsky@oracle.com> (raw)
In-Reply-To: <1467745519-9868-1-git-send-email-boris.ostrovsky@oracle.com>
This way ACPI code won't use xenstore-read() and hvm_param_set()
which are private to hvmloader.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
---
This is one patch that modifies config->ainfo.vm_gid_addr in build.c, with that change
consumed by the caller (when it sets VM_PARAM_VM_GENERATION_ID_ADDR). We could
make the caller fill out config->ainfo.vm_gid_addr to avoid this as suggested by Jan but
I think logically this belongs in the ACPI builder.
tools/firmware/hvmloader/acpi/build.c | 30 +++++++++++-------------------
tools/firmware/hvmloader/acpi/libacpi.h | 2 ++
tools/firmware/hvmloader/util.c | 16 ++++++++++++++++
3 files changed, 29 insertions(+), 19 deletions(-)
diff --git a/tools/firmware/hvmloader/acpi/build.c b/tools/firmware/hvmloader/acpi/build.c
index 1092b4e..ca9727f 100644
--- a/tools/firmware/hvmloader/acpi/build.c
+++ b/tools/firmware/hvmloader/acpi/build.c
@@ -446,32 +446,24 @@ static int construct_secondary_tables(unsigned long *table_ptrs,
*
* Return 0 if memory failure, != 0 if success
*/
-static int new_vm_gid(struct acpi_info *acpi_info)
+static int new_vm_gid(struct acpi_config *config)
{
- uint64_t vm_gid[2], *buf;
- const char * s;
- char *end;
-
- acpi_info->vm_gid_addr = 0;
-
- /* read ID and check for 0 */
- s = xenstore_read("platform/generation-id", "0:0");
- vm_gid[0] = strtoll(s, &end, 0);
- vm_gid[1] = 0;
- if ( end && end[0] == ':' )
- vm_gid[1] = strtoll(end+1, NULL, 0);
- if ( !vm_gid[0] && !vm_gid[1] )
+ uint64_t *buf;
+
+ config->ainfo.vm_gid_addr = 0;
+
+ /* check for 0 ID*/
+ if ( !config->vm_gid[0] && !config->vm_gid[1] )
return 1;
/* copy to allocate BIOS memory */
- buf = (uint64_t *) mem_alloc(sizeof(vm_gid), 8);
+ buf = (uint64_t *) mem_alloc(sizeof(config->vm_gid), 8);
if ( !buf )
return 0;
- memcpy(buf, vm_gid, sizeof(vm_gid));
+ memcpy(buf, config->vm_gid, sizeof(config->vm_gid));
/* set into ACPI table and HVM param the address */
- acpi_info->vm_gid_addr = virt_to_phys(buf);
- hvm_param_set(HVM_PARAM_VM_GENERATION_ID_ADDR, acpi_info->vm_gid_addr);
+ config->ainfo.vm_gid_addr = virt_to_phys(buf);
return 1;
}
@@ -593,7 +585,7 @@ void acpi_build_tables(struct acpi_config *config)
offsetof(struct acpi_20_rsdp, extended_checksum),
sizeof(struct acpi_20_rsdp));
- if ( !new_vm_gid(&config->ainfo) )
+ if ( !new_vm_gid(config) )
goto oom;
*(struct acpi_info *)config->ainfop = config->ainfo;
diff --git a/tools/firmware/hvmloader/acpi/libacpi.h b/tools/firmware/hvmloader/acpi/libacpi.h
index 098eee1..aa19972 100644
--- a/tools/firmware/hvmloader/acpi/libacpi.h
+++ b/tools/firmware/hvmloader/acpi/libacpi.h
@@ -52,6 +52,8 @@ struct acpi_config {
const unsigned char *dsdt_15cpu;
unsigned int dsdt_15cpu_len;
+ uint64_t vm_gid[2];
+
/* May have some fields updated by acpi_build_table() */
struct acpi_info ainfo;
/*
diff --git a/tools/firmware/hvmloader/util.c b/tools/firmware/hvmloader/util.c
index 4293efa..e62052b 100644
--- a/tools/firmware/hvmloader/util.c
+++ b/tools/firmware/hvmloader/util.c
@@ -27,6 +27,7 @@
#include <xen/xen.h>
#include <xen/memory.h>
#include <xen/sched.h>
+#include <xen/hvm/params.h>
/*
* Check whether there exists overlap in the specified memory range.
@@ -861,6 +862,8 @@ int hpet_exists(unsigned long hpet_base)
void hvmloader_acpi_build_tables(struct acpi_config *config,
unsigned int physical)
{
+ const char *s;
+
/* Allocate and initialise the acpi info area. */
mem_hole_populate_ram(ACPI_INFO_PHYSICAL_ADDRESS >> PAGE_SHIFT, 1);
@@ -876,10 +879,23 @@ void hvmloader_acpi_build_tables(struct acpi_config *config,
config->ainfo.pci_hi_len = pci_hi_mem_end - pci_hi_mem_start;
}
+ s = xenstore_read("platform/generation-id", "0:0");
+ if ( s )
+ {
+ char *end;
+
+ config->vm_gid[0] = strtoll(s, &end, 0);
+ config->vm_gid[1] = 0;
+ if ( end && end[0] == ':' )
+ config->vm_gid[1] = strtoll(end+1, NULL, 0);
+ }
+
config->rsdp = physical;
config->ainfop = ACPI_INFO_PHYSICAL_ADDRESS;
acpi_build_tables(config);
+
+ hvm_param_set(HVM_PARAM_VM_GENERATION_ID_ADDR, config->ainfo.vm_gid_addr);
}
/*
--
1.7.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
next prev parent reply other threads:[~2016-07-05 19:05 UTC|newest]
Thread overview: 104+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-05 19:04 [PATCH v1 00/20] Make ACPI builder available to components other than hvmloader Boris Ostrovsky
2016-07-05 19:05 ` [PATCH v1 01/20] hvmloader: Provide hvmloader_acpi_build_tables() Boris Ostrovsky
2016-07-06 14:47 ` Konrad Rzeszutek Wilk
2016-07-08 9:52 ` Jan Beulich
2016-07-05 19:05 ` [PATCH v1 02/20] acpi/hvmloader: Move acpi_info initialization out of ACPI code Boris Ostrovsky
2016-07-07 16:58 ` Ian Jackson
2016-07-07 17:09 ` Boris Ostrovsky
2016-07-07 17:15 ` Wei Liu
2016-07-07 17:45 ` Boris Ostrovsky
2016-07-08 15:06 ` Konrad Rzeszutek Wilk
2016-07-08 15:50 ` Ian Jackson
2016-07-08 15:57 ` Boris Ostrovsky
2016-07-08 16:21 ` Ian Jackson
2016-07-11 12:10 ` Wei Liu
2016-07-11 14:47 ` Lars Kurth
2016-07-11 14:54 ` Konrad Rzeszutek Wilk
2016-07-11 15:06 ` Boris Ostrovsky
2016-07-11 15:38 ` Ian Jackson
2016-07-11 15:47 ` Ian Jackson
2016-07-11 16:07 ` Boris Ostrovsky
2016-07-08 10:10 ` Jan Beulich
2016-07-08 14:39 ` Boris Ostrovsky
2016-07-08 15:11 ` Jan Beulich
2016-07-08 16:14 ` Boris Ostrovsky
2016-08-01 10:09 ` Jan Beulich
2016-08-01 14:06 ` Boris Ostrovsky
2016-08-01 14:18 ` Jan Beulich
2016-07-05 19:05 ` Boris Ostrovsky [this message]
2016-07-08 10:18 ` [PATCH v1 03/20] acpi/hvmloader: Initialize vm_gid data outside " Jan Beulich
2016-07-05 19:05 ` [PATCH v1 04/20] acpi/hvmloader: Decide which SSDTs to install in hvmloader Boris Ostrovsky
2016-07-08 10:27 ` Jan Beulich
2016-07-05 19:05 ` [PATCH v1 05/20] acpi/hvmloader: Move passthrough initialization from ACPI code Boris Ostrovsky
2016-07-08 10:46 ` Jan Beulich
2016-07-05 19:05 ` [PATCH v1 06/20] acpi/hvmloader: Collect processor and NUMA info in hvmloader Boris Ostrovsky
2016-07-08 13:36 ` Jan Beulich
2016-07-08 15:08 ` Boris Ostrovsky
2016-07-08 15:14 ` Jan Beulich
2016-07-05 19:05 ` [PATCH v1 07/20] acpi/hvmloader: Set TIS header address " Boris Ostrovsky
2016-07-08 13:38 ` Jan Beulich
2016-07-05 19:05 ` [PATCH v1 08/20] acpi/hvmloader: Make providing IOAPIC in MADT optional Boris Ostrovsky
2016-07-08 13:41 ` Jan Beulich
2016-07-05 19:05 ` [PATCH v1 09/20] acpi/hvmloader: Build WAET optionally Boris Ostrovsky
2016-07-08 13:42 ` Jan Beulich
2016-07-05 19:05 ` [PATCH v1 10/20] acpi/hvmloader: Replace mem_alloc() and virt_to_phys() with memory ops Boris Ostrovsky
2016-07-08 13:58 ` Jan Beulich
2016-07-08 15:23 ` Boris Ostrovsky
2016-07-08 15:35 ` Jan Beulich
2016-07-08 16:19 ` Boris Ostrovsky
2016-07-19 9:11 ` Jan Beulich
2016-07-19 14:08 ` Boris Ostrovsky
2016-07-05 19:05 ` [PATCH v1 11/20] acpi/hvmloader: Translate all addresses when assigning addresses in ACPI tables Boris Ostrovsky
2016-07-08 14:31 ` Jan Beulich
2016-07-05 19:05 ` [PATCH v1 12/20] acpi/hvmloader: Link ACPI object files directly Boris Ostrovsky
2016-07-08 14:51 ` Jan Beulich
2016-07-08 15:41 ` Boris Ostrovsky
2016-07-05 19:05 ` [PATCH v1 13/20] acpi/hvmloader: Include file/paths adjustments Boris Ostrovsky
2016-07-08 15:51 ` Jan Beulich
2016-07-05 19:05 ` [PATCH v1 14/20] acpi: Move ACPI code to tools/libacpi Boris Ostrovsky
2016-08-03 16:00 ` Jan Beulich
2016-07-05 19:05 ` [PATCH v1 15/20] x86: Add more checks verifying that PIT/PIC/IOAPIC are emulated Boris Ostrovsky
2016-08-03 16:04 ` Jan Beulich
2016-07-05 19:05 ` [PATCH v1 16/20] x86: Allow LAPIC-only emulation_flags for HVM guests Boris Ostrovsky
2016-08-03 16:11 ` Jan Beulich
2016-08-03 16:15 ` Andrew Cooper
2016-07-05 19:05 ` [PATCH v1 17/20] libacpi: Build DSDT for PVH guests Boris Ostrovsky
2016-07-05 19:05 ` [PATCH v1 18/20] libxl/acpi: Add ACPI e820 entry Boris Ostrovsky
2016-07-06 10:00 ` Julien Grall
2016-07-06 15:43 ` Boris Ostrovsky
2016-07-05 19:05 ` [PATCH v1 19/20] libxl/pvhv2: Include APIC page in MMIO hole for PVHv2 guests Boris Ostrovsky
2016-07-07 16:47 ` Wei Liu
2016-07-07 17:02 ` Boris Ostrovsky
2016-07-07 17:16 ` Wei Liu
2016-07-05 19:05 ` [PATCH v1 20/20] libxl/acpi: Build ACPI tables for HVMlite guests Boris Ostrovsky
2016-07-06 11:05 ` Julien Grall
2016-07-06 15:50 ` Boris Ostrovsky
2016-07-06 16:04 ` Julien Grall
2016-07-06 16:30 ` Boris Ostrovsky
2016-07-06 17:03 ` Julien Grall
2016-07-06 17:33 ` Boris Ostrovsky
2016-07-07 8:38 ` Jan Beulich
2016-07-07 15:08 ` Boris Ostrovsky
2016-07-07 15:12 ` Julien Grall
2016-07-07 15:24 ` Jan Beulich
2016-07-08 10:55 ` Wei Liu
2016-07-08 14:48 ` Boris Ostrovsky
2016-07-08 16:07 ` Wei Liu
2016-07-08 17:20 ` Boris Ostrovsky
2016-07-11 10:47 ` Wei Liu
2016-07-11 13:33 ` Boris Ostrovsky
2016-07-11 13:39 ` Julien Grall
2016-07-11 13:42 ` Wei Liu
2016-07-11 13:58 ` Julien Grall
2016-07-11 13:41 ` Wei Liu
2016-07-11 14:40 ` Boris Ostrovsky
2016-07-12 14:30 ` Wei Liu
2016-07-11 14:00 ` Anthony PERARD
2016-07-06 16:04 ` [PATCH v1 00/20] Make ACPI builder available to components other than hvmloader Roger Pau Monné
2016-07-06 16:32 ` Boris Ostrovsky
2016-07-07 8:35 ` Jan Beulich
2016-07-07 9:14 ` Julien Grall
2016-07-07 9:20 ` Jan Beulich
2016-07-07 9:29 ` Julien Grall
2016-07-07 15:04 ` Boris Ostrovsky
2016-07-07 15:10 ` Jan Beulich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1467745519-9868-4-git-send-email-boris.ostrovsky@oracle.com \
--to=boris.ostrovsky@oracle.com \
--cc=andrew.cooper3@citrix.com \
--cc=ian.jackson@eu.citrix.com \
--cc=jbeulich@suse.com \
--cc=julien.grall@arm.com \
--cc=roger.pau@citrix.com \
--cc=wei.liu2@citrix.com \
--cc=xen-devel@lists.xen.org \
--cc=zhaoshenglong@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).