From: Boris Ostrovsky <boris.ostrovsky@oracle.com>
To: xen-devel@lists.xen.org
Cc: wei.liu2@citrix.com, andrew.cooper3@citrix.com,
ian.jackson@eu.citrix.com, julien.grall@arm.com,
jbeulich@suse.com, zhaoshenglong@huawei.com,
boris.ostrovsky@oracle.com, roger.pau@citrix.com
Subject: [PATCH v1 08/20] acpi/hvmloader: Make providing IOAPIC in MADT optional
Date: Tue, 5 Jul 2016 15:05:07 -0400 [thread overview]
Message-ID: <1467745519-9868-9-git-send-email-boris.ostrovsky@oracle.com> (raw)
In-Reply-To: <1467745519-9868-1-git-send-email-boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
---
tools/firmware/hvmloader/acpi/build.c | 68 +++++++++++++++++--------------
tools/firmware/hvmloader/acpi/libacpi.h | 1 +
tools/firmware/hvmloader/util.c | 2 +-
3 files changed, 39 insertions(+), 32 deletions(-)
diff --git a/tools/firmware/hvmloader/acpi/build.c b/tools/firmware/hvmloader/acpi/build.c
index 94b46c1..8780984 100644
--- a/tools/firmware/hvmloader/acpi/build.c
+++ b/tools/firmware/hvmloader/acpi/build.c
@@ -81,43 +81,49 @@ static struct acpi_20_madt *construct_madt(struct acpi_config *config)
madt->lapic_addr = LAPIC_BASE_ADDRESS;
madt->flags = ACPI_PCAT_COMPAT;
- intsrcovr = (struct acpi_20_madt_intsrcovr *)(madt + 1);
- for ( i = 0; i < 16; i++ )
+ if ( config->table_flags & ACPI_BUILD_IOAPIC )
{
- memset(intsrcovr, 0, sizeof(*intsrcovr));
- intsrcovr->type = ACPI_INTERRUPT_SOURCE_OVERRIDE;
- intsrcovr->length = sizeof(*intsrcovr);
- intsrcovr->source = i;
-
- if ( i == 0 )
- {
- /* ISA IRQ0 routed to IOAPIC GSI 2. */
- intsrcovr->gsi = 2;
- intsrcovr->flags = 0x0;
- }
- else if ( PCI_ISA_IRQ_MASK & (1U << i) )
+ intsrcovr = (struct acpi_20_madt_intsrcovr *)(madt + 1);
+ for ( i = 0; i < 16; i++ )
{
- /* PCI: active-low level-triggered. */
- intsrcovr->gsi = i;
- intsrcovr->flags = 0xf;
- }
- else
- {
- /* No need for a INT source override structure. */
- continue;
+ memset(intsrcovr, 0, sizeof(*intsrcovr));
+ intsrcovr->type = ACPI_INTERRUPT_SOURCE_OVERRIDE;
+ intsrcovr->length = sizeof(*intsrcovr);
+ intsrcovr->source = i;
+
+ if ( i == 0 )
+ {
+ /* ISA IRQ0 routed to IOAPIC GSI 2. */
+ intsrcovr->gsi = 2;
+ intsrcovr->flags = 0x0;
+ }
+ else if ( PCI_ISA_IRQ_MASK & (1U << i) )
+ {
+ /* PCI: active-low level-triggered. */
+ intsrcovr->gsi = i;
+ intsrcovr->flags = 0xf;
+ }
+ else
+ {
+ /* No need for a INT source override structure. */
+ continue;
+ }
+
+ intsrcovr++;
}
- intsrcovr++;
- }
+ io_apic = (struct acpi_20_madt_ioapic *)intsrcovr;
+ memset(io_apic, 0, sizeof(*io_apic));
+ io_apic->type = ACPI_IO_APIC;
+ io_apic->length = sizeof(*io_apic);
+ io_apic->ioapic_id = IOAPIC_ID;
+ io_apic->ioapic_addr = IOAPIC_BASE_ADDRESS;
- io_apic = (struct acpi_20_madt_ioapic *)intsrcovr;
- memset(io_apic, 0, sizeof(*io_apic));
- io_apic->type = ACPI_IO_APIC;
- io_apic->length = sizeof(*io_apic);
- io_apic->ioapic_id = IOAPIC_ID;
- io_apic->ioapic_addr = IOAPIC_BASE_ADDRESS;
+ lapic = (struct acpi_20_madt_lapic *)(io_apic + 1);
+ }
+ else
+ lapic = (struct acpi_20_madt_lapic *)(madt + 1);
- lapic = (struct acpi_20_madt_lapic *)(io_apic + 1);
config->ainfo.nr_cpus =config-> hvminfo->nr_vcpus;
config->ainfo.madt_lapic0_addr = (uint32_t)lapic;
for ( i = 0; i < config->hvminfo->nr_vcpus; i++ )
diff --git a/tools/firmware/hvmloader/acpi/libacpi.h b/tools/firmware/hvmloader/acpi/libacpi.h
index 75874ec..86f19b9 100644
--- a/tools/firmware/hvmloader/acpi/libacpi.h
+++ b/tools/firmware/hvmloader/acpi/libacpi.h
@@ -35,6 +35,7 @@
#define ACPI_BUILD_SSDT_S3 (1<<1)
#define ACPI_BUILD_SSDT_S4 (1<<2)
#define ACPI_BUILD_TCPA (1<<3)
+#define ACPI_BUILD_IOAPIC (1<<4)
#pragma pack ()
diff --git a/tools/firmware/hvmloader/util.c b/tools/firmware/hvmloader/util.c
index 9f9c93b..5aecf7b 100644
--- a/tools/firmware/hvmloader/util.c
+++ b/tools/firmware/hvmloader/util.c
@@ -914,7 +914,7 @@ void hvmloader_acpi_build_tables(struct acpi_config *config,
if ( !strncmp(xenstore_read("platform/acpi_s4", "1"), "1", 1) )
config->table_flags |= ACPI_BUILD_SSDT_S4;
- config->table_flags |= ACPI_BUILD_TCPA;
+ config->table_flags |= (ACPI_BUILD_TCPA | ACPI_BUILD_IOAPIC);
config->tis_hdr = (uint16_t *)ACPI_TIS_HDR_ADDRESS;
--
1.7.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
next prev parent reply other threads:[~2016-07-05 19:05 UTC|newest]
Thread overview: 104+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-05 19:04 [PATCH v1 00/20] Make ACPI builder available to components other than hvmloader Boris Ostrovsky
2016-07-05 19:05 ` [PATCH v1 01/20] hvmloader: Provide hvmloader_acpi_build_tables() Boris Ostrovsky
2016-07-06 14:47 ` Konrad Rzeszutek Wilk
2016-07-08 9:52 ` Jan Beulich
2016-07-05 19:05 ` [PATCH v1 02/20] acpi/hvmloader: Move acpi_info initialization out of ACPI code Boris Ostrovsky
2016-07-07 16:58 ` Ian Jackson
2016-07-07 17:09 ` Boris Ostrovsky
2016-07-07 17:15 ` Wei Liu
2016-07-07 17:45 ` Boris Ostrovsky
2016-07-08 15:06 ` Konrad Rzeszutek Wilk
2016-07-08 15:50 ` Ian Jackson
2016-07-08 15:57 ` Boris Ostrovsky
2016-07-08 16:21 ` Ian Jackson
2016-07-11 12:10 ` Wei Liu
2016-07-11 14:47 ` Lars Kurth
2016-07-11 14:54 ` Konrad Rzeszutek Wilk
2016-07-11 15:06 ` Boris Ostrovsky
2016-07-11 15:38 ` Ian Jackson
2016-07-11 15:47 ` Ian Jackson
2016-07-11 16:07 ` Boris Ostrovsky
2016-07-08 10:10 ` Jan Beulich
2016-07-08 14:39 ` Boris Ostrovsky
2016-07-08 15:11 ` Jan Beulich
2016-07-08 16:14 ` Boris Ostrovsky
2016-08-01 10:09 ` Jan Beulich
2016-08-01 14:06 ` Boris Ostrovsky
2016-08-01 14:18 ` Jan Beulich
2016-07-05 19:05 ` [PATCH v1 03/20] acpi/hvmloader: Initialize vm_gid data outside " Boris Ostrovsky
2016-07-08 10:18 ` Jan Beulich
2016-07-05 19:05 ` [PATCH v1 04/20] acpi/hvmloader: Decide which SSDTs to install in hvmloader Boris Ostrovsky
2016-07-08 10:27 ` Jan Beulich
2016-07-05 19:05 ` [PATCH v1 05/20] acpi/hvmloader: Move passthrough initialization from ACPI code Boris Ostrovsky
2016-07-08 10:46 ` Jan Beulich
2016-07-05 19:05 ` [PATCH v1 06/20] acpi/hvmloader: Collect processor and NUMA info in hvmloader Boris Ostrovsky
2016-07-08 13:36 ` Jan Beulich
2016-07-08 15:08 ` Boris Ostrovsky
2016-07-08 15:14 ` Jan Beulich
2016-07-05 19:05 ` [PATCH v1 07/20] acpi/hvmloader: Set TIS header address " Boris Ostrovsky
2016-07-08 13:38 ` Jan Beulich
2016-07-05 19:05 ` Boris Ostrovsky [this message]
2016-07-08 13:41 ` [PATCH v1 08/20] acpi/hvmloader: Make providing IOAPIC in MADT optional Jan Beulich
2016-07-05 19:05 ` [PATCH v1 09/20] acpi/hvmloader: Build WAET optionally Boris Ostrovsky
2016-07-08 13:42 ` Jan Beulich
2016-07-05 19:05 ` [PATCH v1 10/20] acpi/hvmloader: Replace mem_alloc() and virt_to_phys() with memory ops Boris Ostrovsky
2016-07-08 13:58 ` Jan Beulich
2016-07-08 15:23 ` Boris Ostrovsky
2016-07-08 15:35 ` Jan Beulich
2016-07-08 16:19 ` Boris Ostrovsky
2016-07-19 9:11 ` Jan Beulich
2016-07-19 14:08 ` Boris Ostrovsky
2016-07-05 19:05 ` [PATCH v1 11/20] acpi/hvmloader: Translate all addresses when assigning addresses in ACPI tables Boris Ostrovsky
2016-07-08 14:31 ` Jan Beulich
2016-07-05 19:05 ` [PATCH v1 12/20] acpi/hvmloader: Link ACPI object files directly Boris Ostrovsky
2016-07-08 14:51 ` Jan Beulich
2016-07-08 15:41 ` Boris Ostrovsky
2016-07-05 19:05 ` [PATCH v1 13/20] acpi/hvmloader: Include file/paths adjustments Boris Ostrovsky
2016-07-08 15:51 ` Jan Beulich
2016-07-05 19:05 ` [PATCH v1 14/20] acpi: Move ACPI code to tools/libacpi Boris Ostrovsky
2016-08-03 16:00 ` Jan Beulich
2016-07-05 19:05 ` [PATCH v1 15/20] x86: Add more checks verifying that PIT/PIC/IOAPIC are emulated Boris Ostrovsky
2016-08-03 16:04 ` Jan Beulich
2016-07-05 19:05 ` [PATCH v1 16/20] x86: Allow LAPIC-only emulation_flags for HVM guests Boris Ostrovsky
2016-08-03 16:11 ` Jan Beulich
2016-08-03 16:15 ` Andrew Cooper
2016-07-05 19:05 ` [PATCH v1 17/20] libacpi: Build DSDT for PVH guests Boris Ostrovsky
2016-07-05 19:05 ` [PATCH v1 18/20] libxl/acpi: Add ACPI e820 entry Boris Ostrovsky
2016-07-06 10:00 ` Julien Grall
2016-07-06 15:43 ` Boris Ostrovsky
2016-07-05 19:05 ` [PATCH v1 19/20] libxl/pvhv2: Include APIC page in MMIO hole for PVHv2 guests Boris Ostrovsky
2016-07-07 16:47 ` Wei Liu
2016-07-07 17:02 ` Boris Ostrovsky
2016-07-07 17:16 ` Wei Liu
2016-07-05 19:05 ` [PATCH v1 20/20] libxl/acpi: Build ACPI tables for HVMlite guests Boris Ostrovsky
2016-07-06 11:05 ` Julien Grall
2016-07-06 15:50 ` Boris Ostrovsky
2016-07-06 16:04 ` Julien Grall
2016-07-06 16:30 ` Boris Ostrovsky
2016-07-06 17:03 ` Julien Grall
2016-07-06 17:33 ` Boris Ostrovsky
2016-07-07 8:38 ` Jan Beulich
2016-07-07 15:08 ` Boris Ostrovsky
2016-07-07 15:12 ` Julien Grall
2016-07-07 15:24 ` Jan Beulich
2016-07-08 10:55 ` Wei Liu
2016-07-08 14:48 ` Boris Ostrovsky
2016-07-08 16:07 ` Wei Liu
2016-07-08 17:20 ` Boris Ostrovsky
2016-07-11 10:47 ` Wei Liu
2016-07-11 13:33 ` Boris Ostrovsky
2016-07-11 13:39 ` Julien Grall
2016-07-11 13:42 ` Wei Liu
2016-07-11 13:58 ` Julien Grall
2016-07-11 13:41 ` Wei Liu
2016-07-11 14:40 ` Boris Ostrovsky
2016-07-12 14:30 ` Wei Liu
2016-07-11 14:00 ` Anthony PERARD
2016-07-06 16:04 ` [PATCH v1 00/20] Make ACPI builder available to components other than hvmloader Roger Pau Monné
2016-07-06 16:32 ` Boris Ostrovsky
2016-07-07 8:35 ` Jan Beulich
2016-07-07 9:14 ` Julien Grall
2016-07-07 9:20 ` Jan Beulich
2016-07-07 9:29 ` Julien Grall
2016-07-07 15:04 ` Boris Ostrovsky
2016-07-07 15:10 ` Jan Beulich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1467745519-9868-9-git-send-email-boris.ostrovsky@oracle.com \
--to=boris.ostrovsky@oracle.com \
--cc=andrew.cooper3@citrix.com \
--cc=ian.jackson@eu.citrix.com \
--cc=jbeulich@suse.com \
--cc=julien.grall@arm.com \
--cc=roger.pau@citrix.com \
--cc=wei.liu2@citrix.com \
--cc=xen-devel@lists.xen.org \
--cc=zhaoshenglong@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).