From: Wei Liu <wei.liu2@citrix.com>
To: Xen-devel <xen-devel@lists.xenproject.org>
Cc: ian.jackson@eu.citrix.com, Wei Liu <wei.liu2@citrix.com>,
andrew.cooper3@citrix.com
Subject: [OSSTEST PATCH RFC 00/14] Integrate XTF into OSSTest
Date: Thu, 4 Aug 2016 09:45:46 +0100 [thread overview]
Message-ID: <1470300360-4435-1-git-send-email-wei.liu2@citrix.com> (raw)
Hi all
This patch series integrates XTF into OSSTest. It still depends on
quite a few things (listed below) but I think it has gotten to point
that it can be posted for review.
It depends on having a canonical location for xtf.git. Currently this
series contains a patch to point to my own xtf.git tree.
It depends on Ian's work:
1. Add a "skip" state to OSSTest.
2. Add diverse flag.
To make the XTf jobs reliable, we also need to:
1. Fix synchronisation issues in xenconsole related code in Xen.
2. Fix synchronisation issue in xtf-runner.
The effect of synchronisations can be seen in [0]. Test 1 and 5
failed. I've posted patches for them ([2], [3]).
I created a dummy test case that always fails. We expect ts-xtf-run to
continue running after that. The result is at [1].
Wei.
[0] http://osstest.xs.citrite.net/~osstest/testlogs/logs/66910/
[1] http://osstest.xs.citrite.net/~osstest/testlogs/logs/66916/
[2] <1470057385-31599-1-git-send-email-wei.liu2@citrix.com>
[3] <1470060258-20084-1-git-send-email-wei.liu2@citrix.com>
* Currently all logs are only accessible from within Citrix. Sorry. :-/
Wei Liu (14):
ts-xen-build: always compile in FEP support
TestSupport: factor out target_jobdir_subdir
DO NOT APPLY ts-leak-check: sleep 5 seconds before collecting stuff
ap-common: add xtf tree
DO NOT APPLY point xtf to my personal tree
Introduce ts-xtf-build
sg-run-job: create xtf build recipe
Introduce ts-xtf-install
mfi-common: create xtf build job for 4.8 onwards
Introduce ts-xtf-fep
Introduce ts-xtf-run
sg-run-job: test-xtf recipe
make-flight: create 5 xtf jobs
Create XTF branch
Osstest/TestSupport.pm | 12 +++--
ap-common | 4 ++
ap-fetch-version | 4 ++
ap-print-url | 3 ++
ap-push | 5 ++
cr-daily-branch | 8 +++
cr-for-branches | 2 +-
cri-common | 1 +
make-flight | 40 ++++++++++++++
mfi-common | 29 +++++++++++
sg-run-job | 12 +++++
ts-leak-check | 3 ++
ts-xen-build | 7 ++-
ts-xtf-build | 66 +++++++++++++++++++++++
ts-xtf-fep | 39 ++++++++++++++
ts-xtf-install | 41 +++++++++++++++
ts-xtf-run | 139 +++++++++++++++++++++++++++++++++++++++++++++++++
17 files changed, 410 insertions(+), 5 deletions(-)
create mode 100755 ts-xtf-build
create mode 100755 ts-xtf-fep
create mode 100755 ts-xtf-install
create mode 100755 ts-xtf-run
--
2.1.4
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
next reply other threads:[~2016-08-04 8:46 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-04 8:45 Wei Liu [this message]
2016-08-04 8:45 ` [OSSTEST PATCH RFC 01/14] ts-xen-build: always compile in FEP support Wei Liu
2016-08-04 11:46 ` Ian Jackson
2016-08-04 11:49 ` Wei Liu
2016-08-04 11:53 ` Andrew Cooper
2016-08-04 12:03 ` Wei Liu
2016-08-04 13:28 ` Andrew Cooper
2016-08-04 14:03 ` Wei Liu
2016-08-04 14:08 ` Andrew Cooper
2016-08-04 15:22 ` Ian Jackson
2016-08-04 15:26 ` Wei Liu
2016-08-04 15:36 ` Ian Jackson
2016-08-04 8:45 ` [OSSTEST PATCH RFC 02/14] TestSupport: factor out target_jobdir_subdir Wei Liu
2016-08-04 11:47 ` Ian Jackson
2016-08-04 8:45 ` [OSSTEST PATCH RFC 03/14] DO NOT APPLY ts-leak-check: sleep 5 seconds before collecting stuff Wei Liu
2016-08-04 8:45 ` [OSSTEST PATCH RFC 04/14] ap-common: add xtf tree Wei Liu
2016-08-04 11:49 ` Ian Jackson
2016-08-04 13:34 ` Andrew Cooper
2016-08-04 15:21 ` Ian Jackson
2016-08-04 15:43 ` Andrew Cooper
2016-08-04 16:13 ` Ian Jackson
2016-08-04 18:20 ` Andrew Cooper
2016-08-04 14:06 ` Wei Liu
2016-08-04 8:45 ` [OSSTEST PATCH RFC 05/14] DO NOT APPLY point xtf to my personal tree Wei Liu
2016-08-04 8:45 ` [OSSTEST PATCH RFC 06/14] Introduce ts-xtf-build Wei Liu
2016-08-04 11:52 ` Ian Jackson
2016-08-04 11:57 ` Wei Liu
2016-08-04 15:04 ` Ian Jackson
2016-08-04 15:17 ` [OSSTEST PATCH RFC 06/14] Introduce ts-xtf-build [and 1 more messages] Ian Jackson
2016-08-04 15:35 ` Wei Liu
2016-08-04 16:05 ` Ian Jackson
2016-08-04 18:10 ` Andrew Cooper
2016-08-04 18:12 ` Ian Jackson
2016-08-04 8:45 ` [OSSTEST PATCH RFC 07/14] sg-run-job: create xtf build recipe Wei Liu
2016-08-04 11:53 ` Ian Jackson
2016-08-04 8:45 ` [OSSTEST PATCH RFC 08/14] Introduce ts-xtf-install Wei Liu
2016-08-04 11:54 ` Ian Jackson
2016-08-04 11:58 ` Wei Liu
2016-08-04 8:45 ` [OSSTEST PATCH RFC 09/14] mfi-common: create xtf build job for 4.8 onwards Wei Liu
2016-08-04 11:59 ` Ian Jackson
2016-08-04 14:12 ` Wei Liu
2016-08-04 8:45 ` [OSSTEST PATCH RFC 10/14] Introduce ts-xtf-fep Wei Liu
2016-08-04 12:00 ` Ian Jackson
2016-08-04 12:03 ` Wei Liu
2016-08-04 8:45 ` [OSSTEST PATCH RFC 11/14] Introduce ts-xtf-run Wei Liu
2016-08-04 12:19 ` Ian Jackson
2016-08-04 14:40 ` Wei Liu
2016-08-04 15:31 ` Ian Jackson
2016-08-04 8:45 ` [OSSTEST PATCH RFC 12/14] sg-run-job: test-xtf recipe Wei Liu
2016-08-04 12:20 ` Ian Jackson
2016-08-04 8:45 ` [OSSTEST PATCH RFC 13/14] make-flight: create 5 xtf jobs Wei Liu
2016-08-04 12:24 ` Ian Jackson
2016-08-04 8:46 ` [OSSTEST PATCH RFC 14/14] Create XTF branch Wei Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1470300360-4435-1-git-send-email-wei.liu2@citrix.com \
--to=wei.liu2@citrix.com \
--cc=andrew.cooper3@citrix.com \
--cc=ian.jackson@eu.citrix.com \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).