From: Boris Ostrovsky <boris.ostrovsky@oracle.com>
To: xen-devel@lists.xen.org
Cc: wei.liu2@citrix.com, andrew.cooper3@citrix.com,
ian.jackson@eu.citrix.com, julien.grall@arm.com,
jbeulich@suse.com, zhaoshenglong@huawei.com,
boris.ostrovsky@oracle.com, roger.pau@citrix.com
Subject: [PATCH v3 16/19] libxl/pvhv2: Include APIC page in MMIO hole for PVHv2 guests
Date: Wed, 7 Sep 2016 14:59:26 -0400 [thread overview]
Message-ID: <1473274769-19129-17-git-send-email-boris.ostrovsky@oracle.com> (raw)
In-Reply-To: <1473274769-19129-1-git-send-email-boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
---
Changes in v3:
* Now that we don't have x86.h define LAPIC_BASE_ADDRESS in libxl_arch.h
tools/libxl/Makefile | 2 ++
tools/libxl/libxl_arch.h | 6 ++++++
tools/libxl/libxl_dom.c | 19 +++++++++++++++----
3 files changed, 23 insertions(+), 4 deletions(-)
diff --git a/tools/libxl/Makefile b/tools/libxl/Makefile
index 14a1a8e..1f3b40f 100644
--- a/tools/libxl/Makefile
+++ b/tools/libxl/Makefile
@@ -166,6 +166,8 @@ $(XL_OBJS) $(TEST_PROG_OBJS) _libxl.api-for-check: \
$(XL_OBJS): CFLAGS += $(CFLAGS_XL)
$(XL_OBJS): CFLAGS += -include $(XEN_ROOT)/tools/config.h # libxl_json.h needs it.
+libxl_dom.o: CFLAGS += -I$(XEN_ROOT)/tools # include libacpi/x86.h
+
SAVE_HELPER_OBJS = libxl_save_helper.o _libxl_save_msgs_helper.o
$(SAVE_HELPER_OBJS): CFLAGS += $(CFLAGS_libxenctrl) $(CFLAGS_libxenevtchn)
diff --git a/tools/libxl/libxl_arch.h b/tools/libxl/libxl_arch.h
index 34a853c..253a037 100644
--- a/tools/libxl/libxl_arch.h
+++ b/tools/libxl/libxl_arch.h
@@ -62,4 +62,10 @@ int libxl__arch_domain_construct_memmap(libxl__gc *gc,
uint32_t domid,
struct xc_dom_image *dom);
+#if defined(__i386__) || defined(__x86_64__)
+
+#define LAPIC_BASE_ADDRESS 0xfee00000
+
+#endif
+
#endif
diff --git a/tools/libxl/libxl_dom.c b/tools/libxl/libxl_dom.c
index 7974302..2924629 100644
--- a/tools/libxl/libxl_dom.c
+++ b/tools/libxl/libxl_dom.c
@@ -1077,10 +1077,21 @@ int libxl__build_hvm(libxl__gc *gc, uint32_t domid,
dom->target_pages = mem_size >> XC_PAGE_SHIFT;
if (dom->mmio_size == 0 && device_model)
dom->mmio_size = HVM_BELOW_4G_MMIO_LENGTH;
- else if (dom->mmio_size == 0 && !device_model)
- dom->mmio_size = GB(4) -
- ((X86_HVM_END_SPECIAL_REGION - X86_HVM_NR_SPECIAL_PAGES)
- << XC_PAGE_SHIFT);
+ else if (dom->mmio_size == 0 && !device_model) {
+#if defined(__i386__) || defined(__x86_64__)
+ if (libxl_defbool_val(info->u.hvm.apic)) {
+ /* Make sure LAPIC_BASE_ADDRESS is below special pages */
+ assert(((((X86_HVM_END_SPECIAL_REGION - X86_HVM_NR_SPECIAL_PAGES)
+ << XC_PAGE_SHIFT) - LAPIC_BASE_ADDRESS)) >= XC_PAGE_SIZE);
+ dom->mmio_size = GB(4) - LAPIC_BASE_ADDRESS;
+ } else
+ dom->mmio_size = GB(4) -
+ ((X86_HVM_END_SPECIAL_REGION - X86_HVM_NR_SPECIAL_PAGES)
+ << XC_PAGE_SHIFT);
+#else
+ assert(1);
+#endif
+ }
lowmem_end = mem_size;
highmem_end = 0;
mmio_start = (1ull << 32) - dom->mmio_size;
--
1.8.3.1
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
next prev parent reply other threads:[~2016-09-07 18:59 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-07 18:59 [PATCH v3 00/19] Make ACPI builder available to components other than hvmloader Boris Ostrovsky
2016-09-07 18:59 ` [PATCH v3 01/19] acpi: Re-license ACPI builder files from GPLv2 to LGPLv2.1 Boris Ostrovsky
2016-09-07 19:48 ` Boris Ostrovsky
2016-09-07 18:59 ` [PATCH v3 02/19] acpi/hvmloader: Collect processor and NUMA info in hvmloader Boris Ostrovsky
2016-09-08 13:41 ` Jan Beulich
2016-09-07 18:59 ` [PATCH v3 03/19] acpi/hvmloader: Set TIS header address " Boris Ostrovsky
2016-09-07 18:59 ` [PATCH v3 04/19] acpi/hvmloader: Make providing IOAPIC in MADT optional Boris Ostrovsky
2016-09-07 18:59 ` [PATCH v3 05/19] acpi/hvmloader: Build WAET optionally Boris Ostrovsky
2016-09-07 18:59 ` [PATCH v3 06/19] acpi/hvmloader: Replace mem_alloc() and virt_to_phys() with memory ops Boris Ostrovsky
2016-09-08 13:54 ` Jan Beulich
2016-09-07 18:59 ` [PATCH v3 07/19] acpi/hvmloader: Translate all addresses when assigning addresses in ACPI tables Boris Ostrovsky
2016-09-07 18:59 ` [PATCH v3 08/19] acpi/hvmloader: Link ACPI object files directly Boris Ostrovsky
2016-09-08 13:56 ` Jan Beulich
2016-09-07 18:59 ` [PATCH v3 09/19] acpi/hvmloader: Include file/paths adjustments Boris Ostrovsky
2016-09-08 14:05 ` Jan Beulich
2016-09-08 18:29 ` Boris Ostrovsky
2016-09-07 18:59 ` [PATCH v3 10/19] acpi: Move ACPI code to tools/libacpi Boris Ostrovsky
2016-09-07 18:59 ` [PATCH v3 11/19] x86: Allow LAPIC-only emulation_flags for HVM guests Boris Ostrovsky
2016-09-07 18:59 ` [PATCH v3 12/19] libacpi: Build DSDT for PVH guests Boris Ostrovsky
2016-09-08 14:09 ` Jan Beulich
2016-09-14 4:13 ` Shannon Zhao
2016-09-14 12:47 ` Boris Ostrovsky
2016-09-07 18:59 ` [PATCH v3 13/19] acpi: Makefile should better tolerate interrupts Boris Ostrovsky
2016-09-08 14:15 ` Jan Beulich
2016-09-08 18:51 ` Boris Ostrovsky
2016-09-09 8:03 ` Jan Beulich
2016-09-09 13:07 ` Boris Ostrovsky
2016-09-09 13:29 ` Jan Beulich
2016-09-09 13:56 ` Boris Ostrovsky
2016-09-09 14:13 ` Ian Jackson
2016-09-09 14:31 ` Boris Ostrovsky
2016-09-09 14:33 ` Ian Jackson
2016-09-09 14:38 ` Boris Ostrovsky
2016-09-09 15:20 ` Jan Beulich
2016-09-09 16:05 ` Boris Ostrovsky
2016-09-09 16:11 ` Jan Beulich
2016-09-07 18:59 ` [PATCH v3 14/19] libxc/libxl: Allow multiple ACPI modules Boris Ostrovsky
2016-09-15 10:13 ` Wei Liu
2016-09-07 18:59 ` [PATCH v3 15/19] libxl/acpi: Add ACPI e820 entry Boris Ostrovsky
2016-09-15 10:13 ` Wei Liu
2016-09-07 18:59 ` Boris Ostrovsky [this message]
2016-09-15 10:13 ` [PATCH v3 16/19] libxl/pvhv2: Include APIC page in MMIO hole for PVHv2 guests Wei Liu
2016-09-07 18:59 ` [PATCH v3 17/19] ilibxl: Initialize domain build info before calling libxl__domain_make Boris Ostrovsky
2016-09-15 10:13 ` Wei Liu
2016-09-07 18:59 ` [PATCH v3 18/19] libxl/acpi: Build ACPI tables for HVMlite guests Boris Ostrovsky
2016-09-08 14:20 ` Jan Beulich
2016-09-08 18:53 ` Boris Ostrovsky
2016-09-09 8:05 ` Jan Beulich
2016-09-09 13:11 ` Boris Ostrovsky
2016-09-09 13:50 ` Ian Jackson
2016-09-09 14:02 ` Boris Ostrovsky
2016-09-07 18:59 ` [PATCH v3 19/19] libxc/xc_dom_core: Copy ACPI tables to guest space Boris Ostrovsky
2016-09-15 10:13 ` Wei Liu
2016-09-14 15:21 ` [PATCH v3 00/19] Make ACPI builder available to components other than hvmloader Boris Ostrovsky
2016-09-15 10:18 ` Wei Liu
2016-09-15 10:20 ` Julien Grall
2016-09-15 10:22 ` Wei Liu
2016-09-15 12:39 ` Boris Ostrovsky
2016-09-15 13:48 ` Julien Grall
2016-09-15 14:07 ` Boris Ostrovsky
2016-09-15 14:21 ` Jan Beulich
2016-09-15 15:28 ` Boris Ostrovsky
2016-09-15 16:05 ` Jan Beulich
2016-09-15 16:40 ` Boris Ostrovsky
2016-09-16 6:45 ` Jan Beulich
2016-09-16 12:41 ` Boris Ostrovsky
2016-09-16 15:22 ` Lars Kurth
2016-09-16 15:53 ` Boris Ostrovsky
2016-09-19 15:30 ` Ian Jackson
2016-09-19 15:42 ` Boris Ostrovsky
2016-09-19 15:49 ` Ian Jackson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1473274769-19129-17-git-send-email-boris.ostrovsky@oracle.com \
--to=boris.ostrovsky@oracle.com \
--cc=andrew.cooper3@citrix.com \
--cc=ian.jackson@eu.citrix.com \
--cc=jbeulich@suse.com \
--cc=julien.grall@arm.com \
--cc=roger.pau@citrix.com \
--cc=wei.liu2@citrix.com \
--cc=xen-devel@lists.xen.org \
--cc=zhaoshenglong@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).