From: Andrew Cooper <andrew.cooper3@citrix.com>
To: Xen-devel <xen-devel@lists.xen.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>,
Jan Beulich <JBeulich@suse.com>
Subject: [PATCH 4/6] x86/xstate: Fix latent bugs in expand_xsave_states()
Date: Mon, 12 Sep 2016 10:51:38 +0100 [thread overview]
Message-ID: <1473673900-8585-5-git-send-email-andrew.cooper3@citrix.com> (raw)
In-Reply-To: <1473673900-8585-1-git-send-email-andrew.cooper3@citrix.com>
Without checking the size input, the memcpy() for the uncompressed path might
read off the end of the vcpu's xsave_area. Both callers pass the approprite
size, so hold them to it with a BUG_ON().
The compressed path is currently dead code, but its attempt to avoid leaking
uninitalised data was incomplete. The current xstate_bv will be less than
xcr0_accum if some bits of xsave state are in their default values. Work
around this by zeroing the whole rest of the buffer before decompression.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
---
CC: Jan Beulich <JBeulich@suse.com>
---
xen/arch/x86/xstate.c | 21 ++++++++++++++++++---
1 file changed, 18 insertions(+), 3 deletions(-)
diff --git a/xen/arch/x86/xstate.c b/xen/arch/x86/xstate.c
index 6e4a0d3..1973ba0 100644
--- a/xen/arch/x86/xstate.c
+++ b/xen/arch/x86/xstate.c
@@ -169,6 +169,17 @@ static void *get_xsave_addr(struct xsave_struct *xsave,
(void *)xsave + comp_offsets[xfeature_idx] : NULL;
}
+/*
+ * Serialise a vcpus xsave state into a representation suitable for the
+ * toolstack.
+ *
+ * Internally a vcpus xsave state may be compressed or uncompressed, depending
+ * on the features in use, but the ABI with the toolstack is strictly
+ * uncompressed.
+ *
+ * It is the callers responsibility to ensure that there is xsave state to
+ * serialise, and that the provided buffer is exactly the right size.
+ */
void expand_xsave_states(struct vcpu *v, void *dest, unsigned int size)
{
struct xsave_struct *xsave = v->arch.xsave_area;
@@ -176,6 +187,11 @@ void expand_xsave_states(struct vcpu *v, void *dest, unsigned int size)
u64 xstate_bv = xsave->xsave_hdr.xstate_bv;
u64 valid;
+ /* Check there is state to serialise (i.e. at least an XSAVE_HDR) */
+ BUG_ON(!v->arch.xcr0_accum);
+ /* Check there is the correct room to decompress into. */
+ BUG_ON(size != xstate_ctxt_size(v->arch.xcr0_accum));
+
if ( !(xsave->xsave_hdr.xcomp_bv & XSTATE_COMPACTION_ENABLED) )
{
memcpy(dest, xsave, size);
@@ -189,6 +205,7 @@ void expand_xsave_states(struct vcpu *v, void *dest, unsigned int size)
* Copy legacy XSAVE area and XSAVE hdr area.
*/
memcpy(dest, xsave, XSTATE_AREA_MIN_SIZE);
+ memset(dest + XSTATE_AREA_MIN_SIZE, 0, size - XSTATE_AREA_MIN_SIZE);
((struct xsave_struct *)dest)->xsave_hdr.xcomp_bv = 0;
@@ -205,11 +222,9 @@ void expand_xsave_states(struct vcpu *v, void *dest, unsigned int size)
if ( src )
{
- ASSERT((xstate_offsets[index] + xstate_sizes[index]) <= size);
+ BUG_ON((xstate_offsets[index] + xstate_sizes[index]) <= size);
memcpy(dest + xstate_offsets[index], src, xstate_sizes[index]);
}
- else
- memset(dest + xstate_offsets[index], 0, xstate_sizes[index]);
valid &= ~feature;
}
--
2.1.4
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
next prev parent reply other threads:[~2016-09-12 9:51 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-12 9:51 [PATCH 0/6] Fix multiple issues with xsave state handling on migrate Andrew Cooper
2016-09-12 9:51 ` [PATCH 1/6] x86/domctl: Introduce PV_XSAVE_HDR_SIZE and remove its opencoding Andrew Cooper
2016-09-12 11:05 ` Jan Beulich
2016-09-12 9:51 ` [PATCH 2/6] x86/domctl: Fix TOCTOU race with the use of XEN_DOMCTL_getvcpuextstate Andrew Cooper
2016-09-12 11:17 ` Jan Beulich
2016-09-12 12:02 ` Andrew Cooper
2016-09-12 12:33 ` Jan Beulich
2016-09-12 13:09 ` Andrew Cooper
2016-09-12 13:35 ` Jan Beulich
2016-09-12 13:37 ` Jan Beulich
2016-09-12 9:51 ` [PATCH 3/6] x86/domctl: Simplfy XEN_DOMCTL_getvcpuextstate when xsave is not in use Andrew Cooper
2016-09-12 11:26 ` Jan Beulich
2016-09-12 9:51 ` Andrew Cooper [this message]
2016-09-12 11:41 ` [PATCH 4/6] x86/xstate: Fix latent bugs in expand_xsave_states() Jan Beulich
2016-09-12 12:29 ` Andrew Cooper
2016-09-12 12:41 ` Jan Beulich
2016-09-12 12:43 ` Jan Beulich
2016-09-12 13:57 ` Andrew Cooper
2016-09-12 14:13 ` Jan Beulich
2016-09-12 9:51 ` [PATCH 5/6] x86/domctl: Fix migration of guests which are not using xsave Andrew Cooper
2016-09-12 12:14 ` Jan Beulich
2016-09-12 12:46 ` Andrew Cooper
2016-09-12 13:41 ` Jan Beulich
2016-09-12 9:51 ` [PATCH 6/6] x86/xstate: Fix latent bugs in compress_xsave_states() Andrew Cooper
2016-09-12 12:27 ` Jan Beulich
2016-09-12 12:59 ` Andrew Cooper
2016-09-12 13:47 ` Jan Beulich
2016-09-12 15:28 ` Andrew Cooper
2016-09-12 16:10 ` Jan Beulich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1473673900-8585-5-git-send-email-andrew.cooper3@citrix.com \
--to=andrew.cooper3@citrix.com \
--cc=JBeulich@suse.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).