From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: xen-devel@lists.xenproject.org, konrad@kernel.org,
ross.lagerwall@citrix.com, julien.grall@arm.com,
sstabellini@kernel.org
Cc: Andrew Cooper <andrew.cooper3@citrix.com>,
Jan Beulich <jbeulich@suse.com>,
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Subject: [PATCH v4 15/16] livepatch: arm[32, 64], x86: NOP test-case
Date: Fri, 16 Sep 2016 12:38:27 -0400 [thread overview]
Message-ID: <1474043908-12101-16-git-send-email-konrad.wilk@oracle.com> (raw)
In-Reply-To: <1474043908-12101-1-git-send-email-konrad.wilk@oracle.com>
The test-case is quite simple - we NOP the 'xen_minor_version'.
The amount of NOPs depends on the architecture.
On x86 the function is 11 bytes long:
55 push %rbp <- NOP
48 89 e5 mov %rsp,%rbp <- NOP
b8 04 00 00 00 mov $0x4,%eax <- NOP
5d pop %rbp <- NOP
c3 retq
We can NOP everything but the last instruction (so 10 bytes).
On ARM64 its 8 bytes:
52800100 mov w0, #0x8 <- NOP
d65f03c0 ret
We can NOP the first instruction.
While on ARM32 there are 24 bytes:
e52db004 push {fp}
e28db000 add fp, sp, #0 <- NOP
e3a00008 mov r0, #8 <- NOP
e24bd000 sub sp, fp, #0 <- NOP
e49db004 pop {fp}
e12fff1e bx lr
And we can NOP instruction 2,3, and 4.
Granted this code may be different per compiler!
Hence if anybody does run this test-case - they should
verify that the assumptions made here are correct.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
Cc: Julien Grall <julien.grall@arm.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
v3: New submission.
---
xen/test/livepatch/Makefile | 15 +++++++++++++-
xen/test/livepatch/xen_nop.c | 49 ++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 63 insertions(+), 1 deletion(-)
create mode 100644 xen/test/livepatch/xen_nop.c
diff --git a/xen/test/livepatch/Makefile b/xen/test/livepatch/Makefile
index 4d66a40..d7a4735 100644
--- a/xen/test/livepatch/Makefile
+++ b/xen/test/livepatch/Makefile
@@ -18,6 +18,7 @@ CODE_SZ=$(shell nm --defined -S $(1) | grep $(2) | awk '{ print "0x"$$2}')
LIVEPATCH := xen_hello_world.livepatch
LIVEPATCH_BYE := xen_bye_world.livepatch
LIVEPATCH_REPLACE := xen_replace_world.livepatch
+LIVEPATCH_NOP := xen_nop.livepatch
default: livepatch
@@ -25,10 +26,12 @@ install: livepatch
$(INSTALL_DATA) $(LIVEPATCH) $(DESTDIR)$(DEBUG_DIR)/$(LIVEPATCH)
$(INSTALL_DATA) $(LIVEPATCH_BYE) $(DESTDIR)$(DEBUG_DIR)/$(LIVEPATCH_BYE)
$(INSTALL_DATA) $(LIVEPATCH_REPLACE) $(DESTDIR)$(DEBUG_DIR)/$(LIVEPATCH_REPLACE)
+ $(INSTALL_DATA) $(LIVEPATCH_NOP) $(DESTDIR)$(DEBUG_DIR)/$(LIVEPATCH_NOP)
uninstall:
rm -f $(DESTDIR)$(DEBUG_DIR)/$(LIVEPATCH)
rm -f $(DESTDIR)$(DEBUG_DIR)/$(LIVEPATCH_BYE)
rm -f $(DESTDIR)$(DEBUG_DIR)/$(LIVEPATCH_REPLACE)
+ rm -f $(DESTDIR)$(DEBUG_DIR)/$(LIVEPATCH_NOP)
.PHONY: clean
clean::
@@ -41,9 +44,13 @@ clean::
.PHONY: config.h
config.h: OLD_CODE_SZ=$(call CODE_SZ,$(BASEDIR)/xen-syms,xen_extra_version)
config.h: NEW_CODE_SZ=$(call CODE_SZ,$<,xen_hello_world)
+config.h: MINOR_VERSION_SZ=$(call CODE_SZ,$(BASEDIR)/xen-syms,xen_minor_version)
+config.h: MINOR_VERSION_ADDR=$(call CODE_ADDR,$(BASEDIR)/xen-syms,xen_minor_version)
config.h: xen_hello_world_func.o
(set -e; \
echo "#define NEW_CODE_SZ $(NEW_CODE_SZ)"; \
+ echo "#define MINOR_VERSION_SZ $(MINOR_VERSION_SZ)"; \
+ echo "#define MINOR_VERSION_ADDR $(MINOR_VERSION_ADDR)"; \
echo "#define OLD_CODE_SZ $(OLD_CODE_SZ)") > $@
xen_hello_world.o: config.h
@@ -92,5 +99,11 @@ xen_replace_world.o: config.h
$(LIVEPATCH_REPLACE): xen_replace_world_func.o xen_replace_world.o note.o
$(LD) $(LDFLAGS) $(build_id_linker) -r -o $(LIVEPATCH_REPLACE) $^
+xen_nop.o: config.h
+
+.PHONY: $(LIVEPATCH_NOP)
+$(LIVEPATCH_NOP): xen_nop.o note.o
+ $(LD) $(LDFLAGS) $(build_id_linker) -r -o $(LIVEPATCH_NOP) $^
+
.PHONY: livepatch
-livepatch: $(LIVEPATCH) $(LIVEPATCH_BYE) $(LIVEPATCH_REPLACE)
+livepatch: $(LIVEPATCH) $(LIVEPATCH_BYE) $(LIVEPATCH_REPLACE) $(LIVEPATCH_NOP)
diff --git a/xen/test/livepatch/xen_nop.c b/xen/test/livepatch/xen_nop.c
new file mode 100644
index 0000000..3827979
--- /dev/null
+++ b/xen/test/livepatch/xen_nop.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright (c) 2016 Oracle and/or its affiliates. All rights reserved.
+ *
+ */
+
+#include "config.h"
+#include <xen/types.h>
+
+#include <public/sysctl.h>
+
+/*
+ * All of the .new_size and .old_addr are based on assumptions that the
+ * code for 'xen_minor_version' is compiled in specific way. Before
+ * running this test-case you MUST verify that the assumptions are
+ * correct (Hint: make debug and look in xen.s).
+ */
+struct livepatch_func __section(".livepatch.funcs") livepatch_nop = {
+ .version = LIVEPATCH_PAYLOAD_VERSION,
+ .old_size = MINOR_VERSION_SZ,
+
+#ifdef CONFIG_X86
+ .old_addr = (void *)MINOR_VERSION_ADDR,
+ /* Everything but the last instruction: "req". */
+ .new_size = MINOR_VERSION_SZ-1,
+#endif
+
+#ifdef CONFIG_ARM_64
+ .old_addr = (void *)MINOR_VERSION_ADDR,
+ /* Replace the first one: "mov w0, #0x8". */
+ .new_size = 4,
+#endif
+
+#ifdef CONFIG_ARM_32
+ /* Skip the first instruction: "push {fp}". */
+ .old_addr = (void *)(MINOR_VERSION_ADDR + 4),
+ /* And replace the next three instructions. */
+ .new_size = 3 * 4,
+#endif
+};
+
+/*
+ * Local variables:
+ * mode: C
+ * c-file-style: "BSD"
+ * c-basic-offset: 4
+ * tab-width: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
--
2.5.5
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
next prev parent reply other threads:[~2016-09-16 16:38 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-16 16:38 [PATCH v4] Livepatch for ARM 64 and 32 Konrad Rzeszutek Wilk
2016-09-16 16:38 ` [PATCH v4 01/16] arm/x86/common: Add HAS_[ALTERNATIVE|EX_TABLE] Konrad Rzeszutek Wilk
2016-09-19 9:09 ` Jan Beulich
2016-09-19 9:26 ` Julien Grall
2016-09-19 14:04 ` Konrad Rzeszutek Wilk
2016-09-19 14:09 ` Julien Grall
2016-09-19 14:43 ` Konrad Rzeszutek Wilk
2016-09-16 16:38 ` [PATCH v4 02/16] livepatch: Reject payloads with .alternative or .ex_table if support is not built-in Konrad Rzeszutek Wilk
2016-09-16 16:38 ` [PATCH v4 03/16] arm: poison initmem when it is freed Konrad Rzeszutek Wilk
2016-09-19 9:35 ` Julien Grall
2016-09-19 14:19 ` Konrad Rzeszutek Wilk
2016-09-16 16:38 ` [PATCH v4 04/16] livepatch: Initial ARM64 support Konrad Rzeszutek Wilk
2016-09-19 10:26 ` Julien Grall
2016-09-19 14:33 ` Konrad Rzeszutek Wilk
2016-09-20 9:40 ` Julien Grall
2016-09-16 16:38 ` [PATCH v4 05/16] livepatch: ARM/x86: Check displacement of old_addr and new_addr Konrad Rzeszutek Wilk
2016-09-19 9:19 ` Jan Beulich
2016-09-19 13:12 ` Julien Grall
2016-09-16 16:38 ` [PATCH v4 06/16] livepatch: ARM 32|64: Ignore mapping symbols: $[d, a, x] Konrad Rzeszutek Wilk
2016-09-16 16:38 ` [PATCH v4 07/16] livepatch/arm/x86: Check payload for for unwelcomed symbols Konrad Rzeszutek Wilk
2016-09-19 9:27 ` Jan Beulich
2016-09-19 13:33 ` Julien Grall
2016-09-19 14:11 ` Jan Beulich
2016-09-19 14:13 ` Julien Grall
2016-09-19 14:48 ` Jan Beulich
2016-09-19 17:32 ` Konrad Rzeszutek Wilk
2016-09-20 7:00 ` Jan Beulich
2016-09-20 9:44 ` Julien Grall
2016-09-16 16:38 ` [PATCH v4 08/16] livepatch: Move test-cases to their own sub-directory in test Konrad Rzeszutek Wilk
2016-09-16 16:58 ` Konrad Rzeszutek Wilk
2016-09-16 16:38 ` [PATCH v4 09/16] livepatch: tests: Make them compile under ARM64 Konrad Rzeszutek Wilk
2016-09-19 13:35 ` Julien Grall
2016-09-16 16:38 ` [PATCH v4 10/16] livepatch: x86, ARM, alternative: Expose FEATURE_LIVEPATCH Konrad Rzeszutek Wilk
2016-09-19 13:47 ` Julien Grall
2016-09-16 16:38 ` [PATCH v4 11/16] xen/arm32: Add an helper to invalidate all instruction caches Konrad Rzeszutek Wilk
2016-09-19 14:24 ` Julien Grall
2016-09-16 16:38 ` [PATCH v4 12/16] bug/x86/arm: Align bug_frames sections Konrad Rzeszutek Wilk
2016-09-19 9:29 ` Jan Beulich
2016-09-19 14:34 ` Julien Grall
2016-09-19 14:35 ` Julien Grall
2016-09-19 20:19 ` Konrad Rzeszutek Wilk
2016-09-19 20:26 ` Konrad Rzeszutek Wilk
2016-09-20 9:46 ` Julien Grall
2016-09-16 16:38 ` [PATCH v4 13/16] livepatch: Initial ARM32 support Konrad Rzeszutek Wilk
2016-09-19 14:39 ` Julien Grall
2016-09-16 16:38 ` [PATCH v4 14/16] livepatch, arm[32|64]: Share arch_livepatch_revert_jmp Konrad Rzeszutek Wilk
2016-09-19 14:43 ` Julien Grall
2016-09-16 16:38 ` Konrad Rzeszutek Wilk [this message]
2016-09-16 16:38 ` [PATCH v4 16/16] livepatch: In xen_nop test-case remove the .bss and .data sections Konrad Rzeszutek Wilk
2016-09-19 9:32 ` Jan Beulich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1474043908-12101-16-git-send-email-konrad.wilk@oracle.com \
--to=konrad.wilk@oracle.com \
--cc=andrew.cooper3@citrix.com \
--cc=jbeulich@suse.com \
--cc=julien.grall@arm.com \
--cc=konrad@kernel.org \
--cc=ross.lagerwall@citrix.com \
--cc=sstabellini@kernel.org \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).