From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: konrad@kernel.org, xen-devel@lists.xenproject.org,
ross.lagerwall@citrix.com, sstabellini@kernel.org,
julien.grall@arm.com
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Subject: [PATCH v5 04/16] arm: poison initmem when it is freed.
Date: Wed, 21 Sep 2016 13:32:22 -0400 [thread overview]
Message-ID: <1474479154-20991-5-git-send-email-konrad.wilk@oracle.com> (raw)
In-Reply-To: <1474479154-20991-1-git-send-email-konrad.wilk@oracle.com>
The current byte sequence is '0xcc' which makes sense on x86,
but on ARM it is:
cccccccc stclgt 12, cr12, [ip], {204} ; 0xcc
Picking something more ARM applicable such as:
efefefef svc 0x00efefef
Creates a nice crash if one executes that code:
(XEN) CPU1: Unexpected Trap: Supervisor Call
But unfortunately that may not be a good choice either as in the future
we may want to implement support for it.
Julien suggested that we use a 4-byte insn instruction instead
of trying to work with one byte. To make sure nothing goes bad
we also require that the __init_[begin|end] be aligned properly.
As such on ARM 32 we use the udf instruction (see A8.8.247
in ARM DDI 0406C.c) and on ARM 64 use the AARCH64_BREAK_FAULT
instruction (aka brk instruction).
We don't have to worry about Thumb code so this instruction
is a safe to execute.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
Cc: Julien Grall <julien.grall@arm.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
v3: New submission
v4: Instead of using 0xef, use specific insn for architectures.
v5: Add BUILD_BUG_ON
Fix the loop to cover the full 'len' instead of 1/4 of it
(used __init_begin which is a char instead of uint32_t).
---
xen/arch/arm/mm.c | 15 ++++++++++++++-
xen/arch/arm/xen.lds.S | 6 ++++++
2 files changed, 20 insertions(+), 1 deletion(-)
diff --git a/xen/arch/arm/mm.c b/xen/arch/arm/mm.c
index 07e2037..99588a3 100644
--- a/xen/arch/arm/mm.c
+++ b/xen/arch/arm/mm.c
@@ -994,8 +994,21 @@ void free_init_memory(void)
{
paddr_t pa = virt_to_maddr(__init_begin);
unsigned long len = __init_end - __init_begin;
+ uint32_t insn;
+ unsigned int i, nr = len / sizeof(insn);
+ uint32_t *p;
+
set_pte_flags_on_range(__init_begin, len, mg_rw);
- memset(__init_begin, 0xcc, len);
+#ifdef CONFIG_ARM_32
+ /* udf instruction i.e (see A8.8.247 in ARM DDI 0406C.c) */
+ insn = 0xe7f000f0;
+#else
+ insn = AARCH64_BREAK_FAULT;
+#endif
+ p = (uint32_t *)__init_begin;
+ for ( i = 0; i < nr; i++ )
+ *(p + i) = insn;
+
set_pte_flags_on_range(__init_begin, len, mg_clear);
init_domheap_pages(pa, pa + len);
printk("Freed %ldkB init memory.\n", (long)(__init_end-__init_begin)>>10);
diff --git a/xen/arch/arm/xen.lds.S b/xen/arch/arm/xen.lds.S
index 47b910d..ddef595 100644
--- a/xen/arch/arm/xen.lds.S
+++ b/xen/arch/arm/xen.lds.S
@@ -221,3 +221,9 @@ SECTIONS
* code running on the boot time identity map cannot cross a section boundary.
*/
ASSERT( _end_boot - start <= PAGE_SIZE, "Boot code is larger than 4K")
+/*
+ * __init_[begin|end] MUST be at word size boundary otherwise we cannot
+ * write fault instructions in the space properly.
+ */
+ASSERT(IS_ALIGNED(__init_begin, 4), "__init_begin is misaligned")
+ASSERT(IS_ALIGNED(__init_end, 4), "__init_end is misaligned")
--
2.4.11
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
next prev parent reply other threads:[~2016-09-21 17:33 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-21 17:32 [PATCH v5] Livepatch for ARM 64 and 32 Konrad Rzeszutek Wilk
2016-09-21 17:32 ` [PATCH v5 01/16] arm64: s/ALTERNATIVE/HAS_ALTERNATIVE/ Konrad Rzeszutek Wilk
2016-09-22 12:21 ` Julien Grall
2016-09-21 17:32 ` [PATCH v5 02/16] arm/x86/common: Add HAS_[ALTERNATIVE|EX_TABLE] Konrad Rzeszutek Wilk
2016-09-22 12:23 ` Julien Grall
2016-09-22 15:30 ` Ross Lagerwall
2016-09-21 17:32 ` [PATCH v5 03/16] livepatch: Reject payloads with .alternative or .ex_table if support is not built-in Konrad Rzeszutek Wilk
2016-09-23 12:47 ` Ross Lagerwall
2016-09-21 17:32 ` Konrad Rzeszutek Wilk [this message]
2016-09-22 12:28 ` [PATCH v5 04/16] arm: poison initmem when it is freed Julien Grall
2016-09-21 17:32 ` [PATCH v5 05/16] livepatch: Initial ARM64 support Konrad Rzeszutek Wilk
2016-09-22 12:49 ` Julien Grall
2016-09-23 13:38 ` Ross Lagerwall
2016-09-23 15:44 ` Konrad Rzeszutek Wilk
2016-09-27 16:42 ` Julien Grall
2016-09-21 17:32 ` [PATCH v5 06/16] livepatch: ARM/x86: Check displacement of old_addr and new_addr Konrad Rzeszutek Wilk
2016-09-22 12:55 ` Julien Grall
2016-09-23 14:36 ` Ross Lagerwall
2016-09-23 15:37 ` Konrad Rzeszutek Wilk
2016-09-23 15:59 ` Konrad Rzeszutek Wilk
2016-09-28 10:21 ` Ross Lagerwall
2016-09-21 17:32 ` [PATCH v5 07/16] livepatch: ARM 32|64: Ignore mapping symbols: $[d, a, x] Konrad Rzeszutek Wilk
2016-09-22 12:56 ` Julien Grall
2016-09-23 14:44 ` Ross Lagerwall
2016-09-23 16:13 ` Konrad Rzeszutek Wilk
2016-09-21 17:32 ` [PATCH v5 08/16] livepatch/arm/x86: Check payload for for unwelcomed symbols Konrad Rzeszutek Wilk
2016-09-22 13:00 ` Julien Grall
2016-09-23 1:29 ` Konrad Rzeszutek Wilk
2016-09-27 8:49 ` Ross Lagerwall
2016-09-23 14:49 ` Ross Lagerwall
2016-09-23 16:15 ` Konrad Rzeszutek Wilk
2016-09-21 17:32 ` [PATCH v5 09/16] livepatch: Move test-cases to their own sub-directory in test Konrad Rzeszutek Wilk
2016-09-22 13:01 ` Julien Grall
2016-09-23 14:51 ` Ross Lagerwall
2016-09-21 17:32 ` [PATCH v5 10/16] livepatch: x86, ARM, alternative: Expose FEATURE_LIVEPATCH Konrad Rzeszutek Wilk
2016-09-22 13:03 ` Julien Grall
2016-09-27 9:49 ` Ross Lagerwall
2016-09-21 17:32 ` [PATCH v5 11/16] livepatch: tests: Make them compile under ARM64 Konrad Rzeszutek Wilk
2016-09-22 13:10 ` Julien Grall
2016-09-22 19:26 ` Konrad Rzeszutek Wilk
2016-09-23 1:33 ` Konrad Rzeszutek Wilk
2016-09-23 9:50 ` Julien Grall
2016-09-27 9:49 ` Ross Lagerwall
2016-09-21 17:32 ` [PATCH v5 12/16] xen/arm32: Add an helper to invalidate all instruction caches Konrad Rzeszutek Wilk
2016-09-22 13:17 ` Julien Grall
2016-09-21 17:32 ` [PATCH v5 13/16] bug/x86/arm: Align bug_frames sections Konrad Rzeszutek Wilk
2016-09-21 17:32 ` [PATCH v5 14/16] livepatch: Initial ARM32 support Konrad Rzeszutek Wilk
2016-09-27 16:39 ` Julien Grall
2016-09-27 17:50 ` Konrad Rzeszutek Wilk
2016-09-27 23:13 ` Julien Grall
2016-09-21 17:32 ` [PATCH v5 15/16] livepatch, arm[32|64]: Share arch_livepatch_revert Konrad Rzeszutek Wilk
2016-09-23 14:59 ` Ross Lagerwall
2016-09-23 16:15 ` Konrad Rzeszutek Wilk
2016-09-21 17:32 ` [PATCH v5 16/16] livepatch: arm[32, 64], x86: NOP test-case Konrad Rzeszutek Wilk
2016-09-22 13:23 ` Julien Grall
2016-09-23 1:35 ` Konrad Rzeszutek Wilk
2016-09-23 9:53 ` Julien Grall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1474479154-20991-5-git-send-email-konrad.wilk@oracle.com \
--to=konrad.wilk@oracle.com \
--cc=julien.grall@arm.com \
--cc=konrad@kernel.org \
--cc=ross.lagerwall@citrix.com \
--cc=sstabellini@kernel.org \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).