xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Dario Faggioli <dario.faggioli@citrix.com>
To: xen-devel@lists.xenproject.org
Cc: George Dunlap <george.dunlap@eu.citrix.com>,
	Anshul Makkar <anshul.makkar@citrix.com>,
	Meng Xu <mengxu@cis.upenn.edu>
Subject: [PATCH v2 06/10] xen: tracing: add trace records for schedule and rate-limiting.
Date: Fri, 30 Sep 2016 04:54:00 +0200	[thread overview]
Message-ID: <147520404038.22544.12557551024149852193.stgit@Solace.fritz.box> (raw)
In-Reply-To: <147520253247.22544.10673844222866363947.stgit@Solace.fritz.box>

As far as {csched, csched2, rt}_schedule() are concerned,
an "empty" event, would already make it easier to read and
understand a trace.

But while there, add a few useful information, like
if the cpu that is going through the scheduler has
been tickled or not, if it is currently idle, etc
(they vary, on a per-scheduler basis).

For Credit1 and Credit2, add a record about when
rate-limiting kicks in too.

Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
---
Cc: George Dunlap <george.dunlap@eu.citrix.com>
Cc: Meng Xu <mengxu@cis.upenn.edu>
Cc: Anshul Makkar <anshul.makkar@citrix.com>
---
Changes from v1:
 * corrected the schedule record for sched_rt.c, as pointed out during review;
 * pack the Credit1 records as well, as requested during review.
---
 xen/common/sched_credit.c  |   32 ++++++++++++++++++++++++++++++++
 xen/common/sched_credit2.c |   40 +++++++++++++++++++++++++++++++++++++++-
 xen/common/sched_rt.c      |   15 +++++++++++++++
 3 files changed, 86 insertions(+), 1 deletion(-)

diff --git a/xen/common/sched_credit.c b/xen/common/sched_credit.c
index 5700763..fc3a321 100644
--- a/xen/common/sched_credit.c
+++ b/xen/common/sched_credit.c
@@ -133,6 +133,8 @@
 #define TRC_CSCHED_TICKLE        TRC_SCHED_CLASS_EVT(CSCHED, 6)
 #define TRC_CSCHED_BOOST_START   TRC_SCHED_CLASS_EVT(CSCHED, 7)
 #define TRC_CSCHED_BOOST_END     TRC_SCHED_CLASS_EVT(CSCHED, 8)
+#define TRC_CSCHED_SCHEDULE      TRC_SCHED_CLASS_EVT(CSCHED, 9)
+#define TRC_CSCHED_RATELIMIT     TRC_SCHED_CLASS_EVT(CSCHED, 10)
 
 
 /*
@@ -1774,6 +1776,23 @@ csched_schedule(
     SCHED_STAT_CRANK(schedule);
     CSCHED_VCPU_CHECK(current);
 
+    /*
+     * Here in Credit1 code, we usually just call TRACE_nD() helpers, and
+     * don't care about packing. But scheduling happens very often, so it
+     * actually is important that the record is as small as possible.
+     */
+    if ( unlikely(tb_init_done) )
+    {
+        struct {
+            unsigned cpu:16, tasklet:8, idle:8;
+        } d;
+        d.cpu = cpu;
+        d.tasklet = tasklet_work_scheduled;
+        d.idle = is_idle_vcpu(current);
+        __trace_var(TRC_CSCHED_SCHEDULE, 1, sizeof(d),
+                    (unsigned char *)&d);
+    }
+
     runtime = now - current->runstate.state_entry_time;
     if ( runtime < 0 ) /* Does this ever happen? */
         runtime = 0;
@@ -1829,6 +1848,19 @@ csched_schedule(
         tslice = MICROSECS(prv->ratelimit_us) - runtime;
         if ( unlikely(runtime < CSCHED_MIN_TIMER) )
             tslice = CSCHED_MIN_TIMER;
+        if ( unlikely(tb_init_done) )
+        {
+            struct {
+                unsigned vcpu:16, dom:16;
+                unsigned runtime;
+            } d;
+            d.dom = scurr->vcpu->domain->domain_id;
+            d.vcpu = scurr->vcpu->vcpu_id;
+            d.runtime = runtime;
+            __trace_var(TRC_CSCHED_RATELIMIT, 1, sizeof(d),
+                        (unsigned char *)&d);
+        }
+
         ret.migrated = 0;
         goto out;
     }
diff --git a/xen/common/sched_credit2.c b/xen/common/sched_credit2.c
index fde61ef..5cf3f16 100644
--- a/xen/common/sched_credit2.c
+++ b/xen/common/sched_credit2.c
@@ -55,6 +55,8 @@
 #define TRC_CSCHED2_LOAD_BALANCE     TRC_SCHED_CLASS_EVT(CSCHED2, 17)
 #define TRC_CSCHED2_PICKED_CPU       TRC_SCHED_CLASS_EVT(CSCHED2, 19)
 #define TRC_CSCHED2_RUNQ_CANDIDATE   TRC_SCHED_CLASS_EVT(CSCHED2, 20)
+#define TRC_CSCHED2_SCHEDULE         TRC_SCHED_CLASS_EVT(CSCHED2, 21)
+#define TRC_CSCHED2_RATELIMIT        TRC_SCHED_CLASS_EVT(CSCHED2, 22)
 
 /*
  * WARNING: This is still in an experimental phase.  Status and work can be found at the
@@ -2288,12 +2290,29 @@ runq_candidate(struct csched2_runqueue_data *rqd,
      * no point forcing it to do so until rate limiting expires.
      */
     if ( __test_and_clear_bit(__CSFLAG_vcpu_yield, &scurr->flags) )
+    {
         yield_bias = CSCHED2_YIELD_BIAS;
+    }
     else if ( prv->ratelimit_us && !is_idle_vcpu(scurr->vcpu) &&
               vcpu_runnable(scurr->vcpu) &&
               (now - scurr->vcpu->runstate.state_entry_time) <
                MICROSECS(prv->ratelimit_us) )
+    {
+        if ( unlikely(tb_init_done) )
+        {
+            struct {
+                unsigned vcpu:16, dom:16;
+                unsigned runtime;
+            } d;
+            d.dom = scurr->vcpu->domain->domain_id;
+            d.vcpu = scurr->vcpu->vcpu_id;
+            d.runtime = now - scurr->vcpu->runstate.state_entry_time;
+            __trace_var(TRC_CSCHED2_RATELIMIT, 1,
+                        sizeof(d),
+                        (unsigned char *)&d);
+        }
         return scurr;
+    }
 
     /* Default to current if runnable, idle otherwise */
     if ( vcpu_runnable(scurr->vcpu) )
@@ -2383,6 +2402,7 @@ csched2_schedule(
     struct csched2_vcpu *snext = NULL;
     unsigned int skipped_vcpus = 0;
     struct task_slice ret;
+    bool_t tickled;
 
     SCHED_STAT_CRANK(schedule);
     CSCHED2_VCPU_CHECK(current);
@@ -2397,13 +2417,31 @@ csched2_schedule(
     BUG_ON(!is_idle_vcpu(scurr->vcpu) && scurr->rqd != rqd);
 
     /* Clear "tickled" bit now that we've been scheduled */
-    if ( cpumask_test_cpu(cpu, &rqd->tickled) )
+    tickled = cpumask_test_cpu(cpu, &rqd->tickled);
+    if ( tickled )
     {
         __cpumask_clear_cpu(cpu, &rqd->tickled);
         cpumask_andnot(cpumask_scratch, &rqd->idle, &rqd->tickled);
         smt_idle_mask_set(cpu, cpumask_scratch, &rqd->smt_idle);
     }
 
+    if ( unlikely(tb_init_done) )
+    {
+        struct {
+            unsigned cpu:16, rq_id:16;
+            unsigned tasklet:8, idle:8, smt_idle:8, tickled:8;
+        } d;
+        d.cpu = cpu;
+        d.rq_id = c2r(ops, cpu);
+        d.tasklet = tasklet_work_scheduled;
+        d.idle = is_idle_vcpu(current);
+        d.smt_idle = cpumask_test_cpu(cpu, &rqd->smt_idle);
+        d.tickled = tickled;
+        __trace_var(TRC_CSCHED2_SCHEDULE, 1,
+                    sizeof(d),
+                    (unsigned char *)&d);
+    }
+
     /* Update credits */
     burn_credits(rqd, scurr, now);
 
diff --git a/xen/common/sched_rt.c b/xen/common/sched_rt.c
index 41c61a7..d95f798 100644
--- a/xen/common/sched_rt.c
+++ b/xen/common/sched_rt.c
@@ -160,6 +160,7 @@
 #define TRC_RTDS_BUDGET_BURN      TRC_SCHED_CLASS_EVT(RTDS, 3)
 #define TRC_RTDS_BUDGET_REPLENISH TRC_SCHED_CLASS_EVT(RTDS, 4)
 #define TRC_RTDS_SCHED_TASKLET    TRC_SCHED_CLASS_EVT(RTDS, 5)
+#define TRC_RTDS_SCHEDULE         TRC_SCHED_CLASS_EVT(RTDS, 6)
 
 static void repl_timer_handler(void *data);
 
@@ -1035,6 +1036,20 @@ rt_schedule(const struct scheduler *ops, s_time_t now, bool_t tasklet_work_sched
     struct rt_vcpu *snext = NULL;
     struct task_slice ret = { .migrated = 0 };
 
+    /* TRACE */
+    {
+        struct __packed {
+            unsigned cpu:16, tasklet:8, tickled:4, idle:4;
+        } d;
+        d.cpu = cpu;
+        d.tasklet = tasklet_work_scheduled;
+        d.tickled = cpumask_test_cpu(cpu, &prv->tickled);
+        d.idle = is_idle_vcpu(current);
+        trace_var(TRC_RTDS_SCHEDULE, 1,
+                  sizeof(d),
+                  (unsigned char *)&d);
+    }
+
     /* clear ticked bit now that we've been scheduled */
     cpumask_clear_cpu(cpu, &prv->tickled);
 


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

  parent reply	other threads:[~2016-09-30  2:54 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-30  2:53 [PATCH v2 00/10] sched: Credit1 and Credit2 improvements... but *NO* soft-affinity for Credit2! Dario Faggioli
2016-09-30  2:53 ` [PATCH v2 01/10] xen: credit1: return the 'time remaining to the limit' as next timeslice Dario Faggioli
2016-09-30 11:16   ` George Dunlap
2016-09-30  2:53 ` [PATCH v2 02/10] xen: credit1: don't rate limit context switches in case of yields Dario Faggioli
2016-09-30 11:18   ` George Dunlap
2016-09-30  2:53 ` [PATCH v2 03/10] xen: credit2: make tickling more deterministic Dario Faggioli
2016-09-30 11:25   ` George Dunlap
2016-09-30  2:53 ` [PATCH v2 04/10] xen: credit2: only reset credit on reset condition Dario Faggioli
2016-09-30 11:28   ` George Dunlap
2016-09-30 12:25   ` anshul makkar
2016-09-30 12:57     ` Dario Faggioli
2016-09-30  2:53 ` [PATCH v2 05/10] xen: credit2: implement yield() Dario Faggioli
2016-09-30 12:52   ` George Dunlap
2016-09-30 14:01     ` Dario Faggioli
2016-09-30  2:54 ` Dario Faggioli [this message]
2016-09-30 13:16   ` [PATCH v2 06/10] xen: tracing: add trace records for schedule and rate-limiting George Dunlap
2016-10-01  0:18   ` Meng Xu
2016-09-30  2:54 ` [PATCH v2 07/10] tools: tracing: handle more scheduling related events Dario Faggioli
2016-09-30 10:22   ` Ian Jackson
2016-09-30  2:54 ` [PATCH v2 08/10] libxl: fix coding style of credit1 parameters related functions Dario Faggioli
2016-09-30 10:24   ` Ian Jackson
2016-09-30 12:04     ` Dario Faggioli
2016-09-30 13:25       ` George Dunlap
2016-09-30  2:54 ` [PATCH v2 09/10] libxl: allow to set the ratelimit value online for Credit2 Dario Faggioli
2016-09-30 10:30   ` Ian Jackson
2016-09-30 10:33     ` George Dunlap
2016-09-30 10:35       ` Ian Jackson
2016-09-30 12:37       ` Dario Faggioli
2016-09-30  2:54 ` [PATCH v2 10/10] xl: " Dario Faggioli
2016-09-30 10:34   ` Ian Jackson
2016-09-30 15:54     ` Dario Faggioli
2016-09-30 16:02       ` Ian Jackson
2016-10-13 22:19   ` Jim Fehlig
2016-10-14 11:31     ` George Dunlap
2016-09-30 13:51 ` [PATCH v2 00/10] sched: Credit1 and Credit2 improvements... but *NO* soft-affinity for Credit2! George Dunlap
2016-09-30 14:06   ` Dario Faggioli
2016-09-30 14:10     ` George Dunlap
2016-09-30 14:12       ` Dario Faggioli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=147520404038.22544.12557551024149852193.stgit@Solace.fritz.box \
    --to=dario.faggioli@citrix.com \
    --cc=anshul.makkar@citrix.com \
    --cc=george.dunlap@eu.citrix.com \
    --cc=mengxu@cis.upenn.edu \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).