From: Ian Jackson <ian.jackson@eu.citrix.com>
To: xen-devel@lists.xenproject.org
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
Subject: [OSSTEST PATCH 01/16] rump-test-net: New test program
Date: Fri, 7 Oct 2016 17:34:41 +0100 [thread overview]
Message-ID: <1475858096-16123-2-git-send-email-ian.jackson@eu.citrix.com> (raw)
In-Reply-To: <1475858096-16123-1-git-send-email-ian.jackson@eu.citrix.com>
The rump kernel WOPR test is no more, so we reimplement it. This test
program simply listens on a TCP socket and says hi when you connect to
it. It's a portable program. So far, this has been tested on Linux,
but not in the rump environment.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
---
rump-test-net.c | 65 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 65 insertions(+)
create mode 100644 rump-test-net.c
diff --git a/rump-test-net.c b/rump-test-net.c
new file mode 100644
index 0000000..96dbb1c
--- /dev/null
+++ b/rump-test-net.c
@@ -0,0 +1,65 @@
+/*
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <assert.h>
+#include <sys/socket.h>
+#include <netinet/in.h>
+#include <sys/fcntl.h>
+
+static int master;
+
+int main(int argc, const char *const *argv) {
+ struct sockaddr_in6 sin6;
+ int r;
+
+ assert(argc==2);
+
+ master = socket(AF_INET6,SOCK_STREAM,0);
+ if (master<0) { perror("socket"); exit(-1); }
+
+ int port = atoi(argv[1]);
+
+ memset(&sin6,0,sizeof(sin6));
+ sin6.sin6_family = AF_INET6;
+ sin6.sin6_port = htons(port);
+ sin6.sin6_addr = in6addr_any;
+
+ r = bind(master,(struct sockaddr*)&sin6,sizeof(sin6));
+ if (r) { perror("bind"); exit(-1); }
+
+ r = listen(master,5);
+ if (r) { perror("listen"); exit(-1); }
+
+ fprintf(stderr,"listening on %d\n",port);
+
+ int slave = -1;
+ for (;;) {
+ static const char message[] = "hello\r\n";
+ static const int messagel = sizeof(message)-1;
+
+ if (slave > 0) close(slave);
+
+ slave = accept(master,0,0);
+ if (slave < 0) { perror("accept"); continue; }
+
+ r = fcntl(slave, F_GETFL);
+ if (r < 0) { perror("F_GETFL"); continue; }
+ r = fcntl(slave, F_SETFL, r | O_NONBLOCK);
+ if (r < 0) { perror("F_SETFL"); continue; }
+
+ r = write(slave, message, messagel);
+ if (r < 0) { perror("write"); continue; }
+ else if (r != messagel) {
+ fprintf(stderr,"write: %d (!= %d",r,messagel);
+ continue;
+ }
+
+ r = close(slave);
+ slave = -1;
+ if (r < 0) { perror("close"); continue; }
+ }
+}
--
2.1.4
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
next prev parent reply other threads:[~2016-10-07 16:35 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-07 16:34 [OSSTEST PATCH 00/16] Fix rump kernel tests Ian Jackson
2016-10-07 16:34 ` Ian Jackson [this message]
2016-10-07 16:34 ` [OSSTEST PATCH 02/16] rump-test-net: setsockopt V6ONLY off Ian Jackson
2016-10-07 16:34 ` [OSSTEST PATCH 03/16] BuildSupport: builddirsprops: Clean up each builddir Ian Jackson
2016-10-07 16:34 ` [OSSTEST PATCH 04/16] Support guest-specific "toolstack" for guest creation Ian Jackson
2016-10-07 16:34 ` [OSSTEST PATCH 05/16] rump kernels: Provide rumprun toolstack Ian Jackson
2016-10-07 16:34 ` [OSSTEST PATCH 06/16] rump kernels: Specify toolstack for rumprun demo to be rumprun Ian Jackson
2016-10-07 16:34 ` [OSSTEST PATCH 07/16] rump kernels: ts-rumprun-bake: Do not tolerate errors Ian Jackson
2016-10-07 16:34 ` [OSSTEST PATCH 08/16] rump kernels: Provide proper DHCP instructions to rumprun Ian Jackson
2016-10-07 16:34 ` [OSSTEST PATCH 09/16] rump kernels: Provide networking test Ian Jackson
2016-10-07 16:34 ` [OSSTEST PATCH 10/16] TestSupport: guest_unprepare_disk: Make a no-op for guests with no Lvdev Ian Jackson
2016-10-07 16:34 ` [OSSTEST PATCH 11/16] rumprun: xenstorels: Better new regexps for finding output Ian Jackson
2016-10-07 16:34 ` [OSSTEST PATCH 12/16] rumprun: Disable unwanted builds Ian Jackson
2016-10-07 16:34 ` [OSSTEST PATCH 13/16] rump kernels: Adjust indentation in run-job/test-rumprun Ian Jackson
2016-10-07 16:34 ` [OSSTEST PATCH 14/16] rump kernels: Install binutils on test box Ian Jackson
2016-10-07 16:34 ` [OSSTEST PATCH 15/16] make-flight: Honour $bfi (build flight) for rump tests Ian Jackson
2016-10-07 16:34 ` [OSSTEST PATCH 16/16] rump kernels: Build with RUMP_DEV_XEN_DEBUG and filter out debug messages Ian Jackson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1475858096-16123-2-git-send-email-ian.jackson@eu.citrix.com \
--to=ian.jackson@eu.citrix.com \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).