From: Roger Pau Monne <roger.pau@citrix.com>
To: xen-devel@lists.xenproject.org, boris.ostrovsky@oracle.com,
konrad.wilk@oracle.com
Cc: George Dunlap <george.dunlap@eu.citrix.com>,
Andrew Cooper <andrew.cooper3@citrix.com>,
Jan Beulich <jbeulich@suse.com>,
Roger Pau Monne <roger.pau@citrix.com>
Subject: [PATCH v3.1 08/15] x86/vtd: fix mapping of RMRR regions
Date: Sat, 29 Oct 2016 10:59:54 +0200 [thread overview]
Message-ID: <1477731601-10926-9-git-send-email-roger.pau@citrix.com> (raw)
In-Reply-To: <1477731601-10926-1-git-send-email-roger.pau@citrix.com>
Currently RMRR regions are only mapped to the hardware domain or to
non-translated domains that use an IOMMU. In order to fix this, make sure
set_identity_p2m_entry sets the appropriate IOMMU mappings, and that
clear_identity_p2m_entry also removes them.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
---
Cc: George Dunlap <george.dunlap@eu.citrix.com>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
---
xen/arch/x86/mm/p2m.c | 37 ++++++++++++++++++++++++-------------
1 file changed, 24 insertions(+), 13 deletions(-)
diff --git a/xen/arch/x86/mm/p2m.c b/xen/arch/x86/mm/p2m.c
index 6a45185..da3e937 100644
--- a/xen/arch/x86/mm/p2m.c
+++ b/xen/arch/x86/mm/p2m.c
@@ -1049,22 +1049,29 @@ int set_identity_p2m_entry(struct domain *d, unsigned long gfn,
mfn = p2m->get_entry(p2m, gfn, &p2mt, &a, 0, NULL, NULL);
- if ( p2mt == p2m_invalid || p2mt == p2m_mmio_dm )
+ switch ( p2mt )
+ {
+ case p2m_invalid:
+ case p2m_mmio_dm:
ret = p2m_set_entry(p2m, gfn, _mfn(gfn), PAGE_ORDER_4K,
p2m_mmio_direct, p2ma);
- else if ( mfn_x(mfn) == gfn && p2mt == p2m_mmio_direct && a == p2ma )
- {
- ret = 0;
- /*
- * PVH fixme: during Dom0 PVH construction, p2m entries are being set
- * but iomem regions are not mapped with IOMMU. This makes sure that
- * RMRRs are correctly mapped with IOMMU.
- */
- if ( is_hardware_domain(d) && !iommu_use_hap_pt(d) )
+ if ( ret )
+ break;
+ /* fallthrough */
+ case p2m_mmio_direct:
+ if ( p2mt == p2m_mmio_direct && a != p2ma )
+ {
+ printk(XENLOG_G_WARNING
+ "Cannot setup identity map d%d:%lx, already mapped with "
+ "different access type (current: %d, requested: %d).\n",
+ d->domain_id, gfn, a, p2ma);
+ ret = (flag & XEN_DOMCTL_DEV_RDM_RELAXED) ? 0 : -EBUSY;
+ break;
+ }
+ if ( !iommu_use_hap_pt(d) )
ret = iommu_map_page(d, gfn, gfn, IOMMUF_readable|IOMMUF_writable);
- }
- else
- {
+ break;
+ default:
if ( flag & XEN_DOMCTL_DEV_RDM_RELAXED )
ret = 0;
else
@@ -1073,6 +1080,7 @@ int set_identity_p2m_entry(struct domain *d, unsigned long gfn,
"Cannot setup identity map d%d:%lx,"
" gfn already mapped to %lx.\n",
d->domain_id, gfn, mfn_x(mfn));
+ break;
}
gfn_unlock(p2m, gfn, 0);
@@ -1149,6 +1157,9 @@ int clear_identity_p2m_entry(struct domain *d, unsigned long gfn)
{
ret = p2m_set_entry(p2m, gfn, INVALID_MFN, PAGE_ORDER_4K,
p2m_invalid, p2m->default_access);
+ if ( !iommu_use_hap_pt(d) )
+ ret = iommu_unmap_page(d, gfn) ? : ret;
+
gfn_unlock(p2m, gfn, 0);
}
else
--
2.7.4 (Apple Git-66)
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
next prev parent reply other threads:[~2016-10-29 9:00 UTC|newest]
Thread overview: 89+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-29 8:59 [PATCH v3.1 00/15] Initial PVHv2 Dom0 support Roger Pau Monne
2016-10-29 8:59 ` [PATCH v3.1 01/15] xen/x86: remove XENFEAT_hvm_pirqs for PVHv2 guests Roger Pau Monne
2016-10-31 16:32 ` Jan Beulich
2016-11-03 12:35 ` Roger Pau Monne
2016-11-03 12:52 ` Jan Beulich
2016-11-03 14:25 ` Konrad Rzeszutek Wilk
2016-11-03 15:05 ` Roger Pau Monne
2016-11-03 14:22 ` Konrad Rzeszutek Wilk
2016-11-03 15:01 ` Roger Pau Monne
2016-11-03 15:43 ` Roger Pau Monne
2016-10-29 8:59 ` [PATCH v3.1 02/15] xen/x86: fix return value of *_set_allocation functions Roger Pau Monne
2016-10-29 22:11 ` Tim Deegan
2016-10-29 8:59 ` [PATCH v3.1 03/15] xen/x86: allow calling {sh/hap}_set_allocation with the idle domain Roger Pau Monne
2016-10-31 16:34 ` Jan Beulich
2016-11-01 10:45 ` Tim Deegan
2016-11-02 17:14 ` Roger Pau Monne
2016-11-03 10:20 ` Roger Pau Monne
2016-11-03 10:33 ` Tim Deegan
2016-11-03 11:31 ` Jan Beulich
2016-10-29 8:59 ` [PATCH v3.1 04/15] xen/x86: assert that local_events_need_delivery is not called by " Roger Pau Monne
2016-10-31 16:37 ` Jan Beulich
2016-10-29 8:59 ` [PATCH v3.1 05/15] x86/paging: introduce paging_set_allocation Roger Pau Monne
2016-10-31 16:42 ` Jan Beulich
2016-11-01 10:29 ` Tim Deegan
2016-10-29 8:59 ` [PATCH v3.1 06/15] xen/x86: split the setup of Dom0 permissions to a function Roger Pau Monne
2016-10-31 16:44 ` Jan Beulich
2016-10-29 8:59 ` [PATCH v3.1 07/15] xen/x86: do the PCI scan unconditionally Roger Pau Monne
2016-10-31 16:47 ` Jan Beulich
2016-11-03 10:58 ` Roger Pau Monne
2016-11-03 11:35 ` Jan Beulich
2016-11-03 11:54 ` Boris Ostrovsky
2016-11-29 12:33 ` Roger Pau Monne
2016-11-29 12:47 ` Jan Beulich
2016-11-29 12:57 ` Roger Pau Monne
2016-11-30 5:53 ` Tian, Kevin
2016-11-30 9:02 ` Jan Beulich
2016-10-29 8:59 ` Roger Pau Monne [this message]
2016-11-04 9:16 ` [PATCH v3.1 08/15] x86/vtd: fix mapping of RMRR regions Jan Beulich
2016-11-04 9:45 ` Roger Pau Monne
2016-11-04 10:34 ` Jan Beulich
2016-11-04 12:25 ` Roger Pau Monne
2016-11-04 12:53 ` Jan Beulich
2016-11-04 13:03 ` Roger Pau Monne
2016-11-04 13:16 ` Jan Beulich
2016-11-04 15:33 ` Roger Pau Monne
2016-11-04 16:13 ` Jan Beulich
2016-11-04 16:19 ` Roger Pau Monne
2016-11-04 17:08 ` Jan Beulich
2016-11-04 17:25 ` Roger Pau Monne
2016-11-07 8:36 ` Jan Beulich
2016-10-29 8:59 ` [PATCH v3.1 09/15] xen/x86: allow the emulated APICs to be enabled for the hardware domain Roger Pau Monne
2016-11-04 9:19 ` Jan Beulich
2016-11-04 9:47 ` Roger Pau Monne
2016-11-04 10:21 ` Jan Beulich
2016-11-04 12:09 ` Roger Pau Monne
2016-11-04 12:50 ` Jan Beulich
2016-11-04 13:06 ` Roger Pau Monne
2016-10-29 8:59 ` [PATCH v3.1 10/15] xen/x86: split Dom0 build into PV and PVHv2 Roger Pau Monne
2016-11-11 16:53 ` Jan Beulich
2016-11-16 18:02 ` Roger Pau Monne
2016-11-17 10:49 ` Jan Beulich
2016-11-28 17:49 ` Roger Pau Monne
2016-11-29 9:34 ` Jan Beulich
2016-10-29 8:59 ` [PATCH v3.1 11/15] xen/mm: introduce a function to map large chunks of MMIO Roger Pau Monne
2016-11-11 16:58 ` Jan Beulich
2016-11-29 12:41 ` Roger Pau Monne
2016-11-29 13:00 ` Jan Beulich
2016-11-29 15:32 ` Roger Pau Monne
2016-11-11 20:17 ` Konrad Rzeszutek Wilk
2016-10-29 8:59 ` [PATCH v3.1 12/15] xen/x86: populate PVHv2 Dom0 physical memory map Roger Pau Monne
2016-11-11 17:16 ` Jan Beulich
2016-11-28 11:26 ` Roger Pau Monne
2016-11-28 11:41 ` Jan Beulich
2016-11-28 13:30 ` Roger Pau Monne
2016-11-28 13:49 ` Jan Beulich
2016-11-28 16:02 ` Roger Pau Monne
2016-10-29 8:59 ` [PATCH v3.1 13/15] xen/x86: parse Dom0 kernel for PVHv2 Roger Pau Monne
2016-11-11 20:30 ` Konrad Rzeszutek Wilk
2016-11-28 12:14 ` Roger Pau Monne
2016-10-29 9:00 ` [PATCH v3.1 14/15] xen/x86: hack to setup PVHv2 Dom0 CPUs Roger Pau Monne
2016-10-29 9:00 ` [PATCH v3.1 15/15] xen/x86: setup PVHv2 Dom0 ACPI tables Roger Pau Monne
2016-11-14 16:15 ` Jan Beulich
2016-11-30 12:40 ` Roger Pau Monne
2016-11-30 14:09 ` Jan Beulich
2016-11-30 14:23 ` Roger Pau Monne
2016-11-30 16:38 ` Jan Beulich
2016-10-31 14:35 ` [PATCH v3.1 00/15] Initial PVHv2 Dom0 support Boris Ostrovsky
2016-10-31 14:43 ` Andrew Cooper
2016-10-31 16:35 ` Roger Pau Monne
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1477731601-10926-9-git-send-email-roger.pau@citrix.com \
--to=roger.pau@citrix.com \
--cc=andrew.cooper3@citrix.com \
--cc=boris.ostrovsky@oracle.com \
--cc=george.dunlap@eu.citrix.com \
--cc=jbeulich@suse.com \
--cc=konrad.wilk@oracle.com \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).