From: Boris Ostrovsky <boris.ostrovsky@oracle.com>
To: xen-devel@lists.xen.org
Cc: wei.liu2@citrix.com, andrew.cooper3@citrix.com,
ian.jackson@eu.citrix.com, jbeulich@suse.com,
Boris Ostrovsky <boris.ostrovsky@oracle.com>,
roger.pau@citrix.com
Subject: [PATCH v3 04/11] acpi: Make pmtimer optional in FADT
Date: Mon, 21 Nov 2016 16:00:40 -0500 [thread overview]
Message-ID: <1479762047-29431-5-git-send-email-boris.ostrovsky@oracle.com> (raw)
In-Reply-To: <1479762047-29431-1-git-send-email-boris.ostrovsky@oracle.com>
PM timer is not supported by PVH guests.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
---
Changes in v3:
* Fadt.pm_tmr_len needs to be zero too. (I kept the acks)
tools/firmware/hvmloader/util.c | 3 ++-
tools/libacpi/build.c | 5 +++++
tools/libacpi/libacpi.h | 1 +
3 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/tools/firmware/hvmloader/util.c b/tools/firmware/hvmloader/util.c
index 6e0cfe7..1d78973 100644
--- a/tools/firmware/hvmloader/util.c
+++ b/tools/firmware/hvmloader/util.c
@@ -948,7 +948,8 @@ void hvmloader_acpi_build_tables(struct acpi_config *config,
if ( !strncmp(xenstore_read("platform/acpi_s4", "1"), "1", 1) )
config->table_flags |= ACPI_HAS_SSDT_S4;
- config->table_flags |= (ACPI_HAS_TCPA | ACPI_HAS_IOAPIC | ACPI_HAS_WAET);
+ config->table_flags |= (ACPI_HAS_TCPA | ACPI_HAS_IOAPIC |
+ ACPI_HAS_WAET | ACPI_HAS_PMTIMER);
config->tis_hdr = (uint16_t *)ACPI_TIS_HDR_ADDRESS;
diff --git a/tools/libacpi/build.c b/tools/libacpi/build.c
index 47dae01..e1fd381 100644
--- a/tools/libacpi/build.c
+++ b/tools/libacpi/build.c
@@ -574,6 +574,11 @@ int acpi_build_tables(struct acpi_ctxt *ctxt, struct acpi_config *config)
fadt = ctxt->mem_ops.alloc(ctxt, sizeof(struct acpi_20_fadt), 16);
if (!fadt) goto oom;
+ if ( !(config->table_flags & ACPI_HAS_PMTIMER) )
+ {
+ Fadt.pm_tmr_blk = Fadt.pm_tmr_len = 0;
+ memset(&Fadt.x_pm_tmr_blk, 0, sizeof(Fadt.x_pm_tmr_blk));
+ }
memcpy(fadt, &Fadt, sizeof(struct acpi_20_fadt));
fadt->dsdt = ctxt->mem_ops.v2p(ctxt, dsdt);
fadt->x_dsdt = ctxt->mem_ops.v2p(ctxt, dsdt);
diff --git a/tools/libacpi/libacpi.h b/tools/libacpi/libacpi.h
index 1d388f9..bda692e 100644
--- a/tools/libacpi/libacpi.h
+++ b/tools/libacpi/libacpi.h
@@ -30,6 +30,7 @@
#define ACPI_HAS_TCPA (1<<7)
#define ACPI_HAS_IOAPIC (1<<8)
#define ACPI_HAS_WAET (1<<9)
+#define ACPI_HAS_PMTIMER (1<<10)
struct xen_vmemrange;
struct acpi_numa {
--
2.7.4
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
next prev parent reply other threads:[~2016-11-21 21:00 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-21 21:00 [PATCH v3 00/11] PVH VCPU hotplug support Boris Ostrovsky
2016-11-21 21:00 ` [PATCH v3 01/11] x86/domctl: Add XEN_DOMCTL_set_avail_vcpus Boris Ostrovsky
2016-11-22 10:31 ` Jan Beulich
2016-11-22 10:39 ` Jan Beulich
2016-11-22 12:34 ` Boris Ostrovsky
2016-11-22 13:59 ` Jan Beulich
2016-11-22 14:37 ` Boris Ostrovsky
2016-11-22 15:07 ` Jan Beulich
2016-11-22 15:43 ` Boris Ostrovsky
2016-11-22 16:01 ` Jan Beulich
[not found] ` <a4ac4c28-833b-df5f-ce34-1fa72f7c4cd2@oracle.com>
2016-11-22 23:47 ` Boris Ostrovsky
2016-11-23 8:09 ` Jan Beulich
2016-11-23 13:33 ` Boris Ostrovsky
2016-11-23 13:58 ` Jan Beulich
2016-11-23 14:16 ` Boris Ostrovsky
2016-11-25 18:16 ` Boris Ostrovsky
2016-11-28 7:59 ` Jan Beulich
2016-11-22 12:19 ` Boris Ostrovsky
2016-11-21 21:00 ` [PATCH v3 02/11] acpi: Define ACPI IO registers for PVH guests Boris Ostrovsky
2016-11-22 10:37 ` Jan Beulich
2016-11-22 12:28 ` Boris Ostrovsky
2016-11-22 14:07 ` Jan Beulich
2016-11-22 14:53 ` Boris Ostrovsky
2016-11-22 15:13 ` Jan Beulich
2016-11-22 15:52 ` Boris Ostrovsky
2016-11-22 16:02 ` Jan Beulich
2016-11-21 21:00 ` [PATCH v3 03/11] pvh: Set online VCPU map to avail_vcpus Boris Ostrovsky
2016-11-21 21:00 ` Boris Ostrovsky [this message]
2016-11-21 21:00 ` [PATCH v3 05/11] acpi: Power and Sleep ACPI buttons are not emulated for PVH guests Boris Ostrovsky
2016-11-21 21:00 ` [PATCH v3 06/11] acpi: PVH guests need _E02 method Boris Ostrovsky
2016-11-22 9:13 ` Jan Beulich
2016-11-22 20:20 ` Konrad Rzeszutek Wilk
2016-11-21 21:00 ` [PATCH v3 07/11] pvh/ioreq: Install handlers for ACPI-related PVH IO accesses Boris Ostrovsky
2016-11-22 11:34 ` Jan Beulich
2016-11-22 12:38 ` Boris Ostrovsky
2016-11-22 14:08 ` Jan Beulich
2016-11-28 15:16 ` Boris Ostrovsky
2016-11-28 15:48 ` Roger Pau Monné
2016-11-21 21:00 ` [PATCH v3 08/11] pvh/acpi: Handle ACPI accesses for PVH guests Boris Ostrovsky
2016-11-22 14:11 ` Paul Durrant
2016-11-22 15:01 ` Jan Beulich
2016-11-22 15:30 ` Boris Ostrovsky
2016-11-22 16:05 ` Jan Beulich
2016-11-22 16:33 ` Boris Ostrovsky
2016-11-21 21:00 ` [PATCH v3 09/11] events/x86: Define SCI virtual interrupt Boris Ostrovsky
2016-11-22 15:25 ` Jan Beulich
2016-11-22 15:57 ` Boris Ostrovsky
2016-11-22 16:07 ` Jan Beulich
2016-11-21 21:00 ` [PATCH v3 10/11] pvh: Send an SCI on VCPU hotplug event Boris Ostrovsky
2016-11-22 15:32 ` Jan Beulich
2016-11-21 21:00 ` [PATCH v3 11/11] docs: Describe PVHv2's VCPU hotplug procedure Boris Ostrovsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1479762047-29431-5-git-send-email-boris.ostrovsky@oracle.com \
--to=boris.ostrovsky@oracle.com \
--cc=andrew.cooper3@citrix.com \
--cc=ian.jackson@eu.citrix.com \
--cc=jbeulich@suse.com \
--cc=roger.pau@citrix.com \
--cc=wei.liu2@citrix.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).