From: Daniel Kiper <daniel.kiper@oracle.com>
To: xen-devel@lists.xenproject.org
Cc: jgross@suse.com, sstabellini@kernel.org,
andrew.cooper3@citrix.com, cardoe@cardoe.com,
marcos.matsunaga@oracle.com, pgnet.dev@gmail.com,
ning.sun@intel.com, julien.grall@arm.com, jbeulich@suse.com,
qiaowei.ren@intel.com, gang.wei@intel.com, fu.wei@linaro.org
Subject: [PATCH v14 8/9] x86/boot: rename sym_phys() to sym_offs()
Date: Thu, 2 Feb 2017 23:01:18 +0100 [thread overview]
Message-ID: <1486072879-31637-9-git-send-email-daniel.kiper@oracle.com> (raw)
In-Reply-To: <1486072879-31637-1-git-send-email-daniel.kiper@oracle.com>
This way macro name better describes its function.
Currently it is used to calculate symbol offset in
relation to the beginning of Xen image mapping.
However, value returned by sym_offs() for a given
symbol is not always equal its physical address.
There is no functional change.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
---
v8 - suggestions/fixes:
- improve commit message
(suggested by Jan Beulich).
---
xen/arch/x86/boot/head.S | 38 +++++++++++++++++++-------------------
xen/arch/x86/boot/trampoline.S | 2 +-
xen/arch/x86/boot/wakeup.S | 4 ++--
xen/arch/x86/boot/x86_64.S | 18 +++++++++---------
4 files changed, 31 insertions(+), 31 deletions(-)
diff --git a/xen/arch/x86/boot/head.S b/xen/arch/x86/boot/head.S
index 156518c..a1f69c0 100644
--- a/xen/arch/x86/boot/head.S
+++ b/xen/arch/x86/boot/head.S
@@ -12,9 +12,9 @@
.text
.code32
-#define sym_phys(sym) ((sym) - __XEN_VIRT_START)
-#define sym_esi(sym) sym_phys(sym)(%esi)
-#define sym_fs(sym) %fs:sym_phys(sym)
+#define sym_offs(sym) ((sym) - __XEN_VIRT_START)
+#define sym_esi(sym) sym_offs(sym)(%esi)
+#define sym_fs(sym) %fs:sym_offs(sym)
#define BOOT_CS32 0x0008
#define BOOT_CS64 0x0010
@@ -97,7 +97,7 @@ multiboot2_header_start:
/* EFI64 Multiboot2 entry point. */
mb2ht_init MB2_HT(ENTRY_ADDRESS_EFI64), MB2_HT(OPTIONAL), \
- sym_phys(__efi64_mb2_start)
+ sym_offs(__efi64_mb2_start)
/* Multiboot2 header end tag. */
mb2ht_init MB2_HT(END), MB2_HT(REQUIRED)
@@ -119,7 +119,7 @@ multiboot2_header_start:
gdt_boot_descr:
.word 7*8-1
gdt_boot_base:
- .long sym_phys(trampoline_gdt)
+ .long sym_offs(trampoline_gdt)
.long 0 /* Needed for 64-bit lgdt */
vga_text_buffer:
@@ -131,23 +131,23 @@ efi_platform:
.section .init.text, "ax", @progbits
bad_cpu:
- add $sym_phys(.Lbad_cpu_msg),%esi # Error message
+ add $sym_offs(.Lbad_cpu_msg),%esi # Error message
jmp .Lget_vtb
not_multiboot:
- add $sym_phys(.Lbad_ldr_msg),%esi # Error message
+ add $sym_offs(.Lbad_ldr_msg),%esi # Error message
jmp .Lget_vtb
.Lmb2_no_st:
- add $sym_phys(.Lbad_ldr_nst),%esi # Error message
+ add $sym_offs(.Lbad_ldr_nst),%esi # Error message
jmp .Lget_vtb
.Lmb2_no_ih:
- add $sym_phys(.Lbad_ldr_nih),%esi # Error message
+ add $sym_offs(.Lbad_ldr_nih),%esi # Error message
jmp .Lget_vtb
.Lmb2_no_bs:
- add $sym_phys(.Lbad_ldr_nbs),%esi # Error message
+ add $sym_offs(.Lbad_ldr_nbs),%esi # Error message
xor %edi,%edi # No VGA text buffer
jmp .Lsend_chr
.Lmb2_efi_ia_32:
- add $sym_phys(.Lbad_efi_msg),%esi # Error message
+ add $sym_offs(.Lbad_efi_msg),%esi # Error message
xor %edi,%edi # No VGA text buffer
jmp .Lsend_chr
.Lget_vtb:
@@ -358,7 +358,7 @@ __start:
cli
/* Load default Xen image load base address. */
- mov $sym_phys(__image_base__),%esi
+ mov $sym_offs(__image_base__),%esi
/* Bootloaders may set multiboot{1,2}.mem_lower to a nonzero value. */
xor %edx,%edx
@@ -530,8 +530,8 @@ trampoline_setup:
jnz 1f
/* Initialize BSS (no nasty surprises!). */
- mov $sym_phys(__bss_start),%edi
- mov $sym_phys(__bss_end),%ecx
+ mov $sym_offs(__bss_start),%edi
+ mov $sym_offs(__bss_end),%ecx
push %fs
pop %es
sub %edi,%ecx
@@ -604,22 +604,22 @@ trampoline_setup:
/* Apply relocations to bootstrap trampoline. */
mov sym_fs(trampoline_phys),%edx
- mov $sym_phys(__trampoline_rel_start),%edi
+ mov $sym_offs(__trampoline_rel_start),%edi
1:
mov %fs:(%edi),%eax
add %edx,%fs:(%edi,%eax)
add $4,%edi
- cmp $sym_phys(__trampoline_rel_stop),%edi
+ cmp $sym_offs(__trampoline_rel_stop),%edi
jb 1b
/* Patch in the trampoline segment. */
shr $4,%edx
- mov $sym_phys(__trampoline_seg_start),%edi
+ mov $sym_offs(__trampoline_seg_start),%edi
1:
mov %fs:(%edi),%eax
mov %dx,%fs:(%edi,%eax)
add $4,%edi
- cmp $sym_phys(__trampoline_seg_stop),%edi
+ cmp $sym_offs(__trampoline_seg_stop),%edi
jb 1b
/* Do not parse command line on EFI platform here. */
@@ -645,7 +645,7 @@ trampoline_setup:
push %eax
/* Copy bootstrap trampoline to low memory, below 1MB. */
- mov $sym_phys(trampoline_start),%esi
+ mov $sym_offs(trampoline_start),%esi
mov $((trampoline_end - trampoline_start) / 4),%ecx
rep movsl %fs:(%esi),%es:(%edi)
diff --git a/xen/arch/x86/boot/trampoline.S b/xen/arch/x86/boot/trampoline.S
index 64f8efd..b96607a 100644
--- a/xen/arch/x86/boot/trampoline.S
+++ b/xen/arch/x86/boot/trampoline.S
@@ -92,7 +92,7 @@ trampoline_protmode_entry:
mov %ecx,%cr4
/* Load pagetable base register. */
- mov $sym_phys(idle_pg_table),%eax
+ mov $sym_offs(idle_pg_table),%eax
add bootsym_rel(trampoline_xen_phys_start,4,%eax)
mov %eax,%cr3
diff --git a/xen/arch/x86/boot/wakeup.S b/xen/arch/x86/boot/wakeup.S
index 08ea9b2..42d57ab 100644
--- a/xen/arch/x86/boot/wakeup.S
+++ b/xen/arch/x86/boot/wakeup.S
@@ -120,7 +120,7 @@ wakeup_32:
mov $bootsym_rel(wakeup_stack, 4, %esp)
# check saved magic again
- mov $sym_phys(saved_magic), %eax
+ mov $sym_offs(saved_magic),%eax
add bootsym_rel(trampoline_xen_phys_start, 4, %eax)
mov (%eax), %eax
cmp $0x9abcdef0, %eax
@@ -133,7 +133,7 @@ wakeup_32:
mov %ecx, %cr4
/* Load pagetable base register */
- mov $sym_phys(idle_pg_table),%eax
+ mov $sym_offs(idle_pg_table),%eax
add bootsym_rel(trampoline_xen_phys_start,4,%eax)
mov %eax,%cr3
diff --git a/xen/arch/x86/boot/x86_64.S b/xen/arch/x86/boot/x86_64.S
index d07c360..b6f2792 100644
--- a/xen/arch/x86/boot/x86_64.S
+++ b/xen/arch/x86/boot/x86_64.S
@@ -112,7 +112,7 @@ GLOBAL(__page_tables_start)
* actualy mapped (mostly using superpages). Uses 4x 4k pages.
*/
GLOBAL(l2_identmap)
- .quad sym_phys(l1_identmap) + __PAGE_HYPERVISOR
+ .quad sym_offs(l1_identmap) + __PAGE_HYPERVISOR
idx = 1
.rept 7
.quad (idx << L2_PAGETABLE_SHIFT) | PAGE_HYPERVISOR | _PAGE_PSE
@@ -130,7 +130,7 @@ GLOBAL(l2_xenmap)
.quad 0
idx = 1
.rept 7
- .quad sym_phys(__image_base__) + (idx << L2_PAGETABLE_SHIFT) + (PAGE_HYPERVISOR | _PAGE_PSE)
+ .quad sym_offs(__image_base__) + (idx << L2_PAGETABLE_SHIFT) + (PAGE_HYPERVISOR | _PAGE_PSE)
idx = idx + 1
.endr
.fill L2_PAGETABLE_ENTRIES - 8, 8, 0
@@ -141,7 +141,7 @@ l2_fixmap:
idx = 0
.rept L2_PAGETABLE_ENTRIES
.if idx == l2_table_offset(FIXADDR_TOP - 1)
- .quad sym_phys(l1_fixmap) + __PAGE_HYPERVISOR
+ .quad sym_offs(l1_fixmap) + __PAGE_HYPERVISOR
.else
.quad 0
.endif
@@ -153,7 +153,7 @@ l2_fixmap:
l3_identmap:
idx = 0
.rept 4
- .quad sym_phys(l2_identmap) + (idx << PAGE_SHIFT) + __PAGE_HYPERVISOR
+ .quad sym_offs(l2_identmap) + (idx << PAGE_SHIFT) + __PAGE_HYPERVISOR
idx = idx + 1
.endr
.fill L3_PAGETABLE_ENTRIES - 4, 8, 0
@@ -164,9 +164,9 @@ l3_xenmap:
idx = 0
.rept L3_PAGETABLE_ENTRIES
.if idx == l3_table_offset(XEN_VIRT_START)
- .quad sym_phys(l2_xenmap) + __PAGE_HYPERVISOR
+ .quad sym_offs(l2_xenmap) + __PAGE_HYPERVISOR
.elseif idx == l3_table_offset(FIXADDR_TOP - 1)
- .quad sym_phys(l2_fixmap) + __PAGE_HYPERVISOR
+ .quad sym_offs(l2_fixmap) + __PAGE_HYPERVISOR
.else
.quad 0
.endif
@@ -176,13 +176,13 @@ l3_xenmap:
/* Top-level master (and idle-domain) page directory. */
GLOBAL(idle_pg_table)
- .quad sym_phys(l3_bootmap) + __PAGE_HYPERVISOR
+ .quad sym_offs(l3_bootmap) + __PAGE_HYPERVISOR
idx = 1
.rept L4_PAGETABLE_ENTRIES - 1
.if idx == l4_table_offset(DIRECTMAP_VIRT_START)
- .quad sym_phys(l3_identmap) + __PAGE_HYPERVISOR
+ .quad sym_offs(l3_identmap) + __PAGE_HYPERVISOR
.elseif idx == l4_table_offset(XEN_VIRT_START)
- .quad sym_phys(l3_xenmap) + __PAGE_HYPERVISOR
+ .quad sym_offs(l3_xenmap) + __PAGE_HYPERVISOR
.else
.quad 0
.endif
--
1.7.10.4
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
next prev parent reply other threads:[~2017-02-02 22:02 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-02 22:01 [PATCH v14 0/9] x86: multiboot2 protocol support Daniel Kiper
2017-02-02 22:01 ` [PATCH v14 1/9] x86: add " Daniel Kiper
2017-02-02 22:01 ` [PATCH v14 2/9] efi: build xen.gz with EFI code Daniel Kiper
2017-02-02 22:41 ` Daniel Kiper
2017-02-02 22:46 ` Doug Goldstein
2017-02-02 22:56 ` Daniel Kiper
2017-02-02 22:01 ` [PATCH v14 3/9] efi: create new early memory allocator Daniel Kiper
2017-02-02 22:01 ` [PATCH v14 4/9] x86: add multiboot2 protocol support for EFI platforms Daniel Kiper
2017-02-02 22:43 ` Daniel Kiper
2017-02-03 10:22 ` Jan Beulich
2017-02-06 10:18 ` Jan Beulich
2017-02-08 13:44 ` Daniel Kiper
2017-02-08 13:52 ` Jan Beulich
2017-02-02 22:01 ` [PATCH v14 5/9] x86: change default load address from 1 MiB to 2 MiB Daniel Kiper
2017-02-02 22:01 ` [PATCH v14 6/9] x86/setup: use XEN_IMG_OFFSET instead of Daniel Kiper
2017-02-02 22:01 ` [PATCH v14 7/9] x86: make Xen early boot code relocatable Daniel Kiper
2017-02-02 22:01 ` Daniel Kiper [this message]
2017-02-02 22:01 ` [PATCH v14 9/9] x86: add multiboot2 protocol support for relocatable images Daniel Kiper
2017-02-02 22:27 ` [PATCH v14 0/9] x86: multiboot2 protocol support Doug Goldstein
2017-02-02 22:47 ` Daniel Kiper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1486072879-31637-9-git-send-email-daniel.kiper@oracle.com \
--to=daniel.kiper@oracle.com \
--cc=andrew.cooper3@citrix.com \
--cc=cardoe@cardoe.com \
--cc=fu.wei@linaro.org \
--cc=gang.wei@intel.com \
--cc=jbeulich@suse.com \
--cc=jgross@suse.com \
--cc=julien.grall@arm.com \
--cc=marcos.matsunaga@oracle.com \
--cc=ning.sun@intel.com \
--cc=pgnet.dev@gmail.com \
--cc=qiaowei.ren@intel.com \
--cc=sstabellini@kernel.org \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).